Difference between revisions of "/usr/bin/"

From GhostBSD Wiki
Jump to: navigation, search
Line 31: Line 31:
 
|/usr/bin/awk||[https://www.freebsd.org/cgi/man.cgi?query=awk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html awk] scans each input file for lines that match any of a set of patterns      specified literally in prog or in one or more files specified as -f    progfile. With each pattern there can be an associated action that will    be performed when a line of a file matches the pattern.
 
|/usr/bin/awk||[https://www.freebsd.org/cgi/man.cgi?query=awk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html awk] scans each input file for lines that match any of a set of patterns      specified literally in prog or in one or more files specified as -f    progfile. With each pattern there can be an associated action that will    be performed when a line of a file matches the pattern.
 
|-
 
|-
|/usr/bin/b64decode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII    data.  The b64encode utility is synonymous with uuencode with the -m flag
+
|/usr/bin/b64decode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII    data.  The b64encode utility is synonymous with uuencode with the -m flag  
specified. The b64decode utility is synonymous with uudecode with the -m    flag specified.
+
specified. The b64decode utility is synonymous with uudecode with the -m    flag specified.
 
|-
 
|-
|/usr/bin/b64encode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII    data.  The b64encode utility is synonymous with uuencode with the -m flag
+
|/usr/bin/b64encode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII    data.  The b64encode utility is synonymous with uuencode with the -m flag specified. The b64decode utility is synonymous with uudecode with the -m    flag specified.
specified. The b64decode utility is synonymous with uudecode with the -m    flag specified.
+
 
|-
 
|-
 
|/usr/bin/banner||[https://www.freebsd.org/cgi/man.cgi?query=banner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Banner] prints a large, high quality banner on the standard output. If      the message is omitted, it prompts for and reads one line of its standard      input.
 
|/usr/bin/banner||[https://www.freebsd.org/cgi/man.cgi?query=banner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Banner] prints a large, high quality banner on the standard output. If      the message is omitted, it prompts for and reads one line of its standard      input.
Line 99: Line 98:
 
be used.
 
be used.
 
|-
 
|-
|/usr/bin/cal||
+
|/usr/bin/cal||[https://www.freebsd.org/cgi/man.cgi?query=cal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cal, ncal] -- displays a calendar and the date of Easter
 
|-
 
|-
|/usr/bin/calenda||
+
|/usr/bin/calenda||Unknown command calenda
|-r
+
|/usr/bin/cap_mkdb||
+
 
|-
 
|-
|/usr/bin/CC||
+
|/usr/bin/cap_mkdb||The [https://www.freebsd.org/cgi/man.cgi?query=cap_mkdb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cap_mkdb] utility builds a hashed database out of the [https://www.freebsd.org/cgi/man.cgi?query=getcap&sektion=3&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports getcap(3)] logical database constructed by the concatenation of the specified files.
 +
|-
 +
|/usr/bin/CC||[https://www.freebsd.org/cgi/man.cgi?query=cc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html clang]  is  a C, C++, and Objective-C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
 
|-
 
|-
 
|/usr/bin/cd||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|/usr/bin/cd||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|-
 
|-
|/usr/bin/chat||
+
|/usr/bin/chat||The [https://www.freebsd.org/cgi/man.cgi?query=chat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chat] program defines a conversational exchange between the computer and the modem.  Its primary purpose is to establish the connection between the Point-to-Point Protocol Daemon (pppd) and the remote's pppd process.
 
|-
 
|-
|/usr/bin/chfn||
+
|/usr/bin/chfn||chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [https://www.freebsd.org/cgi/man.cgi?query=chfn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html]
 
|-
 
|-
|/usr/bin/chgrp||
+
|/usr/bin/chgrp||The [ttps://www.freebsd.org/cgi/man.cgi?query=chgrp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chgrp] utility sets the group ID of the file named by each file oper  and to the group ID specified by the group operand.
 
|-
 
|-
|/usr/bin/chkey||
+
|/usr/bin/chkey||The [https://www.freebsd.org/cgi/man.cgi?query=chkey&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chkey] utility prompts the user for their login password, and uses it    to encrypt a new encryption key for the user to be stored in the [https://www.freebsd.org/cgi/man.cgi?query=publickey&sektion=5&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports publickey(5)] database.
 
|-
 
|-
|/usr/bin/chpass||
+
|/usr/bin/chpass||chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [https://www.freebsd.org/cgi/man.cgi?query=chfn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html]
 
|-
 
|-
|/usr/bin/chsh||
+
|/usr/bin/chsh||chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [https://www.freebsd.org/cgi/man.cgi?query=chfn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html]
 
|-
 
|-
|/usr/bin/cksum||
+
|/usr/bin/cksum||The [ttps://www.freebsd.org/cgi/man.cgi?query=cksum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cksum] utility writes to the standard output three whitespace sepa rated fields for each input file. These fields are a checksum CRC, the
 +
total number of octets in the file and the file name.  If no file name is specified, the standard input is used and no file name is written.
 
|-
 
|-
|/usr/bin/clear||
+
|/usr/bin/clear||[https://www.freebsd.org/cgi/man.cgi?query=clear&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tput, clear] -- terminal capability interface
 
|-
 
|-
|/usr/bin/cmp||
+
|/usr/bin/cmp||The [https://www.freebsd.org/cgi/man.cgi?query=cmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cmp] utility compares two files of any type and writes the results to the standard output.  By default, cmp is silent if the files are the same; if they differ, the byte and line number at which the first difference occurred is reported.
 
|-
 
|-
|/usr/bin/col||
+
|/usr/bin/col||The [https://www.freebsd.org/cgi/man.cgi?query=col&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html col] utility filters out reverse (and half reverse) line feeds so that the output is in the correct order with only forward and half forward line feeds, and replaces white-space characters with tabs where possible. This can be useful in processing the output of [https://www.freebsd.org/cgi/man.cgi?query=nroff&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports nroff(1)] and [https://www.freebsd.org/cgi/man.cgi?query=tbl&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports tbl(1)].
 
|-
 
|-
|/usr/bin/colldef||
+
|/usr/bin/colldef||The [https://www.freebsd.org/cgi/man.cgi?query=colldef&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html colldef] utility converts a collation sequence source definition into  a format usable by the strxfrm() and strcoll() functions. It is used to  define the many ways in which strings can be ordered and collated
 
|-
 
|-
|/usr/bin/colrm||
+
|/usr/bin/colrm||The [https://www.freebsd.org/cgi/man.cgi?query=colrm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html colrm] utility removes selected columns from the lines of a file.  A  column is defined as a single character in a line. Input is read from the standard input.  Output is written to the standard output.
 +
 
 
|-
 
|-
|/usr/bin/column||
+
|/usr/bin/column||The [https://www.freebsd.org/cgi/man.cgi?query=column&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html column] utility formats its input into multiple columns.  Rows are filled before columns.  Input is taken from file operands, or, by default, from the standard input.  Empty lines are ignored.
 
|-
 
|-
|/usr/bin/comm||
+
|/usr/bin/comm||The [https://www.freebsd.org/cgi/man.cgi?query=comm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html comm] utility reads file1 and file2, which should be sorted lexically, and produces three text columns as output: lines only in file1; lines only in file2; and lines in both files.
 +
 
 
|-
 
|-
 
|/usr/bin/command||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|/usr/bin/command||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
Line 141: Line 143:
 
|/usr/bin/compile_et||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|/usr/bin/compile_et||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|-
 
|-
|/usr/bin/compress||
+
|/usr/bin/compress||[https://www.freebsd.org/cgi/man.cgi?query=uncompress&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html compress, uncompress] -- compress and expand data
 
|-
 
|-
 
|/usr/bin/cpio||
 
|/usr/bin/cpio||
Line 209: Line 211:
 
|/usr/bin/ex||
 
|/usr/bin/ex||
 
|-
 
|-
|/usr/bin/expand||
+
|/usr/bin/expand||[https://www.freebsd.org/cgi/man.cgi?query=expand&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html expand, unexpand] -- expand tabs to spaces, and vice versa
 
|-
 
|-
|/usr/bin/factor||
+
|/usr/bin/factor||[https://www.freebsd.org/cgi/man.cgi?query=factor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Factor]  prints  number  and its prime factors, each repeated the proper
 +
      number of times.
 
|-
 
|-
 
|/usr/bin/false||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|/usr/bin/false||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
Line 217: Line 220:
 
|/usr/bin/fc||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|/usr/bin/fc||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|-
 
|-
|/usr/bin/fetch||
+
|/usr/bin/fetch||The [ttps://www.freebsd.org/cgi/man.cgi?query=fetch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fetch] utility provides a command-line interface to the [https://www.freebsd.org/cgi/man.cgi?query=fetch&sektion=3&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports fetch(3)] library.  Its purpose is to retrieve the file(s) pointed to by the URL(s)
 +
    on the command line.
 
|-
 
|-
 
|/usr/bin/fg||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
 
|/usr/bin/fg||Shell builtin commands are commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in a subshell if it occurs as any component of a    pipeline except the last.
Line 499: Line 503:
 
|/usr/bin/nc||
 
|/usr/bin/nc||
 
|-
 
|-
|/usr/bin/ncal||
+
|/usr/bin/ncal||[https://www.freebsd.org/cgi/man.cgi?query=cal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cal, ncal] -- displays a calendar and the date of Easter
 
|-
 
|-
 
|/usr/bin/netstat||
 
|/usr/bin/netstat||
Line 705: Line 709:
 
|/usr/bin/su||
 
|/usr/bin/su||
 
|-
 
|-
|/usr/bin/sum||
+
|/usr/bin/sum||The [ttps://www.freebsd.org/cgi/man.cgi?query=cksum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sum] utility is identical to the cksum utility, except that it de    faults to using historic algorithm 1, as described below. It is provided for compatibility only.
 
|-
 
|-
 
|/usr/bin/svnlite||
 
|/usr/bin/svnlite||
Line 757: Line 761:
 
|/usr/bin/touch||
 
|/usr/bin/touch||
 
|-
 
|-
|/usr/bin/tput||
+
|/usr/bin/tput||[https://www.freebsd.org/cgi/man.cgi?query=clear&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tput, clear] -- terminal capability interface
 
|-
 
|-
 
|/usr/bin/tr||
 
|/usr/bin/tr||
Line 789: Line 793:
 
|/usr/bin/uname||
 
|/usr/bin/uname||
 
|-
 
|-
|/usr/bin/uncompress||
+
|/usr/bin/uncompress||[https://www.freebsd.org/cgi/man.cgi?query=uncompress&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html compress, uncompress] -- compress and expand data
 
|-
 
|-
|/usr/bin/unexpand||
+
|/usr/bin/unexpand||[https://www.freebsd.org/cgi/man.cgi?query=expand&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html expand, unexpand] -- expand tabs to spaces, and vice versa
 
|-
 
|-
 
|/usr/bin/unifdef||
 
|/usr/bin/unifdef||
Line 889: Line 893:
 
|/usr/bin/xzless||
 
|/usr/bin/xzless||
 
|-
 
|-
|/usr/bin/yacc||
+
|/usr/bin/yacc||[https://www.freebsd.org/cgi/man.cgi?query=yacc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Yacc] reads the grammar specification in the file filename and generates        an  [https://www.freebsd.org/cgi/man.cgi?query=LALR&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports LALR(1)]  parser  for it.
 
|-
 
|-
|/usr/bin/yes||
+
|/usr/bin/yes||[https://www.freebsd.org/cgi/man.cgi?query=yes&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html yes] -- be repetitively affirmative
 +
 
 
|-
 
|-
|/usr/bin/ypcat||
+
|/usr/bin/ypcat||[https://www.freebsd.org/cgi/man.cgi?query=ypcat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ypcat] -- print the values of all keys in a NIS database
 
|-
 
|-
|/usr/bin/ypchfn||
+
|/usr/bin/ypchfn||chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [https://www.freebsd.org/cgi/man.cgi?query=chfn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html]
 
|-
 
|-
|/usr/bin/ypchpass||
+
|/usr/bin/ypchpass||chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [https://www.freebsd.org/cgi/man.cgi?query=chfn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html]
 
|-
 
|-
|/usr/bin/ypchsh||
+
|/usr/bin/ypchsh||chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [https://www.freebsd.org/cgi/man.cgi?query=chfn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html]
 
|-
 
|-
 
|/usr/bin/ypmatch||
 
|/usr/bin/ypmatch||

Revision as of 09:46, 14 February 2020

Welcome to Icon Disti GhostBSD.png /usr/bin/.
This page is in maintenance!
Please do not change this page without to contact the author or use Discussion!
Directory Description
/usr/bin/addr2line The addr2line utility translates program addresses specified by the command line arguments hexaddress to their corresponding source file names and line numbers. If no arguments are given to addr2line, it will read these addresses from standard input.
/usr/bin/alias a shell built-in command The shell maintains a list of aliases which can be set, unset and printed by the alias and unalias commands. See [1]
/usr/bin/apply [The apply utility runs the named command on each argument argument in turn.
/usr/bin/apropos The apropos and whatis utilities query manual page databases generated by makewhatis(8), evaluating expression for each file in each database. By default, they display the names, section numbers, and description lines of all matching manuals.
/usr/bin/ar The ar utility creates and maintains groups of files combined into an ar chive. Once an archive has been created, new files can be added to it, and existing files can be extracted, deleted or replaced.
/usr/bin/as AS the portable GNU assembler
/usr/bin/asa The asa utility reads files sequentially, mapping FORTRAN carriage-control characters to line-printer control sequences, and writes them to the standard output.
/usr/bin/asn1_compile The ASN.1 library contains routines to handle ASN.1 encoding for SNMP. It supports only the restricted form of ASN.1 as required by SNMP.
/usr/bin/at The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/atq The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/atrm The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/awk awk scans each input file for lines that match any of a set of patterns specified literally in prog or in one or more files specified as -f progfile. With each pattern there can be an associated action that will be performed when a line of a file matches the pattern.
/usr/bin/b64decode [2] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag

specified. The b64decode utility is synonymous with uudecode with the -m flag specified.

/usr/bin/b64encode [3] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag specified. The b64decode utility is synonymous with uudecode with the -m flag specified.
/usr/bin/banner Banner prints a large, high quality banner on the standard output. If the message is omitted, it prompts for and reads one line of its standard input.
/usr/bin/basename basename, dirname return filename or directory portion of pathname
/usr/bin/batch The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/bc bc is an interactive processor for a language which resembles C but pro vides unlimited precision arithmetic. It takes input from any expressions on the command line and any files given, then reads the standard input.
/usr/bin/bg Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/biff The biff utility informs the system whether you want to be notified on your terminal when mail arrives.
/usr/bin/brandelf The brandelf utility marks an ELF binary to be run under a certain ABI for FreeBSD.
/usr/bin/bsdcat bsdcat typically takes a filename as an argument or reads standard input when used in a pipe. In both cases decompressed data it written to standard output.
/usr/bin/bsdcpio cpio copies files between archives and directories. This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom images and can create tar, pax, cpio, ar, and shar archives.
/usr/bin/bsdiff The bsdiff utility compares oldfile to newfile and writes to patchfile a binary patch suitable for use by bspatch(1). When ldfile and newfile are two versions of an executable program, the patches produced are on average a factor of five smaller than those produced by any other binary patch tool known to the author.
/usr/bin/bsdtar tar creates and manipulates streaming archive files. This implementation can extract from tar, pax, cpio, zip, jar, ar, xar, rpm, 7-zip, and ISO 9660 cdrom images and can create tar, pax, cpio, ar, zip, 7-zip, and shar archives.
/usr/bin/bsnmpget bsnmpget, bsnmpwalk and bsnmpset are simple tools for retrieving management information from and setting management information to a Simple Network Management Protocol (SNMP) agent.
/usr/bin/bsnmpset bsnmpget, bsnmpwalk and bsnmpset are simple tools for retrieving management information from and setting management information to a Simple Network Management Protocol (SNMP) agent.
/usr/bin/bsnmpwalk bsnmpget, bsnmpwalk and bsnmpset are simple tools for retrieving management information from and setting management information to a Simple Network Management Protocol (SNMP) agent.
/usr/bin/bspatch The bspatch utility generates newfile from oldfile and patchfile where patchfile is a binary patch built by bsdiff(1).
/usr/bin/bthost The bthost utility looks for information about Bluetooth hosts and Protocol Service Multiplexor (PSM) values. It gets this information from the /etc/bluetooth/hosts and /etc/bluetooth/protocols files.
/usr/bin/btsockstat The btsockstat utility symbolically displays the contents of various Bluetooth sockets related data structures. There are few output formats, depending on the options for the information presented. The btsockstat utility will print results to the standard output and error messages to the standard error.
/usr/bin/bunzip2 bzip2 compresses files using the Burrows-Wheeler block sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors.
/usr/bin/byacc Yacc reads the grammar specification in the file filename and generates an LALR(1) parser for it. The parsers consist of a set of LALR(1) parsing tables and a driver routine written in the C programming language. Yacc normally writes the parse tables and the driver routine to the file y.tab.c.
/usr/bin/bzcat bzcat - decompresses files to stdout
/usr/bin/bzegrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [4]
/usr/bin/bzfgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [5]
/usr/bin/bzgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [6]
/usr/bin/bzip2 bzip2 compresses files using the Burrows-Wheeler block sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors.
/usr/bin/bzip2recover bzip2 compresses files using the Burrows-Wheeler block sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors.
/usr/bin/bzless bzmore, bzless file perusal filter for crt viewing of bzip2 compressed text
/usr/bin/c89 c89 -- POSIX.2 C language compiler
/usr/bin/c99 c99 -- standard C language compiler
/usr/bin/caesar The caesar utility attempts to decrypt caesar ciphers using English letter frequency statistics. Caesar reads from the standard input and writes to the standard output.

The optional numerical argument rotation may be used to specify a specific rotation value. If invoked as rot13, a rotation value of 13 will be used.

/usr/bin/cal cal, ncal -- displays a calendar and the date of Easter
/usr/bin/calenda Unknown command calenda
/usr/bin/cap_mkdb The cap_mkdb utility builds a hashed database out of the getcap(3) logical database constructed by the concatenation of the specified files.
/usr/bin/CC clang is a C, C++, and Objective-C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
/usr/bin/cd Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/chat The chat program defines a conversational exchange between the computer and the modem. Its primary purpose is to establish the connection between the Point-to-Point Protocol Daemon (pppd) and the remote's pppd process.
/usr/bin/chfn chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [7]
/usr/bin/chgrp The [ttps://www.freebsd.org/cgi/man.cgi?query=chgrp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chgrp] utility sets the group ID of the file named by each file oper and to the group ID specified by the group operand.
/usr/bin/chkey The chkey utility prompts the user for their login password, and uses it to encrypt a new encryption key for the user to be stored in the publickey(5) database.
/usr/bin/chpass chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [8]
/usr/bin/chsh chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [9]
/usr/bin/cksum The [ttps://www.freebsd.org/cgi/man.cgi?query=cksum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cksum] utility writes to the standard output three whitespace sepa rated fields for each input file. These fields are a checksum CRC, the

total number of octets in the file and the file name. If no file name is specified, the standard input is used and no file name is written.

/usr/bin/clear tput, clear -- terminal capability interface
/usr/bin/cmp The cmp utility compares two files of any type and writes the results to the standard output. By default, cmp is silent if the files are the same; if they differ, the byte and line number at which the first difference occurred is reported.
/usr/bin/col The col utility filters out reverse (and half reverse) line feeds so that the output is in the correct order with only forward and half forward line feeds, and replaces white-space characters with tabs where possible. This can be useful in processing the output of nroff(1) and tbl(1).
/usr/bin/colldef The colldef utility converts a collation sequence source definition into a format usable by the strxfrm() and strcoll() functions. It is used to define the many ways in which strings can be ordered and collated
/usr/bin/colrm The colrm utility removes selected columns from the lines of a file. A column is defined as a single character in a line. Input is read from the standard input. Output is written to the standard output.
/usr/bin/column The column utility formats its input into multiple columns. Rows are filled before columns. Input is taken from file operands, or, by default, from the standard input. Empty lines are ignored.
/usr/bin/comm The comm utility reads file1 and file2, which should be sorted lexically, and produces three text columns as output: lines only in file1; lines only in file2; and lines in both files.
/usr/bin/command Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/compile_et Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/compress compress, uncompress -- compress and expand data
/usr/bin/cpio
/usr/bin/cpp
/usr/bin/cpuset
/usr/bin/crontab
/usr/bin/crunchgen
/usr/bin/crunchide
/usr/bin/crypt
/usr/bin/csplit
/usr/bin/ctags
/usr/bin/ctfconvert
/usr/bin/ctfdump
/usr/bin/ctfmerge
/usr/bin/ctlstat
/usr/bin/cu
/usr/bin/cut
/usr/bin/dc
/usr/bin/dialog
/usr/bin/diff
/usr/bin/diff3
/usr/bin/dirname basename, dirname return filename or directory portion of pathname
/usr/bin/dpv
/usr/bin/drill
/usr/bin/dtc
/usr/bin/du
/usr/bin/edit
/usr/bin/ee
/usr/bin/egrep
/usr/bin/elf2aout
/usr/bin/elfdump
/usr/bin/enigma
/usr/bin/env
/usr/bin/etdump
/usr/bin/ex
/usr/bin/expand expand, unexpand -- expand tabs to spaces, and vice versa
/usr/bin/factor Factor prints number and its prime factors, each repeated the proper
      number of times.	
/usr/bin/false Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/fc Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/fetch The [ttps://www.freebsd.org/cgi/man.cgi?query=fetch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fetch] utility provides a command-line interface to the fetch(3) library. Its purpose is to retrieve the file(s) pointed to by the URL(s)
    on	the command line.
/usr/bin/fg Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/fgrep
/usr/bin/file
/usr/bin/file2c
/usr/bin/find
/usr/bin/finger
/usr/bin/flex
/usr/bin/flex++
/usr/bin/fmt
/usr/bin/fold
/usr/bin/fortune
/usr/bin/from
/usr/bin/fstat
/usr/bin/fsync
/usr/bin/ftp
/usr/bin/fuser
/usr/bin/gate-ftp
/usr/bin/gcore
/usr/bin/gencat
/usr/bin/getaddrinfo
/usr/bin/getconf
/usr/bin/getent
/usr/bin/getopt
/usr/bin/getopts Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/gnugrep
/usr/bin/gprof
/usr/bin/grdc
/usr/bin/grep
/usr/bin/groups
/usr/bin/gunzip
/usr/bin/gzcat
/usr/bin/gzexe
/usr/bin/gzip
/usr/bin/hash
/usr/bin/hd
/usr/bin/head
/usr/bin/hexdump
/usr/bin/host
/usr/bin/hxtool
/usr/bin/ibstat
/usr/bin/ibv_asyncwatch
/usr/bin/ibv_devices
/usr/bin/ibv_devinfo
/usr/bin/ibv_rc_pingpong
/usr/bin/ibv_srq_pingpong
/usr/bin/ibv_uc_pingpong
/usr/bin/ibv_ud_pingpong
/usr/bin/iconv
/usr/bin/id
/usr/bin/ident
/usr/bin/indent
/usr/bin/install
/usr/bin/ipcrm
/usr/bin/ipcs
/usr/bin/iscsictl
/usr/bin/jobs Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/join
/usr/bin/jot
/usr/bin/kadmin
/usr/bin/kcc
/usr/bin/kdestroy
/usr/bin/kdump
/usr/bin/keylogin
/usr/bin/keylogout
/usr/bin/kf
/usr/bin/kgetcred
/usr/bin/killall
/usr/bin/kinit
/usr/bin/klist
/usr/bin/kpasswd
/usr/bin/krb5-config
/usr/bin/ksu
/usr/bin/kswitch
/usr/bin/ktrace
/usr/bin/ktrdump
/usr/bin/lam
/usr/bin/last
/usr/bin/lastcomm
/usr/bin/leave
/usr/bin/less
/usr/bin/lessecho
/usr/bin/lesskey
/usr/bin/lesspipe.sh
/usr/bin/lex
/usr/bin/lex++
/usr/bin/limits
/usr/bin/locale
/usr/bin/localedef
/usr/bin/locate
/usr/bin/lock
/usr/bin/lockf
/usr/bin/logger
/usr/bin/login Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/logins
/usr/bin/logname
/usr/bin/look
/usr/bin/lorder
/usr/bin/lp
/usr/bin/lpq
/usr/bin/lpr
/usr/bin/lprm
/usr/bin/lsvfs
/usr/bin/lzcat
/usr/bin/lzdec
/usr/bin/lzegrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [10]
/usr/bin/lzfgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [11]
/usr/bin/lzgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [12]
/usr/bin/lzless
/usr/bin/lzma
/usr/bin/lzmainfo
/usr/bin/m4
/usr/bin/mail
/usr/bin/Mail
/usr/bin/mailq
/usr/bin/mailx
/usr/bin/make
/usr/bin/make-roken
/usr/bin/makewhatis
/usr/bin/man
/usr/bin/mandoc
/usr/bin/manpath
/usr/bin/mckey
/usr/bin/mesg
/usr/bin/minigzip
/usr/bin/ministat
/usr/bin/mkcsmapper
/usr/bin/mkdep
/usr/bin/mkesdb
/usr/bin/mkfifo
/usr/bin/mkimg
/usr/bin/mklocale
/usr/bin/mkstr
/usr/bin/mktemp
/usr/bin/mkuzip
/usr/bin/more
/usr/bin/morse
/usr/bin/msgs
/usr/bin/mt
/usr/bin/nawk
/usr/bin/nc
/usr/bin/ncal cal, ncal -- displays a calendar and the date of Easter
/usr/bin/netstat
/usr/bin/newaliases
/usr/bin/newgrp
/usr/bin/newkey
/usr/bin/nex
/usr/bin/nfsstat
/usr/bin/nice Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/nl
/usr/bin/nm
/usr/bin/nohup Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/ntpq
/usr/bin/number
/usr/bin/nvi
/usr/bin/nview
/usr/bin/objcopy
/usr/bin/objdump
/usr/bin/od
/usr/bin/openssl
/usr/bin/opieinfo
/usr/bin/opiekey
/usr/bin/opiepasswd
/usr/bin/otp-md4
/usr/bin/otp-md5
/usr/bin/otp-sha1
/usr/bin/pagesize
/usr/bin/passwd
/usr/bin/paste
/usr/bin/patch
/usr/bin/pathchk
/usr/bin/pawd
/usr/bin/perror
/usr/bin/pftp
/usr/bin/pgrep
/usr/bin/pkill
/usr/bin/pmcstudy
/usr/bin/pom
/usr/bin/posixshmcontrol
/usr/bin/pr
/usr/bin/primes
/usr/bin/printenv Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/printf Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/proccontrol
/usr/bin/procstat
/usr/bin/protect
/usr/bin/quota
/usr/bin/random
/usr/bin/ranlib
/usr/bin/rctl
/usr/bin/read Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/readelf
/usr/bin/readlink
/usr/bin/ree
/usr/bin/renice
/usr/bin/reset
/usr/bin/resizewin
/usr/bin/rev
/usr/bin/revoke
/usr/bin/rfcomm_sppd The rfcomm_sppd utility is a Serial Port Profile daemon. It can operate in two modes: client and server.
/usr/bin/rgrep rgrep - a recursive, highlighting grep program
/usr/bin/rot13 The caesar utility attempts to decrypt caesar ciphers using English letter frequency statistics. Caesar reads from the standard input and writes to the standard output.

The optional numerical argument rotation may be used to specify a specific rotation value. If invoked as rot13, a rotation value of 13 will be used.

/usr/bin/rpcgen
/usr/bin/rpcinfo
/usr/bin/rping
/usr/bin/rs
/usr/bin/rup
/usr/bin/ruptime
/usr/bin/rusers
/usr/bin/rwall
/usr/bin/rwho
/usr/bin/scp
/usr/bin/script
/usr/bin/sdiff
/usr/bin/sed
/usr/bin/seq
/usr/bin/sftp
/usr/bin/shar
/usr/bin/showmount
/usr/bin/size
/usr/bin/slc
/usr/bin/slick-greeter-check-hidpi
/usr/bin/slick-greeter-set-keyboard-layout
/usr/bin/slogin
/usr/bin/smbutil
/usr/bin/sockstat
/usr/bin/soelim
/usr/bin/sort
/usr/bin/split
/usr/bin/sscop
/usr/bin/ssh
/usr/bin/ssh-add
/usr/bin/ssh-agent
/usr/bin/ssh-copy-id
/usr/bin/ssh-keygen
/usr/bin/ssh-keyscan
/usr/bin/stat
/usr/bin/stdbuf
/usr/bin/strfile
/usr/bin/string2key
/usr/bin/strings
/usr/bin/strip
/usr/bin/su
/usr/bin/sum The [ttps://www.freebsd.org/cgi/man.cgi?query=cksum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sum] utility is identical to the cksum utility, except that it de faults to using historic algorithm 1, as described below. It is provided for compatibility only.
/usr/bin/svnlite
/usr/bin/svnliteadmin
/usr/bin/svnlitebench
/usr/bin/svnlitedumpfilter
/usr/bin/svnlitefsfs
/usr/bin/svnlitelook
/usr/bin/svnlitemucc
/usr/bin/svnliterdump
/usr/bin/svnliteserve
/usr/bin/svnlitesync
/usr/bin/svnliteversion
/usr/bin/systat
/usr/bin/tabs
/usr/bin/tail
/usr/bin/talk
/usr/bin/tar
/usr/bin/tcopy
/usr/bin/tee
/usr/bin/telnet
/usr/bin/tftp
/usr/bin/time
/usr/bin/timeout
/usr/bin/tip
/usr/bin/top
/usr/bin/touch
/usr/bin/tput tput, clear -- terminal capability interface
/usr/bin/tr
/usr/bin/true
/usr/bin/truncate
/usr/bin/truss
/usr/bin/tset
/usr/bin/tsort
/usr/bin/tty
/usr/bin/type
/usr/bin/ucmatose
/usr/bin/udaddy
/usr/bin/ul
/usr/bin/ulimit
/usr/bin/umask
/usr/bin/unalias Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/uname
/usr/bin/uncompress compress, uncompress -- compress and expand data
/usr/bin/unexpand expand, unexpand -- expand tabs to spaces, and vice versa
/usr/bin/unifdef
/usr/bin/unifdefall
/usr/bin/uniq
/usr/bin/units
/usr/bin/unlzma
/usr/bin/unstr
/usr/bin/unvis
/usr/bin/unxz
/usr/bin/unzip
/usr/bin/unzstd
/usr/bin/uptime
/usr/bin/usbhidaction
/usr/bin/usbhidctl
/usr/bin/users
/usr/bin/uudecode [13] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag

specified. The b64decode utility is synonymous with uudecode with the -m flag specified.

/usr/bin/uuencode [14] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag

specified. The b64decode utility is synonymous with uudecode with the -m flag specified.

/usr/bin/vacation
/usr/bin/verify_krb5_conf
/usr/bin/vi
/usr/bin/view
/usr/bin/vis
/usr/bin/vmstat
/usr/bin/vtfontcvt
/usr/bin/w
/usr/bin/wait Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/wall
/usr/bin/wc
/usr/bin/what
/usr/bin/whatis
/usr/bin/whereis
/usr/bin/which Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/who
/usr/bin/whoami
/usr/bin/whois
/usr/bin/write
/usr/bin/x-terminal-emulator
/usr/bin/xargs
/usr/bin/xo
/usr/bin/xstr
/usr/bin/xz
/usr/bin/xzcat
/usr/bin/xzdec
/usr/bin/xzdiff
/usr/bin/xzegrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [15]
/usr/bin/xzfgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [16]
/usr/bin/xzgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [17]
/usr/bin/xzless
/usr/bin/yacc Yacc reads the grammar specification in the file filename and generates an LALR(1) parser for it.
/usr/bin/yes yes -- be repetitively affirmative
/usr/bin/ypcat ypcat -- print the values of all keys in a NIS database
/usr/bin/ypchfn chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [18]
/usr/bin/ypchpass chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [19]
/usr/bin/ypchsh chpass, chfn, chsh, ypchpass, ypchfn, ypchsh -- add or change user database information [20]
/usr/bin/ypmatch
/usr/bin/yppasswd
/usr/bin/ypwhich
/usr/bin/zcat
/usr/bin/zcmp
/usr/bin/zdiff
/usr/bin/zegrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [21]
/usr/bin/zfgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [22]
/usr/bin/zforce
/usr/bin/zgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [23]
/usr/bin/zinject
/usr/bin/zless
/usr/bin/zmore
/usr/bin/znew
/usr/bin/zstd
/usr/bin/zstdcat
/usr/bin/zstdegrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [24]
/usr/bin/zstdgrep zgrep, zegrep, zfgrep, bzgrep, bzegrep, bzfgrep, lzgrep, lzegrep, lzfgrep, xzgrep, xzegrep, xzfgrep, zstdgrep, zstdegrep, zstdfgrep -- grep compressed files [25]
/usr/bin/zstdless
/usr/bin/zstdmt
/usr/bin/zstreamdump
/usr/bin/ztest
Back to Icon Disti GhostBSD.pngusr Directory