Editing /usr/local/bin/

{{welcome}}

{{Navbar System Administation Utilities}}

==Introduction==

Here you will find a lot of small applications. Most of them already installed with GhostBSD.

This directory contains more or less 2500 utilities, applications, tools. If you install an application and don't find it as a starter on your taskbar, it is most likely you will find the application in this directory. You can start this application via cli or set a link to your desktop.

Not all applications come with man pages.

==Content==

Extraction of ''/usr/local/bin/'':

===Content 0 - A===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|7z||A [https://www.freebsd.org/cgi/man.cgi?query=7z&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html file archiver] with highest compression ratio
|-
|a52dec||[https://www.freebsd.org/cgi/man.cgi?query=a52dec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html a52dec] -	decode ATSC A/52 audio streams
|-
|aafire||[https://www.freebsd.org/cgi/man.cgi?query=aafire&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  aafire], aainfo, aasavefont, aatest - aalib example programs
|-
|aainfo||[https://www.freebsd.org/cgi/man.cgi?query=aafire&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aafire, aainfo], aasavefont, aatest - aalib example programs
|-
|aalib-config||[https://www.freshports.org/graphics/aalib/ aalib] ASCII art library; AA-lib is a low-level graphics library similar to many other libraries except for the fact that AA-lib does not require a graphics device!  In
fact, no "graphical" output is possible.  AA-lib uses a modern, high-techascii-art renderer in place of outmoded and cumbersome graphical output. WWW: http://aa-project.sourceforge.net/aalib/
|-
|aasavefont||[https://www.freebsd.org/cgi/man.cgi?query=aafire&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aafire, aainfo, aasavefont], aatest - aalib example programs
|-
|acyclic||[https://www.freebsd.org/cgi/man.cgi?query=acyclic&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html acyclic]	is a filter that takes a directed graph	as input and outputs a copy of the graph with sufficient edges	reversed  to  make  the	 graph       acyclic.	
|-
|addftinfo||[https://www.freebsd.org/cgi/man.cgi?query=addftinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html addftinfo]  reads	a troff	font file and adds some	additional font-metric   information that	is used	by the groff system. 
|-
|addr2line||[https://www.freebsd.org/cgi/man.cgi?query=addr2line&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html addr2line] -- translate program addresses to source	file names and line numbers

|-
|afmtodit||[https://www.freebsd.org/cgi/man.cgi?query=afmtodit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html afmtodit] - create font files for	use with groff -Tps

|-
|afuse||[https://www.freebsd.org/cgi/man.cgi?query=afuse&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html AFUSE] - automounting file system	implemented in user-space using	FUSE
|-
|ag-backup||[https://www.freebsd.org/cgi/man.cgi?query=ag&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ag] - The	Silver Searcher. Like ack, but faster.
|-
|ag-tool||[https://www.freebsd.org/cgi/man.cgi?query=ag&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ag] - The	Silver Searcher. Like ack, but faster.
|-
|agentxtrap||[https://www.freebsd.org/cgi/man.cgi?query=agentxtrap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html agentxtrap] - send an AgentX NotifyPDU to	an AgentX master agent

|-
|agrep||[https://www.freebsd.org/cgi/man.cgi?query=agrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html agrep] - search a	file for a string or regular expression, with approximate matching capabilities
|-
|al||[https://www.freebsd.org/cgi/man.cgi?query=al&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html al, al2] - Mono Assembly Linker
|-
|al2||[https://www.freebsd.org/cgi/man.cgi?query=al&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html al, al2] - Mono Assembly Linker
|-
|analyze||The [https://www.freebsd.org/cgi/man.cgi?query=analyze&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html analyze] command displays the	rotation and fallback angles, surface     area, and plane equation	for each face of the ARB specified on the     command line.
|-
|appletviewer||[https://www.freebsd.org/cgi/man.cgi?query=appletviewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html appletviewer] - Runs applets outside of a	web browser.
|-
|ar||[https://www.freebsd.org/cgi/man.cgi?query=ar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ar, ranlib] -- manage archives
|-
|array||[https://www.freebsd.org/cgi/man.cgi?query=array&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Arrays] can have fixed size, or can grow      automatically as	needed.	A default value	is used	for entries that  have       not been	explicitly set.
|-
|as||[https://www.freebsd.org/cgi/man.cgi?query=as&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html AS] - the	portable GNU assembler.
|-
|aspell||[https://www.freebsd.org/cgi/man.cgi?query=aspell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aspell] is a utility program that	connects to the	Aspell library so that   it can function as an ispell -a replacement, as	an  independent	 spell      checker,	 as a test utility to test out Aspell library features,	and as       a utility for managing dictionaries used	by the library.
|-
|aspell-import||[https://www.freebsd.org/cgi/man.cgi?query=aspell-import&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aspell-import] is	a command that will search for old personal dictionaries and will import them	into GNU Aspell. It will look for both	Ispell     and Aspell dictionaries.	To use it just run it from the command prompt.
|-
|atril||[https://www.freebsd.org/cgi/man.cgi?query=atril&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Atril] - The MATE	Document Viewer

|-
|aucat||[https://www.freebsd.org/cgi/man.cgi?query=aucat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aucat] -- audio files manipulation tool

|-
|audio2tape||[https://www.freebsd.org/cgi/man.cgi?query=audio2tape&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html audio2tape] -- Sinclair ZX Spectrum audio	to tape	file co
|-
|autopoint||[https://www.freebsd.org/cgi/man.cgi?query=autopoint&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html autopoint] - copies standard gettext infrastructure

|}

===Content B===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|baobab||Baobab is a disk space analyzer for GNOME
|-
|bash||[https://www.freebsd.org/cgi/man.cgi?query=bash&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Bash]  is	 an  sh-compatible  command language interpreter that executes       commands	read from the standard input or	from a file.  Bash also	incorporates useful features from the	Korn and C shells (ksh and csh).
|-
|bashbug||[https://www.freebsd.org/cgi/man.cgi?query=bashbug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bashbug] - report	a bug in bash
|-
|bcomps||[https://www.freebsd.org/cgi/man.cgi?query=bcomps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bcomps]  decomposes  graphs  into	their biconnected components, printing     the components to standard output.

|-
|bounce||The [https://www.freebsd.org/cgi/man.cgi?query=bounce&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bounce(8)] daemon maintains per-message log files with delivery status information.	
|-
|brasero||[https://www.freebsd.org/cgi/man.cgi?query=brasero&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Brasero] is a disc burning application. It is designed to	be simple  and   easy to use.  It	allows to create data CD/DVD, audio CD,	to copy	CD/DVD    and to burn images. It has some nices features, such as a  song,	 image      and  video  previewer.  It can also search for files (thanks to beagle)     and display a playlist and its contents.
|-
|bsdcat||[https://www.freebsd.org/cgi/man.cgi?query=bsdcat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bsdcat] typically takes a filename as an argument or reads standard	input  when used in a pipe. In both cases	decompressed data it written to	standard output.

|-
|bsdcpio||[https://www.freebsd.org/cgi/man.cgi?query=bsdcpio&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cpio] copies files between archives	and directories.  This implementation      can extract from tar, pax,	cpio, zip, jar,	ar, and	ISO 9660 cdrom images     and can create tar, pax, cpio, ar,	and shar archives.
|-
|bsdtar||[https://www.freebsd.org/cgi/man.cgi?query=bsdtar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tar] creates and manipulates streaming archive files.  This	implementation   can extract from tar, pax,	cpio, zip, jar,	ar, xar, rpm, 7-zip, and ISO9660 cdrom	images and can create tar, pax,	cpio, ar, zip, 7-zip, and shar     archives.
|-
|btcflash||[https://www.freebsd.org/cgi/man.cgi?query=btcflash&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Btcflash] is used	to read	update the Firmware for	a BTC DRW1008 DVD+/-RW        recorder.
|-
|bzz||[https://www.freebsd.org/cgi/man.cgi?query=bzz&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bzz] - DjVu general purpose compression utility.
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content C===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|c44||[https://www.freebsd.org/cgi/man.cgi?query=c44&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html C44] produces	a DjVuPhoto encoded image.  The	input image file inputfilename       can be either a portable	gray-map (PGM) or a  portable  pix-map	PPM).
Input images compressed with JPEG are also accepted. It is however suggested to only use high quality	JPEG  files  (low  compression	ratio,  large  size)  because the wavelet compression will increase the defects       already present in highly compressed JPEG files.
|-
|c++9||[https://en.wikipedia.org/wiki/C%2B%2B C++]  is a general-purpose programming language created by Bjarne Stroustrup as an extension of the C programming language, or "C with Classes". 
|-
|cairo-sphinx||[https://www.freshports.org/graphics/cairo/ Cairo] is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System and in-memory image buffers. PostScript and PDF file output is planned. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).
|-
|cairo-trace||[https://www.freshports.org/graphics/cairo/ Cairo] is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System and in-memory image buffers. PostScript and PDF file output is planned. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).
|-
|caja||[https://www.freebsd.org/cgi/man.cgi?query=caja&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Caja] - The MATE File Manager
|-
|caja-autorun-software||[https://www.freebsd.org/cgi/man.cgi?query=caja-autorun-software&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html caja-autorun-software] - Autorun Software	in Caja
|-
|caja-connect-server||[https://www.freebsd.org/cgi/man.cgi?query=caja-connect-server&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Caja Connect Server] is the connection manager for Caja/MATE. It is provided as	a part of the Caja package for the MATE	Desktop	Environment.
Simply running "caja-connection-server" will open a simple  dialog  allowing  you  to select the server type, and specify the server address, port, and login credentials for the server you want to connect to. This  is  the	same  dialog accessible	via the	Caja "File" menu, and the MATE       Desktop "Places"	menu.
|-
|caja-file-management-properties||[https://www.freebsd.org/cgi/man.cgi?query=caja-file-management-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Caja  File  Management  Properties] is distributed as a part of the caja package and is used to configure	Caja's preferences.  It	 is  typically  accessible  through  the	 "Edit"	 menu  in  Caja	browser	windows, or by       pressing	"ALT+E"	and then "N" once the menu opens.
File Management Preferences allows the user to configure	the  way  caja       behaves.
|-
|caja-sendto||[https://www.freebsd.org/cgi/man.cgi?query=caja-sendto&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html caja-sendto]  -  convenience application to send a file via email	or instant messenger
|-
|canberra-gtk-play||[http://manpages.ubuntu.com/manpages/bionic/man1/canberra-gtk-play.1.html canberra-gtk-play]  plays  sound  events that are specified by the XDG Sound Theme and Name       Specification.
|-
|cancel||
|-
|caspol||[https://helpmanual.io/help/caspol/ Command line tool to modify Code Access Security policies].
|-
|cb2ti3||[https://www.argyllcms.com/doc/cb2ti3.html cb2ti3] Convert Colorblind format CMY/RGB test chart information into Argyll .ti3 CGATS profile forma files. This allows the use of raw Colorblind profiling data, to be used for Argyll profile creation or validation..
|-
|cbc||[https://www.freebsd.org/cgi/man.cgi?query=cbc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cbc] - Couchbase Client Commandline Utility
|-
|cccheck||[https://www.freebsd.org/cgi/man.cgi?query=cccheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cccheck]-  Perform  static  code contracts verification	for CLR	assemblies.
|-
|ccomps||[https://www.freebsd.org/cgi/man.cgi?query=ccomps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ccomps] -	connected components filter for	graphs
|-
|ccrewrite||[https://www.freebsd.org/cgi/man.cgi?query=ccrewrite&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ccrewrite]  - Rewrite CLR	assemblies for runtime code contract verification.
|-
|cctiff||[https://www.argyllcms.com/doc/cctiff.html cctiff] Color convert a TIFF or JPEG file using a sequence of compatible ICC device profiles, abstract profiles, device link profiles and calibration files. The sequence may be zero length, facilitating format conversion and ICC profile embedding without otherwise altering the pixel values.
|-
|ccxxmake||[https://www.argyllcms.com/doc/ccxxmake.html ccxxmake] For Colorimeters that rely on a calibration matrix, ccxxmake allows creation of a correction matrix file (ccmx) for a particular Colorimeter & Display combination, by making use a reference Spectrometer or Colorimeter instrument. This can then be used to improve the accuracy of subsequent measurements with that Colorimeter on that Display by using it with the dispcal, dispread and spotread -X option. A ccmx file can also be installed, and will then appear in the available display type selection (-y option). See Wide Gamut Displays and Colorimeters for more information on why this may be useful. [ Note that to make use of a colorimeter as a CCMX reference, you will have to provide two .ti3 files rather than using interactive measurement- see -f. ]
|-
|cd-convert||[https://www.freebsd.org/cgi/man.cgi?query=cd-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-it8] -	Color Manager Testing Tool
|-
|cd-create-profile||[http://manpages.ubuntu.com/manpages/bionic/man1/cd-create-profile.1.html cd-create-profile] - Color Manager Profile Creation Tool
|-
|cd-drive||[https://www.freebsd.org/cgi/man.cgi?query=cd-drive&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-drive] - show CD-ROM drive characteristics
|-
|cd-fix-profile||[http://manpages.ubuntu.com/manpages/bionic/man1/cd-fix-profile.1.html cd-fix-profile] - Color Manager Testing Tool
|-
|cd-iccdump||
|-
|cd-info||[https://www.freebsd.org/cgi/man.cgi?query=cd-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-info] - shows Information about a CD or CD-image
|-
|cd-it8||[https://www.freebsd.org/cgi/man.cgi?query=cd-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-it8] -	Color Manager Testing Tool
|-
|cd-paranoia||[https://www.freebsd.org/cgi/man.cgi?query=cd-paranoia&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-paranoia]  9.8	(Paranoia release III via libcdio) - an	audio CD reading utility which includes extra	data verification features
|-
|cd-read||[https://www.freebsd.org/cgi/man.cgi?query=cd-read&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-read] - reads Information from	a CD or	CD-image
|-
|cdda2wav||[https://www.freebsd.org/cgi/man.cgi?query=cdda2wav&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cdda2wav] - dumps	CD audio data into sound files with extra data verification
|-
|cdda-player||[https://manpages.debian.org/testing/libcdio-utils/cdda-player.1.en.html cdda-player]: - simple curses CD player
|-
|cddb_query||[http://libcddb.sourceforge.net/tutorial.html cddb_query] This function will recalculate the disc ID of the disc provided to it and then query the local cache or the remote server for the requested information. The first disc in the query can now be processed (3). We decrement the match counter and if it has not yet reached zero, we retrieve the next match with cddb_query_next (4).  
|-
|cdparanoia||[https://www.freebsd.org/cgi/man.cgi?query=cdparanoia&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cdparanoia]  (Paranoia  release III) - an	audio CD reading utility which includes	extra data verification	features

|-
|cdr2raw||
|-
|cdr2text||
|-
|cdr2xhtml||
|-
|cdrdao||[https://www.freebsd.org/cgi/man.cgi?query=cdrdao&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cdrdao] -	reads and writes CDs in	disc-at-once mode
|-
|cdrecord||[https://www.freebsd.org/cgi/man.cgi?query=cdrecord&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Cdrecord] is used	to record data or audio	Compact	 Discs	on  an	Orange     Book CD-recorder, to write DVD media on a DVD-recorder or to write BluRay media on a BluRay-recorder.
|-
|cert2spc||[https://www.freebsd.org/cgi/man.cgi?query=cert2spc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cert2spc]	 -  Transform  multiple	 X.509 certificates to a Software Publisher Certificate

|-
|cert-sync||[https://www.freebsd.org/cgi/man.cgi?query=cert-sync&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cert-sync] - Mono	Certificate Store Sync Tool
|-
|certmgr||[https://www.freebsd.org/cgi/man.cgi?query=certmgr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html certmgr] - Mono Certificate Manager (CLI version)

|-
|certtool||[https://www.freebsd.org/cgi/man.cgi?query=certtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html certtool] - GnuTLS certificate tool
|-
|certutil||
|-
|chardetect-3.7||
|-
|chartread||
|-
|chattr||[https://www.freebsd.org/cgi/man.cgi?query=chattr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chattr] -	change file attributes on a Linux file system
|-
|checkmk||[https://www.freebsd.org/cgi/man.cgi?query=checkmk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html checkmk] -  Awk	script	for  generating	 C unit	tests for use with the    Check unit testing framework.
|-
|checkXML5||[https://www.freebsd.org/cgi/man.cgi?query=checkXML5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html checkXML5] - An XML lint tool for	KDE DocBook XML	documents.
|-
|cheese||[https://www.freebsd.org/cgi/man.cgi?query=cheese&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cheese] -	tool to	take pictures and videos from your webcam
|-
|cheetah||
|-
|cheetah-analyze||
|-
|cheetah-compile||
|-
|chem||[https://www.freebsd.org/cgi/man.cgi?query=chem&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chem] - groff preprocessor for producing chemical	structure diagrams
|-
|cherryd-2.7||
|-
|cherrytree||
|-
|chktrust||[https://www.freebsd.org/cgi/man.cgi?query=chktrust&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chktrust]	- Check	the trust of a PE executable.
|-
|chm_http||
|-
|chmorph||
|-
|chrome||[https://www.freebsd.org/cgi/man.cgi?query=chrome&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chromium-browser] - the web browser from Google

|-
|chromedriver||
|-
|cifsdd||[https://www.freebsd.org/cgi/man.cgi?query=cifsdd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cifsdd] -	convert	and copy a file	over SMB, This tool is part of the	[https://www.freebsd.org/cgi/man.cgi?query=samba&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports samba(7)] suite.
|-
|cinnamon-desktop-migrate-mediakeys||
|-
|cjb2||[https://www.freebsd.org/cgi/man.cgi?query=cjb2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cjb2] - Simple DjVuBitonal encoder.
|-
|cjpeg||[https://www.freebsd.org/cgi/man.cgi?query=cjpeg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cjpeg] - compress	an image file to a JPEG	file
|-
|cjs-console||
|-
|ck-history||
|-
|ck-launch-session||
|-
|ck-list-sessions||
|-
|clang80||[https://www.unix.com/man-page/freebsd/1/clang/ clang] is a C, C++, and Objective-C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
     Depending on which high-level mode setting is passed, Clang will stop before doing a full link.  While Clang is highly integrated, it is
     important to understand the stages of compilation, to understand how to invoke it.
|-
|classpath||
|-
|clear-color||
|-
|clear-fbo||
|-
|clear-fbo-scissor||
|-
|clear-fbo-tex||
|-
|clear-random||
|-
|clear-repeat||
|-
|clear-scissor||
|-
|clear-undefined||
|-
|clearspd||
|-
|clp||
|-
|cluster||[https://www.freebsd.org/cgi/man.cgi?query=cluster&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cluster]	- find clusters	in a graph and augment the graph with this information.
|-
|cmis-client||
|-
|cmsutil||
|-
|cmx2raw||
|-
|cmx2text||
|-
|cmx2xhtml||
|-
|collink||
|-
|colormgr||
|-
|colprof||
|-
|colverify||
|-
|com.github.danrabbit.lookbook||
|-
|contractor||
|-
|convolutions||
|-
|copypix||
|-
|copytex||
|-
|corelist||[https://www.freebsd.org/cgi/man.cgi?query=corelist&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html corelist] - a commandline	frontend to Module::CoreList
|-
|corpus2array||
|-
|corrupt_mpeg2||
|-
|cpaldjvu||[https://www.freebsd.org/cgi/man.cgi?query=cpaldjvu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cpaldjvu] - DjVuDocument encoder for low-color images.
|-
|cpan||[https://www.freebsd.org/cgi/man.cgi?query=cpan&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html This script] provides a command interface	(not a shell) to CPAN. At the        moment it uses CPAN.pm to do the	work, but it is	not a one-shot command       runner for CPAN.pm.

|-
|cpp9||
|-
|createfpx||
|-
|createhdf||
|-
|createwin||
|-
|crlupdate||[https://www.freebsd.org/cgi/man.cgi?query=crlupdate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html crlupdate] - Mono	Certficate Revocation List Downloader and Updater
This tool allows	the download of	new, or	update of existing, Certficate       Revocation List (CRL) associated	with the certificates present  in  the       user  (default)	or  machine  stores. The CRL present in	the stores are       used to determine the validity of  unexpired,  trusted  X.509  certificates.	To ensure CRL are always fresh consider	automating the updates       using the at (or	similar) command(s).
|-
|crlutil||
|-
|croco-0.6-config||
|-
|csc||[https://www.freebsd.org/cgi/man.cgi?query=csc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html csc] - driver program for	the CHICKEN Scheme compiler

|-
|cscope||[https://www.freebsd.org/cgi/man.cgi?query=cscope&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cscope] -	interactively examine a	C program
|-
|csepdjvu||[https://www.freebsd.org/cgi/man.cgi?query=csepdjvu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html csepdjvu] - DjVu encoder for separated data files.

|-
|csharp||[https://www.freebsd.org/cgi/man.cgi?query=csharp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html csharp, gsharp] -	Interactive C# Shell
|-
|csi||The [https://www.freebsd.org/cgi/man.cgi?query=csi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CHICKEN Scheme interpreter]
|-
|csslint-0.6||
|-
|cubemap||
|-
|cuberender||
|-
|cue2toc||[https://www.freebsd.org/cgi/man.cgi?query=cue2toc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Cue2toc] converts  cuefile from CUE to TOC format and writes the	result  to tocfile.  If either cuefile or tocfile is omitted or a  single  dash       "-"  cue2toc reads from standard	input and writes to standard ouput respectively.
|-
|cups-calibrate||[https://www.freebsd.org/cgi/man.cgi?query=cups-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-calibrate] -	ESP CUPS Printer Calibration Tool This program allows you to calibrate the	color output of	printers using   the Gutenprint CUPS driver. Please note that this  program  only	 works       with the	Gutenprint CUPS	driver.
|-
|cups-config||[https://www.freebsd.org/cgi/man.cgi?query=cups-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-config] - get cups api, compiler, directory,	and link information.
|-
|cupstestdsc||[https://www.freebsd.org/cgi/man.cgi?query=cupstestdsc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupstestdsc]  tests  the	conformance  of	 PostScript files to the Adobe PostScript Language Document Structuring	Conventions Specification version  3.0.  The results of testing and any other	output are sent	to the       standard	output.	 The second form of the	command	reads PostScript  from      the standard input.
|-
|cupstestppd||[https://www.freebsd.org/cgi/man.cgi?query=cupstestppd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupstestppd] tests the conformance of PPD	files to the Adobe  PostScript Printer Description file	format specification version 4.3.  It can also     be used to list the supported options and  available  fonts  in	a  PPD      file.   The  results  of	 testing  and any other	output are sent	to the       standard	output.
|-
|curl||[https://www.freebsd.org/cgi/man.cgi?query=curl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html curl]  is	 a tool	to transfer data from or to a server, using one	of the   supported protocols (DICT, FILE,	FTP, FTPS, GOPHER, HTTP, HTTPS,	 IMAP,      IMAPS,  LDAP,  LDAPS,  POP3,  POP3S,  RTMP, RTSP, SCP, SFTP, SMB, SMBS,       SMTP, SMTPS, TELNET and TFTP). The command is designed to work  without       user interaction.
|-
|curl-config||[https://www.freebsd.org/cgi/man.cgi?query=curl-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html curl-config] - Get information about a libcurl installation
|-
|cvlc||
|-
|cvsps||[https://www.freebsd.org/cgi/man.cgi?query=cvsps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CVSps] - create patchset information from	CVS

|-
|cvt||[https://www.freebsd.org/cgi/man.cgi?query=cvt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cvt] - calculate VESA CVT	mode lines
|-
|cvtsudoers||
|-
|cwebp||[https://www.freebsd.org/cgi/man.cgi?query=cwebp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cwebp] - compress	an image file to a WebP	file
|-
|cxpm||[https://www.freebsd.org/cgi/man.cgi?query=cxpm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cxpm] - Check an XPM (X PixMap) file, versions XPM 1, 2, or 3.
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content D===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|dav1d||
|-
|dazzle-list-counters||
|-
|dbus-binding-tool||[https://www.freebsd.org/cgi/man.cgi?query=dbus-binding-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-binding-tool] - C language GLib bindings generation utility.
|-
|dbus-cleanup-sockets||[https://www.freebsd.org/cgi/man.cgi?query=dbus-cleanup-sockets&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-cleanup-sockets] - clean up leftover	sockets	in a directory
|-
|dbus-daemon||[https://www.freebsd.org/cgi/man.cgi?query=dbus-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-daemon] - Message bus daemon
|-
|dbus-launch||[https://www.freebsd.org/cgi/man.cgi?query=dbus-launch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-launch] - Utility to	start a	message	bus from a shell script
|-
|dbus-monitor||[https://www.freebsd.org/cgi/man.cgi?query=dbus-monitor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-monitor] - debug probe to print message bus messages

|-
|dbus-run-session||[https://www.freebsd.org/cgi/man.cgi?query=dbus-run-session&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-run-session]	- start	a process as a new D-Bus session
|-
|dbus-send||[https://www.freebsd.org/cgi/man.cgi?query=dbus-send&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-send] - Send	a message to a message bus
|-
|dbus-test-tool||[https://www.freebsd.org/cgi/man.cgi?query=dbus-test-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-test-tool] -	D-Bus traffic generator	and test tool

|-
|dbus-update-activation-environment||[https://www.freebsd.org/cgi/man.cgi?query=dbus-update-activation-environment&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-update-activation-environment] - update environment used for	D-Bus      session services

|-
|dbus-uuidgen||[https://www.freebsd.org/cgi/man.cgi?query=dbus-uuidgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-uuidgen] - Utility to generate UUIDs
|-
|dbwrap_tool||[https://www.freebsd.org/cgi/man.cgi?query=dbwrap_tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbwrap_tool] - low level TDB/CTDB	manipulation tool using	the dbwrap       interface. This tool is part of the	samba(7) suite.
|-
|dcadec||[https://www.freebsd.org/cgi/man.cgi?query=dcadec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dcadec] -	decode DTS Coherent Acoustics audio streams
|-
|dconf||[https://www.freebsd.org/cgi/man.cgi?query=dconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dconf] - Simple tool for manipulating a dconf database
|-
|dconf-editor||The  [https://www.freebsd.org/cgi/man.cgi?query=dconf-editor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dconf-editor]  program  provides  a graphical interface for editing       settings	that are stored	in the dconf database.
|-
|ddjvu||[https://www.freebsd.org/cgi/man.cgi?query=ddjvu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ddjvu] - Command line DjVu decoder.
|-
|derb||[https://www.freebsd.org/cgi/man.cgi?query=derb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html derb] reads the compiled resource	bundle files  passed  on  the  command  line and	write them back	in text	form.  The resulting text files	have a       .txt extension while compiled resource bundle  source  files  typically       have a .res extension.
|-
|derdump||[https://www.freebsd.org/cgi/man.cgi?query=derdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Derdump] dumps  a  DER structure	read from a file or, if	none is	specified, from standard input to standard output.  It is mainly intended as      a debugging tool.

|-
|deriv||
|-
|desktop-file-install||[https://www.freebsd.org/cgi/man.cgi?query=desktop-file-install&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  The desktop-file-install] program	is a tool to install,  and  optionally    edit,  desktop files. The desktop-file-edit program is a	tool to	edit a       desktop file. They are mostly useful for	developers and packagers.
|-
|desktop-file-validate||[https://www.freebsd.org/cgi/man.cgi?query=desktop-file-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html desktop-file-validate - Validate] desktop	entry files
|-
|desktoptojson||[https://www.freebsd.org/cgi/man.cgi?query=desktoptojson&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html desktoptojson] - Converts	a .desktop file	to a .json file.
|-
|devdump||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.

|-
|dht-example||
|-
|diagtool80||
|-
|diffimg||[https://www.freebsd.org/cgi/man.cgi?query=diffimg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html diffimg] - Calculates intersection between two images
|-
|dijkstra||[https://www.freebsd.org/cgi/man.cgi?query=dijkstra&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dijkstra]	- single-source	distance filter
|-
|ding||[https://www.freebsd.org/cgi/man.cgi?query=ding&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ding] is a dictionary lookup program for X Windows/Unix. It comes	with a       German-English dictionary with about 345,000 entries.
|-
|dinoshade||
|-
|dirmngr||[https://www.freebsd.org/cgi/man.cgi?query=dirmngr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Dirmngr] is a server for managing	and downloading	certificate revocation
lists (CRLs) for	X.509 certificates and for  downloading	 the  certificates  themselves. Dirmngr also handles OCSP requests as	an alternative       to CRLs.	Dirmngr	is either invoked internally by	gpgsm (from  GnuPG  2)
or when running as a system daemon through the dirmngr-client tool.
|-
|dirmngr-client||[https://www.freebsd.org/cgi/man.cgi?query=dirmngr-client&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dirmngr-client] -	Tool to	access the Dirmngr services

|-
|disco||[https://www.freebsd.org/cgi/man.cgi?query=disco&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html disco]  is  a  tool  for discovering web services	and for	retireving the        documents that describe those services.
|-
|dispcal||
|-
|dispread||
|-
|dispwin||
|-
|dissolve||
|-
|djpeg||[https://www.freebsd.org/cgi/man.cgi?query=djpeg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djpeg]  decompresses  the	 named	JPEG file, or the standard input if no       file is named, and produces an image file on the	standard output.  PBM-PLUS  (PPM/PGM),	 BMP,  GIF, Targa, or RLE (Utah	Raster Toolkit)	output       format can be selected.	
|-
|djvm||[https://www.freebsd.org/cgi/man.cgi?query=djvm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvm] - Manipulate bundled multi-page DjVu documents.
|-
|djvmcvt||[https://www.freebsd.org/cgi/man.cgi?query=djvmcvt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvmcvt] - Convert multi-page DjVu documents.

|-
|djvudigital||[https://www.freebsd.org/cgi/man.cgi?query=djvudigital&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvudigital] - creates DjVu files	from PS	or PDF files.
|-
|djvudump||[https://www.freebsd.org/cgi/man.cgi?query=djvudump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvudump	]- Display internal structure of	DjVu files.
|-
|djvuextract||[https://www.freebsd.org/cgi/man.cgi?query=djvuextract&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvuextract] - Extract chunks from DjVu image files
|-
|djvumake||[https://www.freebsd.org/cgi/man.cgi?query=djvumake&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvumake] - Assemble DjVu	image files.

|-
|djvups||[https://www.freebsd.org/cgi/man.cgi?query=djvups&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvups] -	Convert	DjVu documents to PostScript.
|-
|djvused||[https://www.freebsd.org/cgi/man.cgi?query=djvused&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvused] - Multi-purpose DjVu document editor.
|-
|djvuserve||Program	[https://www.freebsd.org/cgi/man.cgi?query=djvuserve&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvuserve]  is  a  CGI  program	that can be executed by	a HTTP        server for serving DjVu documents.  This	program	is able	to  conver
|-
|djvutoxml||[https://www.freebsd.org/cgi/man.cgi?query=djvutoxml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvutoxml, djvuxmlparser] - DjVuLibre XML	Tools; The  DjVuLibre  XML  Tools provide for editing the metadata, hyperlinks and hidden text associated with	DjVu  files.   Unlike  djvused(1)  the       DjVuLibre  XML  Tools rely on the XML technology	and can	take advantage       of XML editors and verifiers.

|-
|djvutxt||[https://www.freebsd.org/cgi/man.cgi?query=djvutxt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvutxt] - Extract the hidden text from DjVu documents.
|-
|djvuxmlparser||[https://www.freebsd.org/cgi/man.cgi?query=djvutoxml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvutoxml, djvuxmlparser] - DjVuLibre XML	Tools; The  DjVuLibre  XML  Tools provide for editing the metadata, hyperlinks       and hidden text associated with	DjVu  files.   Unlike  djvused(1)  the       DjVuLibre  XML  Tools rely on the XML technology	and can	take advantage       of XML editors and verifiers.

|-
|dlist-begin-call-end||
|-
|dlist-dangling||
|-
|dlist-degenerate||
|-
|dlist-edgeflag||
|-
|dlist-edgeflag-dangling||
|-
|dlist-flat-tri||
|-
|dlist-mat-tri||
|-
|dlist-recursive-call||
|-
|dlist-tri-flat-tri||
|-
|dlist-tri-mat-tri||
|-
|dm-tool||[https://www.freebsd.org/cgi/man.cgi?query=dm-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dm-tool] - a tool	to control the display manager
|-
|dmcs||
|-
|doas||[https://www.freebsd.org/cgi/man.cgi?query=doas&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html doas] -- execute commands as another user
|-
|dot||[https://www.freebsd.org/cgi/man.cgi?query=dot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dot] - filter for	drawing	directed graphs
|-
|dot_builtins||
|-
|dotty||[https://www.freebsd.org/cgi/man.cgi?query=dotty&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dotty]  is  a  graph editor for the X Window System.  It may be run as a       standalone editor, or as	a front	end for	applications that use  graphs.    It can control multiple windows viewing different graphs.
|-
|dpkg||[https://www.freebsd.org/cgi/man.cgi?query=dpkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg]  is	 a  tool to install, build, remove and manage Debian packages.
|-
|dpkg-architecture||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-architecture&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-architecture] provides a facility to	determine and  set  the	 build     and host	architecture for package building.

The  build  architecture	 is  always  determined	by an external call to       dpkg(1),	and cannot be set at the command line.
|-
|dpkg-buildflags||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-buildflags&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-buildflags]	is  a tool to retrieve compilation flags to use	during        build of	Debian packages. 
|-
|dpkg-buildpackage||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-buildpackage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-buildpackage] - build binary	or source packages from	sources
|-
|dpkg-checkbuilddeps||This  [https://www.freebsd.org/cgi/man.cgi?query=dpkg-checkbuilddeps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html program]  checks  the installed packages in	the system against the        build dependencies and build conflicts listed in	the control  file.  If      any are not met,	it displays them and exits with	a nonzero return code.
|-
|dpkg-deb||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-deb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-deb] packs, unpacks and provides information	about Debian archives.
|-
|dpkg-distaddfile||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-distaddfile&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-distaddfile	]adds an	entry for a named file to debian/files.
|-
|dpkg-divert||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-divert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-divert]  is	the  utility  used  to	set  up	and update the list of      diversions.

|-
|dpkg-genbuildinfo||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-genbuildinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-genbuildinfo]  reads	 information from an unpacked and built	Debian    source tree and from the	files it has generated and generates a	Debian       control	file  describing the build environment and the build artifacts       (.buildinfo file).
|-
|dpkg-genchanges||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-genchanges&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-genchanges]	reads  information  from  an unpacked and built	Debian      source tree and from the	files it has generated and generates a	Debian     upload control file (.changes file).
|-
|dpkg-gencontrol||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-gencontrol&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-gencontrol]	reads  information from	an unpacked Debian source tree        and  generates  a  binary  package  control  file  (which  defaults  to     debian/tmp/DEBIAN/control);  during  this  process it will simplify the       relation	fields.
|-
|dpkg-gensymbols||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-gensymbols&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-gensymbols] scans a temporary build tree  (debian/tmp  by  default)      looking	for  libraries	and  generates a symbols file describing them.   This file, if non-empty,	is then	installed in the  DEBIAN  subdirectory       of  the	build  tree  so	 that  it  ends	 up  included  in  the control   information of the package.
|-
|dpkg-maintscript-helper||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-maintscript-helper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-maintscript-helper]	-  works  around  known	 dpkg  limitations  in  maintainer scripts
|-
|dpkg-mergechangelogs||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-mergechangelogs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-mergechangelogs] - 3-way merge of debian/changelog files
|-
|dpkg-name||This manual page	documents the [https://www.freebsd.org/cgi/man.cgi?query=dpkg-name&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-name] program	which provides an easy      way to rename Debian packages into their	full  package  names.  A  full     package	name  consists of package_version_architecture.package-type as       specified in the	control	file of	the package. The version part  of  the      filename	 consists  of  the  upstream  version  information  optionally      followed	by a hyphen and	the  revision  information.  The  package-type      part comes from that field if present or	fallbacks to deb.
|-
|dpkg-parsechangelog||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-parsechangelog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-parsechangelog]  reads  and	parses	the  changelog	of an unpacked     Debian source tree and outputs the information in it to standard	output    in a machine-readable form.

|-
|dpkg-query||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-query] - a tool to query the	dpkg database
|-
|dpkg-scanpackages||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-scanpackages&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-scanpackages] sorts through a tree of Debian	 binary	 packages  and     creates	a  Packages file, used by apt(8), dselect(1), etc, to tell the      user what packages are available	for installation. These	Packages files       are  the	 same  as those	found on Debian	archive	sites and CD-ROMs. You       might use dpkg-scanpackages yourself if making  a  directory  of	 local      packages	to install on a	cluster	of machines.
|-
|dpkg-scansources||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-scansources&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-scansources]	scans the given	binary-dir for .dsc files.  These  are       used to create a	Debian source index, which is output to	stdout.
|-
|dpkg-shlibdeps||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-shlibdeps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-shlibdeps] -	generate shared	library	substvar dependencies
|-
|dpkg-source||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-source&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-source] - Debian source package (.dsc) manipulation tool
|-
|dpkg-split||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-split&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-split]  splits  Debian  binary package files	into smaller parts and        reassembles them	again, to support the storage of large	package	 files     on small	media such as floppy disks.
|-
|dpkg-statoverride||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-statoverride&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-statoverride] - override ownership and mode of files
|-
|dpkg-trigger||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-trigger&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-trigger]  is	 a  tool to explicitly activate	triggers and check for       its support on the running dpkg.
|-
|dpkg-vendor||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-vendor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-vendor]  is	a  tool	 to  query information about vendors listed in      /usr/local/etc/dpkg/origins.	   /usr/local/etc/dpkg/origins/default       contains	information about the current vendor.
|-
|draw2arrays||
|-
|drawarrays||
|-
|drawelements||
|-
|drawelements-large||
|-
|drawoverhead||
|-
|drawpix||
|-
|drawrange||
|-
|dropbox||[https://www.freebsd.org/cgi/man.cgi?query=dropbox&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dropbox] - A command line	interface to the Dropbox service
|-
|dsbmc||
|-
|dsbmc-cli||[https://www.freebsd.org/cgi/man.cgi?query=dsbmc-cli&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dsbmc-cli] is a command-line client	for DSBMD that provides	a simple interface to	query information about	storage	devices, and to	send requests     to	mount, unmount and eject these.

|-
|dselect||[https://www.freebsd.org/cgi/man.cgi?query=dselect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dselect] is one of the primary user interfaces for managing packages on       a Debian	system.	At the dselect main  menu,  the	 system	 administrator       can:
* Update the list of available package versions,
* View the status of installed and available packages,
* Alter	package	selections and manage dependencies,
* Install new packages or upgrade to newer versions.
|-
|dsymutil80||
|-
|dtd2rng||
|-
|dtd2xsd||[https://www.freebsd.org/cgi/man.cgi?query=dtd2xsd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dtd2xsd] - XML Schema generator from XML document	that contains DTD.
|-
|dtsdec||
|-
|dumpmscat||
|-
|dumpsexp||
|-
|dvd-ram-control||
|-
|dvd+rw-booktype||
|-
|dvd+rw-format||
|-
|dvd+rw-mediainfo||
|-
|dvipdf||[https://www.freebsd.org/cgi/man.cgi?query=dvipdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dvipdf] -	Convert	TeX DVI	file to	PDF using ghostscript and dvips
|-
|dwebp||[https://www.freebsd.org/cgi/man.cgi?query=dwebp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dwebp] - decompress a WebP file to an image file
|-
|dwp
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content E===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|easy_install-2.7||
|-
|easy_install-3.6||
|-
|easy_install-3.7||
|-
|ebook2html||
|-
|ebook2raw||
|-
|ebook2text||
|-
|echo-client-2||
|-
|edgepaint||[https://www.freebsd.org/cgi/man.cgi?query=edgepaint&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html edgepaint]  takes	 as input a graph in DOT format	with node position information (the pos attribute) and colors	the edges in a	manner	making       it easier to tell them apart.
|-
|editorconfig-0.12.2||
|-
|eglgears_x11||
|-
|eglinfo||
|-
|eglkms||
|-
|egltri_x11||
|-
|einfo||
|-
|elfedit||[https://www.freebsd.org/cgi/man.cgi?query=elfedit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html elfedit] - Update	the ELF	header of ELF files. elfedit updates the ELF header of ELF files which have the matching ELF      machine and file	types.	The options control how	and which fields in       the ELF header should be	updated.
|-
|eLut||
|-
|enc2xs||[https://www.freebsd.org/cgi/man.cgi?query=enc2xs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html enc2xs] builds a Perl extension for use by Encode	from either Unicode      Character Mapping files (.ucm) or Tcl Encoding Files (.enc).  Besides       being used internally during the	build process of the Encode module,       you can use enc2xs to add your own encoding to perl.  No	knowledge of       XS is necessary.

|-
|encguess||[https://www.freebsd.org/cgi/man.cgi?query=encguess&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html encguess]	- guess	character encodings of files; The encoding identification is done by checking one encoding type at a        time until all but the right type are eliminated. The set of encoding       types to	try is defined by the -s parameter and defaults	to ascii, utf8       and UTF-16/32 with BOM. This can	be overridden by passing one or	more       encoding	types via the -s parameter. If you need	to pass	in multiple       suspect encoding	types, use a quoted string with	the a space separating       each value.
|-
|enchant||[https://www.freebsd.org/cgi/man.cgi?query=enchant&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Enchant] - a spellchecker;  Enchant	has a global and a per-user ordering file named	enchant.ordering.  It	lets the user specify which spelling backend to	use for	 individual languages	in the case when you care which	backend	gets used. The   global file is located in $(datadir)/enchant and	the per-user  file  is      located in ~/.enchant.  The per-user file takes precedence, if found.
|-
|enchant-2||
|-
|enchant-lsmod||
|-
|enchant-lsmod-2||
|-
|encode_keychange||[https://www.freebsd.org/cgi/man.cgi?query=encode_keychange&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html encode_keychange] produces  a  KeyChange	 string	 using the old and new       passphrases as described	in Section 5 of	RFC 2274 "User-based  Security       Model  (USM)  for  version  3 of	the Simple Network Management Protocol       (SNMPv3)". -t option is mandatory and specifies the hash	transform type       to use.
|-
|engine||The [https://www.freebsd.org/cgi/man.cgi?query=engine&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html engine] command is used to query the status and capabilities of the       specified engine's.  Engines may	be specified before and	after all       other command-line flags.  Only those specified are queried.
|-
|engrampa||[https://www.freebsd.org/cgi/man.cgi?query=engrampa&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Engrampa] is the	official archive manager for the MATE Desktop Environment, it	is a graphical front-end to archiving utilities	 such  as  tar      and zip.	It is a	fork of	File Roller.
|-
|enum_chmLib||
|-
|enumdir_chmLib||
|-
|envsubst||[https://www.freebsd.org/cgi/man.cgi?query=envsubst&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html envsubst] - substitutes environment variables in shell format strings
|-
|eom||[https://www.freebsd.org/cgi/man.cgi?query=eom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html eom] or the Eye of MATE is the official image viewer for the MATE	 Desktop  Environment.  It  aims  to be simplistic, lightweight, and easy to   use. The	Eye of MATE may	also be	used to	perform	basic tasks like image     flipping	and rotation.
|-
|eps2eps||[https://www.freebsd.org/cgi/man.cgi?query=eps2eps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2ps, eps2eps] -	Ghostscript PostScript "distiller"
|-
|epsffit||[https://www.freebsd.org/cgi/man.cgi?query=epsffit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Epsffit] fits an EPSF file (encapsulated PostScript) to a	given bounding
box.   The  coordinates of the box are given by (llx,lly) for the lower       left, and (urx,ury) for the upper right,	in PostScript units (points).
|-
|eqn|| This manual page	describes the GNU version of [https://www.freebsd.org/cgi/man.cgi?query=eqn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html eqn], which	is part	of the  groff document formatting system.  eqn compiles descriptions  of	 equations  embedded	within troff input files into commands that are	understood by	troff.	Normally, it should be invoked using the -e option  of       groff.	The  syntax  is	quite compatible with Unix eqn.	 The output of       GNU eqn cannot be processed with	Unix troff; it must be processed  with       GNU troff.  If no files are given on the	command	line, the standard input will	be read.  A filename of	- will cause the standard input	to  be       read.
|-
|eqn2graph||[https://www.freebsd.org/cgi/man.cgi?query=eqn2graph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Reads]  an  EQN equation (one line) as input; produces an	image file (by
default in Portable Network Graphics format) suitable for  the  Web  as       output.
|-
|erb26||
|-
|es2_info||
|-
|es2gears_x11||
|-
|es2tri||
|-
|escputil||[https://www.freebsd.org/cgi/man.cgi?query=escputil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html escputil] is a command line utility to perform various maintenance tasks       on  Epson  Stylus inkjet	printers.  These tasks include head alignment,       head cleaning, nozzle check, printer identification, and	 retrieval  of       ink level from the printer.
|-
|espeak||
|-
|event_rpcgen.py||
|-
|evince||[https://www.freebsd.org/cgi/man.cgi?query=evince&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Evince] is a document viewer capable of displaying multiple  and	single       page document formats like PDF and Postscript.  For more	general	information	 about	  Evince    please    visit	our	website	    at      [http://www.gnome.org/projects/evince/ Evince] 
|-
|evince-previewer||
|-
|evince-thumbnailer||
|-
|exctags||[https://www.freebsd.org/cgi/man.cgi?query=exctags&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exctags] - Generate tag files for	source code
|-
|exempi||[https://www.freebsd.org/cgi/man.cgi?query=exempi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exempi] -	command	line tool to manipulate	XMP metadata
|-
|exiv2||[https://www.freebsd.org/cgi/man.cgi?query=exiv2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exiv2] is	a program to read and write Exif, IPTC,	XMP metadata and image        comments	and can	read many vendor makernote tags. The  program  optionally  converts  between	Exif tags, XMP properties and IPTC datasets as       recommended by the Exif Standard, the IPTC Standard, the	XMP specification and	Metadata Working Group guidelines.
|-
|exo-csource||[https://www.freebsd.org/cgi/man.cgi?query=exo-csource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exo-csource] is a	small utility that generates C code containing        arbitrary data, useful for compiling texts or other data	directly into       programs.
|-
|exo-desktop-item-edit||
|-
|exo-open||[https://www.freebsd.org/cgi/man.cgi?query=exo-open&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exo-open] is a command line frontend to the Xfce Preferred Applications        framework. It can either	be used	to open	a list of urls with the       default URL handler or launch the preferred application for a certain       category.
|-
|exo-preferred-applications||
|-
|exr2aces||
|-
|exrenvmap||
|-
|exrheader||
|-
|exrmakepreview||
|-
|exrmaketiled||
|-
|exrmultipart||
|-
|exrmultiview||
|-
|exrstdattr||
|-
|ext4fuse||
|-
|external-ip||
|-
|extract_a52||[https://www.freebsd.org/cgi/man.cgi?query=extract_a52&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extract_a52] - extract ATSC A/52 audio from a MPEG stream.
|-
|extract_chmLib||
|-
|extract_dca||[https://www.freebsd.org/cgi/man.cgi?query=extract_dca&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extract_dca] - extract DTS Coherent Acoustics audio from a MPEG stream.
|-
|extract_dts||
|-
|extract_mpeg2||[https://www.freebsd.org/cgi/man.cgi?query=extract_mpeg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extract_mpeg2] - extract MPEG video streams from a multiplexed stream.
|-
|extracticc||
|-
|extractres||[https://www.freebsd.org/cgi/man.cgi?query=extractres&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extractres] - filter to extract resources	from a PostScript document
|-
|extractttag||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content F===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|faad||[https://www.freebsd.org/cgi/man.cgi?query=faad&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html faad] -- Process an Advanced Audio Codec stream;  This utility provides a command line interface to libfaad2.  This  program  reads  in MPEG-4 AAC files, processes, and	outputs	them in	either       Microsoft WAV, MPEG-4 AAC ADTS, or standard PCM formats.
|-
|fakeCMY||
|-
|fakeread||
|-
|fax2ps||[https://www.freebsd.org/cgi/man.cgi?query=fax2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fax2ps] -	convert	a TIFF facsimile to compressed PostScripttm

|-
|fax2tiff||[https://www.freebsd.org/cgi/man.cgi?query=fax2tiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fax2tiff]	- create a TIFF	Class F	fax file from raw fax data

|-
|fbo_firecube||
|-
|fbobind||
|-
|fbotexture||
|-
|fbsdpkgupdate||
|-
|fc_solve_find_index_s2ints.py||
|-
|fc-cache||[https://www.freebsd.org/cgi/man.cgi?query=fc-cache&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-cache] - build	font information cache files; fc-cache	 scans	the font directories on	the system and builds font information cache files for applications using fontconfig for their  font       handling.
|-
|fc-cat||[https://www.freebsd.org/cgi/man.cgi?query=fc-cat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-cat] reads the	font information from cache files or related  to  font        directories and emits it	in ASCII form.
|-
|fc-conflist||
|-
|fc-list||[https://www.freebsd.org/cgi/man.cgi?query=fc-list&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-list] lists fonts and styles available	on the system for applications
using  fontconfig.   If	any  elements  are  specified,	only those are       printed.	 Otherwise family and style are	printed, unless	verbose	output       is requested.
|-
|fc-match||[https://www.freebsd.org/cgi/man.cgi?query=fc-match&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  fc-match] matches	pattern	(empty pattern by default)  using  the	normal fontconfig matching rules to find the best font available. If --sort is      given, the sorted list of best matching fonts is	displayed.  The	 --all       option  works like --sort except	that no	pruning	is done	on the list of
fonts.
|-
|fc-pattern||[https://www.freebsd.org/cgi/man.cgi?query=fc-pattern&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-pattern] parses pattern (empty	pattern	 by  default)  and  shows  the
parsed  result.	If --config is given, config substitution is performed       on the pattern before being displayed.  If --default is given,  default       substitution is performed on the	pattern	before being displayed.
|-
|fc-query||[https://www.freebsd.org/cgi/man.cgi?query=fc-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-query] queries  font-file(s)	using  the normal fontconfig rules and
prints out font pattern for each	face found.  If	--index	is given, only       one face	of each	file is	queried, otherwise all faces are queried.
|-
|fc-scan||[https://www.freebsd.org/cgi/man.cgi?query=fc-scan&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-scan] scans file(s) recursively and prints out	font pattern for  each
face found.
|-
|fc-solve||[https://www.freebsd.org/cgi/man.cgi?query=fc-solve&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-solve] - automated solver for Freecell	and related Solitiare variants
|-
|fc-validate||[https://www.freebsd.org/cgi/man.cgi?query=fc-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-validate] validates font-file(s) if each fonts	satisfies the language
coverage	 according to the orthography files in fontconfig.  If --index       is given, only one face of each file is validated, otherwise all	 faces       are validated.
|-
|ffmpeg||[https://www.freebsd.org/cgi/man.cgi?query=ffmpeg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ffmpeg] is a very	fast video and audio converter that can	also grab from    a live audio/video source. It can also convert between arbitrary	sample      rates and resize	video on the fly with a	high quality polyphase filter.
|-
|ffprobe||[https://www.freebsd.org/cgi/man.cgi?query=ffprobe&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ffprobe] gathers information from	multimedia streams and prints it in human- and machine-readable fashion.  For example it can be used to check the format of the container used by    a multimedia stream and the format and type of each media stream       contained in it.
|-
|fftw-wisdom||[https://www.freebsd.org/cgi/man.cgi?query=fftw-wisdom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fftw-wisdom] is	a utility to generate FFTW wisdom files, which contain
saved information about how to optimally	compute	 (Fourier)  transforms     of  various  sizes.  FFTW is a free library to compute discrete Fourier       transforms in one or more dimensions, for arbitrary sizes, and of  both
real  and  complex data,	among other related operations.	 More information on FFTW can	be found at the	FFTW home page: http://www.fftw.org 
|-
|fftw-wisdom-to-conf||[https://www.freebsd.org/cgi/man.cgi?query=fftw-wisdom-to-conf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fftw-wisdom-to-conf]  is	a utility to generate C	configuration routines     from FFTW wisdom	files, where  the  latter  contain  saved  information       about  how  to optimally	compute	(Fourier) transforms of	various	sizes.      A configuration routine is a C subroutine that you link into your  program,  replacing	 a  routine of the same	name in	the FFTW library, that       determines which	parts of FFTW are callable by your program.

|-
|fftwf-wisdom||[https://www.freebsd.org/cgi/man.cgi?query=fftwf-wisdom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fftwf-wisdom]  is	a utility to generate FFTW wisdom files, which contain
saved information about how to optimally	compute	 (Fourier)  transforms     of  various  sizes.  FFTW is a free library to compute discrete Fourier       transforms in one or more dimensions, for arbitrary sizes, and of  both
real  and  complex data,	among other related operations.	 More information on FFTW can	be found at the	FFTW home page:	http://www.fftw.org
|-
|fh2raw||
|-
|fh2svg||
|-
|fh2text||
|-
|FileCheck80||
|-
|fill||
|-
|find-all-symbols80||
|-
|find-freecell-deal-index.py||
|-
|findsmb||[https://www.freebsd.org/cgi/man.cgi?query=findsmb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html findsmb] is a perl script	that prints out	several	pieces of information
about machines on a subnet that respond to SMB name query requests.
|-
|fire||
|-
|fish||[https://www.freebsd.org/cgi/man.cgi?query=fish&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fish] is a command-line shell written mainly with	interactive use	in     mind. The full manual is	available in HTML by using the help command   from inside fish.
|-
|fish_indent||[https://www.freebsd.org/cgi/man.cgi?query=fish_indent&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fish_indent] is used to indent a piece of	fish code. fish_indent reads       commands	from standard input and	outputs	them to	standard output	or a       specified file.
|-
|fish_key_reader||[https://www.freebsd.org/cgi/man.cgi?query=fish_key_reader&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fish_key_reader] is used to study	input received from the	terminal and
can help	with key binds.	The program is interactive and works on     standard	input. Individual characters themselves	and their hexadecimal     values are displayed.
|-
|five-or-more||[https://www.freebsd.org/cgi/man.cgi?query=five-or-more&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html five-or-more]  is	the GNOME port of the once popular Windows game	called
Colour Lines.  The game's objective is to align as  often  as  possible       five  or	more objects of	the same colour	and shape causing them to disappear.
|-
|fix-qdf||[https://www.freebsd.org/cgi/man.cgi?query=fix-qdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fix-qdf] - repair	PDF files in QDF form after editing

|-
|fixdlsrps||[https://www.freebsd.org/cgi/man.cgi?query=fixdlsrps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixdlsrps] is a perl filter which "fixes" PostScript generated from the       DviLaser/PS driver so that it works correctly with Angus	Duggan's  psutils package.
|-
|fixfmps||[https://www.freebsd.org/cgi/man.cgi?query=fixfmps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixfmps] - filter	to fix Framemaker documents so PSUtils work
|-
|fixmacps||[https://www.freebsd.org/cgi/man.cgi?query=fixmacps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixmacps] - filter to fix	Macintosh documents with saner version of md

|-
|fixproc||[https://www.freebsd.org/cgi/man.cgi?query=fixproc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixes a process named "proc"] by performing the specified	 action.   The
actions	can  be	 check,	 kill,	restart, exist,	or fix.	 The action is       specified on the	command	line or	is read	from a default database, which       describes  the  default	action to take for each	process.  The database
format and the meaning of each action are described below.

|-
|fixpsditps||[https://www.freebsd.org/cgi/man.cgi?query=fixpsditps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixpsditps]  is a	perl filter which "fixes" PostScript from Transcript's
psdit program so	that it	works correctly	with  Angus  Duggan's  psutils      package.
|-
|fixpspps||[https://www.freebsd.org/cgi/man.cgi?query=fixpspps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixpspps]	- filter to fix	PSPrint	PostScript so PSUtils work
|-
|fixscribeps||[https://www.freebsd.org/cgi/man.cgi?query=fixscribeps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixscribeps] - filter to fix Scribe documents so PSUtils work

|-
|fixtpps||[https://www.freebsd.org/cgi/man.cgi?query=fixtpps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixtpps] - filter	to fix Tpscript	documents to work with PSUtils
|-
|fixwfwps||[https://www.freebsd.org/cgi/man.cgi?query=fixwfwps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixwfwps] is  a perl filter which "fixes" PostScript from Word for Windows so that it works correctly with Angus Duggan's psutils package.
|-
|fixwpps||[https://www.freebsd.org/cgi/man.cgi?query=fixwpps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixwpps] - filter	to fix WP documents so PSUtils work
|-
|fixwwps||[https://www.freebsd.org/cgi/man.cgi?query=fixwwps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixwwps] is a perl filter	which "fixes" PostScript from Windows Write so
that it works correctly with Angus Duggan's psutils package.
|-
|flac||[https://www.freebsd.org/cgi/man.cgi?query=flac&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html flac] is a command-line tool for encoding, decoding, testing and analyzing FLAC	streams.

|-
|flat-clip||
|-
|fmfconv||[https://www.freebsd.org/cgi/man.cgi?query=fmfconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fmfconv] -- Fuse Movie File converter
|-
|fogcoord||
|-
|folks-import||
|-
|folks-inspect||
|-
|foomatic-combo-xml||The  [https://www.freebsd.org/cgi/man.cgi?query=foomatic-combo-xml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Foomatic  acceleration  engine] written in C	(by Till), it computes        printer/driver combo XML	files and the printer overview XML file.
|-
|foomatic-compiledb||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-compiledb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-compiledb] - Compile the	Foomatic printer/driver	database

|-
|foomatic-configure||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-configure&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-configure]  -  the  main	 configuration program of the foomatic printing	system.
|-
|foomatic-perl-data||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-perl-data&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-perl-data] - generate Perl data structures from XML
|-
|foomatic-ppd-options||The [https://www.freebsd.org/cgi/man.cgi?query=foomatic-ppd-options&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-ppd-options] program	reads the specified PPD	files or stdin        and decodes the PPD file	to produce a list of options.  This is	really       just a text based version of other print	configuration tools.

|-
|foomatic-ppd-to-xml||
|-
|foomatic-ppdfile||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-ppdfile&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-ppdfile] - Generate a PPD file for a given printer/driver combo
|-
|foomatic-printjob||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-printjob&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-printjob]  - manage printer jobs	in a spooler-independent fashion
|-
|foomatic-searchprinter||
|-
|four-in-a-row||[https://www.freebsd.org/cgi/man.cgi?query=four-in-a-row&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Four-in-a-Row] - four-in-a-row game for GNOME; The object of the game is to build a line of four of your marbles while     trying to stop your opponent (human or computer)	building a line	of his
or her own. A line can be horizontal, vertical or diagonal.

|-
|fplight||
|-
|fragcoord||
|-
|freecell-solver-fc-pro-range-solve||
|-
|freecell-solver-multi-thread-solve||
|-
|freecell-solver-range-parallel-solve||
|-
|freetype-config||[https://www.freebsd.org/cgi/man.cgi?query=freetype-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html freetype-config] - Get information about a libfreetype installation
|-
|fribidi||
|-
|fribidi-config||
|-
|fs-tri||
|-
|fsfs-access-map||
|-
|fsfs-stats||
|-
|fslight||
|-
|fsraytrace||
|-
|funzip||[https://www.freebsd.org/cgi/man.cgi?query=funzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html funzip] -	filter for extracting from a ZIP archive in a pipe

|-
|fuse||[https://www.freebsd.org/cgi/man.cgi?query=fuse&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fuse]  is	 a  Sinclair  ZX Spectrum emulator. It supports	several	models        (including the 128), with quite faithful	emulation of the  display  and       sound.
|-
|fuse-ext2||
|-
|fuse-ext2.probe||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content G===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|g-ir-annotation-tool||
|-
|g-ir-compiler||[https://www.freebsd.org/cgi/man.cgi?query=g-ir-compiler&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html g-ir-compiler]  converts one or more GIR files into one or more typelib.
The output will be written to standard output unless  the  --output  is      specified.
|-
|g-ir-generate||[https://www.freebsd.org/cgi/man.cgi?query=g-ir-generate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html g-ir-generate]  is an GIR	generator, using the repository	API. It	generates GIR	files from a raw typelib or in	a  shared  library  (--shlib).       The  output  will  be written to	standard output	unless the --output is       specified.
|-
|g-ir-inspect||
|-
|g-ir-scanner||[https://www.freebsd.org/cgi/man.cgi?query=g-ir-scanner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html g-ir-scanner] is a tool which generates GIR XML files by parsing headers
and introspecting GObject based libraries.  It is usually invoked  during the normal build step for a project and the information is saved to    disk and	later installed, so that language bindings and other  applications can use it.  Header files and source files	are passed in as arguments on	the command line.  The suffix determines  whether  a  file  be     treated	as  a source file (.c) or a header file	(.h). Currently	only C    based libraries are supported by	the scanner.
|-
|g++9||
|-
|gacutil||[https://www.freebsd.org/cgi/man.cgi?query=gacutil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gacutil]	is  a  tool used by developers to install versioned assemblies
into the	system Global Assembly Cache (GAC) to become part of  the  assemblies	that are available for all applications	at runtime.
|-
|gacutil2||
|-
|gamma||[https://www.freebsd.org/cgi/man.cgi?query=gamma&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gamma()], gammaf(),	gamma_r(), and gammaf_r() are deprecated aliases for lgamma(), lgammaf(), lgamma_r(), and lgammaf_r(), respectively.
|-
|gamma4scanimage||The  tool  [https://www.freebsd.org/cgi/man.cgi?query=gamma4scanimage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gamma4scanimage] creates a gamma table	in the format expected      by scanimage. You can define a gamma, a shadow and a  highlight	value.       You also	can specify the	size (maxin) and maximum output	value (maxout)       of the gamma table.
|-
|gapi2-codegen||
|-
|gapi2-fixup||
|-
|gapi2-parser||
|-
|gapplication||[https://www.freebsd.org/cgi/man.cgi?query=gapplication&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gapplication] - D-Bus application	launcher
|-
|[[GBI|gbi]]||GBI stands for Graphical BSD installer. 
|-
|gc||[https://www.freebsd.org/cgi/man.cgi?query=gc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gc]  is  a graph analogue	to wc in that it prints	to standard output the    number of nodes,	edges, connected components or clusters	 contained  in     the  input  files.  It also prints a total count	for all	graphs if more      than one	graph is given.
|-
|gcc9||
|-
|gcc-ar9||
|-
|gcc-nm9||
|-
|gcc-ranlib9||
|-
|gcm-calibrate||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool

|-
|gcm-import||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool

|-
|gcm-inspect||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
|-
|gcm-picker||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
|-
|gcm-viewer||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
|-
|gconf-merge-tree||
|-
|gconfsharp2-schemagen||
|-
|gconftool-2||[https://www.freebsd.org/cgi/man.cgi?query=gconftool-2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gconftool-2] - GNOME configuration tool; Each  preference	 in  the  GConf	repository is expressed	as a key-value      pair. A GConf preference	key is an element in the GConf repository that       corresponds  to	an  application	preference.  Preference	keys typically       have simple values such as strings, integers, or	lists of  strings  and       integers. 
|-
|gcov9||
|-
|gcov-dump9||
|-
|gcov-tool9||
|-
|gcr-viewer||
|-
|gd2copypal||
|-
|gd2togif||
|-
|gd2topng||
|-
|gdbm_dump||The  [https://www.freebsd.org/cgi/man.cgi?query=gdbm_dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbm_dump] utility creates a	dump of	the specified [https://www.freebsd.org/cgi/man.cgi?query=gdbm&sektion=3&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gdbm(3)] database       file.  The name for the output dump file	is supplied by the second  argument  (FILE).	 If not	specified, the output goes to the standard error.

|-
|gdbm_load||[https://www.freebsd.org/cgi/man.cgi?query=gdbm_load&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbm_load] - re-create a GDBM database from a dump file.
|-
|gdbmtool||The  [https://www.freebsd.org/cgi/man.cgi?query=gdbmtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbmtool]  utility  allows  you to view and modify an existing GDBM        database	or to create a new one.

|-
|gdbus||[https://www.freebsd.org/cgi/man.cgi?query=gdbus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbus] - Tool for	working	with D-Bus objects
|-
|gdbus-codegen||[https://www.freebsd.org/cgi/man.cgi?query=gdbus-codegen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbus-codegen] is	used to	generate code and/or documentation for one or
more D-Bus interfaces. The tool reads D-Bus Introspection XML[1]	files       and generates output files. The tool currently supports generating C       code (via --generate-c-code) and	Docbook	XML (via --generate-docbook).
|-
|gdcmpgif||
|-
|gdialog||
|-
|gdiffmk||[https://www.freebsd.org/cgi/man.cgi?query=gdiffmk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdiffmk]	compares  two groff(1),	nroff(1), or troff(1) documents, file1
and file2, and creates an output	which  is  file2  with	added  `margin       character' (.mc)	commands that indicate the differences.
|-
|gdk-pixbuf-csource||[https://www.freebsd.org/cgi/man.cgi?query=gdk-pixbuf-csource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdk-pixbuf-csource] is a small utility that generates C code containing      images, useful for compiling images directly into programs.

|-
|gdk-pixbuf-pixdata||
|-
|gdk-pixbuf-query-loaders||[https://www.freebsd.org/cgi/man.cgi?query=gdk-pixbuf-query-loaders&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdk-pixbuf-query-loaders] collects information about loadable modules    for gdk-pixbuf and writes it to the default cache file location,	or to       stdout.
|-
|gdk-pixbuf-thumbnailer||
|-
|gdlib-config||
|-
|gdparttopng||
|-
|gdtopng||
|-
|gearbox||
|-
|gears||[https://www.freebsd.org/cgi/man.cgi?query=gears&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gears] - draw interlocking gears,	for xscreensaver.
|-
|geartrain||
|-
|gegl||
|-
|gegl-imgcmp||
|-
|genbrk||[https://www.freebsd.org/cgi/man.cgi?query=genbrk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genbrk] reads the	break (boundary) rule source code from	rule-file  and        creates	a  break  iteration data file. Normally	this data file has the     .brk extension.
|-
|gencfu||[https://www.freebsd.org/cgi/man.cgi?query=gencfu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gencfu] reads confusable character definitions in	the input file,	 which  are plain text files containing confusable character definitions	in the      input format defined by Unicode UAX39 for the files confusables.txt and       confusablesWholeScript.txt.  This source	(.txt) format is also accepted      by ICU spoof detectors.	The files must be  encoded  in	utf-8  format,       with  or	without	a BOM.	
|-
|gencnval||[https://www.freebsd.org/cgi/man.cgi?query=gencnval&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gencnval] converts the ICU aliases file converterfile  into  the	binary
file  cnvalias.icu.  This binary	file can then be read directly by ICU,  or used by [https://www.freebsd.org/cgi/man.cgi?query=pkgdata&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports pkgdata(1)] for incorporation into a larger  archive  or  library.

|-
|gendict||[https://www.freebsd.org/cgi/man.cgi?query=gendict&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gendict] reads  the word	list from dictionary-file and creates a	string
trie dictionary file. Normally this data	file has the .dict extension.
|-
|genmipmap||
|-
|genrb||[https://www.freebsd.org/cgi/man.cgi?query=genrb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genrb] converts the resource bundle source files passed on  the  commandline  to	their binary form or to	a Java source file for use with	ICU4J.       The resulting binary files have a .res extension	while resource	bundle       source  files typically have a .txt extension. Java source files	have a
java extension and follow the ICU4J naming conventions.
|-
|gentest||[https://www.freebsd.org/cgi/man.cgi?query=gentest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gentest] - Run random generic SMB	operations against two SMB servers and
show the	differences in behavior

|-
|gentrigrams||
|-
|genxs||[https://www.freebsd.org/cgi/man.cgi?query=genxs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genxs]  is  a  tool  for generating custom XML serialization writers and readers for classes.

|-
|geom-outlining-130||
|-
|geom-outlining-150||
|-
|geom-sprites||
|-
|geom-stipple-lines||
|-
|geom-wide-lines||
|-
|getafm||[https://www.freebsd.org/cgi/man.cgi?query=getafm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Getafm]  generates a PostScript file which prints	an AFM file for	a font        to the printer's	output channel.	The output of getafm should be sent to       a printer, or to	GhostScript.
|-
|getopt||The [https://www.freebsd.org/cgi/man.cgi?query=getopt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html getopt] utility	is used	to break up options in command lines for easy
parsing by	shell procedures, and to check for legal options.
|-
|gettext||The  [https://www.freebsd.org/cgi/man.cgi?query=gettext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gettext]  program  translates  a  natural language message into the
user's language,	by looking up the translation in a message catalog.
|-
|gettext.sh||
|-
|gettextize||[https://www.freebsd.org/cgi/man.cgi?query=gettextize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gettextize] - install or upgrade gettext infrastructure

|-
|gfortran9||
|-
|gif2rgb||[https://www.freebsd.org/cgi/man.cgi?query=gif2rgb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gif2rgb] - convert images	saved as GIF to	24-bit RGB triplets
|-
|gif2webp||[https://www.freebsd.org/cgi/man.cgi?query=gif2webp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gif2webp] - Convert a GIF	image to WebP
|-
|gifbuild||[https://www.freebsd.org/cgi/man.cgi?query=gifbuild&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gifbuild] - dump GIF data	in a textual format, or	undump it to a GIF
|-
|gifclrmp||[https://www.freebsd.org/cgi/man.cgi?query=gifclrmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gifclrmp] - extract colormaps from GIF images
|-
|giffix||[https://www.freebsd.org/cgi/man.cgi?query=giffix&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html giffix] -	attempt	to fix up broken GIFs
|-
|giftext||[https://www.freebsd.org/cgi/man.cgi?query=giftext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html giftext] - dump GIF pixels and metadata as text
|-
|giftogd2||
|-
|giftool||giftool - GIF transformation tool
|-
|gimp-2.10||[https://www.freebsd.org/cgi/man.cgi?query=gimp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gimp] - an image manipulation and	paint program.

|-
|gimp-test-clipboard-2.0||
|-
|gimptool-2.0||
|-
|gio||[https://www.freebsd.org/cgi/man.cgi?query=gio&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gio] - To configure a project to use Giovanni simply put a `.giovanni.conf`        file in the root	directory of your project and run `gio deploy`.	
|-
|gio-querymodules||[https://www.freebsd.org/cgi/man.cgi?query=gio-querymodules&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gio-querymodules] creates	a giomodule.cache file in the listed       directories. This file lists the	implemented extension points for each       module that has been found. It is used by GIO at	runtime	to avoid       opening all modules just	to find	out which extension points they	are       implementing.
|-
|git||[https://www.freebsd.org/cgi/man.cgi?query=git&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git] - the stupid	content	tracker; Git is a	fast, scalable,	distributed revision control system with an      unusually rich command set that provides	both high-level	operations and       full access to internals.
See [https://www.freebsd.org/cgi/man.cgi?query=gittutorial&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gittutorial(7)] to get started, then see [https://www.freebsd.org/cgi/man.cgi?query=giteveryday&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports giteveryday(7)] for a	useful       minimum set of commands.	The Git	User's Manual[1] has a more in-depth       introduction.
After you mastered the basic concepts, you can come back	to this	page       to learn	what commands Git offers. You can learn	more about individual       Git commands with "git help command". [https://www.freebsd.org/cgi/man.cgi?query=gitcli&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gitcli(7)] manual page gives you
an overview of the command-line command syntax.        A formatted and hyperlinked copy	of the latest Git documentation	can be       viewed at https://git.github.io/htmldocs/git.html.
|-
|git-cvsserver||[https://www.freebsd.org/cgi/man.cgi?query=git-cvsserver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-cvsserver] - A CVS server emulator for Git; This application	is a CVS emulation layer for Git.
It is highly functional.	However, not all methods are implemented, and       for those methods that are implemented, not all switches	are       implemented.

|-
|git-p4.py||
|-
|git-receive-pack||[https://www.freebsd.org/cgi/man.cgi?query=git-receive-pack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-receive-pack] - Receive what is pushed into the repository
|-
|git-shell||[https://www.freebsd.org/cgi/man.cgi?query=git-shell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-shell] - Restricted login shell for Git-only SSH access
|-
|git-upload-archive||[https://www.freebsd.org/cgi/man.cgi?query=git-upload-archive&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-upload-archive] - Send archive back to git-archive
|-
|git-upload-pack||[https://www.freebsd.org/cgi/man.cgi?query=git-upload-pack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-upload-pack] - Send objects packed back to git-fetch-pack
|-
|gjs-console||
|-
|glewinfo||
|-
|glib-compile-resources||[https://www.freebsd.org/cgi/man.cgi?query=glib-compile-resources&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-compile-resources] reads the	resource description from FILE and the   files that it references	and creates a binary resource bundle that is       suitable	for use	with the GResource API.	The resulting bundle is	then       written out as-is, or as	C source for linking into an application.
|-
|glib-compile-schemas||[https://www.freebsd.org/cgi/man.cgi?query=glib-compile-schemas&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-compile-schemas] compiles all the GSettings XML schema files	in        DIRECTORY into a	binary file with the name gschemas.compiled that can       be used by GSettings. The XML schema files must have the	filename       extension .gschema.xml. For a detailed description of the XML file       format, see the GSettings documentation.
|-
|glib-genmarshal||[https://www.freebsd.org/cgi/man.cgi?query=glib-genmarshal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-genmarshal] is a small utility that generates C code	marshallers       for callback functions of the GClosure mechanism	in the GObject       sublibrary of GLib. The marshaller functions have a standard signature,       they get	passed in the invoking closure,	an array of value structures       holding the callback function parameters	and a value structure for the       return value of the callback. The marshaller is then responsible	to       call the	respective C code function of the closure with all the       parameters on the stack and to collect its return value.
|-
|glib-gettextize||[https://www.freebsd.org/cgi/man.cgi?query=glib-gettextize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-gettextize] helps to	prepare	a source package for being       internationalized through gettext. It is	a variant of the gettextize       that ships with gettext.
|-
|glib-mkenums||[https://www.freebsd.org/cgi/man.cgi?query=glib-mkenums&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-mkenums] is a small perl-script utility that	parses C code to       extract enum definitions	and produces enum descriptions based on	text       templates specified by the user.	Most frequently	this script is used to       produce C code that contains enum values	as strings so programs can       provide value name strings for introspection.
|-
|glilypond||[https://www.freebsd.org/cgi/man.cgi?query=glilypond&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glilypond] -- integrate lilypond parts into groff

|-
|glinfo||
|-
|gloss||
|-
|glsl-compile-time||
|-
|glslstateschange||
|-
|glsync||
|-
|gltestperf||
|-
|glthreads||
|-
|glxcontexts||
|-
|glxdemo||
|-
|glxgears||
|-
|glxgears_fbconfig||
|-
|glxgears_pixmap||
|-
|glxheads||
|-
|glxinfo||
|-
|glxpbdemo||
|-
|glxpixmap||
|-
|glxsnoop||
|-
|glxswapcontrol||
|-
|gml2gv||[https://www.freebsd.org/cgi/man.cgi?query=gml2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gml2gv]  converts	 a graph specified in the GML format to	a graph	in the
GV (formerly DOT) format.  gv2gml converts a graph specified in the  GV       format to a graph in the	GML format.
|-
|gnome-2048||
|-
|gnome-calendar||GNOME Calendar is a simple and beautiful calendar application designed to perfectly fit the GNOME desktop. By reusing the components which the GNOME desktop is build on, Calendar nicely integrates with the
GNOME ecosystem.
|-
|gnome-chess||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-clocks||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-contacts||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-control-center||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-dictionary||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-doc-prepare||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-doc-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-font-viewer||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-keyring-3||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-keyring-daemon||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-klotski||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-mahjongg||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-mines||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-mount||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-nibbles||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-open||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-photos||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-robots||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-screenshot||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-search-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-shell||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-shell-extension-prefs||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-shell-extension-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-shell-perf-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-sudoku||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-system-log||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-system-monitor||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-taquin||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-tetravex||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-thumbnail-font||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnome-todo||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnomevfs-cat||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-copy||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-df||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-info||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-ls||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-mkdir||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-monitor||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-mv||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnomevfs-rm||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
|-
|gnote||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnuchess||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnuchessu||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnuchessx||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
|-
|gnutls-cli||[https://www.freebsd.org/cgi/man.cgi?query=gnutls-cli&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gnutls-cli] - GnuTLS client;  Simple client program to	set up a TLS connection	 to  some  other  com   puter.  It sets up a TLS	connection and forwards	data from the standard
input to	the secured socket and vice versa.
|-
|gnutls-cli-debug||
|-
|gnutls-serv||
|-
|gobject-query||
|-
|bin/gpatch||
|-
|gperl||
|-
|gpg2||[https://www.freebsd.org/cgi/man.cgi?query=gpg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg2] - OpenPGP encryption and signing tool
|-
|gpg-agent||[https://www.freebsd.org/cgi/man.cgi?query=gpg-agent&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg-agent] - Secret key management for GnuPG
|-
|gpg-connect-agent||The  [https://www.freebsd.org/cgi/man.cgi?query=gpg-connect-agent&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg-connect-agent]  is a utility to communicate with	a running gpgagent.  It is useful to check out the commands gpg-agent	provides using       the Assuan interface.  It might also be useful for scripting simple applications.  Input is expected at stdin and out	put  gets  printed  to       stdout.
|-
|gpg-error||
|-
|gpg-error-config||[https://www.freebsd.org/cgi/man.cgi?query=gpg-error-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg-error-config] is a tool that is used to configure to	determine  the       compiler	 and linker flags that should be used to compile and link programs that use Libgpg-error. It is also	used  internally  to  the  .m4     macros for GNU autoconf that are	included with Libgpg-error.
|-
|gpg-wks-server||
|-
|gpgconf||[https://www.freebsd.org/cgi/man.cgi?query=gpgconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgconf] - Modify	.gnupg home directories
|-
|gpgme-config||
|-
|gpgme-json||
|-
|gpgme-tool||
|-
|gpgparsemail||[https://www.freebsd.org/cgi/man.cgi?query=gpgparsemail&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgparsemail] - Parse a mail message into	an annotated format
|-
|gpgrt-config||
|-
|gpgscm||
|-
|gpgsm||[https://www.freebsd.org/cgi/man.cgi?query=gpgsm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgsm]  is a tool	similar	to gpg to provide digital encryption and signing services on X.509 certificates and the CMS protocol.	 It is	mainly       used  as	 a  backend for	S/MIME mail processing.	 gpgsm includes	a full       featured	certificate management and complies with all rules defined for
the German Sphinx project.
|-
|gpgtar||
|-
|gpgv2||[https://www.freebsd.org/cgi/man.cgi?query=gpgv2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgv2] is	an OpenPGP signature verification tool.
|-
|gphoto2-config||
|-
|gphoto2-port-config||
|-
|gphotofs||
|-
|gpinyin||[https://www.freebsd.org/cgi/man.cgi?query=gpinyin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpinyin] - Chinese European-like writing within groff
|-
|gprof||The [https://www.freebsd.org/cgi/man.cgi?query=gprof&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gprof] utility produces	an execution profile of	C, Pascal, or Fortran77 programs.  The effect of called routines is	incorporated in	the     profile of	each caller. 
|-
|gr2fonttest||
|-
|granite-demo||
|-
|grap2graph||[https://www.freebsd.org/cgi/man.cgi?query=grap2graph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grap2graph] - convert a grap diagram into	a cropped bitmap image

|-
|graphml2gv||[https://www.freebsd.org/cgi/man.cgi?query=graphml2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html graphml2gv]  converts a graph specified in the GRAPHML format to a graph
in the GV (formerly DOT)	format.

|-
|gresource||[https://www.freebsd.org/cgi/man.cgi?query=gresource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gresource] offers	a simple commandline interface to GResource. It	lets
you list	and extract resources that have	been compiled into a resource      file or included	in an elf file (a binary or a shared library).

|-
|greytiff||
|-
|grl-inspect-0.3||[https://www.freebsd.org/cgi/man.cgi?query=grl-inspect-0.3&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grl-inspect]  is	a  tool	that prints out	information on available Grilo
sources and metadata keys. When executed	with no	SOURCE argument,  grlinspect	will  print the	list of	all plugins and	sources. When executed   with a SOURCE, grl-inspect will print information about that source.

|-
|grl-launch-0.3||[https://www.freebsd.org/cgi/man.cgi?query=grl-launch-0.3&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grl-launch]  is a	tool that allows the user to run Grilo operations from
the command line.
|-
|grn||[https://www.freebsd.org/cgi/man.cgi?query=grn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grn] - groff preprocessor	for gremlin files
|-
|grodvi||[https://www.freebsd.org/cgi/man.cgi?query=grodvi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grodvi] is a driver for groff that produces TeX dvi format.  Normally it       should  be run by groff -Tdvi.  This will run troff -Tdvi; it will also       input the macros	in /usr/share/tmac/dvi.tmac.
|-
|groff||[https://www.freebsd.org/cgi/man.cgi?query=groff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html groff] - front-end for the groff document	formatting system
|-
|groffer||The [https://www.freebsd.org/cgi/man.cgi?query=groffer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html groffer] program is the easiest way to use groff(1).	It can display       arbitrary documents written in the groff(7) language or	other  roff(7)       languages  that	are  compatible	 to  the original troff	language.  The       groffer program also includes many of the features for finding and displaying	the UNIX manual	pages (man pages), such	that it	can be used as       a replacement for a man(1) program. 
|-
|grog||[https://www.freebsd.org/cgi/man.cgi?query=grog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grog] - guess options for	groff command
|-
|grolbp||[https://www.freebsd.org/cgi/man.cgi?query=grolbp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grolbp]  - groff driver for Canon	CAPSL printers (LBP-4 and LBP-8	series       laser printers)
|-
|grolj4||[https://www.freebsd.org/cgi/man.cgi?query=grolj4&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grolj4]  is a driver for groff that produces output in PCL5 format suitable for	an HP Laserjet 4 printer.
|-
|gropdf||[https://www.freebsd.org/cgi/man.cgi?query=gropdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gropdf]  translates  the	output	of  GNU	troff to PDF.
|-
|grops||[https://www.freebsd.org/cgi/man.cgi?query=grops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grops] translates	the output of GNU troff	to PostScript.	
|-
|grotty||[https://www.freebsd.org/cgi/man.cgi?query=grotty&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grotty] -	groff driver for typewriter-like devices

|-
|growisofs||[https://www.freebsd.org/cgi/man.cgi?query=growisofs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html growisofs] - combined mkisofs frontend/DVD recording program.
|-
|gs||[https://www.freebsd.org/cgi/man.cgi?query=gs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gs]  -  Ghostscript  (PostScript	and  PDF language interpreter and previewer)

|-
|gs-tri||
|-
|gsbj||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsbj] - Format and print text for	BubbleJet printer using	ghostscript
|-
|gsdj||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsdj] - Format and print text for	DeskJet	printer	using ghostscript
|-
|gsdj500||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsdj500] - Format and print text	for DeskJet 500	BubbleJet using	ghostscript
|-
|gsettings||[https://www.freebsd.org/cgi/man.cgi?query=gsettings&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsettings] - GSettings configuration tool
|-
|gsettings-data-convert||[https://www.freebsd.org/cgi/man.cgi?query=gsettings-data-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsettings-data-convert] reads values out of the users GConf database and     stores them in GSettings.

|-
|gsettings-schema-convert||[https://www.freebsd.org/cgi/man.cgi?query=gsettings-schema-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsettings-schema-convert] converts between GConf and GSettings schema      file formats. Note that the conversion is not expected to be fully       automated. You are expected to verify and edit the result of the       conversion.
|-
|gsf||[https://www.freebsd.org/cgi/man.cgi?query=gsf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsf]  is	a simple archive utility, somewhat similar to tar(1). It operates on files following one of the structured file  formats  understood       by  the	G  Structured  File  library, for example, Microsoft Excel(TM)      files.
|-
|gsf-office-thumbnailer||[https://www.freebsd.org/cgi/man.cgi?query=gsf-office-thumbnailer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsf-office-thumbnailer] is used internally by GNOME applications such as      nautilus	to generate thumbnails of several types	of office  application       files.  While  it  is possible to invoke	it manually, it	is usually invoked automatically by nautilus.

|-
|gsf-vba-dump||[https://www.freebsd.org/cgi/man.cgi?query=gsf-vba-dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsf-vba-dump] - extract Visual Basic for Applications macros Various	Microsoft  binary  data	 formats, including Excel (.xls), Word    (.doc) and PowerPoint (.ppt) can	embed macro code streams. These	 macro       streams	are in P-code (intermediate language) compiled from Visual Basic for Applications (VBA).     The gsf-vba-dump	utility	extracts these macro streams.

|-
|gslj||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gslj] - Format and print text for	LaserJet printer using ghostscript
|-
|gslp||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gslp] - Format and print text using ghostscript
|-
|gsnd||[https://www.freebsd.org/cgi/man.cgi?query=gsnd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsnd] - Run ghostscript (PostScript and PDF engine) without display
|-
|gsound-play||
|-
|gsraytrace||
|-
|gst-device-monitor-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-device-monitor-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-device-monitor-1.0]  is a command line tool that can be used to test       GStreamer's device monitoring functionality. By default	it  will  just       print  a	 list  of all devices found and	exit, but you can also make it       wait around for more devices by passing the --follow  option.  You  can       also pass it one	or more	filter arguments to filter the kind of devices       you are interested in.
|-
|gst-discoverer-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-discoverer-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-discoverer-1.0]  is  a tool that can be used to print	basic metadata        and stream information about a media file. It can be run	on  individual       files  or  whole	 directories.  It will recurse into sub-directories in       that case.
|-
|gst-inspect-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-inspect-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-inspect]  is	a  tool	 that  prints  out  information	 on  available
GStreamer plugins, information about a particular plugin,  or  information  about a particular	element.  When executed	with no	PLUGIN or ELEMENT argument, gst-inspect will print a list of all  plugins  and  elements  together with a summary.	When executed with a PLUGIN or ELEMENT       argument, gst-inspect will print	information about that plug-in or element.

|-
|gst-launch-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-launch-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-launch] is a tool that builds	and runs basic GStreamer pipelines.
|-
|gst-play-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-play-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-play-1.0]  is	 a  command  line  tool	that can be used to test basic
playback	using the playbin element. You can pass	it  individual	files,      URIs  or	 whole directories (in which case it will recurse into sub-di-rectories as well).

|-
|gst-stats-1.0||
|-
|gst-typefind-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-typefind-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-typefind]  uses  the	GStreamer type finding system to determine the    relevant	GStreamer plugin to parse or decode file, and the  corresponding media type.
|-
|gtar||[https://www.freebsd.org/cgi/man.cgi?query=gtar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tar] - an	archiving utility

|-
|gtester||[https://www.freebsd.org/cgi/man.cgi?query=gtester&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gtester] is a utility to run unit	tests that have	been written using the
GLib test framework.
|-
|gtester-report||[https://www.freebsd.org/cgi/man.cgi?query=gtester-report&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gtester-report] is a script which	converts the XML output	generated by
gtester into HTML.
|-
|gtf||[https://www.freebsd.org/cgi/man.cgi?query=gtf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Gtf] is a	utility	for calculating	VESA GTF  modes.   Given  the  desired       horizontal  and	vertical resolutions and refresh rate (in Hz), the parameters	for a matching VESA GTF	mode are printed out.  Two output formats are	supported: mode	lines suitable for the Xorg xorg.conf(5) file,  and mode	parameters suitable for	the Linux fbset(8) utility.
|-
|gtk3-demo||
|-
|gtk3-demo-application||
|-
|gtk3-icon-browser||
|-
|gtk3-widget-factory||
|-
|gtk-builder-convert||
|-
|gtk-builder-tool||
|-
|gtk-demo||
|-
|gtk-encode-symbolic-svg||
|-
|gtk-launch||
|-
|gtk-query-immodules-2.0||
|-
|gtk-query-immodules-3.0||
|-
|gtk-query-settings||
|-
|gtk-update-icon-cache||
|-
|gtkhtml3-editor-test||
|-
|gucharmap||
|-
|guild||
|-
|guile||GNU  [https://www.freebsd.org/cgi/man.cgi?query=guile&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Guile] is an	implementation of the Scheme programming language.  It       extends the R5RS	and R6RS language standards, providing additional features necessary for real-world use.
|-
|guile-config||
|-
|guile-snarf||
|-
|gupnp-binding-tool-1.2||
|-
|gv2gml||[https://www.freebsd.org/cgi/man.cgi?query=gv2gml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gml2gv]  converts	 a graph specified in the GML format to	a graph	in the    GV (formerly DOT) format.  gv2gml converts a graph specified in the  GV      format to a graph in the	GML format.
|-
|gvcolor||[https://www.freebsd.org/cgi/man.cgi?query=gvcolor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvcolor] is  a  filter  that sets node colors from initial seed values.        Colors flow along edges from tail to head, and  are  averaged  (as  HSB      vectors)	 at nodes.  The	graph must already have	been processed by dot.       Appropriate choice of initial colors yields drawings in which node colors  help  to  emphasize	logical	relationships between nodes, even when       they are	spread far apart in the	layout.
|-
|gvfs-cat||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-cat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-cat]	concatenates the given files and prints	them to	the standard
output.
|-
|gvfs-copy||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-copy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-copy] copies	a file from SOURCE to DEST, or multiple	SOURCEs	to       DIRECTORY.    gvfs-copy is similar to the traditional cp utility, but using gvfs       locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.

|-
|gvfs-info||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-info] shows information about the given locations.      gvfs-info is similar to the traditional ls utility, but using gvfs       locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.

|-
|gvfs-less||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-less&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-less] executes less on the output of	gvfs-cat.
gvfs-less works just like the traditional less utility, but using gvfs    locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.
|-
|gvfs-ls||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-ls&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-ls] lists information about the given locations. If no location is
given, it defaults to the current directory.    gvfs-ls is similar to the traditional ls	utility, but using gvfs      locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.
|-
|gvfs-mime||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-mime&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-mime] can query information about applications that are registered
to handle a mime-type, or set the default handler for a mime-type.
|-
|gvfs-mkdir||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-mkdir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-mkdir] creates directories.
|-
|gvfs-monitor-dir||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-monitor-dir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-monitor-dir] - Monitor directories for changes; As long as gvfs-monitor-dir is running, it will print information about        file creation, deletion,	file content and attribute changes and mount       and unmount operations inside the specified directories.
|-
|gvfs-monitor-file||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-monitor-file&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-monitor-file] - Monitor files for changes
|-
|gvfs-mount||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-mount&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-mount] - Mounts the locations

|-
|gvfs-move||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-move&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-move] - Copy	files
|-
|gvfs-open||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-open&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-open] opens files with the default application that is registered        to handle files of this type.
|-
|gvfs-rename||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-rename&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-rename] is similar to the traditional rename	utility, but using
gvfs locations instead of local files: for example you can use     something like smb://server/resource/file.txt as	location.
|-
|gvfs-rm||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-rm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-rm] - Delete	files
|-
|gvfs-save||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-save&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-save] - Save	standard input

|-
|gvfs-set-attribute||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-set-attribute&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-set-attribute] - Set	file attributes
|-
|gvfs-trash||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-trash&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-trash] - Move files or directories to the trash
|-
|gvfs-tree||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-tree&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-tree] - List	contents of directories	in a tree-like format

|-
|gvgen||[https://www.freebsd.org/cgi/man.cgi?query=gvgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvgen] - generate	graphs

|-
|gvimtutor||
|-
|gvmap||[https://www.freebsd.org/cgi/man.cgi?query=gvmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvmap] takes as input a graph in DOT format,  finds  node	 clusters  and       produces	a rendering of the graph as a geographic-style map, with clusters highlighted	as countries, in xdot format.
|-
|gvmap.sh||[https://www.freebsd.org/cgi/man.cgi?query=gvmap.sh&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvmap.sh] - pipeline for running gvmap
|-
|gvpack||[https://www.freebsd.org/cgi/man.cgi?query=gvpack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvpack] reads in a stream	of graphs, combines the	graphs into  a	single  layout,	and  produces a	single graph serving as	the union of the input       graphs. The input graphs	must be	in dot format, and must	have all  necessary  layout  information. Acceptable input is	produced by applying a       Graphviz	layout program,	such as	dot or neato, with no -T flag.

|-
|gvpr||[https://www.freebsd.org/cgi/man.cgi?query=gvpr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvpr] (previously	known as gpr) is a graph  stream  editor  inspired  by     awk.  It	copies input graphs to its output, possibly transforming their       structure and attributes, creating new graphs,  or  printing  arbitrary       information.   The  graph  model	 is that provided by libcgraph(3).  In       particular, gvpr	reads and writes graphs	using the dot language.
|-
|gxl2gv||[https://www.freebsd.org/cgi/man.cgi?query=gxl2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gxl2gv]  converts	 between  graphs represented in	GXL and	in the GV language. Unless a conversion type is specified using a flag, gxl2gv  will   deduce  the  type  of  conversion  from the suffix of the input file, a      ".gv" suffix causing a conversion from GV to GXL, and a	".gxl"	suffix       causing	a  conversion from GXL to GV.  If no suffix is available, e.g.       when the	input is from a	pipe, and no flags are used  then  gxl2gv  assumes  the  type	 of  the  input	 file from its executable name so that      gxl2gv converts from GXL	to GV, and gv2gxl converts from	GV to GXL.
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content H===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|h2ph||[https://www.freebsd.org/cgi/man.cgi?query=h2ph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html h2ph] - convert .h C header files	to .ph Perl header files
|-
|h2xs||[https://www.freebsd.org/cgi/man.cgi?query=h2xs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html h2xs] - convert .h C header files	to Perl	extensions

|-
|hal-device||
|-
|hal-disable-polling||[https://www.freebsd.org/cgi/man.cgi?query=hal-disable-polling&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-disable-polling]  can	 be used to to disable and enable media	detection on drives with removable storage. For more information about  both      the  big	 picture  and  specific	 HAL properties, refer to the HAL spec       which can be found in  /usr/local/share/doc/hal/spec/hal-spec.html  depending on the distribution.
|-
|hal-find-by-capability||[https://www.freebsd.org/cgi/man.cgi?query=hal-find-by-capability&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-get-capability]  finds  device  object in the	HAL device database by    looking at device capabilities. For more	information about both the big       picture and specific HAL	properties, refer to the HAL spec which	can be       found in	/usr/local/share/doc/hal/spec/hal-spec.html depending  on  the       distribution.
|-
|hal-find-by-property||[https://www.freebsd.org/cgi/man.cgi?query=hal-find-by-property&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-get-property] finds	device	object	in  the	HAL device database by        looking at device properties. For more information about	both  the  big       picture and specific HAL	properties, refer to the HAL spec which	can be       found in	/usr/local/share/doc/hal/spec/hal-spec.html depending  on  the       distribution.
|-
|hal-get-property||[https://www.freebsd.org/cgi/man.cgi?query=hal-get-property&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-get-property] retrieves  a property from a device object in the HAL        device database.	For more information about both	the  big  picture  and      specific	 HAL  properties,  refer to the	HAL spec which can be found in       /usr/local/share/doc/hal/spec/hal-spec.html depending on	the  distribution.
|-
|hal-is-caller-locked-out||[https://www.freebsd.org/cgi/man.cgi?query=hal-is-caller-locked-out&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-is-caller-locked-out]	 determines if a specific caller is locked out       of a specific D-Bus interface on	a specific device. For	more  information  about  both the big picture and specific HAL properties, refer to    the HAL spec which can be found	in  /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.

|-
|hal-is-caller-privileged||[https://www.freebsd.org/cgi/man.cgi?query=hal-is-caller-privileged&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-is-caller-privileged] determines if a specific caller is privileged     for a given PolicyKit action on	given  device.	For  more  information       about  both  the	big picture, HAL and PolicyKit , refer to the HAL spec       (which can be found in /usr/local/share/doc/hal/spec/hal-spec.html  depending on the distribution) and	also the PolicyKit documentation.

|-
|hal-lock||[https://www.freebsd.org/cgi/man.cgi?query=hal-lock&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-lock] can be used to acquire a lock on a given interface either on a
given device or globally. For more information about both the big  picture and	the semantics of HAL locks, refer to the HAL spec which	can be    found in	/usr/local/share/doc/hal/spec/hal-spec.html depending  on  the       distribution.
|-
|hal-set-property||[https://www.freebsd.org/cgi/man.cgi?query=hal-set-property&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-set-property] sets  a property on a device object in	the HAL	device        database. For more information about both the big picture and  specific      HAL  properties,	 refer	to the HAL spec	which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
|-
|hb-ot-shape-closure||
|-
|hb-shape||
|-
|hb-subset||
|-
|hitori||
|-
|hmac256||This  is	 a  standalone	[https://www.freebsd.org/cgi/man.cgi?query=hmac256&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html HMAC-SHA-256] implementation used to compute an        HMAC-SHA-256 message authentication code.  The tool has originally been       developed  as  a	second implementation for Libgcrypt to allow comparing       against the primary implementation and to be used for internal  consistency  checks.	It  should  not	 be used for sensitive data because no       mechanisms to clear the stack etc are used.
|-
|hmaptool80||
|-
|hpftodit||[https://www.freebsd.org/cgi/man.cgi?query=hpftodit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hpftodit] creates	a font file for	 use  with  a  Hewlett-Packard	Laser-
Jet 4-series (or	newer) printer with groff -Tlj4, using data from an HP     tagged font metric (TFM)	file.  tfm_file	is the name of	the  TFM  file       for  the	 font;	Intellifont  and TrueType TFM files are	supported, but       symbol set TFM files are	not.  map_file is  a  file  giving  the	 groff       names  for  characters  in  the font;
|-
|httpcfg||[https://www.freebsd.org/cgi/man.cgi?query=httpcfg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html httpcfg] - Mono Certificate Management for HttpListener; This  tool  is used to manage the certificates used by the HttpListener       embeddable server class when the	HttpListener is	configured as an HTTPS       server instead of an HTTP server.

|-
|hunspell||[https://www.freebsd.org/cgi/man.cgi?query=hunspell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hunspell]	- spell	checker, stemmer and morphological analyzer
|-
|hunzip||[https://www.freebsd.org/cgi/man.cgi?query=hunzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  hunzip] -	decompress and decrypt hzip files to the standard output
|-
|hzip||[https://www.freebsd.org/cgi/man.cgi?query=hzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hunzip] is a small utility for text file compression and encryption, especially	for sorted dictionaries. "hunspell filename" creates the  compressed file "filename.hz" without removing the original	file.

|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content I===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|iagno||[https://www.freebsd.org/cgi/man.cgi?query=iagno&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Iagno] is	a two-player strategy game similar to Go.  The board is	8 by 8        with tiles that are black on one	side and white on the other side.  The       object  of  Iagno  is to	flip as	 many of your opponent's tiles to your       color as	possible without your opponent flipping	your tiles.   This  is       done  by	 trapping  your	opponent's tiles between two tiles of your own       color.
|-
|ibus||[https://www.freebsd.org/cgi/man.cgi?query=ibus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ibus]  is	 a command line	utility	which can restart or exit ibus-daemon,        get or set the current ibus engine or list the ibus engines.       Homepage: https://github.com/ibus/ibus/wiki
|-
|ibus-daemon||[https://www.freebsd.org/cgi/man.cgi?query=ibus-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ibus-daemon] is a	daemon program for ibus	and it is also a start up program for	users to activate ibus daemon, engines and panel.
|-
|ibus-setup||[https://www.freebsd.org/cgi/man.cgi?query=ibus-setup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ibus-setup] - configuration program for ibus

|-
|iccdump||
|-
|iccgamut||
|-
|icclu||
|-
|iconv||The [https://www.freebsd.org/cgi/man.cgi?query=iconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html iconv] utility converts	the codeset of file (or	from standard input if
no	file is	specified) from	codeset	from_name to codeset to_name and outputs the converted	text on	standard output.
|-
|icu-config||[https://www.freebsd.org/cgi/man.cgi?query=icu-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html icu-config] simplifies the task of building and linking against  ICU  as        compared	to manually configuring	user makefiles or equivalent.  Because       icu-config is an	executable script, it also solves the problem  of  locating  the  ICU	 libraries and headers,	by allowing the	system PATH to
locate it.
|-
|icuinfo||
|-
|identity||
|-
|idevice_id||[https://www.freebsd.org/cgi/man.cgi?query=idevice_id&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevice_id] - Prints device name or a list of attached devices.
|-
|idevicebackup||[https://www.freebsd.org/cgi/man.cgi?query=idevicebackup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicebackup] - Create or restore backup	for devices.
|-
|idevicebackup2||
|-
|idevicecrashreport||[https://www.freebsd.org/cgi/man.cgi?query=idevicecrashreport&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicecrashreport] - Retrieve crash reports from	a device.
|-
|idevicedate||[https://www.freebsd.org/cgi/man.cgi?query=idevicedate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicedate] - Display the current date or set it	on a device.
|-
|idevicedebug||[https://www.freebsd.org/cgi/man.cgi?query=idevicedebug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicedebug] - Interact with the	debugserver service of a device.
|-
|idevicedebugserverproxy||
|-
|idevicediagnostics||[https://www.freebsd.org/cgi/man.cgi?query=idevicediagnostics&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicediagnostics]  -  Interact with the	diagnostics interface of a device.
|-
|ideviceenterrecovery||[https://www.freebsd.org/cgi/man.cgi?query=ideviceenterrecovery&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceenterrecovery] - Make a device enter recovery mode.
|-
|ideviceimagemounter||[https://www.freebsd.org/cgi/man.cgi?query=ideviceimagemounter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceimagemounter] - Mount disk	images on the device.
|-
|ideviceinfo||[https://www.freebsd.org/cgi/man.cgi?query=ideviceinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceinfo] - Show information about the	first connected	device.
|-
|idevicename||[https://www.freebsd.org/cgi/man.cgi?query=idevicename&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicename] - Display the device	name or	set it to NAME if specified.
|-
|idevicenotificationproxy||[https://www.freebsd.org/cgi/man.cgi?query=idevicenotificationproxy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicenotificationproxy] - Post or observe notifications	on a device.

|-
|idevicepair||[https://www.freebsd.org/cgi/man.cgi?query=idevicepair&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicepair] - Manage host pairings with devices and usbmuxd.
|-
|ideviceprovision||[https://www.freebsd.org/cgi/man.cgi?query=ideviceprovision&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceprovision] - Manage provisioning profiles on a device.
|-
|idevicescreenshot||[https://www.freebsd.org/cgi/man.cgi?query=idevicescreenshot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicescreenshot] - Gets	a screenshot from the connected	device.
|-
|idevicesyslog||[https://www.freebsd.org/cgi/man.cgi?query=idevicesyslog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicesyslog] - Relay syslog of a connected device.
|-
|idle2.7||
|-
|idle3.6||
|-
|idle3.7||
|-
|idn||[https://www.freebsd.org/cgi/man.cgi?query=idn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idn] - Internationalized Domain Names command line tool; Internationalized Domain	Name (IDN) convert STRINGS, or standard	input.       Command line interface to the internationalized domain name library.
All strings are expected	to be encoded in the preferred charset used by       your locale.  Use `--debug' to find out what this charset is.  You  can       override	the charset used by setting environment	variable CHARSET.
To  process a string that starts	with `-', for example `-foo', use `--'       to signal the end of parameters,	as in `idn --quiet -a -- -foo'.
Mandatory arguments to long options are	mandatory  for	short  options       too.

|-
|idn2||
|-
|ifuse||[https://www.freebsd.org/cgi/man.cgi?query=ifuse&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ifuse] - Mount directories of an iOS device locally using	fuse. Mount  directories  of an iOS device locally using fuse.	By default the        media directory is mounted, options allow to  also  mount  the  sandbox       container  of  an  app,	an  app's  documents  folder  or even the root       filesystem on jailbroken	devices.
|-
|ikdasm||
|-
|ilasm||[https://www.freebsd.org/cgi/man.cgi?query=ilasm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ilasm] is	the Mono ILAsm assembler.  You can pass	one or more options to        drive the compiler, and a set of	source files.

|-
|illumread||
|-
|img2webp||
|-
|imgcmp||The  [https://www.freebsd.org/cgi/man.cgi?query=imgcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html imgcmp]  command  compares two images of the	same geometry with respect to	a given	metric.	 Please	use the	--help command line switch and       the JasPer Software Reference Manual for	more information.
|-
|imginfo||The  [https://www.freebsd.org/cgi/man.cgi?query=imginfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html imginfo]  command  displays information about an image.  Please use        the --help command line switch and the JasPer Software Reference	Manual       for more	information.

|-
|includeres||[https://www.freebsd.org/cgi/man.cgi?query=includeres&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Includeres]  includes  resources (fonts, procsets, patterns, files, etc)       in place	of %%IncludeResource comments in a  PostScript	document.  The       resources  are searched for in the current directory and	the system default directory under the resource name,	and with an appropriate	extension.
|-
|indexinfo||
|-
|indxbib||[https://www.freebsd.org/cgi/man.cgi?query=indxbib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html indxbib] - make inverted index for bibliographic databases
|-
|innochecksum||[https://www.freebsd.org/cgi/man.cgi?query=innochecksum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html innochecksum] prints checksums for InnoDB	files. This tool reads an        InnoDB tablespace file, calculates the checksum for each	page, compares      the calculated checksum to the stored checksum, and reports mismatches, which indicate damaged pages. It	was originally developed to speed up
verifying the integrity of tablespace files after power outages but can       also be used after file copies. Because checksum	mismatches will	cause       InnoDB to deliberately shut down	a running server, it can be preferable
to use this tool	rather than waiting for	a server in production usage       to encounter the	damaged	pages.
|-
|install-printerdriver||
|-
|installvst||
|-
|instmodsh||[https://www.freebsd.org/cgi/man.cgi?query=instmodsh&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html instmodsh] - A shell to examine installed	modules
|-
|invprofcheck||
|-
|ipers||
|-
|ipf-mod.pl||
|-
|ippfind||[https://www.freebsd.org/cgi/man.cgi?query=ippfind&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ippfind] - find internet printing	protocol printers
|-
|iproxy||
|-
|iptc||
|-
|irb26||
|-
|iso-info||[https://www.freebsd.org/cgi/man.cgi?query=iso-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html iso-info]	- shows	Information about an ISO 9660 image

|-
|iso-read||[https://www.freebsd.org/cgi/man.cgi?query=iso-read&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html iso-read]	- reads	portions of an ISO 9660	image
|-
|isodebug||[https://www.freebsd.org/cgi/man.cgi?query=isodebug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html isodebug] - print	genisoimage debug info from ISO-9660 image
|-
|isodump||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
|-
|isoinfo||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
|-
|isosurf||
|-
|isovfy||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
|-
|ispellaff2myspell||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content J===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|jasper||The [https://www.freebsd.org/cgi/man.cgi?query=jasper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jasper] command converts to and from JPEG-2000 files.
|-
|javavm||The [https://www.freebsd.org/cgi/man.cgi?query=javavm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Java VM] wrapper provides a convenient system for switching between      different Java VMs.  It also provides symbolic links in /usr/local/bin to   allow the use of the Java executables without having to add the specific     Java VM executable	directories to the PATH	environment variable.
|-
|jbgtopbm||[https://www.freebsd.org/cgi/man.cgi?query=jbgtopbm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jbgtopbm] - JBIG1	to portable bitmap file	converter

|-
|jbgtopbm85||
|-
|jbig2dec||[https://www.freebsd.org/cgi/man.cgi?query=jbig2dec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jbig2dec]	- File format converter	specialized in JBIG2 decoding
|-
|jiv||The [https://www.freebsd.org/cgi/man.cgi?query=jiv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jiv] command displays	a JPEG-2000 image on an	X display. Use the arrow keys	for scrolling and < and	> for zooming.	Please use the	--help       command	line  switch and the JasPer Software Reference Manual for more       information.
|-
|jmtpfs||
|-
|jpegicc||[https://www.freebsd.org/cgi/man.cgi?query=jpegicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jpegicc] - little	cms ICC	profile	applier	for JPEG.

|-
|jpegtran||[https://www.freebsd.org/cgi/man.cgi?query=jpegtran&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jpegtran]	performs various useful	transformations	of JPEG	files.	It can
translate the coded representation from one variant of JPEG to another,    for  example  from baseline JPEG	to progressive JPEG or vice versa.  It       can also	perform	some rearrangements of the  image  data,  for  example
turning an image	from landscape to portrait format by rotation.
|-
|jpgicc||[https://www.freebsd.org/cgi/man.cgi?query=jpgicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jpgicc] -	little cms ICC profile applier for JPEG.

|-
|js24||
|-
|js24-config||
|-
|js52||
|-
|js52-config||
|-
|js60||
|-
|js60-config||
|-
|json_pp||[https://www.freebsd.org/cgi/man.cgi?query=json_pp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html json_pp] converts	between	some input and output formats (one of them is
JSON).  This program was	copied from json_xs and	modified.
|-
|json_reformat||
|-
|json_verify||
|-
|json-glib-format||
|-
|json-glib-validate||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content K===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|kactivities-cli||
|-
|katalyzer||[https://www.freebsd.org/cgi/man.cgi?query=katalyzer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html katalyzer] analyzes Kate streams and displays  information  about	 them.
The  type  of  information to select is selectable on the command line.        Several multiplexed Kate	streams	may be analyzed	at the same time.
|-
|kate||[https://www.freebsd.org/cgi/man.cgi?query=kate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kate] - Advanced text editor for KDE
|-
|kate-syntax-highlighter||
|-
|katedec||[https://www.freebsd.org/cgi/man.cgi?query=katedec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html katedec] - decodes Kate streams to a textual description
|-
|kateenc||[https://www.freebsd.org/cgi/man.cgi?query=kateenc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kateenc] - create	Kate streams from text input
|-
|kbuildsycoca5||[https://www.freebsd.org/cgi/man.cgi?query=kbuildsycoca5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kbuildsycoca5] - Rebuilds	the KService desktop file system configuration
cache.
|-
|kbxutil||
|-
|kcookiejar5||[https://www.freebsd.org/cgi/man.cgi?query=kcookiejar5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kcookiejar5] is a	command	line interface to the HTTP cookie store	used
by KDE, a D-BUS service to store/retrieve/clean cookies.

|-
|kdebugdialog5||
|-
|kded5||[https://www.freebsd.org/cgi/man.cgi?query=kded5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kded5] consolidates several small	services in one	process. These are     mostly D-Bus services provided by KDED modules, but it also manages       sycoca (a binary	cache of servicetypes, mimetypes and services used by       KService) and KConfig update scripts as needed.
|-
|kdeinit5||[https://www.freebsd.org/cgi/man.cgi?query=kdeinit5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kdeinit5] is a process launcher somewhat similar to the famous init used
for booting UNIX. It executes KDE programs and kdeinit loadable modules       (KLMs) starting them more efficiently.
|-
|kdeinit5_shutdown||
|-
|kdeinit5_wrapper||[https://github.com/KDE/kinit/blob/master/docs/wrapper.txt kdeinit5_wrapper, kshell5 and kwrapper5] are programs thatstart programs via kdeinit.
|-
|key2raw||
|-
|key2text||
|-
|key2xhtml||
|-
|kf5-config||[https://www.freebsd.org/cgi/man.cgi?query=kf5-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kf5-config] is a command line program used to retrieve information about
Frameworks installation or user paths.
|-
|kgendesignerplugin||[https://www.freebsd.org/cgi/man.cgi?query=kgendesignerplugin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kgendesignerplugin] - Generates widget plugins for Qt(TM)	Designer.
|-
|kglobalaccel5||
|-
|kiconfinder5||
|-
|kile||[https://kile.sourceforge.io/ Kile] - an Integrated LaTeX Editing Environment
|-
|kjs5||[https://www.freebsd.org/cgi/man.cgi?query=kjs5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kjs5] - KDE ECMAScript compatible	interpreter

|-
|kodak2ti3||
|-
|kpackagelauncherqml||
|-
|kpackagetool5||[https://www.freebsd.org/cgi/man.cgi?query=kpackagetool5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kpackagetool5] - Install,	list, remove Plasma packages
|-
|kpat||[https://games.kde.org/game.php?game=kpat KPat] (aka KPatience) is a relaxing card sorting game. To win the game a player has to arrange a single deck of cards in certain order amongst each other. 
|-
|kquitapp5||
|-
|kreadconfig5||
|-
|ksba-config||
|-
|ksh93||[https://www.freebsd.org/cgi/man.cgi?query=ksh93&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ksh,  rksh,  pfksh]  - KornShell,	a standard/restricted command and programming	language
|-
|kshell5||[https://github.com/KDE/kinit/blob/master/docs/wrapper.txt kdeinit5_wrapper, kshell5 and kwrapper5] are programs thatstart programs via kdeinit.
|-
|ktelnetservice5||
|-
|ktrash5||
|-
|kwallet-query||[https://www.freebsd.org/cgi/man.cgi?query=kwallet-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kwallet-query] comes in handy when shell scripts need to read or update
the KDE Wallet. It works	by manipulating	the entries displayed in the KDE Wallet Manager utility. It's	only parameter is the walletname the  tool should read	or update. The operation mode is specified by the     options.
|-
|kwalletd5||
|-
|kwrapper5||[https://github.com/KDE/kinit/blob/master/docs/wrapper.txt kdeinit5_wrapper, kshell5 and kwrapper5] are programs thatstart programs via kdeinit.
|-
|kwrite||[https://kde.org/applications/utilities/org.kde.kwrite KWrite] is a text editor by KDE, based on the Kate's editor component. 
|-
|kwriteconfig5||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content L===
{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|lame||[https://www.freshports.org/audio/lame lame] Fast MP3 encoder kit
|-
|lc||[https://www.freebsd.org/cgi/man.cgi?query=lc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lc] tool is a license compiler for Mono. It's  used  to  convert	a  licenses.licx file	to a resource that can be embedded into	an executable.
|-
|ld||[https://www.freebsd.org/cgi/man.cgi?query=ld.bfd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ld] combines a number of object and archive files, relocates their data       and ties	up symbol references. Usually the last step in compiling a      program is to run ld.

|-
|ld.bfd||
|-
|ld.gold||
|-
|ld.lld80||
|-
|ld64.lld80||
|-
|ldapcompare||[https://www.freebsd.org/cgi/man.cgi?query=ldapcompare&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapcompare] opens a connection to an LDAP server, binds,	and performs a
compare using specified parameters. 
|-
|ldapdelete||[https://www.freebsd.org/cgi/man.cgi?query=ldapdelete&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapdelete] - LDAP delete	entry tool
|-
|ldapexop||[https://www.freebsd.org/cgi/man.cgi?query=ldapexop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapexop]	- issue	LDAP extended operations
|-
|ldapmodify||[https://www.freebsd.org/cgi/man.cgi?query=ldapmodify&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapmodify, ldapadd] - LDAP modify entry and LDAP	add entry tools
|-
|ldapmodrdn||[https://www.freebsd.org/cgi/man.cgi?query=ldapmodrdn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapmodrdn] - LDAP rename	entry tool
|-
|ldappasswd||[https://www.freebsd.org/cgi/man.cgi?query=ldappasswd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldappasswd] - change the password	of an LDAP entry
|-
|ldapsearch||[https://www.freebsd.org/cgi/man.cgi?query=ldapsearch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapsearch] - LDAP search	tool
|-
|ldapurl||[https://www.freebsd.org/cgi/man.cgi?query=ldapurl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapurl] extracts the components	of the     ldapuri	option argument
|-
|ldapwhoami||[https://www.freebsd.org/cgi/man.cgi?query=ldapwhoami&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapwhoami]  opens a connection to an LDAP server, binds,	and performs a
whoami operation.

|-
|lefty||[https://www.freebsd.org/cgi/man.cgi?query=lefty&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lefty] is	a two-view graphics editor for technical pictures.
|-
|libart2-config||
|-
|libassuan-config||
|-
|libevdev-tweak-device||
|-
|libgcrypt-config||
|-
|libgtop_daemon2||
|-
|libgtop_server2||
|-
|libIDL-config-2||
|-
|libinput||[https://www.freebsd.org/cgi/man.cgi?query=libinput&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libinput]	- libinput-based X.Org input driver

|-
|libnetcfg||The [https://www.freebsd.org/cgi/man.cgi?query=libnetcfg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libnetcfg] utility can be used to configure the libnet.  Starting     from perl 5.8 libnet is part of the standard Perl distribution, but the       libnetcfg can be	used for any libnet installation.

|-
|libpng16-config||[https://www.freebsd.org/cgi/man.cgi?query=libpng&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libpng] -	Portable Network Graphics (PNG)	Reference Library 1.6.29

|-
|libwacom-list-local-devices||
|-
|libwmf-config||
|-
|libwmf-fontmap||
|-
|lightsoff||
|-
|linc-cleanup-sockets||
|-
|line||[https://www.freebsd.org/cgi/man.cgi?query=line&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html line]  tries  to	determine  the cache line size in bytes	of the largest       cache which is smaller than len bytes.
|-
|line-clip||
|-
|line-cull||
|-
|line-flat||
|-
|line-smooth||
|-
|line-stipple-wide||
|-
|line-userclip||
|-
|line-userclip-clip||
|-
|line-userclip-nop||
|-
|line-userclip-nop-clip||
|-
|line-wide||
|-
|line-xor||
|-
|lineloop||
|-
|lineloop-clip||
|-
|lineloop-elts||
|-
|linestrip||
|-
|linestrip-clip||
|-
|linestrip-flat-stipple||
|-
|linestrip-stipple||
|-
|linestrip-stipple-wide||
|-
|linkicc||[https://www.freebsd.org/cgi/man.cgi?query=linkicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html linkicc] - little	cms device link	generator.

|-
|linktest||
|-
|listbasic||[https://www.freebsd.org/cgi/man.cgi?query=listbasic&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html listbasic]  extracts  the	 BASIC	listing	from a ZX Spectrum snapshot or
tape file and prints it to standard output.
|-
|lit2epub||

|-
|lit80||
|-
|live555HLSProxy||
|-
|live555MediaServer||
|-
|live555ProxyServer||
|-
|lkbib||[https://www.freebsd.org/cgi/man.cgi?query=lkbib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lkbib] - search bibliographic databases
|-
|lklfuse||
|-
|llc80||
|-
|lld80||
|-
|lld-link80||
|-
|lldb80||
|-
|lldb-argdumper80||
|-
|lldb-mi80||
|-
|lldb-server80||
|-
|lldb-test80||
|-
|lldb-vscode80||
|-
|lli80||
|-
|llvm-ar80||
|-
|llvm-as80||
|-
|llvm-bcanalyzer80||
|-
|llvm-cat80||
|-
|llvm-cfi-verify80||
|-
|llvm-config80||
|-
|llvm-cov80||
|-
|llvm-cvtres80||
|-
|llvm-cxxmap80||
|-
|llvm-diff80||
|-
|llvm-dis80||
|-
|llvm-dlltool80||
|-
|llvm-dwarfdump80||
|-
|llvm-dwp80||
|-
|llvm-elfabi80||
|-
|llvm-exegesis80||
|-
|llvm-extract80||
|-
|llvm-link80||
|-
|llvm-lit80||
|-
|llvm-mc80||
|-
|llvm-mca80||
|-
|llvm-modextract80||
|-
|llvm-mt80||
|-
|llvm-nm80||
|-
|llvm-objcopy80||
|-
|llvm-objdump80||
|-
|llvm-opt-report80||
|-
|llvm-pdbutil80||
|-
|llvm-profdata80||
|-
|llvm-ranlib80||
|-
|llvm-rc80||
|-
|llvm-readelf80||
|-
|llvm-readobj80||
|-
|llvm-rtdyld80||
|-
|llvm-size80||
|-
|llvm-split80||
|-
|llvm-stress80||
|-
|llvm-strings80||
|-
|llvm-strip80||
|-
|llvm-symbolizer80||
|-
|llvm-tblgen80||
|-
|llvm-undname80||
|-
|llvm-xray80||
|-
|lneato||[https://www.freebsd.org/cgi/man.cgi?query=lneato&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lneato] -	A Customizable Graph Editor
|-
|lobase||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|localc||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|locktest||[https://www.freebsd.org/cgi/man.cgi?query=locktest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html locktest]	- Find differences in locking between two SMB servers
|-
|lodbias||
|-
|lodraw||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|loffice||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|lofromtemplate||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|loimpress||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|bin/lomath||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|long-fixed-func||
|-
|lookbib||[https://www.freebsd.org/cgi/man.cgi?query=lookbib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lookbib] - search	bibliographic databases

|-
|loweb||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|lowntfs-3g||[https://linux.die.net/man/8/mount.lowntfs-3g ntfs-3g] - Third Generation Read/Write NTFS Driver 
|-
|lowriter||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
|-
|lp||[https://www.freebsd.org/cgi/man.cgi?query=lp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lp]	-- front-end to	the print spooler
|-
|lp_solve||
|-
|lpoptions||[https://www.freebsd.org/cgi/man.cgi?query=lpoptions&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpoptions] - display or set printer options and defaults
|-
|lpq||[https://www.freebsd.org/cgi/man.cgi?query=lpq&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpq] -- spool queue	examination program
|-
|lpr||[https://www.freebsd.org/cgi/man.cgi?query=lpr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpr] -- off	line print
|-
|lprm||[https://www.freebsd.org/cgi/man.cgi?query=lprm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lprm] -- remove jobs from the line printer spooling	queue
|-
|lprsetup.sh||
|-
|lpstat||[https://www.freebsd.org/cgi/man.cgi?query=lpstat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpstat] -	compatibility program to get information about printers
|-
|ls2ti3||
|-
|lsattr||[https://www.freebsd.org/cgi/man.cgi?query=lsattr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lsattr] -	list file attributes on	a Linux	second extended	file system
|-
|lshal||[https://www.freebsd.org/cgi/man.cgi?query=lshal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lshal] - list HAL	devices
|-
|lua52||[https://www.freebsd.org/cgi/man.cgi?query=lua52&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lua]  is the standalone Lua interpreter.	It loads and executes Lua programs, either in	textual	source form or	in  precompiled	 binary	 form.       (Precompiled  binaries  are output by luac, the Lua compiler.)  lua can       be used as a batch interpreter and also interactively.
|-
|luac52||[https://www.freebsd.org/cgi/man.cgi?query=luac52&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html luac]  is	 the  Lua compiler.  It	translates programs written in the Lua   programming language into binary	files  containing  precompiled	chunks       that can	be later loaded	and executed.
|-
|lz4||[https://www.freebsd.org/cgi/man.cgi?query=lz4&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lz4 - lz4, unlz4, lz4cat] - Compress or decompress .lz4 files
|-
|lz4_decompress||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content M===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|macpack||[https://www.freebsd.org/cgi/man.cgi?query=macpack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html macpack] - Macintosh OS X	Packager for managed gui assemblies
|-
|make_pysol_freecell_board.py||
|-
|makealias||
|-
|makecert||[https://www.freebsd.org/cgi/man.cgi?query=makecert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MakeCert] - Create X.509 certificates for	test purposes

|-
|makeconv||[https://www.freebsd.org/cgi/man.cgi?query=makeconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html makeconv]	converts the ICU converter table convertertable	into a	binary file.  The binary file has the same base	name as	convertertable but has       a .cnv extension	(instead of the	typical	.ucm extension of the convertertable	file).	 This binary file can then be read directly by ICU, or
used by pkgdata(1) for incorporation into a larger archive or library.
|-
|makemhr||
|-
|makepqg||
|-
|mandelbrot||
|-
|mangle||
|-
|manywin||
|-
|marco||[https://www.freebsd.org/cgi/man.cgi?query=marco&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Marco]  is  a minimal X window manager that uses GTK+ for	drawing	window       frames. It is aimed at non-technical users and is designed to integrate       well  with  the	MATE  desktop. Marco is	a plain	window manager for the       adult in	you; Many window managers are like  Marshmallow	 Froot	Loops,       Marco  is like Cheerios.	It lacks some features that may	be expected by       traditional UNIX	or other technical users; these	users may want to  investigate  other	 available  window  managers for use with MATE or as a
standalone window manager.
|-
|marco-message||The [https://www.freebsd.org/cgi/man.cgi?query=marco-message&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html marco-message] command is used to perform some simple	window manager
tasks while Marco is running.

|-
|marco-theme-viewer||[https://www.freebsd.org/cgi/man.cgi?query=marco-theme-viewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html marco-theme-viewer] allows you to	preview	any installed Marco theme.  When  designing	a  new	Marco theme, you can use marco-theme-viewer to       benchmark the performance of a window frame, and	to preview  it	around       different types of windows in various mock scenarios.

|-
|marco-window-demo||[https://www.freebsd.org/cgi/man.cgi?query=marco-window-demo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html marco-window-demo - demo]	of window features
This program demonstrates various kinds of windows that window managers   and window manager themes should handle.
Be sure to tear off the menu and	toolbar, those are also	a special kind       of window.
|-
|markdown||[https://www.freebsd.org/cgi/man.cgi?query=markdown&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html markdown] -- text to html conversion tool
|-
|markdown_py-2.7||
|-
|masktest||[https://www.freebsd.org/cgi/man.cgi?query=masktest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html masktest] - Find differences in wildcard matching	between	Samba's
implementation and that of a remote server.
|-
|mate-about||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-about&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-about program] is a tool to learn more about MATE and who creates MATE. It contains an introduction about the	project, and lists all     contributors.
|-
|mate-about-me||[https://www.freebsd.org/cgi/man.cgi?query=mate-about-me&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-about-me] --	is a control center applet.
|-
|mate-appearance-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-appearance-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-appearance-properties] -- is	a control center applet.
|-
|mate-at-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-at-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-at-properties] - configure MATE Assistive Technologies

|-
|mate-calc||
|-
|mate-calc-cmd||
|-
|mate-color-select||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-color-select&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-color-select]  program	is a tool to pick a color from a color       palette or from screen. It is not meant to be used on its own, but as a       MATE Desktop helper application.

|-
|mate-control-center||[https://www.freebsd.org/cgi/man.cgi?query=mate-control-center&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-control-center] is a	graphical user interface to configure various        aspects of MATE.       When run	without	arguments, the shell displays the control center       overview, which shows all available configuration panels. The overview       allows one to open individual panels by clicking	on them. It also has a       search entry to find panels by searching	keywords.

|-
|mate-default-applications-properties||
|-
|mate-desktop-item-edit||[https://www.freebsd.org/cgi/man.cgi?query=mate-desktop-item-edit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-desktop-item-edit] -	A small	tool to	edit .desktop files.
|-
|mate-dictionary||[https://www.freebsd.org/cgi/man.cgi?query=mate-dictionary&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-dictionary] - Look up words on dictionaries
|-
|mate-disk-usage-analyzer||[https://www.freebsd.org/cgi/man.cgi?query=mate-disk-usage-analyzer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html baobab] is able to scan either specific folders or the whole filesystem        (local and remote), in order to give the	user a graphical tree representation including each	directory size or percentage in	the branch.       It also auto-detects in real-time any change made to your home directory as far as any mounted/unmounted device. A graphical	treemap	window       is also provided	for any	selected folder.
|-
|mate-display-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-display-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-display-properties] - customize MATE	display	behavor

|-
|mate-font-viewer||[https://www.freebsd.org/cgi/man.cgi?query=mate-font-viewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-font-viewer] - preview fonts
|-
|mate-keybinding-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-keybinding-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-keybinding-properties] - configure MATE keybindings;  This  executable	is part	of the package 'mate-control-center': The MATE       Control Center.
The MATE	 keybindings preference	tool enables you to  display  the  default keyboard shortcuts	and customize them to your requirements.   You  can	 also  create  hot keys. Hot keys  are keyboard	shortcuts that       start applications or perform other useful actions.
|-
|mate-keyboard-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-keyboard-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-keyboard-properties] - manage keyboard behaviour in MATE; This  executable	is part	of the package 'mate-control-center': The MATE       Control Center.
Keyboard	Preferences manages all	settings related to the	keyboard in  a       MATE environment. This includes key repeat delay, cursor	blinking, lay outs and	layout options.	You can	also configure a  typing  break	 which
locks the screen	and enforces a break from work.
|-
|mate-mouse-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-mouse-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-mouse-properties] - configure MATE mouse preferences
|-
|mate-network-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-network-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-network-properties] - configure MATE	network	proxy
|-
|mate-notification-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-notification-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-notification-properties] - Set up the options for desktop notifications
|-
|mate-panel||The [https://www.freebsd.org/cgi/man.cgi?query=mate-panel&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-panel program] provides the panels for the the MATE Desktop Environment. It is	the area on your desktop from which you	can run	applications	and  applets, and perform other	tasks. New applets may also be   installed, added	to, or removed from the	panels.
By default, mate-panel typically	creates	a panel	 on  the  top  of  the       screen  with  applets such as a Menu Bar, Notification Area, and	Clock;      While creating a	second panel on	the bottom of the screen with a	Window      List  and  a  Workspace Switcher. Panels	can be created,	deleted, moved      around the desktop, and to other	monitors.
|-
|mate-panel-test-applets||[https://www.freebsd.org/cgi/man.cgi?query=mate-panel-test-applets&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-panel-test-applets]	display	 installed applets in a	dialog box and        allow you to test them.

|-
|mate-power-manager||
|-
|mate-power-preferences||
|-
|mate-power-statistics||
|-
|mate-screensaver||[https://www.freebsd.org/cgi/man.cgi?query=mate-screensaver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE  Screensaver]  is  the default screen saver and locker for the MATE       Desktop.	It is designed with simplicity and  security  in  mind.	 matescreensaver integrates well with	the MATE desktop, and it supports User       Switching and the ability to lock down configuration settings.
|-
|mate-screensaver-command||[https://www.freebsd.org/cgi/man.cgi?query=mate-screensaver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE  Screensaver]  is  the default screen saver and locker for the MATE       Desktop.	It is designed with simplicity and  security  in  mind.	 matescreensaver integrates well with	the MATE desktop, and it supports User       Switching and the ability to lock down configuration settings.
|-
|mate-screensaver-preferences||[https://www.freebsd.org/cgi/man.cgi?query=mate-screensaver-preferences&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-screensaver-preferences] - Configure	MATE Screensaver
|-
|mate-screenshot||[https://www.freebsd.org/cgi/man.cgi?query=mate-screenshot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-screenshot] - capture the screen, a window, or an user-defined area
and save	the snapshot image to a	file.
|-
|mate-search-tool||[https://www.freebsd.org/cgi/man.cgi?query=mate-search-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE Search Tool] is a utility for finding files on your system. To perform  a	basic  search,	you can	type a filename	or a partial filename,      with or without wildcards. To refine your search, you can  apply	 additional search options.

|-
|mate-session||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-session&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session]  program starts up the	MATE desktop environment. This        command is typically executed by	your Login/Display Manager (like  GDM,       LXDM, XDM, SLiM,	or from	your X startup scripts like .xinitrc). It will       load either your	saved session, or it will provide  a  default  session
for  the	 user  as  defined by the system administrator (or the default       MATE installation on your system).
|-
|mate-session-inhibit||[https://www.freebsd.org/cgi/man.cgi?query=mate-session-inhibit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session-inhibit] can	inhibit	certain	matesession functionality       while executing the given COMMAND. To achieve this, it calls the       Inhibit() method	of the mate-session D-Bus API and creates an  inhibitor. The inhibitor	is automatically removed when       mate-session-inhibit exits.

|-
|mate-session-properties||The [https://www.freebsd.org/cgi/man.cgi?query=mate-session-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session-properties] program enables the users to	configure what  applications should be started on login,	in  addition  to  the  default       startup applications configured on the system.
|-
|mate-session-save||The [https://www.freebsd.org/cgi/man.cgi?query=mate-session-save&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session-save] program can be used from a	MATE session to	either       end  the	 current MATE session or save a	snapshot of the	currently running applications (but not both). This session will be  later  restored  at your next MATE session.
|-
|mate-system-log||[https://www.freebsd.org/cgi/man.cgi?query=mate-system-log&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE System Log Viewer] is a simple utility to display system log	files.
|-
|mate-system-monitor||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-system-monitor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-system-monitor] allows	 you to	view and control the processes       running on your system. You can access detailed memory maps, send  signals, and terminate the processes.
|-
|mate-terminal||[https://www.freebsd.org/cgi/man.cgi?query=mate-terminal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-terminal] - manual page for MATE Terminal Emulator
|-
|mate-terminal.wrapper||
|-
|mate-thumbnail-font||[https://www.freebsd.org/cgi/man.cgi?query=mate-thumbnail-font&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-thumbnail-font] is a	command-line tool for creating	thumbnails  of      PCF fonts.
|-
|mate-typing-monitor||[https://www.freebsd.org/cgi/man.cgi?query=mate-typing-monitor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-typing-monitor] - configure MATE network proxy
This  executable	is part	of the package 'mate-control-center': The MATE    Control Center.
If you use too much computer you	may be risking your health.  Use  this       tool  for  reminding yourself to	take little (typing) breaks in regular     intervals.
|-
|mate-volume-control||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-volume-control&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE Volume	Control] application is an audio	mixer that enables you    to mix audio and	adjust volume levels of	various	audio mixer devices on       your system.
|-
|mate-volume-control-status-icon||
|-
|mate-window-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-window-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-window-properties] -	configure MATE network proxy
|-
|mate-wm||[https://www.freebsd.org/cgi/man.cgi?query=mate-wm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-wm] - Start the window manager configured by	the user
|-
|mautil||The [https://www.freebsd.org/cgi/man.cgi?query=mautil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mautil] tool works with Mono.Addins repositories and packages.
|-
|mconfig||[https://www.freebsd.org/cgi/man.cgi?query=mconfig&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mconfig] can  be	used to	edit .NET configuration	files, by adding "features" (that is sets of xml statements) defined in one  of  the	config       files  read  by mconfig.	The config file	can also define	layouts	of default configuration files, which	may be useful for  bootstrapping  your
.NET projects.
|-
|mcs||[https://www.freebsd.org/cgi/man.cgi?query=mcs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mcs] is the Mono C# compiler, an implementation of the ECMA-334 language specification.  You can pass one	or more	options	to drive the compiler,  and  a set of source files.  Extra options or arguments can be provided    in a response file.  Response files are referenced by prepending	the  @     symbol to the response file name.

|-
|mdassembler||[https://www.freebsd.org/cgi/man.cgi?query=mdassembler+%09&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdassembler] - Compile documentation for use in monodoc browser

|-
|mdb_copy||The [https://www.freebsd.org/cgi/man.cgi?query=mdb_copy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_copy] utility copies an LMDB environment. The environment can be       copied regardless of whether it is currently in use.   No  lockfile  is       created,	since it gets recreated	at need.
|-
|mdb_dump||The  [https://www.freebsd.org/cgi/man.cgi?query=mdb_dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_dump] utility  reads a database	and writes its contents	to the
standard	output using a portable	flat-text  format  understood  by  the        [https://www.freebsd.org/cgi/man.cgi?query=mdb_load&apropos=0&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_load(1)] utility.
|-
|mdb_load||[https://www.freebsd.org/cgi/man.cgi?query=mdb_load&apropos=0&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html The  mdb_load]  utility  reads from the standard input and loads it into
the LMDB	environment envpath.
|-
|mdb_stat||The [https://www.freebsd.org/cgi/man.cgi?query=mdb_stat&apropos=0&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_stat] utility displays the status	of an LMDB environment.

|-
|mdbrebase||
|-
|mdoc||[https://www.freebsd.org/cgi/man.cgi?query=mdoc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc] - Mono documentation management tool
|-
|mdoc-assemble||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-assemble&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc  assemble]  creates	.tree and .zip files from PATHS	for use	in the
monodoc(1) documentation	browser.

|-
|mdoc-export-html||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-export-html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc export-html] creates	HTML files from	the mdoc(5)-formatted documentation XML files	within DIRECTORIES.
|-
|mdoc-export-msxdoc||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-export-msxdoc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc  export-msxdoc] creates Microsoft XML Documentation (as produced by        csc /doc) from the mdoc(5)-formatted documentation XML files within DIRECTORIES.
|-
|mdoc-update||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-update&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc update] is responsible for the following:
* Creating documentation stubs based on ASSEMBLIES.	 The stub-creation process will create	new mdoc(5) XML	files  for  each  type  within ASSEMBLIES, and provide documentation stubs for each member of those types.
* Update  documentation  stubs  based  on  ASSEMBLIES.    Existing    mdoc(5)  documentation  can be updated to	reflect	changes	within      ASSEMBLIES, such as added	types and  members,  while  preserving    existing documentation.
In some limited circumstances, renames will be tracked, minimizing the documentation burden when	e.g. a parameter is renamed.
|-
|mdoc-validate||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc validate] - Validate	XML documents against a	schema
|-
|mdvalidater||[https://www.freebsd.org/cgi/man.cgi?query=mdvalidater&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdvalidator] has been obsoleted by mdoc(1).   See	 the  [https://www.freebsd.org/cgi/man.cgi?query=mdoc-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc-validate(1)]     man page.

|-
|meinproc5||[https://www.freebsd.org/cgi/man.cgi?query=meinproc5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html meinproc5] - KDE translator for XML
|-
|metacity||[https://www.freebsd.org/cgi/man.cgi?query=metacity&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html METACITY] - minimal GTK3 Window Manager
|-
|metacity-message||[https://www.freebsd.org/cgi/man.cgi?query=metacity-message&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html METACITY-MESSAGE] - a command to send a message to Metacity
|-
|metacity-theme-viewer||[https://www.freebsd.org/cgi/man.cgi?query=metacity-theme-viewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html metacity-theme-viewer]  allows  you  to  preview	any installed Metacity        theme.
|-
|metacity-window-demo||[https://www.freebsd.org/cgi/man.cgi?query=metacity-window-demo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html metacity-window-demo] - demo of window features

|-
|metaflac||[https://www.freebsd.org/cgi/man.cgi?query=metaflac&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html metaflac]	 -  program  to	 list, add, remove, or edit metadata in	one or
more FLAC files.

|-
|mhddfs||[https://www.freebsd.org/cgi/man.cgi?query=mhddfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mhddfs]  -  The  driver  combines	a several mount	points into the	single      one.
|-
|mib2c||The [https://www.freebsd.org/cgi/man.cgi?query=mib2c&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mib2c] tool is designed to take a portion of the MIB	tree  (as  defined  by a MIB file) and generate the template C code necessary	to implement the relevant management objects within it.
|-
|mib2c-update||Use [https://www.freebsd.org/cgi/man.cgi?query=mib2c-update&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mib2c-update]  to  generate	your mib2c code	templates, and it will        track the original code and the changes you make	to the	code.  If  the       mib2c template changes (bug fixes, enhances in later releases), re-running mib2c will update the template and then attempt to	re-apply  your
changes.
|-
|midicat||The [https://www.freebsd.org/cgi/man.cgi?query=midicat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html midicat] utility receives MIDI data from the given input MIDI port      and/or sends it to	the given output MIDI port. 
|-
|mikeyParse||
|-
|miniunzip||[https://www.freebsd.org/cgi/man.cgi?query=miniunzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html minizip] is a simple tool	which allows the extraction of compressed file
archives	in the ZIP format used by the MS-DOS utility  PKZIP.   It  was       written	as  a  demonstration of	the zlib(3) library and	therefore lack       many of the features of the unzip(1) program.
|-
|minizip||[https://www.freebsd.org/cgi/man.cgi?query=miniunzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html minizip] is a simple tool	which allows the extraction of compressed file
archives	in the ZIP format used by the MS-DOS utility  PKZIP.   It  was       written	as  a  demonstration of	the zlib(3) library and	therefore lack       many of the features of the unzip(1) program.
|-
|mk_cmds||[https://www.freebsd.org/cgi/man.cgi?query=mk_cmds&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Mk_cmds] converts	a table	listing	command	names and associated help messages into a C source file suitable for use with	the ss(3) library.
|-
|mkbundle||[https://www.freebsd.org/cgi/man.cgi?query=mkbundle&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkbundle] generates  an	executable  program  that  will	contain	static
copies of the assemblies	listed on the command line.  By	 default  only       the  assemblies	specified  in the command line will be included	in the       bundle.	To automatically include all of	the  dependencies  referenced,       use the "--deps"	command	line option.
|-
|mkfontdir||[https://www.freebsd.org/cgi/man.cgi?query=mkfontdir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkfontdir] - create an index of X	font files in a	directory

|-
|mkfontscale||[https://www.freebsd.org/cgi/man.cgi?query=mkfontscale&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkfontscale] - create an index of	scalable font files for	X
|-
|mkisofs||[https://www.freebsd.org/cgi/man.cgi?query=mkisofs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkisofs] -  create  an  hybrid ISO-9660/JOLIET/HFS/UDF filesystem-image
with optional Rock Ridge	attributes.
|-
|mm2gv||[https://www.freebsd.org/cgi/man.cgi?query=mm2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mm2gv]  converts	a sparse matrix	of the Matrix Market format to a graph      in the GV (formerly DOT)	format
|-
|mmc-tool||
|-
|mmroff||[https://www.freebsd.org/cgi/man.cgi?query=mmroff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mmroff]  is  a  simple  preprocessor for groff, it is used for expanding       references in mm, see groff_mm(7).  groff is executed twice, first with       -z  and	-rRef=1	to collect all references and then to do the real processing when the	reference file is up to	date.
|-
|mod||
|-
|modularize80||
|-
|modutil||
|-
|mono-api-html||
|-
|mono-api-info||[https://www.freebsd.org/cgi/man.cgi?query=mono-api-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-api-info] - Expose IL structure of CLR assemblies as	XML.

|-
|mono-boehm||
|-
|mono-cil-strip||[https://www.freebsd.org/cgi/man.cgi?query=mono-cil-strip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-cil-strip]  is a tool which takes an	assembly, and empty its	method
bodies.	This is	useful to reduce an assembly size when an assembly has       already	been compiled using Mono's Ahead Of Time compiler (AOT), where       the CIL code is no longer necessary, but	the metadata still is.
|-
|mono-configuration-crypto||[https://www.freebsd.org/cgi/man.cgi?query=mono-configuration-crypto&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-configuration-crypto]  -  Mono configuration utility to manage encryption	keys and encrypt/decrypt config	file sections
|-
|mono-find-provides||
|-
|mono-find-requires||
|-
|mono-gdb.py||
|-
|mono-heapviz||
|-
|mono-package-runtime||
|-
|mono-service||[https://www.freebsd.org/cgi/man.cgi?query=mono-service&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-service, mono-service2] - Mono ServiceProcess host

|-
|mono-service2||[https://www.freebsd.org/cgi/man.cgi?query=mono-service&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-service, mono-service2] - Mono ServiceProcess host

|-
|mono-sgen||
|-
|mono-sgen-gdb.py||
|-
|mono-shlib-cop||[https://www.freebsd.org/cgi/man.cgi?query=mono-shlib-cop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-shlib-cop] -	Shared Library Usage Checker
|-
|mono-symbolicate||[https://www.freebsd.org/cgi/man.cgi?query=mono-symbolicate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-symbolicate] - Mono Symbolicate Tool
|-
|mono-test-install||
|-
|mono-xmltool||[https://www.freebsd.org/cgi/man.cgi?query=mono-xmltool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-xmltool] - Mono XML validation and transformation tool.
|-
|monodis||[https://www.freebsd.org/cgi/man.cgi?query=monodis&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  monodis] - CIL image content dumper and disassembler.
|-
|monodocer||[https://www.freebsd.org/cgi/man.cgi?query=monodocer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monodocer] - ECMA	Documentation Format Support
|-
|monodocs2html||[https://www.freebsd.org/cgi/man.cgi?query=monodocs2html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monodocs2html] - Translate Monodoc XML to	HTML
|-
|monodocs2slashdoc||
|-
|monograph||
|-
|monolinker||[https://www.freebsd.org/cgi/man.cgi?query=monolinker&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monolinker] is a CIL Linker.  The	linker is a tool one can use  to  only
ship the	minimal	possible set of	functions that a set of	programs might      require to run as opposed to the	full libraries.
|-
|monop||[https://www.freebsd.org/cgi/man.cgi?query=monop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monop, monop2] - Mono Class Outline Viewer
|-
|monop2||[https://www.freebsd.org/cgi/man.cgi?query=monop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monop, monop2] - Mono Class Outline Viewer
|-
|morph3d||[https://www.freebsd.org/cgi/man.cgi?query=morph3d&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html morph3d] - 3d morphing objects. Another 3d shape-changing GL hack. It has the same  shiny-plastic  feel       as Superquadrics, as many computer-generated objects do...
|-
|mouse-dpi-tool||
|-
|mozcerts-qt5||
|-
|mozo||[https://www.freebsd.org/cgi/man.cgi?query=mozo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Mozo]  is	a menu editor for MATE using the freedesktop.org menu specification. It is a fork of Alacarte.

|-
|mozroots||[https://www.freebsd.org/cgi/man.cgi?query=mozroots&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mozroots] - Download and import trusted root certificates	from Mozilla's
LXR into	Mono's certificate store

|-
|mp3fs||[https://www.freebsd.org/cgi/man.cgi?query=mp3fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mp3fs] - mounts and transcodes FLACs to MP3s on the fly
|-
|mp3rtp||
|-
|mpeg2dec||[https://www.freebsd.org/cgi/man.cgi?query=mpeg2dec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mpeg2dec] - decode MPEG and MPEG2	video streams
|-
|MPEG2TransportStreamIndexer||
|-
|mpg123||[https://www.freebsd.org/cgi/man.cgi?query=mpg123&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mpg123] -	play audio MPEG	1.0/2.0/2.5 stream (layers 1, 2	and 3)

|-
|mpg123-id3dump||
|-
|mpg123-strip||
|-
|mpicalc||
|-
|mppcheck||
|-
|mpplu||
|-
|mppprof||
|-
|mprof-report||[https://www.freebsd.org/cgi/man.cgi?query=mprof-report&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mprof-report(1)] - The Mono	log profiler can be used to collect a lot of information about        a program running in the	Mono runtime.  This data  can  be  used	 (both       while  the  process is running and later) to do analyses	of the program       behaviour, determine resource usage, performance	issues	or  even  look       for particular execution	patterns.
|-
|msd-background-helper||
|-
|msgattrib||[https://www.freebsd.org/cgi/man.cgi?query=msgattrib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgattrib] - attribute matching and manipulation on message catalog

|-
|msgcat||[https://www.freebsd.org/cgi/man.cgi?query=msgcat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgcat] -	combines several message catalogs
|-
|msgcmp||[https://www.freebsd.org/cgi/man.cgi?query=msgcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgcmp] -	compare	message	catalog	and template
|-
|msgcomm||[https://www.freebsd.org/cgi/man.cgi?query=msgcomm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgcomm] - match two message catalogs
|-
|msgconv||[https://www.freebsd.org/cgi/man.cgi?query=msgconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgconv] - character set conversion for message catalog
|-
|msgen||[https://www.freebsd.org/cgi/man.cgi?query=msgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgen] - create English message catalog
|-
|msgexec||[https://www.freebsd.org/cgi/man.cgi?query=msgexec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgexec] - process translations of message catalog

|-
|msgfilter||[https://www.freebsd.org/cgi/man.cgi?query=msgfilter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgfilter] - edit	translations of	message	catalog
|-
|msgfmt||[https://www.freebsd.org/cgi/man.cgi?query=msgfmt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgfmt] -	compile	message	catalog	to binary format

|-
|msggrep||[https://www.freebsd.org/cgi/man.cgi?query=msggrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msggrep] - pattern matching on message catalog

|-
|msginit||[https://www.freebsd.org/cgi/man.cgi?query=msginit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msginit] - initialize a message catalog
|-
|msgmerge||[https://www.freebsd.org/cgi/man.cgi?query=msgmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgmerge] - merge	message	catalog	and template
|-
|msgunfmt||[https://www.freebsd.org/cgi/man.cgi?query=msgunfmt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgunfmt]	- uncompile message catalog from binary	format
|-
|msguniq||[https://www.freebsd.org/cgi/man.cgi?query=msguniq&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msguniq] - unify duplicate translations in message catalog;        Unifies	duplicate translations in a translation	catalog.  Finds	duplicate translations of the	same message ID.  Such duplicates are  invalid     input  for other	programs like msgfmt, msgmerge or msgcat.  By default,       duplicates are merged together.	When using the --repeated option, only       duplicates  are output, and all other messages are discarded.  Comments       and extracted comments will be cumulated, except	that if	--use-first is
specified,  they	 will be taken from the	first translation.  File positions will be cumulated.	 When using the	 --unique  option,  duplicates       are discarded.
|-
|mtdev-test||
|-
|mtp-albumart||
|-
|mtp-albums||
|-
|mtp-connect||
|-
|mtp-detect||
|-
|mtp-emptyfolders||
|-
|mtp-files||
|-
|mtp-filetree||
|-
|mtp-folders||
|-
|mtp-format||
|-
|mtp-getplaylist||
|-
|mtp-newplaylist||
|-
|mtp-playlists||
|-
|mtp-reset||
|-
|mtp-thumb||
|-
|mtp-tracks||
|-
|mtp-trexist||
|-
|multiarb||
|-
|multictx||
|-
|multinoise||
|-
|multitex||
|-
|munch||The [https://www.freebsd.org/cgi/man.cgi?query=munch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html munch] program performs the munching squares hack.  It picks	square        size,  position,	 and  gravity randomly.	 It also displays a creatively       broken misimplementation	of the classic algorithm.
|-
|mutter||[https://www.freebsd.org/cgi/man.cgi?query=mutter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MUTTER] -	Clutter	based compositing GTK2 Window Manager

|-
|mvxattr||[https://www.freebsd.org/cgi/man.cgi?query=mvxattr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mvxattr] - Recursively rename extended attributes
|-
|mwaw2csv||
|-
|mwaw2html||
|-
|mwaw2raw||
|-
|mwaw2svg||
|-
|mwaw2text||
|-
|mwawFile||
|-
|mwawZip||
|-
|my_print_defaults||[https://www.freebsd.org/cgi/man.cgi?query=my_print_defaults&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html my_print_defaults] displays the options that are present in option       groups of option	files. The output indicates what options will be used       by programs that	read the specified option groups. For example, the       mysqlcheck program reads	the [mysqlcheck] and [client] option groups.
|-
|myisam_ftdump||[https://www.freebsd.org/cgi/man.cgi?query=myisam_ftdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisam_ftdump] displays information about	FULLTEXT indexes in MyISAM
tables. It reads	the MyISAM index file directly,	so it must be run on       the server host where the table is located. Before using	myisam_ftdump,       be sure to issue	a FLUSH	TABLES statement first if the server is       running.

|-
|myisamchk||The [https://www.freebsd.org/cgi/man.cgi?query=myisamchk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisamchk] utility gets information about your database tables or       checks, repairs,	or optimizes them.  myisamchk works with MyISAM	tables       (tables that have .MYD and .MYI files for storing data and indexes).

|-
|myisamlog||[https://www.freebsd.org/cgi/man.cgi?query=myisamlog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisamlog] processes the contents	of a MyISAM log	file. To create	such a
file, start the server with a --log-isam=log_file option.

|-
|myisampack||The [https://www.freebsd.org/cgi/man.cgi?query=myisampack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisampack] utility compresses MyISAM	tables.	 myisampack works by
compressing each	column in the table separately.	Usually, myisampack       packs the data file 40% to 70%.
|-
|mysql||[https://www.freebsd.org/cgi/man.cgi?query=mysql&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql] is	a simple SQL shell with	input line editing capabilities. It    supports	interactive and	noninteractive use. When used interactively,       query results are presented in an ASCII-table format. When used       noninteractively	(for example, as a filter), the	result is presented in       tab-separated format. The output	format can be changed using command       options.
|-
|mysql_config||[https://www.freebsd.org/cgi/man.cgi?query=mysql_config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_config] provides you with useful information for compiling your        MySQL client and	connecting it to MySQL.	It is a	shell script, so it is       available only on Unix and Unix-like systems.
|-
|mysql_config_editor||The [https://www.freebsd.org/cgi/man.cgi?query=mysql_config_editor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_config_editor] utility enables you to store authentication       credentials in an encrypted login path file named .mylogin.cnf. The       file location is	the %APPDATA%\MySQL directory on Windows and the       current user's home directory on	non-Windows systems. The file can be       read later by MySQL client programs to obtain authentication       credentials for connecting to MySQL Server.
|-
|mysql_install_db||[https://www.freebsd.org/cgi/man.cgi?query=mysql_install_db&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_install_db] - initialize MySQL data	directory

|-
|mysql_plugin||[https://www.freebsd.org/cgi/man.cgi?query=mysql_plugin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_plugin] - configure	MySQL server plugins
|-
|mysql_secure_installation||[https://www.freebsd.org/cgi/man.cgi?query=mysql_secure_installation&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_secure_installation] - improve MySQL installation security
|-
|mysql_ssl_rsa_setup||
|-
|mysql_tzinfo_to_sql||The [https://www.freebsd.org/cgi/man.cgi?query=mysql_tzinfo_to_sql&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_tzinfo_to_sql] program loads the time zone tables in the mysql       database. It is used on systems that have a zoneinfo database (the set       of files	describing time	zones).	Examples of such systems are Linux,       FreeBSD,	Solaris, and OS	X. One likely location for these files is the       /usr/share/zoneinfo directory (/usr/share/lib/zoneinfo on Solaris). If       your system does	not have a zoneinfo database, you can use the       downloadable package described in Section 11.6, "MySQL Server Time Zone       Support".
|-
|mysql_upgrade||[https://www.freebsd.org/cgi/man.cgi?query=mysql_upgrade&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_upgrade] examines all tables in all	databases for      incompatibilities with the current version of MySQL Server.       mysql_upgrade also upgrades the system tables so	that you can take       advantage of new	privileges or capabilities that	might have been	added.
|-
|mysqladmin||[https://www.freebsd.org/cgi/man.cgi?query=mysqladmin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqladmin] - client for administering a MySQL server

|-
|mysqlbinlog||[https://www.freebsd.org/cgi/man.cgi?query=mysqlbinlog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlbinlog] - utility for processing binary log files
|-
|mysqlcheck||[https://www.freebsd.org/cgi/man.cgi?query=mysqlcheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlcheck] - a table maintenance	program
|-
|mysqld_multi||[https://www.freebsd.org/cgi/man.cgi?query=mysqld_multi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqld_multi] is designed	to manage several mysqld processes that	listen
for connections on different Unix socket	files and TCP/IP ports.	It can       start or	stop servers, or report	their current status.
|-
|mysqld_safe||[https://www.freebsd.org/cgi/man.cgi?query=mysqld_safe&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqld_safe] - MySQL server startup script
|-
|mysqldump||[https://www.freebsd.org/cgi/man.cgi?query=mysqldump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqldump] - a database backup program
|-
|mysqldumpslow||[https://www.freebsd.org/cgi/man.cgi?query=mysqldumpslow&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqldumpslow] - Summarize slow query log	files
|-
|mysqlimport||[https://www.freebsd.org/cgi/man.cgi?query=mysqlimport&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlimport] - a data import program

|-
|mysqlpump||
|-
|mysqlshow||The [https://www.freebsd.org/cgi/man.cgi?query=mysqlshow&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlshow] client can	be used	to quickly see which databases exist,
their tables, or	a table's columns or indexes.
|-
|mysqlslap||[https://www.freebsd.org/cgi/man.cgi?query=mysqlslap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlslap] is a diagnostic program designed to emulate client load for a
MySQL server and	to report the timing of	each stage. It works as	if       multiple	clients	are accessing the server.
|-
|mysqltest||[https://www.freebsd.org/cgi/man.cgi?query=mysqltest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqltest] - program to run test cases
|-
|mysqlxtest||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content N===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|nano||[https://www.freebsd.org/cgi/man.cgi?query=nano&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nano]  is	 a small, free and friendly editor which aims to replace Pico,       the default editor included in the non-free Pine	package.   On  top  of       copying	Pico's	look  and  feel, nano also implements some missing (or       disabled	by default) features in	Pico, such as "search and replace" and       "go to line and column number".
|-
|natpmpc||
|-
|nautilus||[https://www.freebsd.org/cgi/man.cgi?query=nautilus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nautilus] - the GNOME File Manager
|-
|nautilus-autorun-software||
|-
|ndrdump||[https://www.freebsd.org/cgi/man.cgi?query=ndrdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ndrdump] tries to	parse the specified filename using Samba's parser for
the specified pipe and function.	The third argument should be either in       or out, depending on whether the	data should be parsed as a request or       a reply.
|-
|nemo||[https://www.freebsd.org/cgi/man.cgi?query=nemo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nemo] - the Cinnamon File	Manager
|-
|nemo-autorun-software||
|-
|nemo-connect-server||[https://www.freebsd.org/cgi/man.cgi?query=nemo-connect-server&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nemo-connect-server] - To	Access a remote	server
|-
|nemo-open-with||
|-
|nemo-preview||
|-
|neofetch||
|-
|neon-config||[https://www.freebsd.org/cgi/man.cgi?query=neon-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html neon-config] - script providing information about	installed copy of neon       library
|-
|neqn||The  [https://www.freebsd.org/cgi/man.cgi?query=neqn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html neqn]  program  is  actually	 just a	shell script which invokes the       [https://www.freebsd.org/cgi/man.cgi?query=eqn&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports eqn(1)] command with the ascii output device.
|-
|net||[https://www.freebsd.org/cgi/man.cgi?query=net&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html net] - Tool for administration of	Samba and remote CIFS servers.
|-
|net-snmp-cert||
|-
|net-snmp-config||[https://www.freebsd.org/cgi/man.cgi?query=net-snmp-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html net-snmp-config] -  returns  information	 about	installed net-snmp libraries and binaries
|-
|net-snmp-create-v3-user||The  [https://www.freebsd.org/cgi/man.cgi?query=net-snmp-create-v3-user&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html net-snmp-create-v3-user]  shell  script is designed to create a new      user in net-snmp	configuration file  (/var/net-snmp/snmpd.conf  by  default).

|-
|netcardmgr||
|-
|nettle-hash||
|-
|nettle-lfib-stream||
|-
|nettle-pbkdf2||
|-
|networkmgr||
|-
|ngettext||The  [https://www.freebsd.org/cgi/man.cgi?query=ngettext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ngettext]  program  translates  a natural language message into the       user's language,	by looking up the translation in  a  message  catalog,       and  chooses  the  appropriate plural form, which depends on the	number       COUNT and the language of the message catalog where the translation was       found.
|-
|nm||[https://www.freebsd.org/cgi/man.cgi?query=nm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nm] -- display symbolic information	in object files; The nm utility displays symbolic information in the object	files, executables, and object library files	named by its arguments.	 Lack of symbolic information in an otherwise valid input file, is not	considered to    be	an error.  If no files are specified on	the command line, nm will attempt to read a.out.

|-
|nmblookup||[https://www.freebsd.org/cgi/man.cgi?query=nmblookup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nmblookup] - NetBIOS over	TCP/IP client used to lookup NetBIOS names; nmblookup is used to query NetBIOS names	and map	them to	IP addresses       in a network using NetBIOS over TCP/IP queries. The options allow the       name queries to be directed at a	particular IP broadcast	area or	to a
particular machine. All queries are done	over UDP.

|-
|noise||
|-
|noise2||
|-
|nop||[https://www.freebsd.org/cgi/man.cgi?query=nop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nop] reads a stream of graphs and	prints each in pretty-printed (canonical) format on stdout. If no files are given, it	reads from stdin.
|-
|notify-send||
|-
|npth-config||
|-
|nroff||The [https://www.freebsd.org/cgi/man.cgi?query=nroff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nroff] script	emulates the nroff command using groff.	  Only	ascii,
latin1, koi8-r, utf8, and cp1047	are valid arguments for	the -T option,       selecting the output encoding emitted by	grotty,	groff's	TTY output device.  If an invalid or no -T option is given, nroff checks the current
locale to select	a default output device.
|-
|nspr-config||
|-
|nss-config||
|-
|ntfs-3g||[https://www.freebsd.org/cgi/man.cgi?query=ntfs-3g&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfs-3g]	is  an	NTFS  driver,  which  can create, remove, rename, move
files, directories, hard	links, and streams;  it	 can  read  and	 write       files,  including  streams,  sparse  files and transparently compressed       files; it can handle special files like symbolic	 links,	 devices,  and       FIFOs;  moreover	 it provides standard management of file ownership and       permissions, including POSIX ACLs.
|-
|ntfs-3g.probe||The  [https://www.freebsd.org/cgi/man.cgi?query=ntfs-3g.probe&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfs-3g.probe]  utility tests a volume if it's NTFS mountable readonly or read-write, and exits with a  status  value  accordingly.   The       volume can be a block device or image file.
|-
|ntfscat||[https://www.freebsd.org/cgi/man.cgi?query=ntfscat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscat] - print NTFS files and streams on the standard output
|-
|ntfscluster||[https://www.freebsd.org/cgi/man.cgi?query=ntfscluster&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscluster] - identify files in a specified region of an	NTFS volume.
|-
|ntfscmp||[https://www.freebsd.org/cgi/man.cgi?query=ntfscmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscmp] - compare two NTFS filesystems and tell the differences

|-
|ntfsfix||[https://www.freebsd.org/cgi/man.cgi?query=ntfsfix&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsfix] - fix common errors and force Windows to	check NTFS
|-
|ntfsinfo||[https://www.freebsd.org/cgi/man.cgi?query=ntfsinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsinfo] - dump a file's	attributes
|-
|ntfsls||[https://www.freebsd.org/cgi/man.cgi?query=ntfsls&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsls] -	list directory contents	on an NTFS filesystem

|-
|ntlm_auth||[https://www.freebsd.org/cgi/man.cgi?query=ntlm_auth&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntlm_auth] - tool	to allow external access to Winbind's NTLM
authentication function
|-
|numbers2csv||
|-
|numbers2raw||
|-
|numbers2text||
|-
|nunit-console||
|-
|nunit-console2||
|-
|nunit-console4||
|-
|nvidia-bug-report.sh||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content O===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|objcopy||[https://www.freebsd.org/cgi/man.cgi?query=objcopy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html objcopy] --	copy and translate object files
|-
|objdump||[https://www.freebsd.org/cgi/man.cgi?query=objdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html objdump] - display information from object files.
|-
|ocs||
|-
|ocspclnt||
|-
|ocsptool||[https://www.freebsd.org/cgi/man.cgi?query=ocsptool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ocsptool] - GnuTLS OCSP tool; Ocsptool	 is  a program that can	parse and print	information about OCSP       requests/responses, generate requests and verify	responses.

|-
|oeminst||
|-
|offset||
|-
|oidcalc||
|-
|okular||[https://www.freebsd.org/cgi/man.cgi?query=okular&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html okular] -	a universal document viewer

|-
|okularkirigami||
|-
|oLschema2ldif||[https://www.freebsd.org/cgi/man.cgi?query=oLschema2ldif&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html oLschema2ldif] is	a simple tool that converts standard OpenLDAP schema
files to	a LDIF format that is understood by LDB.
|-
|openal-info||
|-
|openRTSP||
|-
|opj_compress||
|-
|opj_decompress||
|-
|opj_dump||
|-
|opt80||
|-
|orbit2-config||
|-
|orbit-idl-2||
|-
|orc-bugreport||
|-
|orcc||
|-
|orcus-css-dump||
|-
|orcus-detect||
|-
|orcus-json||
|-
|orcus-mso-encryption||
|-
|orcus-xml-dump||
|-
|orcus-yaml||
|-
|orcus-zip-dump||
|-
|osage||[https://www.freebsd.org/cgi/man.cgi?query=osage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html osage] - filter for drawing clustered graphs

|-
|out123||[https://www.freebsd.org/cgi/man.cgi?query=out123&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html out123] -	send raw PCM audio or a	waveform pattern to an output device
|-
|overlay||[https://www.freebsd.org/cgi/man.cgi?query=overlay&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html overlay,	overwrite, copywin] - overlay and manipulate overlapped curses
windows
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content P===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|p7content||[https://github.com/servo/nss/blob/master/cmd/p7content/p7content.c p7content] -- A command to display pkcs7 content.
|-
|p7env||[https://github.com/servo/nss/blob/master/cmd/p7env/p7env.c p7env] -- A command to create a pkcs7 enveloped data.
|-
|p7sign||[https://github.com/servo/nss/blob/master/cmd/p7sign/p7sign.c p7sign] -- A command to create a *detached* pkcs7 signature (over a given input file).
|-
|p7verify||[https://github.com/servo/nss/blob/master/cmd/p7verify/p7verify.c p7verify] -- A command to do a verification of a *detached* pkcs7 signature.
|-
|p11-kit||[https://p11-glue.github.io/p11-glue/p11-kit.html p11-kit] - - Provides a way to load and enumerate PKCS#11 modules. Provides a standard configuration setup for installing PKCS#11 modules in such a way that they're discoverable.
|-
|p11tool||[https://www.freebsd.org/cgi/man.cgi?query=p11tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html p11tool] - GnuTLS	PKCS #11 tool
Program	that  allows  operations  on PKCS #11 smart cards and security        modules.
|-
|pa-info||
|-
|pacat||[https://www.freebsd.org/cgi/man.cgi?query=pacat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pacat]  -	Play back or record raw	or encoded audio streams on a PulseAudio sound server
|-
|pacmd||[https://www.freebsd.org/cgi/man.cgi?query=pacmd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pacmd] - Reconfigure a PulseAudio	sound server during runtime

|-
|pactl||[https://www.freebsd.org/cgi/man.cgi?query=pactl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pactl] - Control a running PulseAudio sound server
|-
|padsp||[https://www.freebsd.org/cgi/man.cgi?query=padsp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html padsp] starts the	specified program and redirects	its access to OSS compatible audio devices (/dev/dsp and auxiliary devices) to a  PulseAudio       sound server.
|-
|pages2html||
|-
|pages2raw||
|-
|pages2text||
|-
|pal2rgb||[https://www.freebsd.org/cgi/man.cgi?query=pal2rgb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pal2rgb] - convert a palette color TIFF image to a full color image
|-
|paltex||
|-
|pam_helper||
|-
|pango-list||
|-
|pango-view||[https://www.freebsd.org/cgi/man.cgi?query=pango-view&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pango-view] - Pango text viewer
|-
|paperconf||[https://www.freebsd.org/cgi/man.cgi?query=paperconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html paperconf] - print paper configuration information
|-
|parsetrigrams||
|-
|pasuspender||[https://www.freebsd.org/cgi/man.cgi?query=pasuspender&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pasuspender] is a	tool that can be used to tell a	local PulseAudio sound
server to temporarily suspend access to the  audio  devices,  to	 allow       other  applications  access them	directly. pasuspender will suspend access to the audio devices, fork a child process,	 and  when  the	 child
process terminates, resume access again.
|-
|pavucontrol||[https://www.freshports.org/audio/pavucontrol/ pavucontrol] GTK mixer for PulseAudio
|-
|pax11publish||[https://www.freebsd.org/cgi/man.cgi?query=pax11publish&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pax11publish] - PulseAudio X11 Credential	Utility

|-
|pbdemo||
|-
|pbinfo||
|-
|pbmtojbg||[https://www.freebsd.org/cgi/man.cgi?query=pbmtojbg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pbmtojbg	]- portable bitmap to JBIG1 file	converter
|-
|pbmtojbg85||
|-
|pcre2-config||[https://www.freebsd.org/cgi/man.cgi?query=pcre2-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre2-config] - program to return	PCRE2 configuration
|-
|pcre2grep||[https://www.freebsd.org/cgi/man.cgi?query=pcre2grep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre2grep] - a grep with Perl-compatible regular expressions.
|-
|pcre2test||[https://www.freebsd.org/cgi/man.cgi?query=pcre2test&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre2test] - a program for testing Perl-compatible regular expressions.
|-
|pcre-config||[https://www.freebsd.org/cgi/man.cgi?query=pcre-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre-config]  returns  the configuration of the installed	PCRE libraries
and the options required	to compile a program to	use them. Some of  the       options	apply  only  to	the 8-bit, or 16-bit, or 32-bit	libraries, respectively, and are not available if only one of	 those	libraries  has
been built. If an unavailable option is encountered, the	"usage"	information is output.

|-
|pcregrep||[https://www.freebsd.org/cgi/man.cgi?query=pcregrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcregrep] - a grep with Perl-compatible regular expressions.

|-
|pcretest||[https://www.freebsd.org/cgi/man.cgi?query=pcretest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcretest]	- a program for	testing	Perl-compatible	regular	expressions.
|-
|pdb2mdb||[https://www.freebsd.org/cgi/man.cgi?query=pdb2mdb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdb2mdb] - Program Database to Mono Debugging Symbol converter.
|-
|pdbedit||[https://www.freebsd.org/cgi/man.cgi?query=pdbedit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdbedit] - manage	the SAM	database (Database of Samba Users)

|-
|pdf2dsc||[https://www.freebsd.org/cgi/man.cgi?query=pdf2dsc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdf2dsc] - generate a PostScript page list of a PDF document

|-
|pdf2ps||[https://www.freebsd.org/cgi/man.cgi?query=pdf2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdf2ps] -	Ghostscript PDF	to PostScript translator
|-
|pdfattach||
|-
|pdfdetach||[https://www.freebsd.org/cgi/man.cgi?query=pdfdetach&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfdetach]  -  Portable Document Format (PDF) document embedded file extractor (version	3.03)
|-
|pdffonts||[https://www.freebsd.org/cgi/man.cgi?query=pdffonts&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdffonts] - Portable Document Format (PDF) font analyzer (version	3.03)
|-
|pdfimages||[https://www.freebsd.org/cgi/man.cgi?query=pdfimages&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfimages]  -  Portable  Document	 Format	(PDF) image extractor (version     3.03)
|-
|pdfinfo||[https://www.freebsd.org/cgi/man.cgi?query=pdfinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfinfo] - Portable Document Format (PDF)	document information extractor
(version	3.03)

|-
|pdfmom||[https://www.freebsd.org/cgi/man.cgi?query=pdfmom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfmom] -	Produce	PDF documents using the	mom macro set

|-
|pdfroff||[https://www.freebsd.org/cgi/man.cgi?query=pdfroff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfroff] - create	PDF documents using groff; pdfroff is a wrapper program for	the GNU	text processing	system,	groff.        It transparently	handles	the mechanics of multiple pass groff  processing,  when  applied to suitably marked up groff source files, such that       tables of contents and body text	are formatted separately, and are subsequently  combined  in	the  correct order, for	final publication as a      single PDF document.  A further optional	"style	sheet"	capability  is       provided;  this	allows for the definition of content which is required       to precede the table of contents, in the	published document.

|-
|pdfseparate||[https://www.freebsd.org/cgi/man.cgi?query=pdfseparate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfseparate] extract single pages	from a Portable	Document Format	(PDF).
|-
|pdfsig||[https://www.freebsd.org/cgi/man.cgi?query=pdfsig&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfsig] -	Portable Document Format (PDF) digital signatures tool
|-
|pdftocairo||[https://www.freebsd.org/cgi/man.cgi?query=pdftocairo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftocairo]      -     Portable	  Document     Format	  (PDF)	    to
PNG/JPEG/TIFF/PDF/PS/EPS/SVG using cairo

|-
|pdftohtml||[https://www.freebsd.org/cgi/man.cgi?query=pdftohtml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftohtml] - program to convert PDF files	into HTML, XML and PNG images
|-
|pdftoppm||[https://www.freebsd.org/cgi/man.cgi?query=pdftoppm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftoppm] - Portable Document Format (PDF) to Portable Pixmap (PPM) con-
verter (version 3.03)
|-
|pdftops||[https://www.freebsd.org/cgi/man.cgi?query=pdftops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftops] - Portable Document Format (PDF) to PostScript converter (version 3.03)

|-
|pdftotext||[https://www.freebsd.org/cgi/man.cgi?query=pdftotext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftotext]  -  Portable Document Format (PDF) to text converter (version     3.03)
|-
|pdfunite||[https://www.freebsd.org/cgi/man.cgi?query=pdfunite&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfunite]	- Portable Document Format (PDF) page merger
|-
|peas-demo||
|-
|pedump||
|-
|peglgears||
|-
|perl||[https://www.freebsd.org/cgi/man.cgi?query=perl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perl] - The Perl 5 language interpreter
|-
|perlbug||[https://www.freebsd.org/cgi/man.cgi?query=perlbug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perlbug] - how to	submit bug reports on Perl
|-
|perldoc||[https://www.freebsd.org/cgi/man.cgi?query=perldoc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perldoc] - Look up Perl documentation in Pod format.
|-
|perlivp||[https://www.freebsd.org/cgi/man.cgi?query=perlivp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perlivp] - Perl Installation Verification	Procedure
|-
|perlthanks||[https://www.freebsd.org/cgi/man.cgi?query=perlthanks&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html This program] is designed	to help	you generate and send bug reports (and
thank-you notes)	about perl5 and	the modules which ship with it.
|-
|permview||[https://www.freebsd.org/cgi/man.cgi?query=permview&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html permview	] -  Viewer for declarative security permission sets inside assemblies.
|-
|perror||[https://www.freebsd.org/cgi/man.cgi?query=perror&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perror] -- print an	error number as	a string
|-
|peverify||
|-
|pf2afm||[https://www.freebsd.org/cgi/man.cgi?query=pf2afm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pf2afm]  - Make an AFM file from Postscript (PFB/PFA/PFM)	font files using ghostscript

|-
|pfbtopfa||The [https://www.freebsd.org/cgi/man.cgi?query=pfbtopfa&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pfbtopfa] utility converts PostScript Type 1 font files	from the binary PFB format to	the ASCII PFA format. It also converts any kind	of     line ending to the	UNIX style \n.
|-
|pfbtops||[https://www.freebsd.org/cgi/man.cgi?query=pfbtops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pfbtops] - translate a PostScript	font in	.pfb format to ASCII

|-
|pgon-mode||
|-
|phononsettings||
|-
|pi-make-microsoft-freecell-board||[https://www.freebsd.org/cgi/man.cgi?query=pi-make-microsoft-freecell-board&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html make-gnome-freecell-board, make-aisleriot-freecell-board,        pi-make-microsoft-freecell-board, make_pysol_freecell_board.py] -       Programs	to generate boards to be used as input to Freecell Solver.

|-
|pic||[https://www.freebsd.org/cgi/man.cgi?query=pic&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pic] - compile pictures for troff	or TeX
|-
|pic2graph||[https://www.freebsd.org/cgi/man.cgi?query=pic2graph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pic2graph] - convert a PIC diagram into a	cropped	image

|-
|piconv||[https://www.freebsd.org/cgi/man.cgi?query=piconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html piconv] is perl version of iconv,	a character encoding converter widely       available for various Unixen today.  This script	was primarily a       technology demonstrator for Perl	5.8.0, but you can use piconv in the       place of	iconv for virtually any	case.
|-
|pidl||[https://www.freebsd.org/cgi/man.cgi?query=pidl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pidl] - An IDL compiler written in Perl
|-
|pinentry-gnome3||
|-
|pinentry-qt5||
|-
|pinentry-tty||
|-
|pixeltest||
|-
|pk12util||
|-
|pkaction||
|-
|pkcheck||
|-
|pkcs1-conv||
|-
|pkexec||
|-
|pkgdata||[https://www.freebsd.org/cgi/man.cgi?query=pkgdata&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pkgdata]	takes  a set of	data files and packages	them for use by	ICU or
applications that use ICU. The typical reason to	 package  files	 using       pkgdata	is  to make their distribution easier and their	loading	by ICU       faster and less consuming of limited system resources such as file  descriptors.   Packaged  data  also  allow	applications to	be distributed       with fewer resource files, or even  with	 none  at  all	if  they  link      against the packaged data directly
|-
|pkttyagent||
|-
|pl2pm||[https://www.freebsd.org/cgi/man.cgi?query=pl2pm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pl2pm] is	a tool to aid in the conversion	of Perl4-style .pl library       files to	Perl5-style library modules.  Usually, your old	.pl file will       still work fine and you should only use this tool if you	plan to	update       your library to use some	of the newer Perl 5 features, such as       AutoLoading.
|-
|plank||[https://www.freebsd.org/cgi/man.cgi?query=plank&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Plank]  is  meant	 to be the simplest dock on the	planet.	The goal is to        provide just what a dock	needs and absolutely nothing more. It is, however,  a	 library  which	 can be	extended to create other dock programs       with more advanced features.  Thus, Plank is the	underlying  technology       for  Docky (starting in version 3.0.0) and aims to provide all the core       features	while Docky extends it to add fancier  things  like  Docklets,       painters, settings dialogs, etc.
|-
|plasmapkg2||[https://www.freebsd.org/cgi/man.cgi?query=plasmapkg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html plasmapkg2] - Install, list, remove Plasma packages
|-
|playSIP||
|-
|plistutil||
|-
|pluma||[https://www.freebsd.org/cgi/man.cgi?query=pluma&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Pluma] - The MATE	Text Editor
|-
|pmd2raw||
|-
|pmd2svg||
|-
|pmd2text||
|-
|png-fix-itxt||
|-
|pngfix||
|-
|pngtogd||
|-
|pngtogd2||
|-
|pod2html||[https://www.freebsd.org/cgi/man.cgi?query=pod2html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2html]	- convert .pod files to	.html files
|-
|pod2man||[https://www.freebsd.org/cgi/man.cgi?query=pod2man&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2man] - Convert POD data to formatted *roff input

|-
|pod2text||[https://www.freebsd.org/cgi/man.cgi?query=pod2text&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2text]	- Convert POD data to formatted	ASCII text

|-
|pod2usage||[https://www.freebsd.org/cgi/man.cgi?query=pod2usage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2usage] - print usage messages	from embedded pod docs in files
|-
|podchecker||[https://www.freebsd.org/cgi/man.cgi?query=podchecker&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html podchecker] - check the syntax of	POD format documentation files

|-
|podselect||[https://www.freebsd.org/cgi/man.cgi?query=podselect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html podselect] - print selected sections of pod documentation	on standard       output
|-
|point||[https://www.freebsd.org/cgi/man.cgi?query=point&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html point]

SYNOPSIS
   Public Attributes
       double x
       double y
       double z
|-
|point-clip||
|-
|point-param||
|-
|point-sprite||
|-
|point-wide||
|-
|point-wide-smooth||
|-
|pointblast||
|-
|pointcoord||
|-
|points||
|-
|polkit-action||[https://www.freebsd.org/cgi/man.cgi?query=polkit-action&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-action] - List and	modify registered PolicyKit actions
|-
|polkit-auth||[https://www.freebsd.org/cgi/man.cgi?query=polkit-auth&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-auth] - Manage authorizations

|-
|polkit-config-file-validate||[https://www.freebsd.org/cgi/man.cgi?query=polkit-config-file-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-config-file-validate] is used to verify that a given PolicyKit       configuration file is valid. If no path to a config file	is given, the       default /etc/PolicyKit/PolicyKit.conf file will be verified.

|-
|polkit-gnome-authorization||
|-
|polkit-gnome-example||
|-
|polkit-policy-file-validate||[https://www.freebsd.org/cgi/man.cgi?query=polkit-policy-file-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-policy-file-validate] - Validate a	PolicyKit policy file
|-
|poly||[https://www.freebsd.org/cgi/man.cgi?query=poly&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html poly] starts the Poly/ML shell. Poly/ML is an implementation of Standard       ML written by David Matthews originally at the University of  Cambridge       and maintained as a project supported by	contributors.
|-
|poly-flat||
|-
|poly-flat-clip||
|-
|poly-flat-unfilled-clip||
|-
|poly-unfilled||
|-
|post-grohtml||
|-
|ppdc||[https://www.freebsd.org/cgi/man.cgi?query=ppdc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdc] - cups ppd compiler	(deprecated)

|-
|ppdhtml||[https://www.freebsd.org/cgi/man.cgi?query=ppdhtml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdhtml] - cups html summary generator (deprecated)
|-
|ppdi||[https://www.freebsd.org/cgi/man.cgi?query=ppdi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdi] - import ppd files (deprecated)
|-
|ppdmerge||[https://www.freebsd.org/cgi/man.cgi?query=ppdmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdmerge] merges two or more PPD files into a single, multi-language PPD
file.  This program is deprecated and will be removed in	a  future  release of	CUPS.
|-
|ppdpo||[https://www.freebsd.org/cgi/man.cgi?query=ppdpo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdpo] extracts UI strings from PPDC source files	and updates  either  a       GNU  gettext  or	 macOS	strings	format message catalog source file for       translation.  This program is deprecated	and will be removed in	a  future release of CUPS.
|-
|pphs||
|-
|ppm2tiff||[https://www.freebsd.org/cgi/man.cgi?query=ppm2tiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppm2tiff] converts a file	in the PPM, PGM	and PBM	image formats to TIFF.
|-
|pre-grohtml||
|-
|precat||
|-
|preconv||[https://www.freebsd.org/cgi/man.cgi?query=preconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html preconv] reads files and converts	its encoding(s)	to a form GNU troff(1)
can process, sending the	data  to  standard  output.   Currently,  this       means ASCII characters and `\[uXXXX]' entities, where `XXXX' is a hexadecimal number with four	to six digits, representing  a	Unicode	 input
code.   Normally,  preconv should be invoked with the -k	and -K options       of groff.
|-
|preparetips5||[https://www.freebsd.org/cgi/man.cgi?query=preparetips5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html preparetips5] 	- extract text from tips file
|-
|preunzip||
|-
|prezip||
|-
|prezip-bin||
|-
|printafm||[https://www.freebsd.org/cgi/man.cgi?query=printafm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html printafm] - Print	the metrics from a Postscript font in AFM format using
ghostscript
|-
|printcal||
|-
|printtarg||
|-
|profcheck||
|-
|profile2map||[https://www.freebsd.org/cgi/man.cgi?query=profile2map&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html profile2map] -- Fuse profiler output converter

|-
|profiles||[https://www.freebsd.org/cgi/man.cgi?query=profiles&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html profiles] - A utility to report and change SIDs in registry files
|-
|projtex||
|-
|protoc||
|-
|protocoltojson||
|-
|prove||[https://www.freebsd.org/cgi/man.cgi?query=prove&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html prove] - Run tests through a TAP harness
|-
|proxy||
|-
|prune||[https://www.freebsd.org/cgi/man.cgi?query=prune&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html prune]  reads  directed graphs in	the same format	used by	[https://www.freebsd.org/cgi/man.cgi?query=dot&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports dot(1)] and removes subgraphs rooted at nodes specified on the	command	line  via  options. These nodes themselves will not be removed, but can be given attributes	so that	they can be easily located by a	 graph	stream	editor       such  as	 [https://www.freebsd.org/cgi/man.cgi?query=gvpr&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gvpr(1)].   prune  correctly  handles cycles, loops and	multiedges.
|-
|ps2ascii||[https://www.freebsd.org/cgi/man.cgi?query=ps2ascii&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2ascii]	- Ghostscript translator from PostScript or PDF	to ASCII

|-
|ps2epsi||[https://www.freebsd.org/cgi/man.cgi?query=ps2epsi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2epsi] - generate conforming Encapsulated PostScript
|-
|ps2pdf||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf] -	Convert	PostScript to PDF using	ghostscript
|-
|ps2pdf12||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf12] - Convert PostScript to PDF 1.2 (Acrobat 3-and-later compatible) using ghostscript
|-
|ps2pdf13||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf13] - Convert PostScript to	PDF 1.3	(Acrobat 4-and-later  compatible) using ghostscript
|-
|ps2pdf14||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf14] - Convert PostScript to PDF 1.4 (Acrobat 5-and-later compatible) using ghostscript
|-
|ps2pdfwr||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdfwr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdfwr]	 -  Convert  PostScript	 to PDF	without	specifying CompatibilityLevel, using ghostscript
|-
|ps2ps||[https://www.freebsd.org/cgi/man.cgi?query=ps2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2ps, eps2eps] -	Ghostscript PostScript "distiller"
|-
|ps2ps2||
|-
|psbook||[https://www.freebsd.org/cgi/man.cgi?query=psbook&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Psbook]  rearranges pages	from a PostScript document into	``signatures''       for printing books or booklets, creating	a new PostScript file. The input  PostScript	file should follow the Adobe Document Structuring Conventions.
|-
|psicc||[https://www.freebsd.org/cgi/man.cgi?query=psicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psicc] - little cms PostScript converter.
|-
|psktool||[https://www.freebsd.org/cgi/man.cgi?query=psktool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psktool] - GnuTLS	PSK tool,  Program	 that generates	random keys for	use with TLS-PSK. The keys are      stored in hexadecimal format in a key file.
|-
|psmerge||[https://www.freebsd.org/cgi/man.cgi?query=psmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psmerge] - filter	to merge several PostScript files into one
|-
|psnup||[https://www.freebsd.org/cgi/man.cgi?query=psnup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psnup] - multiple	pages per sheet; Psnup  puts  multiple  logical pages onto each physical sheet of	paper.       The input PostScript file should	follow the Adobe Document  Structuring
Conventions.
|-
|pspell-config||[https://www.freebsd.org/cgi/man.cgi?query=pspell-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pspell-config] displays information about	libpspell installation,	mostly
for use in build	scripts.  Note that this script	is provided for	 backward  compatibility  with  programs  that use pspell.  Do not use as it       will eventually go away.

|-
|psresize||[https://www.freebsd.org/cgi/man.cgi?query=psresize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Psresize]	rescales and centres a document	on a different size of	paper.
The  input PostScript file should follow	the Adobe Document Structuring     Conventions.
|-
|psselect||[https://www.freebsd.org/cgi/man.cgi?query=psselect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Psselect] selects	pages from a PostScript	document, creating a new PostScript file. The	input PostScript file should follow the	Adobe Document      Structuring Conventions.

|-
|pstops||[https://www.freebsd.org/cgi/man.cgi?query=pstops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Pstops] rearranges pages from a  PostScript  document,  creating	a  new       PostScript  file.   The	input  PostScript file should follow the Adobe       Document	Structuring Conventions.  Pstops can  be  used	to  perform  a       large  number  of arbitrary re-arrangements of Documents, including arranging for printing 2-up, 4-up,	booklets, reversing,  selecting	 front       or back sides of	documents, scaling, etc.
|-
|ptar||[https://www.freebsd.org/cgi/man.cgi?query=ptar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ptar] - - a	tar-like program written in perl
|-
|ptardiff||[https://www.freebsd.org/cgi/man.cgi?query=ptardiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ptardiff] - program that diffs an	extracted archive against an       unextracted one
|-
|ptargrep||[https://www.freebsd.org/cgi/man.cgi?query=ptargrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ptargrep] - Apply	pattern	matching to the	contents of files in a tar       archive

|-
|pub2raw||
|-
|pub2xhtml||
|-
|pulseaudio||[https://www.freebsd.org/cgi/man.cgi?query=pulseaudio&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pulseaudio] - The	PulseAudio Sound System

|-
|pwmake||[https://www.freebsd.org/cgi/man.cgi?query=pwmake&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pwmake] -	simple tool for	generating random relatively easily pronounceable passwords
|-
|pwscore||[https://www.freebsd.org/cgi/man.cgi?query=pwscore&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pwscore]	is a simple tool for checking quality of a password. The password is read from stdin.

|-
|pydoc2.7||
|-
|pydoc3.6||
|-
|pydoc3.7||
|-
|pygobject-codegen-2.0||
|-
|pygtk-codegen-2.0||
|-
|pygtk-demo||
|-
|python2.7||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
|-
|python2.7-config||
|-
|python3.6||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
|-
|python3.6m||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
|-
|python3.6m-config||
|-
|python3.7||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
|-
|python3.7m||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
|-
|python3.7m-config||
|-
|pyuic5-3.7||
|-
|pyvenv-3.6||
|-
|pyvenv-3.7||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content Q===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|qcatool-qt5||[https://www.freebsd.org/cgi/man.cgi?query=qcatool-qt5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qcatool] is a command line tool for performing various cryptographic operations	with the Qt Cryptographic Architecture (QCA). qcatool can also       be used for testing and debugging QCA.
|-
|qpaeq||
|-
|qpdf||[https://www.freebsd.org/cgi/man.cgi?query=qpdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qpdf] - PDF transformation software
The  qpdf program is used to convert one	PDF file to another equivalent       PDF file.  It is	capable	of performing  a  variety  of  transformations       such as linearization (also known as web	optimization or	fast web viewing), encryption, and decryption	of PDF files.  It also	has  many  options  for  inspecting  or checking PDF files, some of which are	useful       primarily to PDF	developers.

|-
|qqwing||[https://www.freebsd.org/cgi/man.cgi?query=qqwing&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qqwing] -	A tool for generating and solving Sudoku puzzles
|-
|qtchooser||[https://www.freebsd.org/cgi/man.cgi?query=qtchooser&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qtchooser] - a wrapper used to select between Qt development binary versions
Qt is a cross-platform C++ application framework. Qt's primary  feature       is its rich set of widgets that provide standard	GUI functionality.
|-
|quad||
|-
|quad-clip||
|-
|quad-clip-all-vertices||
|-
|quad-clip-nearplane||
|-
|quad-degenerate||
|-
|quad-flat||
|-
|quad-offset-factor||
|-
|quad-offset-unfilled||
|-
|quad-offset-units||
|-
|quad-tex-2d||
|-
|quad-tex-3d||
|-
|quad-tex-alpha||
|-
|quad-tex-pbo||
|-
|quad-tex-sub||
|-
|quad-unfilled||
|-
|quad-unfilled-clip||
|-
|quad-unfilled-stipple||
|-
|quadrapassel||[https://www.freebsd.org/cgi/man.cgi?query=quadrapassel&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  Quadrapassel] - Tetris-like game for GNOME
Quadrapassel  comes  from  the  classic falling-block game, Tetris. The       goal of the game	is to create  complete	horizontal  lines  of  blocks,       which will disappear.
|-
|quads||
|-
|quadstrip||
|-
|quadstrip-clip||
|-
|quadstrip-cont||
|-
|quadstrip-flat||
|-
|qvlc||
|-
|qxp2raw||
|-
|qxp2svg||
|-
|qxp2text||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content R===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|ranlib||[https://www.freebsd.org/cgi/man.cgi?query=ranlib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ar, ranlib] -- manage archives

|-
|rapper||[https://www.freebsd.org/cgi/man.cgi?query=rapper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rapper] -	Raptor RDF parsing and serializing utility
|-
|rarian-example||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-config||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-extract||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-gen-uuid||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-get-cl||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-get-content-list||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-get-extended-content-list||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-get-scripts||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-install||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-migrate||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-preinstall||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-rebuild||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rarian-sk-update||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
|-
|rasqal-config||[https://www.freebsd.org/cgi/man.cgi?query=rasqal-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rasqal-config]  -	 script	to get information about the installed version
of the RDF query	library
|-
|raw2hdf||[https://www.freebsd.org/cgi/man.cgi?query=raw2hdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html raw2hdf] -- Create an .hdf hard disk image from a	raw data file
|-
|raw2tiff||[https://www.freebsd.org/cgi/man.cgi?query=raw2tiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html raw2tiff]	- create a TIFF	file from a raw	data
|-
|ray||
|-
|rdfproc||The [https://www.freebsd.org/cgi/man.cgi?query=rdfproc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rdfproc] utility allows parsing, querying, manipulating and  serializing of	RDF content using the Redland RDF library.   The store-name is       a  Redland  store name, typically a short identifier.  The arguments to       command vary and	are explained in section COMMANDS below.
|-
|rdjpgcom||[https://www.freebsd.org/cgi/man.cgi?query=rdjpgcom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rdjpgcom] - display text comments	from a JPEG file
|-
|rdoc26||
|-
|readcd||[https://www.freebsd.org/cgi/man.cgi?query=readcd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html readcd] -	read or	write data Compact Discs or related madia

|-
|readelf||[https://www.freebsd.org/cgi/man.cgi?query=readelf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html readelf] --	display	information about ELF objects
|-
|readpix||
|-
|readpixels||
|-
|recode-sr-latin||[https://www.freebsd.org/cgi/man.cgi?query=recode-sr-latin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html recode-sr-latin] - convert Serbian text from Cyrillic to Latin script
|-
|redland-config||[https://www.freebsd.org/cgi/man.cgi?query=redland-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html redland-config]  - script	to get information about the installed version       of Redland
|-
|redland-db-upgrade||[https://www.freebsd.org/cgi/man.cgi?query=redland-db-upgrade&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html redland-db-upgrade] - upgrade older Redland databases to 0.9.12 format

|-
|refer||[https://www.freebsd.org/cgi/man.cgi?query=refer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html refer] - preprocess bibliographic	references for groff

|-
|refine||
|-
|reflect||
|-
|regdiff||[https://www.freebsd.org/cgi/man.cgi?query=regdiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regdiff] - Diff program for Windows registry files
|-
|registerRTSPStream||
|-
|regpatch||The [https://www.freebsd.org/cgi/man.cgi?query=regpatch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regpatch] utility applies registry patches to	Windows	registry       files. The patch	files should have the same format as is	being used by       the regdiff utility and regedit32.exe from Windows.       If no patch file	is specified on	the command line, regpatch attempts to       read it from standard input.
|-
|regshell||[https://www.freebsd.org/cgi/man.cgi?query=regshell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regshell] is a utility that lets you browse thru a Windows registry file       as if you were using a regular unix shell to browse thru	a file system.

|-
|regtree||The [https://www.freebsd.org/cgi/man.cgi?query=regtree&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regtree] utility prints out all the contents of a Windows registry       file. Subkeys are printed with one level	more indentation than their       parents.

|-
|renormal||
|-
|replace||The [https://www.freebsd.org/cgi/man.cgi?query=replace&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html replace] utility program changes strings in place in files or	on the       standard	input.
|-
|resgen||[https://www.freebsd.org/cgi/man.cgi?query=resgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resgen, resgen2] - Mono/CLI Resource Generator

|-
|resgen2||[https://www.freebsd.org/cgi/man.cgi?query=resgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resgen, resgen2] - Mono/CLI Resource Generator

|-
|resolve_stack_dump||[https://www.freebsd.org/cgi/man.cgi?query=resolve_stack_dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resolve_stack_dump] - resolve numeric stack trace	dump to	symbols
|-
|resolveip||[https://www.freebsd.org/cgi/man.cgi?query=resolveip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resolveip] - resolve host	name to	IP address or vice versa

|-
|revfix||
|-
|rhythmbox||[https://www.freebsd.org/cgi/man.cgi?query=rhythmbox&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rhythmbox] - music player	and library for	tagged files using GStreamer; rhythmbox  is  a	 very easy to use music	playing	and management program      which supports a	wide range of audio formats (including mp3  and	 ogg).       Originally  inspired  by	 Apple's iTunes, the current version also supports Internet Radio and	Last.fm	integration, iPod syncing and  generic      portable	audio player support. Audio CD playback, ripping and encoding,       music sharing, and Podcasts.
|-
|rhythmbox-client||[https://www.freebsd.org/cgi/man.cgi?query=rhythmbox-client&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports rhythmbox-client]	 is a tool for controlling an already running instance      of rhythmbox.  It's useful for remote control  scripting,  adding  specific  files  to	 the  library  from  the shell,	or printing details of       what's playing. It also has an interactive mode,	useful for controlling       playback	 remotely  via ssh. Any	files specified	after the option argu    ments will be added to the library.  If the --enqueue option is	given,       the files will also be added to the play	queue.

|-
|ri26||
|-
|roff2dvi||[https://www.freebsd.org/cgi/man.cgi?query=roff2dvi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2dvi] - transform roff code into dvi mode

|-
|roff2html||[https://www.freebsd.org/cgi/man.cgi?query=roff2html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2html] - transform roff code into html mode
|-
|roff2pdf||[https://www.freebsd.org/cgi/man.cgi?query=roff2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2pdf] - transform roff code into pdf mode

|-
|roff2ps||[https://www.freebsd.org/cgi/man.cgi?query=roff2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2ps] - transform roff	code into ps mode
|-
|roff2text||[https://www.freebsd.org/cgi/man.cgi?query=roff2text&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2text] - transform roff code into text mode

|-
|roff2x||[https://www.freebsd.org/cgi/man.cgi?query=roff2x&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2x] -	transform roff code into x mode

|-
|roqet||The [https://www.freebsd.org/cgi/man.cgi?query=roqet&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roqet] utility allows	querying of RDF	content	using the  Rasqal  RDF       query library, printing the results for variable	bindings, RDF graph or       boolean results in a variety of formats.	 The query is read from	query-URI  and	 the optional base-URI is used as the base URI of the query if       present.
|-
|rpcclient||[https://www.freebsd.org/cgi/man.cgi?query=rpcclient&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rpcclient] - tool	for executing client side MS-RPC functions

|-
|rsaperf||
|-
|rsvg-convert||[https://www.freebsd.org/cgi/man.cgi?query=rsvg-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rsvg-convert] - turn SVG files into raster images.
|-
|rsync||[https://www.freebsd.org/cgi/man.cgi?query=rsync&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rsync] - a fast, versatile, remote (and local) file-copying tool
|-
|ruby26||
|-
|run-with-aspell||[https://www.freebsd.org/cgi/man.cgi?query=run-with-aspell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html run-with-aspell] -  script to help use GNU Aspell as an ispell replacement
|-
|rvlc||
|-
|rzsh||
|-
|rzxcheck||[https://www.freebsd.org/cgi/man.cgi?query=rzxcheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rzxcheck] -- Check the signature in a ZX Spectrum	RZX file

|-
|rzxdump||[https://www.freebsd.org/cgi/man.cgi?query=rzxdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rzxdump] -- List contents	of Sinclair ZX Spectrum	input recording	files

|-
|rzxtool||[https://www.freebsd.org/cgi/man.cgi?query=rzxtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rzxtool] allows some simple modifications	to  be	made  to  Sinclair  ZX       Spectrum	 input	recording  files: blocks can be	removed, snapshot data       can be extracted	or snapshots can be inserted into the file.  The  file       can also	be uncompressed.
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content S===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|samba-ldbadd||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
|-
|samba-ldbdel||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
|-
|samba-ldbdump||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
|-
|samba-ldbedit||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
|-
|samba-ldbmodify||
|-
|samba-ldbrename||
|-
|samba-ldbsearch||
|-
|samba-regedit||[https://www.freebsd.org/cgi/man.cgi?query=samba-regedit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba-regedit] - ncurses based tool to manage the	Samba registry

|-
|samba-tool||[https://www.freebsd.org/cgi/man.cgi?query=samba-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba-tool] - Main Samba administration tool.
|-
|samplers||
|-
|samplers_array||
|-
|sancov80||
|-
|sane-config||[https://www.freebsd.org/cgi/man.cgi?query=sane-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sane-config] - get information about the installed version of libsane
|-
|sane-find-scanner||[https://www.freebsd.org/cgi/man.cgi?query=sane-find-scanner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sane-find-scanner]  is a command-line tool to find SCSI and USB scanners       and determine their Unix	device files. Its primary aim is to make  sure       that scanners can be detected by	SANE backends.
|-
|sapWatch||
|-
|scan-build80||
|-
|scan-view80||
|-
|scanadf||[https://www.freebsd.org/cgi/man.cgi?query=scanadf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scanadf] is a command-line interface to control  image  acquisition  devices which are capable of returning a series of	images (e.g. a scanner       with an automatic document feeder (ADF)).  The device is	controlled via       command-line  options.  After command-line processing, scanadf normally       proceeds	to acquire a series of images until  the  device  returns  the       SANE_STATUS_NO_DOCS status code
|-
|scanimage||[https://www.freebsd.org/cgi/man.cgi?query=scanimage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scanimage]  is a command-line interface to control image acquisition devices such as flatbed scanners or cameras.  The	device	is  controlled       via  command-line  options.   After  command-line processing, scanimage       normally	proceeds to acquire an image.  The image data  is  written  to       standard	 output	 in  one of the	PNM (portable aNyMaP) formats (PBM for       black-and-white images, PGM for grayscale images, and PPM for color images),  TIFF  format (black-and-white, grayscale	or color), PNG format,    or JPEG format.	scanimage accesses image acquisition  devices  through      the  SANE  (Scanner Access Now Easy) interface and can thus support any     device for which	there exists a SANE backend (try apropos sane- to  get     a list of available backends).
|-
|scanin||
|-
|sccmap||[https://www.freebsd.org/cgi/man.cgi?query=sccmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sccmap]  decomposes  digraphs  into strongly connected components	and an       auxiliary map of	the relationship between  components.	In  this  map,       each  component	is  collapsed  into  a node.  The resulting graphs are       printed to standard out.	 The number of nodes, edges and	strongly  connected  components  are	printed	to standard error.  sccmap is a	way of       partitioning large graphs into more manageable pieces.
|-
|scgcheck||[https://www.freebsd.org/cgi/man.cgi?query=scgcheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scgcheck] - check	and validate the ABI of	libscg
|-
|scl2trd||[https://www.freebsd.org/cgi/man.cgi?query=scl2trd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scl2trd] -- Convert .scl disk images to .trd.
|-
|scp-dbus-service||
|-
|sd2raw||
|-
|sd2svg||
|-
|sd2text||
|-
|sdc2csv||
|-
|sdl2-config||
|-
|sdl-config||
|-
|sdw2html||
|-
|secret-tool||[https://www.freebsd.org/cgi/man.cgi?query=secret-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html secret-tool] is a	command	line tool that can be used to store and     retrieve	passwords.
Each password is	stored in an item. Items are uniquely identified by a       set of attribute	keys and values. When storing a	password you must       specify unique pairs of attributes names	and values, and	when looking       up a password you provide the same attribute name and value pairs.
|-
|secutil||[https://www.freebsd.org/cgi/man.cgi?query=secutil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html secutil] - Extract X.509 certificates and	strongnames from assemblies.
|-
|setreg||[https://www.freebsd.org/cgi/man.cgi?query=setreg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html setreg] -	Change settings	for public key cryptography
|-
|setxkbmap||[https://www.freebsd.org/cgi/man.cgi?query=setxkbmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html setxkbmap] - set the keyboard using the X	Keyboard Extension

|-
|sexp-conv||
|-
|sfconvert||[https://www.freebsd.org/cgi/man.cgi?query=sfconvert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sfconvert] - convert audio files
|-
|sfinfo||[https://www.freebsd.org/cgi/man.cgi?query=sfinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sfinfo] -	display	information about audio	files

|-
|sgen||[https://www.freebsd.org/cgi/man.cgi?query=sgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sgen] - Mono XML Serializer GENerator

|-
|sgen-grep-binprot||
|-
|shadow_sampler||
|-
|shadowtex||
|-
|shape||The [https://www.freebsd.org/cgi/man.cgi?query=shape&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html shape] command is used to manipulate windows so as to	make them have       non-rectangular shapes.	It also	permits	the querying  of  the  current       status  of windows to see what shape they have.
|-
|sharedtex||
|-
|sharedtex_mt||
|-
|sharesec||[https://www.freebsd.org/cgi/man.cgi?query=sharesec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sharesec] - Set or get share ACLs. This tool is part of the	samba(7) suite.
|-
|shasum||[https://www.freebsd.org/cgi/man.cgi?query=shasum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html shasum] -	Print or Check SHA Checksums

|-
|shlibsign||
|-
|shotwell||[https://www.freebsd.org/cgi/man.cgi?query=shotwell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html shotwell]	- Digital photo	manager

|-
|showchar||
|-
|shtest||
|-
|signcode||[https://www.freebsd.org/cgi/man.cgi?query=signcode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html signcode]	- Digitally sign an PE executable using	an X.509 certificate.
|-
|signon-ui||
|-
|signond||
|-
|signonpluginprocess||
|-
|signtool||
|-
|signver||
|-
|simple-mtpfs||[https://www.freebsd.org/cgi/man.cgi?query=simple-mtpfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html SIMPLE-MTPFS] - filesystem driver	for MTP	based devices

|-
|simplex-noise||
|-
|singlebuffer||
|-
|sip-3.7||
|-
|size||[https://www.freebsd.org/cgi/man.cgi?query=size&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html size] -- display section sizes and total size of ELF objects

|-
|skinning||
|-
|smbcacls||[https://www.freebsd.org/cgi/man.cgi?query=smbcacls&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbcacls]	- Set or get ACLs on an	NT file	or directory names
This tool is part of the	samba(7) suite.
The smbcacls program manipulates	NT Access Control Lists	(ACLs) on SMB       file shares. An ACL is comprised	zero or	more Access Control Entries       (ACEs), which define access restrictions	for a specific user or group.
|-
|smbclient||[https://www.freebsd.org/cgi/man.cgi?query=smbclient&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbclient] - ftp-like client to access SMB/CIFS resources	on servers. This tool is part of the	samba(7) suite.     smbclient is a client that can 'talk' to	an SMB/CIFS server. It offers       an interface similar to that of the ftp program (see ftp(1)).       Operations include things like getting files from the server to the       local machine, putting files from the local machine to the server,       retrieving directory information	from the server	and so on.

|-
|smbcontrol||[https://www.freebsd.org/cgi/man.cgi?query=smbcontrol&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbcontrol] - send messages to smbd, nmbd	or winbindd processes
|-
|smbcquotas||[https://www.freebsd.org/cgi/man.cgi?query=smbcquotas&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbcquotas] - Set	or get QUOTAs of NTFS 5	shares. This tool is part of the	samba(7) suite.       The smbcquotas program manipulates NT Quotas on SMB file	shares.
|-
|smbget||[https://www.freebsd.org/cgi/man.cgi?query=smbget&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbget] -	wget-like utility for download files over SMB
|-
|smbpasswd||[https://www.freebsd.org/cgi/man.cgi?query=smbpasswd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbpasswd] - change a user's SMB password
|-
|smbspool||[https://www.freebsd.org/cgi/man.cgi?query=smbspool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbspool] - send a print file to an SMB printer
|-
|smbstatus||[https://www.freebsd.org/cgi/man.cgi?query=smbstatus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbstatus] - report on current Samba connections
|-
|smbtar||[https://www.freebsd.org/cgi/man.cgi?query=smbtar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbtar] -	shell script for backing up SMB/CIFS shares  irectly to	UNIX      tape drives
|-
|smbtorture||[https://www.freebsd.org/cgi/man.cgi?query=smbtorture&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbtorture] - Run	a series of tests against a SMB	server

|-
|smbtree||[https://www.freebsd.org/cgi/man.cgi?query=smbtree&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbtree] - A text	based smb network browser. smbtree is a smb	browser	program	in text	mode. It is similar to the       "Network	Neighborhood" found on Windows computers. It prints a tree       with all	the known domains, the servers in those	domains	and the	shares       on the servers.

|-
|sn||[https://www.freebsd.org/cgi/man.cgi?query=sn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sn] - Digitally sign/verify/compare strongnames on CLR assemblies.

|-
|snap2tzx||[https://www.freebsd.org/cgi/man.cgi?query=snap2tzx&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snap2tzx]	-- Convert ZX Spectrum snapshot	to .tzx	tape images
|-
|snapconv||[https://www.freebsd.org/cgi/man.cgi?query=snapconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snapconv] -- Sinclair ZX Spectrum	snapshot converter
|-
|snapdump||
|-
|sndfile-cmp||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-cmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-cmp] -- compare two	audio files
For two files to     compare as	being the same,	their channel counts, sample rate, audio data     lengths and actual	audio data must	match.	Other differences such as     string metadata like song title, artist etc and their presence or absence     are ignored.
|-
|sndfile-concat||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-concat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  sndfile-concat] -- concatenate audio data from two or more audio files; sndfile-concat generates a	new output file	by concatenating the audio
data of two or more input files. The encoding of the output file is the     encoding used in infile1.	Audio data from	the subsequent files are converted to this encoding.  The only	restriction is that the	files must     have the same number of channels.	The output file	is overwritten if it     already exists.
|-
|sndfile-convert||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-convert] --	convert	sound files from one format to another:
     wav    WAV	(Microsoft)
     aif    AIFF (Apple/SGI)
     au	    AU (Sun/NeXT)
     snd    AU (Sun/NeXT)
     raw    RAW	(header-less)
     gsm    RAW	(header-less)
     vox    RAW	(header-less)
     paf    PAF	(Ensoniq PARIS,	big-endian)
     fap    PAF	(Ensoniq PARIS,	little-endian)
     svx    IFF	(Amiga IFF/SVX8/SV16)
     nist   SPHERE (NIST SPeech	HEader Resources)
     sph    SPHERE (NIST SPeech	HEader Resources)
     voc    VOC	(Creative Labs)
     ircam  SF (Berkeley/IRCAM/CARL)
     sf	    SF (Berkeley/IRCAM/CARL)
     w64    W64	(SoundFoundry WAVE 64)
     mat    MAT4 (GNU Octave 2.0 / Matlab 4.2)
     mat4   MAT4 (GNU Octave 2.0 / Matlab 4.2)
     mat5   MAT5 (GNU Octave 2.1 / Matlab 5.0)
     pvf    PVF	(Portable Voice	Format)
     xi	    XI (FastTracker 2)
     htk    HTK	(HMM Tool Kit)
     sds    SDS	(Midi Sample Dump Standard)
     avr    AVR	(Audio Visual Research)
     wavex  WAVEX (MS WAVE with	WAVEFORMATEX)
     sd2    SD2	(Sound Designer	II)
     flac   FLAC (FLAC Lossless	Audio Codec)
     caf    CAF	(Apple Core Audio File)
     wve    WVE	(Psion Series 3)
     prc    WVE	(Psion Series 3)
     ogg    OGG	(OGG Container format)
     oga    OGG	(OGG Container format)
     mpc    MPC	(Akai MPC 2k)
     rf64   RF64 (RIFF 64)
|-
|sndfile-deinterleave||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-deinterleave&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-interleave, sndfile-deinterleave] -- convert mono files into a      multi-channel file	and vice versa
|-
|sndfile-info||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-info] -- display information about sound files
|-
|sndfile-interleave||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-deinterleave&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-interleave, sndfile-deinterleave] -- convert mono files into a      multi-channel file	and vice versa
|-
|sndfile-metadata-get||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-metadata-get&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-metadata-get, sndfile-metadata-set]	-- get or set metadata in a     sound file
|-
|sndfile-metadata-set||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-metadata-get&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-metadata-get, sndfile-metadata-set]	-- get or set metadata in a     sound file
|-
|sndfile-play||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-play&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-play] plays	one or more sound files	on various operating systems     using standard audio output APIs.
|-
|sndfile-resample||
|-
|sndfile-salvage||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-salvage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-salvage] --	salvage	audio data from	WAV files longer than 4G 
Audio files using the WAV file container are inherently limited to	4G of     data size fields in the WAV header	being stored as	unsigned 32bit integers.  Many applications have trouble with	these WAV files	that are more     the 4G in size.  sndfile-salvage rewrites the WAV file into a W64 file     with the same audio content.  This	file is	overwritten if it already exists.
|-
|sndiod||The [https://www.freebsd.org/cgi/man.cgi?query=sndiod&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndiod] daemon is an intermediate layer	between	audio or MIDI programs     and the hardware.	It performs the	necessary audio	processing to allow     any program to work on any	supported hardware.  By	default, sndiod	accepts connections from programs running on	the same system	only; it initializes only when	programs are using its services, allowing sndiod to     consume a negligible amount of system resources the rest of the time.     Systems with no audio hardware can	use sndiod to keep hot-pluggable devices usable by default at	virtually no cost.
|-
|snmp-bridge-mib||[https://www.freebsd.org/cgi/man.cgi?query=snmp-bridge-mib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmp-bridge-mib] - provide Linux bridge information via SNMP
|-
|snmpbulkget||[https://www.freebsd.org/cgi/man.cgi?query=snmpbulkget&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpbulkget] - communicates with a network entity	using SNMP GETBULK requests.
|-
|snmpbulkwalk||[https://www.freebsd.org/cgi/man.cgi?query=snmpbulkwalk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  snmpbulkwalk]  - retrieve	a subtree of management	values using SNMP GETBULK requests
|-
|snmpcheck||
|-
|snmpconf||[https://www.freebsd.org/cgi/man.cgi?query=snmpconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpconf]	- creates and modifies SNMP configuration files

snmpconf	 is  a	simple Perl script that	walks you through setting up a       configuration file step by step.	 It should be fairly straight  forward       to use.	Merely run it and answer its questions.
|-
|snmpdelta||[https://www.freebsd.org/cgi/man.cgi?query=snmpdelta&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpdelta] - Monitor delta differences in	SNMP Counter values

|-
|snmpdf||[https://www.freebsd.org/cgi/man.cgi?query=snmpdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpdf]  is  simply  a  networked	version	of the typical df command.  It       checks the disk space on	the remote machine by examining	 the  HOST-RE-      SOURCES-MIB's  hrStorageTable  or  the UCD-SNMP-MIB's dskTable.	By default, the hrStorageTable is preferred as it  typically	contains  more       information.   However,	the  -Cu  argument  can	be passed to snmpdf to       force the usage of the dskTable.
|-
|snmpget||[https://www.freebsd.org/cgi/man.cgi?query=snmpget&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpget]	is an SNMP application that uses the SNMP GET request to query       for information on a network entity.  One or  more  object  identifiers       (OIDs)  may  be	given as arguments on the command line.	 Each variable       name is given in	the format specified in	variables(5).
|-
|snmpgetnext||[https://www.freebsd.org/cgi/man.cgi?query=snmpgetnext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpgetnext] is an SNMP application that uses the	SNMP  GETNEXT  request       to query	for information	on a network entity.  One or more object identifiers (OIDs) may be given as arguments	on  the	 command  line.	  Each       variable	 name  is  given in the	format specified in variables(5).  For       each one, the variable that is lexicographically	"next" in  the	remote       entity's	MIB will be returned.

|-
|snmpnetstat||[https://www.freebsd.org/cgi/man.cgi?query=snmpnetstat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpnetstat]  -  display networking status and configuration information       from a network entity via SNMP
|-
|snmpset||[https://www.freebsd.org/cgi/man.cgi?query=snmpset&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpset]	is  an	SNMP application that uses the SNMP SET	request	to set       information on a	network	entity.	 One or	more object identifiers	(OIDs)       must  be	given as arguments on the command line.	 A type	and a value to       be set must accompany each object identifier.  Each  variable  name  is       given in	the format specified in	variables(5).
|-
|snmpstatus||[https://www.freebsd.org/cgi/man.cgi?query=snmpstatus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpstatus]  -  retrieves	 a  fixed set of management information	from a       network entity

|-
|snmptable||[https://www.freebsd.org/cgi/man.cgi?query=snmptable&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptable] - retrieve an SNMP table and display it in tabular form
|-
|snmptest||[https://www.freebsd.org/cgi/man.cgi?query=snmptest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptest	]- communicates with a network entity using SNMP	requests
|-
|snmptranslate||[https://www.freebsd.org/cgi/man.cgi?query=snmptranslate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptranslate]  -	 translate  MIB	 OID names between numeric and textual       forms
|-
|snmptrap||[https://www.freebsd.org/cgi/man.cgi?query=snmptrap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptrap, snmpinform] - sends an SNMP notification to a manager
|-
|snmpusm||[https://www.freebsd.org/cgi/man.cgi?query=snmpusm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpusm] - creates and maintains SNMPv3 users on a network entity
|-
|snmpvacm||[https://www.freebsd.org/cgi/man.cgi?query=snmpvacm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpvacm]  -  creates and	maintains SNMPv3 View-based Access Control entries on	a network entity
|-
|snmpwalk||[https://www.freebsd.org/cgi/man.cgi?query=snmpwalk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpwalk	] -  retrieve a subtree of management values using SNMP GETNEXT       requests

|-
|soapsuds||[https://www.freebsd.org/cgi/man.cgi?query=soapsuds&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html soapsuds]	- Mono's Remoting Proxy	Generator; soapsuds	is a tool for generating WSDL documents	and client proxies for       remoting	services.  A WSDL document describes the methods that  a  service  provides  together	with XML schemas of all	referenced data	structures. A	client proxy is	a class	which offers the same methods  as  the       service it represents, but provides no implementation, it just forwards       calls to	the remote service.
|-
|soelim||[https://www.freebsd.org/cgi/man.cgi?query=soelim&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html soelim] -- interpret .so requests in manpages

|-
|[[Software Station|software-station]]||Graphical interface to get software/packages from the GhostBSD repository
|-
|sol||[https://www.freebsd.org/cgi/man.cgi?query=sol&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sol, solscores] -	Solitaire card game
|-
|solid-hardware5||
|-
|spd-say||
|-
|spdsend||
|-
|spec2cie||
|-
|specplot||
|-
|spectex||
|-
|speech-dispatcher||
|-
|speexdec||[https://www.freebsd.org/cgi/man.cgi?query=speexdec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html speexdec]	- The reference	implementation speex decoder.
Decodes a Speex file and	produce	a WAV file or raw file
|-
|speexenc||[https://www.freebsd.org/cgi/man.cgi?query=speexenc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html speexenc] - The reference	implementation speex encoder.

|-
|spellout||
|-
|splain||[https://www.freebsd.org/cgi/man.cgi?query=splain&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html diagnostics, splain] - produce verbose warning diagnostics; This module extends the terse diagnostics normally emitted by both the       perl compiler and the perl interpreter (from running perl with a	-w       switch or "use warnings"), augmenting them with the more	explicative       and endearing descriptions found	in perldiag.  Like the other pragmata,       it affects the compilation phase	of your	program	rather than merely the       execution phase.

|-
|splitti3||
|-
|spotread||
|-
|spriteblast||
|-
|sqlite3||[https://www.freebsd.org/cgi/man.cgi?query=sqlite3&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sqlite3] - A command line	interface for SQLite version 3
|-
|sqlmetal||
|-
|sqlobject-admin||
|-
|sqlobject-convertOldURI||
|-
|sqlsharp||[https://www.freebsd.org/cgi/man.cgi?query=sqlsharp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sqlsharp] is a Mono SQL tool used	for entering SQL queries to a database      using Mono data providers.
|-
|srptool||[https://www.freebsd.org/cgi/man.cgi?query=srptool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html srptool] - GnuTLS	SRP tool; Simple  program	that emulates the programs in the Stanford SRP (Secure       Remote Password)	libraries using	GnuTLS.	 It is	intended  for  use  in       places  where  you  don't  expect SRP authentication to be the used for       system users.
|-
|ssltap||
|-
|start-pulseaudio-x11||[https://www.freebsd.org/cgi/man.cgi?query=start-pulseaudio-x11&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html start-pulseaudio-x11] - PulseAudio Sound Server X11 Startup Script; 
This  script  starts pulseaudio (if not already running)	and loads modules to publish access credentials to the PulseAudio server in the  X11       root  window  and to synthesize X11 media key events on cork/uncork requests. Additionally it registers PulseAudio to the  X11	 Session  Manager.
|-
|startx||[https://www.freebsd.org/cgi/man.cgi?query=startx&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html startx] -	initialize an X	session; The startx script is a front end	to [https://www.freebsd.org/cgi/man.cgi?query=xinit&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports xinit(1)] that provides  a  somewhat       nicer  user interface for running a single session of the X Window System.  It	is often run with no arguments.
|-
|station-tweak||
|-
|stex3d||
|-
|strings||[https://www.freebsd.org/cgi/man.cgi?query=strings&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html strings] --	print the strings of printable characters in files; 
For each file specified, the strings utility prints contiguous sequences     of	printable characters that are at least n characters long and are followed by an unprintable character.	 The default value of n	is 4.  By default, the	strings	utility	only scans the initialized and loaded sections     of	ELF objects; for other file types, the entire file is scanned.	The     strings utility is	mainly used for	determining the	contents of non-text     files.

|-
|strip||[https://www.freebsd.org/cgi/man.cgi?query=strip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html strip] -- discard information from ELF objects; The strip utility is used to discard information from the ELF objects    specified by the arguments	file ....     If	an explicit output file	name is	not specified using the	-o option, the     strip utility will	modify its input arguments in-place.
|-
|strsclnt||
|-
|sub-tex||
|-
|substrings.pl||
|-
|sudo||[https://www.freebsd.org/cgi/man.cgi?query=sudo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sudo, sudoedit] -- execute a command as another user
sudo allows a permitted user to execute a command as the superuser	or another user, as specified by the security policy.  The invoking user's     real (not effective) user ID is used to determine the user	name with     which to query the	security policy.
|-
|sudoreplay||[https://www.freebsd.org/cgi/man.cgi?query=sudoreplay&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sudoreplay]	-- replay sudo session logs
sudoreplay	plays back or lists the	output logs created by sudo.  When replaying, sudoreplay can play the session back in real-time, or the	playback speed	may be adjusted	(faster	or slower) based on the	command	line     options.
|-
|svcutil||
|-
|svn||[https://www.freebsd.org/cgi/man.cgi?query=svn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svn] - Subversion	command	line client tool;
Subversion  is  a  version control system, which	allows you to keep old      versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Suversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
|-
|svn-mergeinfo-normalizer||
|-
|svn-populate-node-origins-index||
|-
|svnadmin||[https://www.freebsd.org/cgi/man.cgi?query=svnadmin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnadmin] - Subversion repository	administration tool
Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
|-
|svnauthz||
|-
|svnauthz-validate||
|-
|svnbench||
|-
|svnconflict||
|-
|svndiff||
|-
|svndiff3||
|-
|svndiff4||
|-
|svndumpfilter||[https://www.freebsd.org/cgi/man.cgi?query=svndumpfilter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svndumpfilter] - Filter a	subversion repository 'dumpfile'.
Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
|-
|svnfsfs||
|-
|svnlook||[https://www.freebsd.org/cgi/man.cgi?query=svnlook&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnlook] - Subversion repository examination tool
Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
|-
|svnmover||
|-
|svnmucc||[https://www.freebsd.org/cgi/man.cgi?query=svnmucc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnmucc] - Multiple URL Command Client for Subversion
Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
|-
|svnraisetreeconflict||
|-
|svnrdump||[https://www.freebsd.org/cgi/man.cgi?query=svnrdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnrdump]	- Subversion remote repository dumper and loader
|-
|svnserve||[https://www.freebsd.org/cgi/man.cgi?query=svnserve&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnserve] - Server for the 'svn' repository access method;
svnserve	allows access to Subversion repositories using the svn network       protocol.  It can both run as a standalone server process,  or  it  can       run  out	 of inetd.  You	must choose a mode of operation	when you start       svnserve.
|-
|svnsync||[https://www.freebsd.org/cgi/man.cgi?query=svnsync&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnsync] - Subversion repository synchronization tool

|-
|svnversion||[https://www.freebsd.org/cgi/man.cgi?query=svnversion&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnversion] - Produce a compact version identifier for a working copy.

|-
|swapbuffers||
|-
|swell-foop||
|-
|sxpm||[https://www.freebsd.org/cgi/man.cgi?query=sxpm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sxpm]  -	Show an	XPM (X PixMap) file and/or convert XPM 1 or 2 files to       XPM 3.
The  sxpm program can be	used to	view any XPM (version 1, 2, or 3) file       and/or to convert a file	from XPM1 or XPM2 to XPM version 3. If sxpm is       run  with any dummy option specified, the usage is displayed. If	no geometry is specified, the	show window will have the  size	 of  the  read       pixmap. Pressing	the key	Q in the window	will quit the program.

|-
|symcryptrun||[https://www.freebsd.org/cgi/man.cgi?query=symcryptrun&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  symcryptrun] - Call a simple symmetric encryption	tool; Sometimes simple	encryption tools are already in	use for	 a  long  time       and there might be a desire to integrate	them into the GnuPG framework.       The protocols and encryption methods might be non-standard or not  even       properly	documented, so that a full-fledged encryption tool with	an interface like gpg	is not doable.	symcryptrun provides  a	 solution:  It       operates	 by calling the	external encryption/decryption module and provides a passphrase for a	key using the standard pinentry	 based	mechanism through gpg-agent.
|-
|symkeyutil||
|-
|synclient||[https://www.freebsd.org/cgi/man.cgi?query=synclient&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html synclient]  -  commandline  utility to query and modify Synaptics	driver       options.
This program  lets  you	change	your  Synaptics	 TouchPad  driver  for       XOrg/XFree86 server parameters while X is running.

|-
|syndaemon||[https://www.freebsd.org/cgi/man.cgi?query=syndaemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html syndaemon]  - a program that monitors keyboard activity and disables the      touchpad	when the keyboard is being used.
|-
|synthcal||
|-
|synthread||
|-
|system-config-printer||[https://www.freebsd.org/cgi/man.cgi?query=system-config-printer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html system-config-printer] - configure a CUPS	server
system-config-printer configures	a CUPS server. It uses the CUPS	API       (bound to Python	with pycups) to	do this. The communication with	the       server is performed using IPP. As a result, it is equally able to       configure a remote CUPS server as a local one.
|-
|system-config-printer-applet||[https://www.freebsd.org/cgi/man.cgi?query=system-config-printer-applet&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html system-config-printer-applet] - print job	manager; 
system-config-printer-applet is a print job manager for CUPS. Normally       it will display a printer icon in the notification area,	greyed out       when there are no print jobs for	the current user. Clicking on the icon       displays	a simple print job manager for cancelling or reprinting	jobs.
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content T===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|taglib-config||
|-
|tali||[https://www.freebsd.org/cgi/man.cgi?query=tali&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tali] - A	variation on poker with	dice and less money.
GNOME  Tali is a	sort of	poker with dice	and less money.	 You roll five       dice three times	and try	to create the best hand. Your two rerolls  may       include any or all of your dice.
|-
|tape2pulses||[https://www.freebsd.org/cgi/man.cgi?query=tape2pulses&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tape2pulses] -- Sinclair ZX Spectrum tape	pulse dumper;
tape2pulses dumps the pulse information from ZX Spectrum	tape images to       text files.
|-
|tape2wav||[https://www.freebsd.org/cgi/man.cgi?query=tape2wav&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tape2wav]	-- Sinclair ZX Spectrum	tape to	wav audio file converter

|-
|tapeconv||[https://www.freebsd.org/cgi/man.cgi?query=tapeconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tapeconv] -- Sinclair ZX Spectrum	tape file converter

|-
|targen||
|-
|tbl||[https://www.freebsd.org/cgi/man.cgi?query=tbl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tbl] - format tables for troff
This manual page	describes the GNU version of tbl, which	is part	of the       groff document formatting system.  tbl compiles descriptions of	tables       embedded	 within	troff input files into commands	that are understood by       troff.  Normally, it should be invoked using the	-t  option  of	groff.       It is highly compatible with Unix tbl.  The output generated by GNU tbl       cannot be processed with	Unix troff; it	must  be  processed  with  GNU       troff.	If  no files are given on the command line, the	standard input       will be read.  A	filename of - will cause  the  standard	 input	to  be       read.
|-
|tclsh8.5||
|-
|tclsh8.6||
|-
|tdbbackup||[https://www.freebsd.org/cgi/man.cgi?query=tdbbackup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbbackup] - tool	for backing up and for validating the integrity	of       samba .tdb files

|-
|tdbdump||[https://www.freebsd.org/cgi/man.cgi?query=tdbdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbdump] - tool for printing the contents	of a TDB file

|-
|tdbrestore||[https://www.freebsd.org/cgi/man.cgi?query=tdbrestore&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbrestore] - tool for creating a	TDB file out of	a tdbdump output; This tool is part of the	samba(1) suite.       tdbrestore is a very simple utility that	'restores' the contents	of       dump file into TDB (Trivial DataBase) file. The dump file is obtained       from the	tdbdump	command.
|-
|tdbtool||[https://www.freebsd.org/cgi/man.cgi?query=tdbtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbtool] - manipulate the	contents TDB files;
This tool is part of the	samba(1) suite.       tdbtool a tool for displaying and altering the contents of Samba	TDB       (Trivial	DataBase) files. Each of the commands listed below can be
entered interactively or	provided on the	command	line.
|-
|teapot||[https://www.freebsd.org/cgi/man.cgi?query=teapot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html teapot] -- Table Editor And	Planner, Or: Teapot!
teapot (Table Editor And Planner, Or Teapot!) is a	compact	spreadsheet     program, featuring	three dimensions with linear addressing, relative references, formula references, type safety of computations, iterative expressions and platform independent	file format.
|-
|telegram-desktop||[https://desktop.telegram.org/ telegram-desktop] Telegram is a cloud-based mobile and desktop messaging app with a focus on security and speed. 
|-
|terrain||The [https://www.freebsd.org/cgi/man.cgi?query=terrain&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html terrain] program produces pseudo-terrain from	procedural noise       suitable	for use	with a BRL-CAD dsp primitive. Noise values are       computed	for the	grid points of the lattice and the resultant values       are output on the standard output as unsigned shorts in network byte       order. The size of the grid is specified	with the -w and	-n options.

|-
|tessdemo||
|-
|test_chmLib||
|-
|testAMRAudioStreamer||
|-
|testDVVideoStreamer||
|-
|testH264VideoStreamer||
|-
|testH264VideoToHLSSegments||
|-
|testH264VideoToTransportStream||
|-
|testH265VideoStreamer||
|-
|testH265VideoToTransportStream||
|-
|testMKVSplitter||
|-
|testMKVStreamer||
|-
|testMP3Receiver||
|-
|testMP3Streamer||
|-
|testMPEG1or2AudioVideoStreamer||
|-
|testMPEG1or2ProgramToTransportStream||
|-
|testMPEG1or2Splitter||
|-
|testMPEG1or2VideoReceiver||
|-
|testMPEG1or2VideoStreamer||
|-
|testMPEG2TransportReceiver||
|-
|testMPEG2TransportStreamer||
|-
|testMPEG2TransportStreamSplitter||
|-
|testMPEG2TransportStreamTrickPlay||
|-
|testMPEG4VideoStreamer||
|-
|testOggStreamer||
|-
|testOnDemandRTSPServer||
|-
|testparm||
|-
|testpattern||
|-
|testRelay||
|-
|testReplicator||
|-
|testRTSPClient||
|-
|testWAVAudioStreamer||
|-
|tex-quads||
|-
|texaaline||
|-
|texcyl||
|-
|texdemo1||
|-
|texenv||
|-
|teximage||
|-
|texture_from_pixmap||
|-
|textures||
|-
|tfmtodit||[https://www.freebsd.org/cgi/man.cgi?query=tfmtodit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tfmtodit] creates	a font file for	use with groff -Tdvi.  tfm_file	is the       name of the TeX font metric file	for the	font.  map_file	is a file giving the groff names for characters in the font;
|-
|th_gen_idx.pl||
|-
|thunar||[https://docs.xfce.org/xfce/thunar/start Thunar] File Manager
|-
|thunar-settings||
|-
|tiff2bw||[https://www.freebsd.org/cgi/man.cgi?query=tiff2bw&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiff2bw] converts an RGB	or Palette color TIFF image to a greyscale image by combining	percentages of the red,	green, and blue	channels.   By       default,	 output	 samples are created by	taking 28% of the red channel,       59% of the green	channel, and 11% of the	blue channel.  To alter	 these       percentages, the	-R, -G,	and -B options may be used.
|-
|tiff2pdf||[https://www.freebsd.org/cgi/man.cgi?query=tiff2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiff2pdf] opens a TIFF image and	writes a PDF document to standard output.
The program converts one	TIFF file to one PDF file, including  multiple       page  TIFF  files,  tiled  TIFF	files, black and white.	grayscale, and       color TIFF files	that contain data of TIFF photometric  interpretations       of  bilevel,  grayscale,	RGB, YCbCr, CMYK separation, and ICC L*a*b* as       supported by libtiff and	PDF.
|-
|tiff2ps||[https://www.freebsd.org/cgi/man.cgi?query=tiff2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiff2ps] - convert a TIFF	image to PostScripttm

|-
|tiff2rgba||[https://www.freebsd.org/cgi/man.cgi?query=tiff2rgba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiff2rgba]  converts a wide variety of TIFF images into an RGBA TIFF image.  This includes the ability to translate different color spaces and       photometric  interpretation  into RGBA, support for alpha blending, and       translation of many different bit depths	into a 32bit RGBA image.
|-
|tiffcmp||[https://www.freebsd.org/cgi/man.cgi?query=tiffcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiffcmp] compares  the  tags and	data in	two files created according to       the Tagged Image	File Format, Revision 6.0.  The	schemes	used for  compressing	 data  in each file are	immaterial when	data are compared-data       are compared on a scanline-by-scanline basis after decompression.
|-
|tiffcp||[https://www.freebsd.org/cgi/man.cgi?query=tiffcp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffcp]  combines	 one  or more files created according to the Tag Image       File Format, Revision 6.0 into a	single TIFF file.  Because the	output       file  may  be  compressed  using	 a  different algorithm	than the input       files, tiffcp is	most often used	to convert between different  compression schemes.
|-
|tiffcrop||[https://www.freebsd.org/cgi/man.cgi?query=tiffcrop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiffcrop] processes one or more files created according to the Tag Image       File Format, Revision 6.0, specification	into one or more TIFF file(s).       Tiffcrop	is most	often used to extract portions of an  image  for  processing	with  bar  code	 recognizer or OCR software when that software       cannot restrict the region of interest to a specific portion of the image  or	to improve efficiency when the regions of interest must	be rotated.  It can also be used to subdivide	all or part of a processed image  into  smaller sections and export individual images	or sections of       images as separate files	or separate images within one  or  more	 files       derived from the	original input image or	images.

|-
|tiffdiff||
|-
|tiffdither||[https://www.freebsd.org/cgi/man.cgi?query=tiffdither&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffdither] - convert a greyscale	image to bilevel using dithering

|-
|tiffdump||[https://www.freebsd.org/cgi/man.cgi?query=tiffdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffdump]	- print	verbatim information about TIFF	files

|-
|tiffgamut||
|-
|tifficc||[https://www.freebsd.org/cgi/man.cgi?query=tifficc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tifficc] - little	cms ICC	profile	applier	for TIFF.
lcms is a standalone CMM	engine,	which deals with the color management.       It implements a fast transformation between ICC profiles.   tifficc  is       little cms ICC profile applier for TIFF.
|-
|tiffinfo||[https://www.freebsd.org/cgi/man.cgi?query=tiffinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffinfo] - print	information about TIFF files;
Tiffinfo	 displays information about files created according to the Tag       Image File Format, Revision 6.0.	 By default, the contents of each TIFF       directory  in  each file	is displayed, with the value of	each tag shown       symbolically (where sensible).
|-
|tiffmedian||[https://www.freebsd.org/cgi/man.cgi?query=tiffmedian&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffmedian]  applies  the	 median	 cut  algorithm	to an RGB image	in input.tif to generate a palette image that	is written to output.tif.  The       generated  colormap  has,  by  default, 256 entries.  The image data is       quantized by mapping each pixel to the closest color values in the colormap.
|-
|tiffset||[https://www.freebsd.org/cgi/man.cgi?query=tiffset&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiffset] sets the	value of a TIFF	header to a specified value or removes       an existing setting.

|-
|tiffsplit||[https://www.freebsd.org/cgi/man.cgi?query=tiffsplit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffsplit]  takes	 a multi-directory (page) TIFF file and	creates	one or       more single-directory (page) TIFF files from it.	 The output files  are       given names created by concatenating a prefix, a	lexically ordered suffix in the range	[aaa-zzz], the suffix .tif (e.g.  xaaa.tif,  xaab.tif, ...,  xzzz.tif).	 If a prefix is	not specified on the command line, the default prefix of x is used.
|-
|tificc||[https://www.freebsd.org/cgi/man.cgi?query=tificc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tificc] -	little cms ICC profile applier for TIFF.

|-
|timage||
|-
|toc2cddb||[https://www.freebsd.org/cgi/man.cgi?query=toc2cddb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html toc2cddb] -  translates	a  TOC	file of	cdrdao(1) into a cddb file and       prints it to stdout
|-
|toc2cue||[https://www.freebsd.org/cgi/man.cgi?query=toc2cue&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html toc2cue] - converts a TOC	files of cdrdao(1) into	a .cue file
|-
|toFloat||
|-
|tomboy||[https://www.freebsd.org/cgi/man.cgi?query=tomboy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tomboy]  is a desktop note-taking	application for	Linux and Unix.	Simple       and easy	to use,	but with potential to help you organize	the ideas  and       information you deal with every day.

|-
|touchpad-edge-detector||
|-
|toyball||
|-
|tpmd||
|-
|tpmtool||[https://www.freebsd.org/cgi/man.cgi?query=tpmtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tpmtool] - GnuTLS	TPM tool; Program that allows handling cryptographic data from the	TPM chip.
|-
|tracker||
|-
|transicc||[https://www.freebsd.org/cgi/man.cgi?query=transicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html transicc] - little cms ColorSpace	conversion calculator.
|-
|transmission-gtk||[https://www.freebsd.org/cgi/man.cgi?query=transmission-gtk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html transmission-gtk] is a fast	and easy BitTorrent client.     BitTorrent	is a peer-to-peer file transfer	protocol which uses a metainfo     file (usually with	the .torrent file extension) and a central tracker to     distribute	file data amongst a group of peers. For	more information on     the BitTorrent protocol see [http://www.bittorrent.org/ BitTorrent]

|-
|transpose-freecell-board.py||[https://www.freebsd.org/cgi/man.cgi?query=transpose-freecell-board.py&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html transpose-freecell-board.py] - transpose a Freecell/etc. layout from  play-stacks in text-columns to play-stacks in text lines.

|-
|traptoemail||[https://www.freebsd.org/cgi/man.cgi?query=traptoemail&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html traptoemail]  -  snmptrapd  handler  script  to  convert snmp traps into       emails
|-
|tred||[https://www.freebsd.org/cgi/man.cgi?query=tred&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tred]  computes  the transitive reduction	of directed graphs, and	prints       the resulting graphs to standard	output.	 This removes edges implied by       transitivity.   Nodes  and  subgraphs  are not otherwise	affected.  The       ``meaning'' and validity	of the reduced graphs  is  application	dependent.   tred  is	particularly useful as a preprocessor to dot to	reduce       clutter in dense	layouts.
|-
|tri||
|-
|tri-2101010||
|-
|tri-2101010-dlist||
|-
|tri-alpha||
|-
|tri-alpha-tex||
|-
|tri-array-interleaved||
|-
|tri-blend||
|-
|tri-blend-color||
|-
|tri-blend-max||
|-
|tri-blend-min||
|-
|tri-blend-revsub||
|-
|tri-blend-sub||
|-
|tri-clear||
|-
|tri-clip||
|-
|tri-cull||
|-
|tri-cull-both||
|-
|tri-dlist||
|-
|tri-edgeflag||
|-
|tri-edgeflag-array||
|-
|tri-edgeflag-pv||
|-
|tri-fbo||
|-
|tri-fbo-tex||
|-
|tri-fbo-tex-mip||
|-
|tri-flat||
|-
|tri-flat-clip||
|-
|tri-fog||
|-
|tri-fp||
|-
|tri-fp-const-imm||
|-
|tri-lit||
|-
|tri-lit-material||
|-
|tri-logicop-none||
|-
|tri-logicop-xor||
|-
|tri-mask-tri||
|-
|tri-multitex-vbo||
|-
|tri-orig||
|-
|tri-point-line-clipped||
|-
|tri-query||
|-
|tri-repeat||
|-
|tri-rotate||
|-
|tri-scissor-tri||
|-
|tri-square||
|-
|tri-stencil||
|-
|tri-stipple||
|-
|tri-tex||
|-
|tri-tex-1d||
|-
|tri-tex-3d||
|-
|tri-tex-stipple||
|-
|tri-tri||
|-
|tri-unfilled||
|-
|tri-unfilled-clip||
|-
|tri-unfilled-edgeflag||
|-
|tri-unfilled-fog||
|-
|tri-unfilled-point||
|-
|tri-unfilled-smooth||
|-
|tri-unfilled-tri||
|-
|tri-unfilled-tri-lit||
|-
|tri-unfilled-userclip||
|-
|tri-unfilled-userclip-stip||
|-
|tri-userclip||
|-
|tri-viewport||
|-
|tri-z||
|-
|tri-z-9||
|-
|tri-z-clip||
|-
|tri-z-eq||
|-
|trifan||
|-
|trifan-flat||
|-
|trifan-flat-clip||
|-
|trifan-flat-unfilled-clip||
|-
|trifan-unfilled||
|-
|trirast||
|-
|trispd||
|-
|tristrip||
|-
|tristrip-clip||
|-
|tristrip-flat||
|-
|troff||[https://www.freebsd.org/cgi/man.cgi?query=troff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html troff] - the troff processor of the groff	text formatting	system
|-
|trust||
|-
|ttfread||
|-
|tunnel||
|-
|tunnel2||
|-
|twolame||[https://www.freebsd.org/cgi/man.cgi?query=twolame&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html twolame] - an optimised MPEG Audio Layer 2 (MP2) encoder
|-
|twoside||
|-
|txt2ti3||
|-
|tzxlist||[https://www.freebsd.org/cgi/man.cgi?query=tzxlist&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tzxlist] -- Sinclair ZX Spectrum "real" tape file	lister

|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content U===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|uchardet||[https://www.freebsd.org/cgi/man.cgi?query=uchardet&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uchardet]	- universalchardet (Universal Charset Detector)

|-
|uconv||[https://www.freebsd.org/cgi/man.cgi?query=uconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uconv] - convert data from one encoding to another
uconv converts, or transcodes, each given file (or its  standard	 input       if no file is specified)	from one encoding to another.  The transcoding       is done using Unicode as	a pivot	encoding  (i.e.	 the  data  are	 first       transcoded  from	their original encoding	to Unicode, and	then from Unicode to the destination encoding).
|-
|umax_pp||
|-
|unflatten||[https://www.freebsd.org/cgi/man.cgi?query=unflatten&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unflatten] - adjust directed graphs to improve layout aspect ratio

|-
|unix-lpr.sh||
|-
|unmunch||
|-
|unopkg||[https://www.freebsd.org/cgi/man.cgi?query=unopkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unopkg] -	LibreOffice Extension Manager;  LibreOffice is a	fully featured office suite for	the daily use with all       features	you would normally expect in an	office suite.
|-
|unzip||[https://www.freebsd.org/cgi/man.cgi?query=unzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unzip] -- extract files from a ZIP archive
|-
|unzipsfx||[https://www.freebsd.org/cgi/man.cgi?query=unzipsfx&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unzipsfx]	- self-extracting stub for prepending to ZIP archives
|-
|update-alternatives||[https://www.freebsd.org/cgi/man.cgi?query=update-alternatives&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html update-alternatives]  -  maintain	 symbolic  links  determining  default       commands
|-
|update-desktop-database||[https://www.freebsd.org/cgi/man.cgi?query=update-desktop-database&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html update-desktop-database] - Build cache database of MIME types handled by     desktop files

|-
|update-mime-database||[https://www.freebsd.org/cgi/man.cgi?query=update-mime-database&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html update-mime-database] - a	program	to build the Shared MIME-Info database
cache

|-
|update-qtchooser-wrapper||
|-
|[[Update Station|update-station]]||GhostBSD graphical package update manager
|-
|upnpc||
|-
|upower||[https://www.freebsd.org/cgi/man.cgi?query=upower&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html upower] -	UPower command line tool
upower is a simple command line client for the UPower(7)	daemon.	TODO:       not fully documented.

|-
|utp_recv||
|-
|utp_send||
|-
|utp_test||
|-
|uuidgen||[https://www.freebsd.org/cgi/man.cgi?query=uuidgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uuidgen] --	generate universally unique identifiers;
The uuidgen utility by default generates a	single DCE version 1 universally unique identifier (UUID), also known	as a globally unique identifier (GUID).  The UUID is written to stdout by default. 
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content V===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|vala-gen-introspect-0.40||
|-
|valac-0.40||[https://www.freebsd.org/cgi/man.cgi?query=valac&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html valac]  -	 compiler  that	 translates Vala source	code into C source and       header files

|-
|valadoc-0.40||
|-
|vao_demo||
|-
|vapigen-0.40||[https://www.freebsd.org/cgi/man.cgi?query=vapigen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vapigen] - generate a Vala API
|-
|vbc||
|-
|vbo||
|-
|vbo-drawarrays||
|-
|vbo-drawarrays-2101010||
|-
|vbo-drawelements||
|-
|vbo-drawrange||
|-
|vbo-noninterleaved||
|-
|vbo-tri||
|-
|vboxtool||[https://www.freshports.org/emulators/vboxtool vboxtool] provides effective control of VirtualBox machines
|-
|vert-or-frag-only||
|-
|vert-tex||
|-
|vertexrate||
|-
|vfstest||[https://www.freebsd.org/cgi/man.cgi?query=vfstest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vfstest] - tool for testing samba	VFS modules

|-
|vfychain||
|-
|vfyserv||
|-
|viewgam||
|-
|vim||[https://www.freebsd.org/cgi/man.cgi?query=vim&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vim] - Vi	IMproved, a programmers	text editor
Vim  is a text editor that is upwards compatible	to Vi.	It can be used       to edit all kinds of plain text.	 It is especially useful  for  editing       programs
|-
|vimdot||[https://www.freebsd.org/cgi/man.cgi?query=vimdot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vimdot] -	Combined text editor and dot viewer
vimdot  is  a simple script which launches the gvim or vim editor along       with a GUI window showing the dot output	of the edited file.   The  dot       output  window  automatically  refreshes	everytime the file is saved in       the editor.
|-
|vimtutor||[https://www.freebsd.org/cgi/man.cgi?query=vimtutor Vimtutor]	starts the Vim tutor.  It copies the tutor file	first, so that       it can be modified without changing the original	file.       The Vimtutor is useful for people that want to learn  their  first  Vim       commands.
|-
|visualinfo||
|-
|[https://www.videolan.org/vlc/index.de.html vlc]||[https://www.freebsd.org/cgi/man.cgi?query=vlc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vlc, qvlc, svlc,	nvlc, rvlc, cvlc] - the VLC media player

|-
|vlc-wrapper||[https://www.freebsd.org/cgi/man.cgi?query=vlc-wrapper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vlc-wrapper] - a wrapper to drop privileges with VLC
|-
|vmmouse_detect||[https://www.freebsd.org/cgi/man.cgi?query=vmmouse_detect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vmmouse_detect]  is a tool for detecting if running in a VMware environment where vmmouse is used.  It exits with a 0 return value if the  vmmouse client is enabled,	and 1 if not.
|-
|vobStreamer||[http://www.live555.com/vobStreamer/ vobStreamerTM] - a network DVD player application
|-
|vp-array||
|-
|vp-array-hf||
|-
|vp-array-int||
|-
|vp-clip||
|-
|vp-line-clip||
|-
|vp-tri||
|-
|vp-tri-cb||
|-
|vp-tri-cb-pos||
|-
|vp-tri-cb-tex||
|-
|vp-tri-imm||
|-
|vp-tri-invariant||
|-
|vp-tri-swap||
|-
|vp-tri-tex||
|-
|vp-unfilled||
|-
|vpxdec||
|-
|vpxenc||
|-
|vsd2raw||
|-
|vsd2text||
|-
|vsd2xhtml||
|-
|vsraytrace||
|-
|vss2raw||
|-
|vss2text||
|-
|vss2xhtml||
|-
|vte||The [https://www.freebsd.org/cgi/man.cgi?query=vte&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vte] device driver provides support for	RDC R6040 Fast Ethernet	controller which is commonly found on	Vortex86 System	On a Chip (SoC).
|-
|vte-2.91||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content W===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|wasm-ld80||
|-
|watchgnupg||[https://www.freebsd.org/cgi/man.cgi?query=watchgnupg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html watchgnupg] - Read and print logs	from a socket; 
Most  of	the main utilities are able to write their log files to	a Unix       Domain socket if	configured that	way.  watchgnupg is a simple  listener       for  such  a  socket.   It ameliorates the output with a	time stamp and       makes sure that long lines are not interspersed with  log  output  from       other utilities.	 This tool is not available for	Windows.
|-
|wayland-scanner||
|-
|wbinfo||[https://www.freebsd.org/cgi/man.cgi?query=wbinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wbinfo] -	Query information from winbind daemon
|-
|WebKitWebDriver||
|-
|webpinfo||
|-
|webpmux||[https://www.freebsd.org/cgi/man.cgi?query=webpmux&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html webpmux] - create	animated WebP files from non-animated WebP images, extract frames from animated WebP images, and  manage  XMP/EXIF  metadata     and ICC profile.
|-
|webpng||
|-
|wincopy||
|-
|winpos||
|-
|wish8.5||
|-
|wish8.6||
|-
|wks2csv||
|-
|wks2raw||
|-
|wks2text||
|-
|wmctrl||[https://www.freebsd.org/cgi/man.cgi?query=wmctrl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wmctrl] -	interact with a	EWMH/NetWM compatible X	Window Manager.
wmctrl  is a command that can be	used to	interact with an X Window manager that is compatible with the	EWMH/NetWM specification.  wmctrl  can       query  the window manager for information, and it can request that certain window management actions be taken.
|-
|wmf2eps||
|-
|wmf2fig||
|-
|wmf2gd||
|-
|wmf2svg||
|-
|wmf2x||
|-
|woff2_compress||
|-
|woff2_decompress||
|-
|woff2_info||
|-
|word-list-compress||[https://www.freebsd.org/cgi/man.cgi?query=word-list-compress&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html word-list-compress] compresses or	decompresses sorted word lists for use       with the	GNU Aspell spell checker.
 
|-
|wordforms||
|-
|wordlist2hunspell||
|-
|wpd2html||
|-
|wpd2raw||
|-
|wpd2text||
|-
|wpg2raw||
|-
|wpg2svg||
|-
|wpg2svgbatch.pl||
|-
|wps2html||
|-
|wps2raw||
|-
|wps2text||
|-
|wrjpgcom||[https://www.freebsd.org/cgi/man.cgi?query=wrjpgcom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wrjpgcom] reads	the  named JPEG/JFIF file, or the standard input if no     file is named, and generates a new JPEG/JFIF file on  standard  output.       A comment block is added	to the file.

|-
|wsdl||[https://www.freebsd.org/cgi/man.cgi?query=wsdl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wsdl]  is	a tool for generating proxy classes that can be	used to	access       to web services.	 The tool reads	a WSDL document	from the provided path       or  url,	 and  downloads	 referenced schemas or other WSDL documents if       needed.

|-
|wsdl2||[https://www.freebsd.org/cgi/man.cgi?query=wsdl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wsdl]  is	a tool for generating proxy classes that can be	used to	access       to web services.	 The tool reads	a WSDL document	from the provided path       or  url,	 and  downloads	 referenced schemas or other WSDL documents if       needed.
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content X===
{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|x86_64-portbld-freebsd12.1-c++9||
|-
|x86_64-portbld-freebsd12.1-g++9||
|-
|x86_64-portbld-freebsd12.1-gcc9||
|-
|x86_64-portbld-freebsd12.1-gcc-9.3.0||
|-
|x86_64-portbld-freebsd12.1-gcc-ar9||
|-
|x86_64-portbld-freebsd12.1-gcc-nm9||
|-
|x86_64-portbld-freebsd12.1-gcc-ranlib9||
|-
|x86_64-portbld-freebsd12.1-gfortran9||
|-
|x265||
|-
|x509-parser||
|-
|xauth||The [https://www.freebsd.org/cgi/man.cgi?query=xauth&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  xauth] program is used to edit and display the authorization	information used in connecting to the	X server.   This  program  is  usually       used  to	 extract authorization records from one	machine	and merge them       in on another (as is the	case when using	remote logins or granting  access to other users).  Commands (described below) may be	entered	interactively, on the	xauth command line, or in  scripts.   Note  that  this       program	does not contact the X server except when the generate command       is used.	 Normally xauth	is not used to create the authority file entry       in  the first place; the	program	that starts the	X server (often	xdm or     startx) does that.
|-
|xbuild||[https://www.freebsd.org/cgi/man.cgi?query=xbuild&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xbuild]  can be used to build MSBuild project files. Integrated Development Environments like MonoDevelop and "Microsoft Visual	 Studio	 .NET"       use msbuild project file	format.
|-
|xcam||[https://www.freebsd.org/cgi/man.cgi?query=xcam&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xcam] - a	graphical camera frontend for SANE
xcam  provides  a graphical user-interface to control an	image acquisition device such	as a flatbed scanner or	a camera.  It allows  scanning      invidual	images and can be invoked directly from	the command-line.
xcam  acts  as  a  stand-alone  program that saves acquired images in a       suitable	PNM format (PBM	for black-and-white images, PGM	for  grayscale       images, and PPM for color images).
|-
|xconfig||
|-
|xdg-desktop-icon||[https://www.freebsd.org/cgi/man.cgi?query=xdg-desktop-icon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-desktop-icon] - command line tool for	(un)installing icons to	the       desktop

The xdg-desktop-icon program can	be used	to install an application       launcher	or other file on the desktop of	the current user.
An application launcher is represented by a *.desktop file. Desktop       files are defined by the	freedesktop.org	Desktop	Entry Specification.       The most	important aspects of *.desktop files are summarized below.
|-
|xdg-desktop-menu||[https://www.freebsd.org/cgi/man.cgi?query=xdg-desktop-menu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-desktop-menu] - command line tool for	(un)installing desktop menu       items [https://www.freedesktop.org/wiki/Specifications/menu-spec/ hpmepage]

|-
|xdg-email||[https://www.freebsd.org/cgi/man.cgi?query=xdg-email&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-email] - command line	tool for sending mail using the	user's       preferred e-mail	composer

|-
|xdg-icon-resource||[https://www.freebsd.org/cgi/man.cgi?query=xdg-icon-resource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-icon-resource] - command line	tool for (un)installing	icon resources
|-
|xdg-mime||[https://www.freebsd.org/cgi/man.cgi?query=xdg-mime&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-mime]	- command line tool for	querying information about file	type       handling	and adding descriptions	for new	file types

|-
|xdg-open||[https://www.freebsd.org/cgi/man.cgi?query=xdg-open&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-open] - opens	a file or URL in the user's preferred application
|-
|xdg-screensaver||[https://www.freebsd.org/cgi/man.cgi?query=xdg-screensaver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-screensaver] - command line tool for controlling the screensaver
|-
|xdg-settings||[https://www.freebsd.org/cgi/man.cgi?query=xdg-settings&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-settings] - get various settings from	the desktop environment

|-
|xdg-user-dir||[https://www.freebsd.org/cgi/man.cgi?query=xdg-user-dir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-user-dir] looks up the current path for one of the special XDG user       dirs.
|-
|xdg-user-dirs-update||[https://www.freebsd.org/cgi/man.cgi?query=xdg-user-dirs-update&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-user-dirs-update] updates the	current	state of the users       user-dirs.dir. 
|-
|xdpyinfo||[https://www.freebsd.org/cgi/man.cgi?query=xdpyinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Xdpyinfo] is a utility for displaying information	about an X server.  It       is  used	to examine the capabilities of a server, the predefined	values       for various parameters used in communicating between  clients  and  the       server,	and the	different types	of screens and visuals that are	available.
|-
|xeglgears||
|-
|xeglthreads||
|-
|xfce4-about||
|-
|xfce4-panel||
|-
|xfce4-popup-applicationsmenu||
|-
|xfce4-popup-directorymenu||
|-
|xfce4-popup-windowmenu||
|-
|xfconf-query||
|-
|xfont||
|-
|xft-config||
|-
|xgettext||[https://www.freebsd.org/cgi/man.cgi?query=xgettext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xgettext] - extract gettext strings from source

|-
|xicclu||
|-
|xinit||[https://www.freebsd.org/cgi/man.cgi?query=xinit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xinit] - X Window	System initializer
The xinit program is used to start the X	Window	System	server	and  a       first  client  program  on systems that are not using a display manager       such as xdm(1) or in environments that  use  multiple  window  systems.       When  this  first  client  exits, xinit will kill the X server and then       terminate.
|-
|xkbcomp||The [https://www.freebsd.org/cgi/man.cgi?query=xkbcomp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xkbcomp]  keymap  compiler  converts	a description of an XKB	keymap       into one	of several output formats.   The most common use  for  xkbcomp       is  to create a compiled	keymap file (.xkm extension) which can be read       directly	by XKB-capable X servers or utilities.	 The  keymap  compiler       can  also  produce  C  header  files or XKB source files.  The C	header       files produced by xkbcomp can be	included by  X	servers	 or  utilities       that  need a built-in default keymap.  The XKB source files produced by       xkbcomp are fully resolved and can be used to  verify  that  the	 files       which typically make up an XKB keymap are merged	correctly or to	create       a single	file which contains a complete description of the keymap.
|-
|xkeystone||
|-
|xml2-config||[https://www.freebsd.org/cgi/man.cgi?query=xml2-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xml-config]  -  script to	get information	about the installed version of       GNOME-XML
|-
|xml2po||[https://www.freebsd.org/cgi/man.cgi?query=xml2po&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xml2po] -	program	to create a PO-template	file from a DocBook XML	file       and merge it back into a	(translated) XML file

|-
|xmlcatalog||[https://www.freebsd.org/cgi/man.cgi?query=xmlcatalog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlcatalog] - Command line tool to parse and manipulate XML or SGML       catalog files.
|-
|xmlcatmgr||[https://www.freebsd.org/cgi/man.cgi?query=xmlcatmgr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlcatmgr] is a utility used to manipulate SGML and	XML catalogs.  It is     designed with simplicity in mind: it does not depend on external programs     nor libraries.  This manpage corresponds to xmlcatmgr version 2.2.
|-
|xmllint||The [https://www.freebsd.org/cgi/man.cgi?query=xmllint&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmllint] program parses one or more XML files, specified on the
command line as XML-FILE	(or the	standard input if the filename       provided	is - ).	It prints various types	of output, depending upon the       options selected. It is useful for detecting errors both	in XML code       and in the XML parser itself.
|-
|xmlsec1||[https://www.freebsd.org/cgi/man.cgi?query=xmlsec1&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlsec]  is  a  command line tool	for signing, verifying,	encrypting and       decrypting XML documents.
|-
|xmlsec1-config||[https://www.freebsd.org/cgi/man.cgi?query=xmlsec1-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlsec1-config] -	detail installed version of xmlsec library

|-
|xmlwf||[https://www.freebsd.org/cgi/man.cgi?query=xmlwf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlwf] - Determines if an	XML document is	well-formed

|-
|xmodmap||The [https://www.freebsd.org/cgi/man.cgi?query=xmodmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmodmap] program is used to edit and display the  keyboard  modifier       map  and	 keymap	 table that are	used by	client applications to convert       event keycodes into keysyms.  It	is usually run from the	user's session       startup script to configure the keyboard	according to personal tastes.
|-
|Xorg||[https://www.freebsd.org/cgi/man.cgi?query=Xorg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Xorg]  is	a full featured	X server that was originally designed for UNIX       and UNIX-like operating systems running on Intel	x86 hardware.  It  now       runs on a wider range of	hardware and OS	platforms.
|-
|Xorg.wrap||
|-
|xprop||The [https://www.freebsd.org/cgi/man.cgi?query=xprop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xprop] utility is for	displaying window and font properties in an  X       server.	 One  window  or font is selected using	the command line arguments or	possibly in the	case of	a window, by clicking on  the  desired       window.	 A  list of properties is then given, possibly with formatting       information.
|-
|xpstojpeg||
|-
|xpstopdf||
|-
|xpstopng||
|-
|xpstops||
|-
|xpstosvg||
|-
|xrandr||[https://www.freebsd.org/cgi/man.cgi?query=xrandr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xrandr] -	primitive command line interface to RandR extension
Xrandr is used to set the size, orientation and/or  reflection  of  the       outputs for a screen. It	can also set the screen	size.
If  invoked  without any	option,	it will	dump the state of the outputs,       showing the existing modes for each of them, with a '+' after the  preferred modes and	a '*' after the	current	mode.
There  are  a  few global options. Other	options	modify the last	output       that is specified in earlier parameters in the command  line.  Multiple       outputs	may  be	modified at the	same time by passing multiple --output       options followed	immediately by their corresponding modifying options.
|-
|xrdb||[https://www.freebsd.org/cgi/man.cgi?query=xrdb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Xrdb]  is	 used to get or	set the	contents of the	RESOURCE_MANAGER property on the root	window of screen 0, or the  SCREEN_RESOURCES  property       on  the root window of any or all screens, or everything	combined.  You       would normally run this program from your X startup file.
|-
|xrotfontdemo||
|-
|xsane||[https://www.freebsd.org/cgi/man.cgi?query=xsane&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsane] provides a	graphical user-interface to control an image  acquisition  device such as a flatbed scanner.	It allows previewing and scanning individual images and can be invoked either	directly from the command-line  or through The GIMP image manipulation program.  In the former case, xsane acts as a stand-alone program that saves	 acquired  images  in	a suitable PNM format (PBM for black-and-white images, PGM for       grayscale images, and PPM for color images) or converts	the  image  to       JPEG,  PNG,  PS	or  TIFF.  In the latter case, the images are directly       passed to The GIMP for further processing.
|-
|xscanimage||[https://www.freebsd.org/cgi/man.cgi?query=xscanimage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xscanimage] provides a graphical userinterface to control an image  acquisition device	such as	a flatbed scanner or a camera.	It allows previewing and scanning invidual images and	can be invoked either directly       from  the  command-line or through The GIMP image manipulation program.       In the former case, xscanimage acts as a	stand-alone program that saves       acquired	 images	 in a suitable PNM format (PBM for black-and-white images, PGM for grayscale images, and PPM for color images).  In the latter  case,  the images are directly passed to The GIMP for further processing.
|-
|xsd||[https://www.freebsd.org/cgi/man.cgi?query=xsd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsd]  is a tool for intended to complement the XML serialization support     of Mono.	It can do the following	tasks:
|-
|xset||[https://www.freebsd.org/cgi/man.cgi?query=xset&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xset] - user preference utility for X
This program is used to set various user	preference options of the display.
|-
|xslt-config||
|-
|xsltproc||[https://www.freebsd.org/cgi/man.cgi?query=xsltproc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsltproc] is a command line tool for applying XSLT stylesheets to	XML       documents. It is	part of	libxslt(3), the	XSLT C library for GNOME.       While it	was developed as part of the GNOME project, it can operate       independently of	the GNOME desktop.
|-
|xsubpp||[https://www.freebsd.org/cgi/man.cgi?query=xsubpp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsubpp] -	compiler to convert Perl XS code into C	code
This compiler is	typically run by the makefiles created by       ExtUtils::MakeMaker or by Module::Build or other	Perl module build       tools.
xsubpp will compile XS code into	C code by embedding the	constructs       necessary to let	C functions manipulate Perl values and creates the       glue necessary to let Perl access those functions.  The compiler	uses       typemaps	to determine how to map	C function parameters and variables to       Perl values.
|-
|xxd||[https://www.freebsd.org/cgi/man.cgi?query=xxd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xxd] - make a hexdump or do the reverse.

|-
|xxhsum||
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content Y===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|yat2m||
|-
|yelp||[https://www.freshports.org/x11/yelp yelp] Help browser for the GNOME 3 desktop
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}

===Content Z===

{|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px" 
|-
! scope="col" style="width: 100px;"|'''Utility'''
! scope="col" style="width: 350px;"|'''Description'''
|-
!colspan="2"|
|-
|zeitgeist-daemon||[https://www.freebsd.org/cgi/man.cgi?query=zeitgeist-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zeitgeist-daemon] is daemon providing an	activity log. That is, it consists of	a central database for events such as file usage, browser history, calendar entries, etc.
|-
|zeitgeist-datahub||[https://www.freebsd.org/cgi/man.cgi?query=zeitgeist-datahub&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zeitgeist-datahub] - passive loggers for Zeitgeist

|-
|zenity||[https://www.freebsd.org/cgi/man.cgi?query=zenity&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zenity]  is a program that will display GTK+ dialogs, and	return (either  in the return code, or on standard output) the users input. This	allows    you to present information, and ask for information from	the user, from   all manner of shell scripts.
|-
|zim||[https://www.freebsd.org/cgi/man.cgi?query=zim&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zim] - A Desktop Wiki Editor
|-
|zip||[https://www.freebsd.org/cgi/man.cgi?query=zip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zip] - package and compress (archive) files

|-
|zipcloak||[https://www.freebsd.org/cgi/man.cgi?query=zipcloak&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipcloak] - encrypt entries in a zipfile
|-
|zipcmp||[https://www.freebsd.org/cgi/man.cgi?query=zipcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipcmp] compares the zip archives or directories archive1 and archive2 and  checks if they contain the	same files, comparing their names, uncompressed sizes, and	CRCs.  File order and compressed size differences are     ignored.
|-
|zipdetails||[https://www.freebsd.org/cgi/man.cgi?query=zipdetails&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Zipdetails] displays information about the internal record structure of        the zip file. It	is not concerned with displaying any details of	the       compressed data stored in the zip file.
|-
|zipgrep||[https://www.freebsd.org/cgi/man.cgi?query=zipgrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipgrep] - search	files in a ZIP archive for lines matching a pattern

|-
|zipinfo||[https://www.freebsd.org/cgi/man.cgi?query=zipinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipinfo] - list detailed information about a ZIP archive

|-
|zipmerge||[https://www.freebsd.org/cgi/man.cgi?query=zipmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipmerge] merges the source	zip archives source-zip	into the target	zip
archive target-zip.  By default, files in the source zip archives over  write existing files of the same name in the target zip archive.

|-
|zipnote||[https://www.freebsd.org/cgi/man.cgi?query=zipnote&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipnote]	-  write  the comments in zipfile to stdout, edit comments and
rename files in zipfile
|-
|zipsplit||[https://www.freebsd.org/cgi/man.cgi?query=zipsplit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipsplit] - split	a zipfile into smaller zipfiles

|-
|ziptool||[https://www.freebsd.org/cgi/man.cgi?query=ziptool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ziptool] modifies the zip archive zip-archive according to the commands
given.
|-
|zlib_decompress||[https://dev.mysql.com/doc/refman/8.0/en/zlib-decompress.html zlib_decompress] — Decompress mysqlpump ZLIB-Compressed Output
|-
|zlib-flate||The [https://www.freebsd.org/cgi/man.cgi?query=zlib-flate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zlib-flate] program is part of the qpdf package.
|-
|zmf2raw||[https://www.mankier.com/1/zmf2raw zmf2raw] is used to test libzmf.
|-
|zmf2svg||[https://www.mankier.com/1/zmf2svg zmf2svg] converts Zoner Draw documents to SVG.
|-
|zsh||[https://www.freebsd.org/cgi/man.cgi?query=zsh&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zsh] - the Z shell
|-
|zsh-5.8||[https://www.reddit.com/r/zsh/comments/f4nppx/zsh_58_released/ zsh-5.8]
|-
!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
|}


[[Category:Sysutils]]
@@ Line 1,403: / Line 1,403: @@
 input to	the secured socket and vice versa.
 |-
-|gnutls-cli-debug||[https://www.freebsd.org/cgi/man.cgi?query=gnutls-cli-debug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gnutls-cli-debug] - GnuTLS debug client
+|gnutls-cli-debug||
 |-
-|gnutls-serv||[https://www.freebsd.org/cgi/man.cgi?query=gnutls-serv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gnutls-serv] - GnuTLS server
+|gnutls-serv||
 |-
-|gobject-query||[https://www.freebsd.org/cgi/man.cgi?query=gobject-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gobject-query] is	a small	utility	that draws a tree of types.
+|gobject-query||
-gobject-query takes a mandatory argument	that specifies whether it       should iterate over the fundamental types or print a type tree.
 |-
-|gpatch||[https://www.freebsd.org/cgi/man.cgi?query=gpatch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html patch] takes a patch file	patchfile containing a difference listing produced by	the diff program and applies those differences to one or  more       original	 files,	producing patched versions.  Normally the patched versions are put in	place of the originals.	 Backups can be	made; see  the    -b
+|bin/gpatch||
-or  --backup	option.	 The names of the files	to be patched are usually taken from the patch file, but if there's  just  one  file	to  be       patched it can be specified on the command line as originalfile.
 |-
-|gperl||[https://www.freebsd.org/cgi/man.cgi?query=gperl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gperl] - groff preprocessor for Perl parts in roff files
+|gperl||
 |-
 |gpg2||[https://www.freebsd.org/cgi/man.cgi?query=gpg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg2] - OpenPGP encryption and signing tool