Difference between revisions of "/usr/local/bin/"

Latest revision as of 15:26, 14 July 2020

Welcome to /usr/local/bin/.

System Administration Utilities

/bin/ Tools and applications	/sbin/ System Administration Utilities
/usr/bin/ Tools and applications	/usr/sbin/ System tools
/usr/local/bin/ Tools and applications	/usr/local/sbin/ System tools

Back to the System

Introduction[edit]

Here you will find a lot of small applications. Most of them already installed with GhostBSD.

This directory contains more or less 2500 utilities, applications, tools. If you install an application and don't find it as a starter on your taskbar, it is most likely you will find the application in this directory. You can start this application via cli or set a link to your desktop.

Not all applications come with man pages.

Content[edit]

Extraction of /usr/local/bin/:

Content 0 - A[edit]

Utility	Description

7z	A file archiver with highest compression ratio
a52dec	a52dec - decode ATSC A/52 audio streams
aafire	aafire, aainfo, aasavefont, aatest - aalib example programs
aainfo	aafire, aainfo, aasavefont, aatest - aalib example programs
aalib-config	aalib ASCII art library; AA-lib is a low-level graphics library similar to many other libraries except for the fact that AA-lib does not require a graphics device! In fact, no "graphical" output is possible. AA-lib uses a modern, high-techascii-art renderer in place of outmoded and cumbersome graphical output. WWW: http://aa-project.sourceforge.net/aalib/
aasavefont	aafire, aainfo, aasavefont, aatest - aalib example programs
acyclic	acyclic is a filter that takes a directed graph as input and outputs a copy of the graph with sufficient edges reversed to make the graph acyclic.
addftinfo	addftinfo reads a troff font file and adds some additional font-metric information that is used by the groff system.
addr2line	addr2line -- translate program addresses to source file names and line numbers
afmtodit	afmtodit - create font files for use with groff -Tps
afuse	AFUSE - automounting file system implemented in user-space using FUSE
ag-backup	ag - The Silver Searcher. Like ack, but faster.
ag-tool	ag - The Silver Searcher. Like ack, but faster.
agentxtrap	agentxtrap - send an AgentX NotifyPDU to an AgentX master agent
agrep	agrep - search a file for a string or regular expression, with approximate matching capabilities
al	al, al2 - Mono Assembly Linker
al2	al, al2 - Mono Assembly Linker
analyze	The analyze command displays the rotation and fallback angles, surface area, and plane equation for each face of the ARB specified on the command line.
appletviewer	appletviewer - Runs applets outside of a web browser.
ar	ar, ranlib -- manage archives
array	Arrays can have fixed size, or can grow automatically as needed. A default value is used for entries that have not been explicitly set.
as	AS - the portable GNU assembler.
aspell	aspell is a utility program that connects to the Aspell library so that it can function as an ispell -a replacement, as an independent spell checker, as a test utility to test out Aspell library features, and as a utility for managing dictionaries used by the library.
aspell-import	aspell-import is a command that will search for old personal dictionaries and will import them into GNU Aspell. It will look for both Ispell and Aspell dictionaries. To use it just run it from the command prompt.
atril	Atril - The MATE Document Viewer
aucat	aucat -- audio files manipulation tool
audio2tape	audio2tape -- Sinclair ZX Spectrum audio to tape file co
autopoint	autopoint - copies standard gettext infrastructure

Content B[edit]

Utility	Description

baobab	Baobab is a disk space analyzer for GNOME
bash	Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh).
bashbug	bashbug - report a bug in bash
bcomps	bcomps decomposes graphs into their biconnected components, printing the components to standard output.
bounce	The bounce(8) daemon maintains per-message log files with delivery status information.
brasero	Brasero is a disc burning application. It is designed to be simple and easy to use. It allows to create data CD/DVD, audio CD, to copy CD/DVD and to burn images. It has some nices features, such as a song, image and video previewer. It can also search for files (thanks to beagle) and display a playlist and its contents.
bsdcat	bsdcat typically takes a filename as an argument or reads standard input when used in a pipe. In both cases decompressed data it written to standard output.
bsdcpio	cpio copies files between archives and directories. This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom images and can create tar, pax, cpio, ar, and shar archives.
bsdtar	tar creates and manipulates streaming archive files. This implementation can extract from tar, pax, cpio, zip, jar, ar, xar, rpm, 7-zip, and ISO9660 cdrom images and can create tar, pax, cpio, ar, zip, 7-zip, and shar archives.
btcflash	Btcflash is used to read update the Firmware for a BTC DRW1008 DVD+/-RW recorder.
bzz	bzz - DjVu general purpose compression utility.
Back to Top

Content C[edit]

Utility	Description

c44	C44 produces a DjVuPhoto encoded image. The input image file inputfilename can be either a portable gray-map (PGM) or a portable pix-map PPM). Input images compressed with JPEG are also accepted. It is however suggested to only use high quality JPEG files (low compression ratio, large size) because the wavelet compression will increase the defects already present in highly compressed JPEG files.
c++9	C++ is a general-purpose programming language created by Bjarne Stroustrup as an extension of the C programming language, or "C with Classes".
cairo-sphinx	Cairo is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System and in-memory image buffers. PostScript and PDF file output is planned. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).
cairo-trace	Cairo is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System and in-memory image buffers. PostScript and PDF file output is planned. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).
caja	Caja - The MATE File Manager
caja-autorun-software	caja-autorun-software - Autorun Software in Caja
caja-connect-server	Caja Connect Server is the connection manager for Caja/MATE. It is provided as a part of the Caja package for the MATE Desktop Environment. Simply running "caja-connection-server" will open a simple dialog allowing you to select the server type, and specify the server address, port, and login credentials for the server you want to connect to. This is the same dialog accessible via the Caja "File" menu, and the MATE Desktop "Places" menu.
caja-file-management-properties	Caja File Management Properties is distributed as a part of the caja package and is used to configure Caja's preferences. It is typically accessible through the "Edit" menu in Caja browser windows, or by pressing "ALT+E" and then "N" once the menu opens. File Management Preferences allows the user to configure the way caja behaves.
caja-sendto	caja-sendto - convenience application to send a file via email or instant messenger
canberra-gtk-play	canberra-gtk-play plays sound events that are specified by the XDG Sound Theme and Name Specification.
cancel
caspol	Command line tool to modify Code Access Security policies.
cb2ti3	cb2ti3 Convert Colorblind format CMY/RGB test chart information into Argyll .ti3 CGATS profile forma files. This allows the use of raw Colorblind profiling data, to be used for Argyll profile creation or validation..
cbc	cbc - Couchbase Client Commandline Utility
cccheck	cccheck- Perform static code contracts verification for CLR assemblies.
ccomps	ccomps - connected components filter for graphs
ccrewrite	ccrewrite - Rewrite CLR assemblies for runtime code contract verification.
cctiff	cctiff Color convert a TIFF or JPEG file using a sequence of compatible ICC device profiles, abstract profiles, device link profiles and calibration files. The sequence may be zero length, facilitating format conversion and ICC profile embedding without otherwise altering the pixel values.
ccxxmake	ccxxmake For Colorimeters that rely on a calibration matrix, ccxxmake allows creation of a correction matrix file (ccmx) for a particular Colorimeter & Display combination, by making use a reference Spectrometer or Colorimeter instrument. This can then be used to improve the accuracy of subsequent measurements with that Colorimeter on that Display by using it with the dispcal, dispread and spotread -X option. A ccmx file can also be installed, and will then appear in the available display type selection (-y option). See Wide Gamut Displays and Colorimeters for more information on why this may be useful. [ Note that to make use of a colorimeter as a CCMX reference, you will have to provide two .ti3 files rather than using interactive measurement- see -f. ]
cd-convert	cd-it8 - Color Manager Testing Tool
cd-create-profile	cd-create-profile - Color Manager Profile Creation Tool
cd-drive	cd-drive - show CD-ROM drive characteristics
cd-fix-profile	cd-fix-profile - Color Manager Testing Tool
cd-iccdump
cd-info	cd-info - shows Information about a CD or CD-image
cd-it8	cd-it8 - Color Manager Testing Tool
cd-paranoia	cd-paranoia 9.8 (Paranoia release III via libcdio) - an audio CD reading utility which includes extra data verification features
cd-read	cd-read - reads Information from a CD or CD-image
cdda2wav	cdda2wav - dumps CD audio data into sound files with extra data verification
cdda-player	cdda-player: - simple curses CD player
cddb_query	cddb_query This function will recalculate the disc ID of the disc provided to it and then query the local cache or the remote server for the requested information. The first disc in the query can now be processed (3). We decrement the match counter and if it has not yet reached zero, we retrieve the next match with cddb_query_next (4).
cdparanoia	cdparanoia (Paranoia release III) - an audio CD reading utility which includes extra data verification features
cdr2raw
cdr2text
cdr2xhtml
cdrdao	cdrdao - reads and writes CDs in disc-at-once mode
cdrecord	Cdrecord is used to record data or audio Compact Discs on an Orange Book CD-recorder, to write DVD media on a DVD-recorder or to write BluRay media on a BluRay-recorder.
cert2spc	cert2spc - Transform multiple X.509 certificates to a Software Publisher Certificate
cert-sync	cert-sync - Mono Certificate Store Sync Tool
certmgr	certmgr - Mono Certificate Manager (CLI version)
certtool	certtool - GnuTLS certificate tool
certutil
chardetect-3.7
chartread
chattr	chattr - change file attributes on a Linux file system
checkmk	checkmk - Awk script for generating C unit tests for use with the Check unit testing framework.
checkXML5	checkXML5 - An XML lint tool for KDE DocBook XML documents.
cheese	cheese - tool to take pictures and videos from your webcam
cheetah
cheetah-analyze
cheetah-compile
chem	chem - groff preprocessor for producing chemical structure diagrams
cherryd-2.7
cherrytree
chktrust	chktrust - Check the trust of a PE executable.
chm_http
chmorph
chrome	chromium-browser - the web browser from Google
chromedriver
cifsdd	cifsdd - convert and copy a file over SMB, This tool is part of the samba(7) suite.
cinnamon-desktop-migrate-mediakeys
cjb2	cjb2 - Simple DjVuBitonal encoder.
cjpeg	cjpeg - compress an image file to a JPEG file
cjs-console
ck-history
ck-launch-session
ck-list-sessions
clang80	clang is a C, C++, and Objective-C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking. Depending on which high-level mode setting is passed, Clang will stop before doing a full link. While Clang is highly integrated, it is important to understand the stages of compilation, to understand how to invoke it.
classpath
clear-color
clear-fbo
clear-fbo-scissor
clear-fbo-tex
clear-random
clear-repeat
clear-scissor
clear-undefined
clearspd
clp
cluster	cluster - find clusters in a graph and augment the graph with this information.
cmis-client
cmsutil
cmx2raw
cmx2text
cmx2xhtml
collink
colormgr
colprof
colverify
com.github.danrabbit.lookbook
contractor
convolutions
copypix
copytex
corelist	corelist - a commandline frontend to Module::CoreList
corpus2array
corrupt_mpeg2
cpaldjvu	cpaldjvu - DjVuDocument encoder for low-color images.
cpan	This script provides a command interface (not a shell) to CPAN. At the moment it uses CPAN.pm to do the work, but it is not a one-shot command runner for CPAN.pm.
cpp9
createfpx
createhdf
createwin
crlupdate	crlupdate - Mono Certficate Revocation List Downloader and Updater This tool allows the download of new, or update of existing, Certficate Revocation List (CRL) associated with the certificates present in the user (default) or machine stores. The CRL present in the stores are used to determine the validity of unexpired, trusted X.509 certificates. To ensure CRL are always fresh consider automating the updates using the at (or similar) command(s).
crlutil
croco-0.6-config
csc	csc - driver program for the CHICKEN Scheme compiler
cscope	cscope - interactively examine a C program
csepdjvu	csepdjvu - DjVu encoder for separated data files.
csharp	csharp, gsharp - Interactive C# Shell
csi	The CHICKEN Scheme interpreter
csslint-0.6
cubemap
cuberender
cue2toc	Cue2toc converts cuefile from CUE to TOC format and writes the result to tocfile. If either cuefile or tocfile is omitted or a single dash "-" cue2toc reads from standard input and writes to standard ouput respectively.
cups-calibrate	cups-calibrate - ESP CUPS Printer Calibration Tool This program allows you to calibrate the color output of printers using the Gutenprint CUPS driver. Please note that this program only works with the Gutenprint CUPS driver.
cups-config	cups-config - get cups api, compiler, directory, and link information.
cupstestdsc	cupstestdsc tests the conformance of PostScript files to the Adobe PostScript Language Document Structuring Conventions Specification version 3.0. The results of testing and any other output are sent to the standard output. The second form of the command reads PostScript from the standard input.
cupstestppd	cupstestppd tests the conformance of PPD files to the Adobe PostScript Printer Description file format specification version 4.3. It can also be used to list the supported options and available fonts in a PPD file. The results of testing and any other output are sent to the standard output.
curl	curl is a tool to transfer data from or to a server, using one of the supported protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMB, SMBS, SMTP, SMTPS, TELNET and TFTP). The command is designed to work without user interaction.
curl-config	curl-config - Get information about a libcurl installation
cvlc
cvsps	CVSps - create patchset information from CVS
cvt	cvt - calculate VESA CVT mode lines
cvtsudoers
cwebp	cwebp - compress an image file to a WebP file
cxpm	cxpm - Check an XPM (X PixMap) file, versions XPM 1, 2, or 3.
Back to Top

Content D[edit]

Utility	Description

dav1d
dazzle-list-counters
dbus-binding-tool	dbus-binding-tool - C language GLib bindings generation utility.
dbus-cleanup-sockets	dbus-cleanup-sockets - clean up leftover sockets in a directory
dbus-daemon	dbus-daemon - Message bus daemon
dbus-launch	dbus-launch - Utility to start a message bus from a shell script
dbus-monitor	dbus-monitor - debug probe to print message bus messages
dbus-run-session	dbus-run-session - start a process as a new D-Bus session
dbus-send	dbus-send - Send a message to a message bus
dbus-test-tool	dbus-test-tool - D-Bus traffic generator and test tool
dbus-update-activation-environment	dbus-update-activation-environment - update environment used for D-Bus session services
dbus-uuidgen	dbus-uuidgen - Utility to generate UUIDs
dbwrap_tool	dbwrap_tool - low level TDB/CTDB manipulation tool using the dbwrap interface. This tool is part of the samba(7) suite.
dcadec	dcadec - decode DTS Coherent Acoustics audio streams
dconf	dconf - Simple tool for manipulating a dconf database
dconf-editor	The dconf-editor program provides a graphical interface for editing settings that are stored in the dconf database.
ddjvu	ddjvu - Command line DjVu decoder.
derb	derb reads the compiled resource bundle files passed on the command line and write them back in text form. The resulting text files have a .txt extension while compiled resource bundle source files typically have a .res extension.
derdump	Derdump dumps a DER structure read from a file or, if none is specified, from standard input to standard output. It is mainly intended as a debugging tool.
deriv
desktop-file-install	The desktop-file-install program is a tool to install, and optionally edit, desktop files. The desktop-file-edit program is a tool to edit a desktop file. They are mostly useful for developers and packagers.
desktop-file-validate	desktop-file-validate - Validate desktop entry files
desktoptojson	desktoptojson - Converts a .desktop file to a .json file.
devdump	devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
dht-example
diagtool80
diffimg	diffimg - Calculates intersection between two images
dijkstra	dijkstra - single-source distance filter
ding	ding is a dictionary lookup program for X Windows/Unix. It comes with a German-English dictionary with about 345,000 entries.
dinoshade
dirmngr	Dirmngr is a server for managing and downloading certificate revocation lists (CRLs) for X.509 certificates and for downloading the certificates themselves. Dirmngr also handles OCSP requests as an alternative to CRLs. Dirmngr is either invoked internally by gpgsm (from GnuPG 2) or when running as a system daemon through the dirmngr-client tool.
dirmngr-client	dirmngr-client - Tool to access the Dirmngr services
disco	disco is a tool for discovering web services and for retireving the documents that describe those services.
dispcal
dispread
dispwin
dissolve
djpeg	djpeg decompresses the named JPEG file, or the standard input if no file is named, and produces an image file on the standard output. PBM-PLUS (PPM/PGM), BMP, GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected.
djvm	djvm - Manipulate bundled multi-page DjVu documents.
djvmcvt	djvmcvt - Convert multi-page DjVu documents.
djvudigital	djvudigital - creates DjVu files from PS or PDF files.
djvudump	djvudump - Display internal structure of DjVu files.
djvuextract	djvuextract - Extract chunks from DjVu image files
djvumake	djvumake - Assemble DjVu image files.
djvups	djvups - Convert DjVu documents to PostScript.
djvused	djvused - Multi-purpose DjVu document editor.
djvuserve	Program djvuserve is a CGI program that can be executed by a HTTP server for serving DjVu documents. This program is able to conver
djvutoxml	djvutoxml, djvuxmlparser - DjVuLibre XML Tools; The DjVuLibre XML Tools provide for editing the metadata, hyperlinks and hidden text associated with DjVu files. Unlike djvused(1) the DjVuLibre XML Tools rely on the XML technology and can take advantage of XML editors and verifiers.
djvutxt	djvutxt - Extract the hidden text from DjVu documents.
djvuxmlparser	djvutoxml, djvuxmlparser - DjVuLibre XML Tools; The DjVuLibre XML Tools provide for editing the metadata, hyperlinks and hidden text associated with DjVu files. Unlike djvused(1) the DjVuLibre XML Tools rely on the XML technology and can take advantage of XML editors and verifiers.
dlist-begin-call-end
dlist-dangling
dlist-degenerate
dlist-edgeflag
dlist-edgeflag-dangling
dlist-flat-tri
dlist-mat-tri
dlist-recursive-call
dlist-tri-flat-tri
dlist-tri-mat-tri
dm-tool	dm-tool - a tool to control the display manager
dmcs
doas	doas -- execute commands as another user
dot	dot - filter for drawing directed graphs
dot_builtins
dotty	dotty is a graph editor for the X Window System. It may be run as a standalone editor, or as a front end for applications that use graphs. It can control multiple windows viewing different graphs.
dpkg	dpkg is a tool to install, build, remove and manage Debian packages.
dpkg-architecture	dpkg-architecture provides a facility to determine and set the build and host architecture for package building. The build architecture is always determined by an external call to dpkg(1), and cannot be set at the command line.
dpkg-buildflags	dpkg-buildflags is a tool to retrieve compilation flags to use during build of Debian packages.
dpkg-buildpackage	dpkg-buildpackage - build binary or source packages from sources
dpkg-checkbuilddeps	This program checks the installed packages in the system against the build dependencies and build conflicts listed in the control file. If any are not met, it displays them and exits with a nonzero return code.
dpkg-deb	dpkg-deb packs, unpacks and provides information about Debian archives.
dpkg-distaddfile	dpkg-distaddfile adds an entry for a named file to debian/files.
dpkg-divert	dpkg-divert is the utility used to set up and update the list of diversions.
dpkg-genbuildinfo	dpkg-genbuildinfo reads information from an unpacked and built Debian source tree and from the files it has generated and generates a Debian control file describing the build environment and the build artifacts (.buildinfo file).
dpkg-genchanges	dpkg-genchanges reads information from an unpacked and built Debian source tree and from the files it has generated and generates a Debian upload control file (.changes file).
dpkg-gencontrol	dpkg-gencontrol reads information from an unpacked Debian source tree and generates a binary package control file (which defaults to debian/tmp/DEBIAN/control); during this process it will simplify the relation fields.
dpkg-gensymbols	dpkg-gensymbols scans a temporary build tree (debian/tmp by default) looking for libraries and generates a symbols file describing them. This file, if non-empty, is then installed in the DEBIAN subdirectory of the build tree so that it ends up included in the control information of the package.
dpkg-maintscript-helper	dpkg-maintscript-helper - works around known dpkg limitations in maintainer scripts
dpkg-mergechangelogs	dpkg-mergechangelogs - 3-way merge of debian/changelog files
dpkg-name	This manual page documents the dpkg-name program which provides an easy way to rename Debian packages into their full package names. A full package name consists of package_version_architecture.package-type as specified in the control file of the package. The version part of the filename consists of the upstream version information optionally followed by a hyphen and the revision information. The package-type part comes from that field if present or fallbacks to deb.
dpkg-parsechangelog	dpkg-parsechangelog reads and parses the changelog of an unpacked Debian source tree and outputs the information in it to standard output in a machine-readable form.
dpkg-query	dpkg-query - a tool to query the dpkg database
dpkg-scanpackages	dpkg-scanpackages sorts through a tree of Debian binary packages and creates a Packages file, used by apt(8), dselect(1), etc, to tell the user what packages are available for installation. These Packages files are the same as those found on Debian archive sites and CD-ROMs. You might use dpkg-scanpackages yourself if making a directory of local packages to install on a cluster of machines.
dpkg-scansources	dpkg-scansources scans the given binary-dir for .dsc files. These are used to create a Debian source index, which is output to stdout.
dpkg-shlibdeps	dpkg-shlibdeps - generate shared library substvar dependencies
dpkg-source	dpkg-source - Debian source package (.dsc) manipulation tool
dpkg-split	dpkg-split splits Debian binary package files into smaller parts and reassembles them again, to support the storage of large package files on small media such as floppy disks.
dpkg-statoverride	dpkg-statoverride - override ownership and mode of files
dpkg-trigger	dpkg-trigger is a tool to explicitly activate triggers and check for its support on the running dpkg.
dpkg-vendor	dpkg-vendor is a tool to query information about vendors listed in /usr/local/etc/dpkg/origins. /usr/local/etc/dpkg/origins/default contains information about the current vendor.
draw2arrays
drawarrays
drawelements
drawelements-large
drawoverhead
drawpix
drawrange
dropbox	dropbox - A command line interface to the Dropbox service
dsbmc
dsbmc-cli	dsbmc-cli is a command-line client for DSBMD that provides a simple interface to query information about storage devices, and to send requests to mount, unmount and eject these.
dselect	dselect is one of the primary user interfaces for managing packages on a Debian system. At the dselect main menu, the system administrator can: Update the list of available package versions, View the status of installed and available packages, Alter package selections and manage dependencies, Install new packages or upgrade to newer versions.
dsymutil80
dtd2rng
dtd2xsd	dtd2xsd - XML Schema generator from XML document that contains DTD.
dtsdec
dumpmscat
dumpsexp
dvd-ram-control
dvd+rw-booktype
dvd+rw-format
dvd+rw-mediainfo
dvipdf	dvipdf - Convert TeX DVI file to PDF using ghostscript and dvips
dwebp	dwebp - decompress a WebP file to an image file
dwp
Back to Top

Content E[edit]

Utility	Description

easy_install-2.7
easy_install-3.6
easy_install-3.7
ebook2html
ebook2raw
ebook2text
echo-client-2
edgepaint	edgepaint takes as input a graph in DOT format with node position information (the pos attribute) and colors the edges in a manner making it easier to tell them apart.
editorconfig-0.12.2
eglgears_x11
eglinfo
eglkms
egltri_x11
einfo
elfedit	elfedit - Update the ELF header of ELF files. elfedit updates the ELF header of ELF files which have the matching ELF machine and file types. The options control how and which fields in the ELF header should be updated.
eLut
enc2xs	enc2xs builds a Perl extension for use by Encode from either Unicode Character Mapping files (.ucm) or Tcl Encoding Files (.enc). Besides being used internally during the build process of the Encode module, you can use enc2xs to add your own encoding to perl. No knowledge of XS is necessary.
encguess	encguess - guess character encodings of files; The encoding identification is done by checking one encoding type at a time until all but the right type are eliminated. The set of encoding types to try is defined by the -s parameter and defaults to ascii, utf8 and UTF-16/32 with BOM. This can be overridden by passing one or more encoding types via the -s parameter. If you need to pass in multiple suspect encoding types, use a quoted string with the a space separating each value.
enchant	Enchant - a spellchecker; Enchant has a global and a per-user ordering file named enchant.ordering. It lets the user specify which spelling backend to use for individual languages in the case when you care which backend gets used. The global file is located in $(datadir)/enchant and the per-user file is located in ~/.enchant. The per-user file takes precedence, if found.
enchant-2
enchant-lsmod
enchant-lsmod-2
encode_keychange	encode_keychange produces a KeyChange string using the old and new passphrases as described in Section 5 of RFC 2274 "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)". -t option is mandatory and specifies the hash transform type to use.
engine	The engine command is used to query the status and capabilities of the specified engine's. Engines may be specified before and after all other command-line flags. Only those specified are queried.
engrampa	Engrampa is the official archive manager for the MATE Desktop Environment, it is a graphical front-end to archiving utilities such as tar and zip. It is a fork of File Roller.
enum_chmLib
enumdir_chmLib
envsubst	envsubst - substitutes environment variables in shell format strings
eom	eom or the Eye of MATE is the official image viewer for the MATE Desktop Environment. It aims to be simplistic, lightweight, and easy to use. The Eye of MATE may also be used to perform basic tasks like image flipping and rotation.
eps2eps	ps2ps, eps2eps - Ghostscript PostScript "distiller"
epsffit	Epsffit fits an EPSF file (encapsulated PostScript) to a given bounding box. The coordinates of the box are given by (llx,lly) for the lower left, and (urx,ury) for the upper right, in PostScript units (points).
eqn	This manual page describes the GNU version of eqn, which is part of the groff document formatting system. eqn compiles descriptions of equations embedded within troff input files into commands that are understood by troff. Normally, it should be invoked using the -e option of groff. The syntax is quite compatible with Unix eqn. The output of GNU eqn cannot be processed with Unix troff; it must be processed with GNU troff. If no files are given on the command line, the standard input will be read. A filename of - will cause the standard input to be read.
eqn2graph	Reads an EQN equation (one line) as input; produces an image file (by default in Portable Network Graphics format) suitable for the Web as output.
erb26
es2_info
es2gears_x11
es2tri
escputil	escputil is a command line utility to perform various maintenance tasks on Epson Stylus inkjet printers. These tasks include head alignment, head cleaning, nozzle check, printer identification, and retrieval of ink level from the printer.
espeak
event_rpcgen.py
evince	Evince is a document viewer capable of displaying multiple and single page document formats like PDF and Postscript. For more general information about Evince please visit our website at Evince
evince-previewer
evince-thumbnailer
exctags	exctags - Generate tag files for source code
exempi	exempi - command line tool to manipulate XMP metadata
exiv2	exiv2 is a program to read and write Exif, IPTC, XMP metadata and image comments and can read many vendor makernote tags. The program optionally converts between Exif tags, XMP properties and IPTC datasets as recommended by the Exif Standard, the IPTC Standard, the XMP specification and Metadata Working Group guidelines.
exo-csource	exo-csource is a small utility that generates C code containing arbitrary data, useful for compiling texts or other data directly into programs.
exo-desktop-item-edit
exo-open	exo-open is a command line frontend to the Xfce Preferred Applications framework. It can either be used to open a list of urls with the default URL handler or launch the preferred application for a certain category.
exo-preferred-applications
exr2aces
exrenvmap
exrheader
exrmakepreview
exrmaketiled
exrmultipart
exrmultiview
exrstdattr
ext4fuse
external-ip
extract_a52	extract_a52 - extract ATSC A/52 audio from a MPEG stream.
extract_chmLib
extract_dca	extract_dca - extract DTS Coherent Acoustics audio from a MPEG stream.
extract_dts
extract_mpeg2	extract_mpeg2 - extract MPEG video streams from a multiplexed stream.
extracticc
extractres	extractres - filter to extract resources from a PostScript document
extractttag
Back to Top

Content F[edit]

Utility	Description

faad	faad -- Process an Advanced Audio Codec stream; This utility provides a command line interface to libfaad2. This program reads in MPEG-4 AAC files, processes, and outputs them in either Microsoft WAV, MPEG-4 AAC ADTS, or standard PCM formats.
fakeCMY
fakeread
fax2ps	fax2ps - convert a TIFF facsimile to compressed PostScripttm
fax2tiff	fax2tiff - create a TIFF Class F fax file from raw fax data
fbo_firecube
fbobind
fbotexture
fbsdpkgupdate
fc_solve_find_index_s2ints.py
fc-cache	fc-cache - build font information cache files; fc-cache scans the font directories on the system and builds font information cache files for applications using fontconfig for their font handling.
fc-cat	fc-cat reads the font information from cache files or related to font directories and emits it in ASCII form.
fc-conflist
fc-list	fc-list lists fonts and styles available on the system for applications using fontconfig. If any elements are specified, only those are printed. Otherwise family and style are printed, unless verbose output is requested.
fc-match	fc-match matches pattern (empty pattern by default) using the normal fontconfig matching rules to find the best font available. If --sort is given, the sorted list of best matching fonts is displayed. The --all option works like --sort except that no pruning is done on the list of fonts.
fc-pattern	fc-pattern parses pattern (empty pattern by default) and shows the parsed result. If --config is given, config substitution is performed on the pattern before being displayed. If --default is given, default substitution is performed on the pattern before being displayed.
fc-query	fc-query queries font-file(s) using the normal fontconfig rules and prints out font pattern for each face found. If --index is given, only one face of each file is queried, otherwise all faces are queried.
fc-scan	fc-scan scans file(s) recursively and prints out font pattern for each face found.
fc-solve	fc-solve - automated solver for Freecell and related Solitiare variants
fc-validate	fc-validate validates font-file(s) if each fonts satisfies the language coverage according to the orthography files in fontconfig. If --index is given, only one face of each file is validated, otherwise all faces are validated.
ffmpeg	ffmpeg is a very fast video and audio converter that can also grab from a live audio/video source. It can also convert between arbitrary sample rates and resize video on the fly with a high quality polyphase filter.
ffprobe	ffprobe gathers information from multimedia streams and prints it in human- and machine-readable fashion. For example it can be used to check the format of the container used by a multimedia stream and the format and type of each media stream contained in it.
fftw-wisdom	fftw-wisdom is a utility to generate FFTW wisdom files, which contain saved information about how to optimally compute (Fourier) transforms of various sizes. FFTW is a free library to compute discrete Fourier transforms in one or more dimensions, for arbitrary sizes, and of both real and complex data, among other related operations. More information on FFTW can be found at the FFTW home page: http://www.fftw.org
fftw-wisdom-to-conf	fftw-wisdom-to-conf is a utility to generate C configuration routines from FFTW wisdom files, where the latter contain saved information about how to optimally compute (Fourier) transforms of various sizes. A configuration routine is a C subroutine that you link into your program, replacing a routine of the same name in the FFTW library, that determines which parts of FFTW are callable by your program.
fftwf-wisdom	fftwf-wisdom is a utility to generate FFTW wisdom files, which contain saved information about how to optimally compute (Fourier) transforms of various sizes. FFTW is a free library to compute discrete Fourier transforms in one or more dimensions, for arbitrary sizes, and of both real and complex data, among other related operations. More information on FFTW can be found at the FFTW home page: http://www.fftw.org
fh2raw
fh2svg
fh2text
FileCheck80
fill
find-all-symbols80
find-freecell-deal-index.py
findsmb	findsmb is a perl script that prints out several pieces of information about machines on a subnet that respond to SMB name query requests.
fire
fish	fish is a command-line shell written mainly with interactive use in mind. The full manual is available in HTML by using the help command from inside fish.
fish_indent	fish_indent is used to indent a piece of fish code. fish_indent reads commands from standard input and outputs them to standard output or a specified file.
fish_key_reader	fish_key_reader is used to study input received from the terminal and can help with key binds. The program is interactive and works on standard input. Individual characters themselves and their hexadecimal values are displayed.
five-or-more	five-or-more is the GNOME port of the once popular Windows game called Colour Lines. The game's objective is to align as often as possible five or more objects of the same colour and shape causing them to disappear.
fix-qdf	fix-qdf - repair PDF files in QDF form after editing
fixdlsrps	Fixdlsrps is a perl filter which "fixes" PostScript generated from the DviLaser/PS driver so that it works correctly with Angus Duggan's psutils package.
fixfmps	fixfmps - filter to fix Framemaker documents so PSUtils work
fixmacps	fixmacps - filter to fix Macintosh documents with saner version of md
fixproc	Fixes a process named "proc" by performing the specified action. The actions can be check, kill, restart, exist, or fix. The action is specified on the command line or is read from a default database, which describes the default action to take for each process. The database format and the meaning of each action are described below.
fixpsditps	Fixpsditps is a perl filter which "fixes" PostScript from Transcript's psdit program so that it works correctly with Angus Duggan's psutils package.
fixpspps	fixpspps - filter to fix PSPrint PostScript so PSUtils work
fixscribeps	fixscribeps - filter to fix Scribe documents so PSUtils work
fixtpps	fixtpps - filter to fix Tpscript documents to work with PSUtils
fixwfwps	Fixwfwps is a perl filter which "fixes" PostScript from Word for Windows so that it works correctly with Angus Duggan's psutils package.
fixwpps	fixwpps - filter to fix WP documents so PSUtils work
fixwwps	Fixwwps is a perl filter which "fixes" PostScript from Windows Write so that it works correctly with Angus Duggan's psutils package.
flac	flac is a command-line tool for encoding, decoding, testing and analyzing FLAC streams.
flat-clip
fmfconv	fmfconv -- Fuse Movie File converter
fogcoord
folks-import
folks-inspect
foomatic-combo-xml	The Foomatic acceleration engine written in C (by Till), it computes printer/driver combo XML files and the printer overview XML file.
foomatic-compiledb	foomatic-compiledb - Compile the Foomatic printer/driver database
foomatic-configure	foomatic-configure - the main configuration program of the foomatic printing system.
foomatic-perl-data	foomatic-perl-data - generate Perl data structures from XML
foomatic-ppd-options	The foomatic-ppd-options program reads the specified PPD files or stdin and decodes the PPD file to produce a list of options. This is really just a text based version of other print configuration tools.
foomatic-ppd-to-xml
foomatic-ppdfile	foomatic-ppdfile - Generate a PPD file for a given printer/driver combo
foomatic-printjob	foomatic-printjob - manage printer jobs in a spooler-independent fashion
foomatic-searchprinter
four-in-a-row	Four-in-a-Row - four-in-a-row game for GNOME; The object of the game is to build a line of four of your marbles while trying to stop your opponent (human or computer) building a line of his or her own. A line can be horizontal, vertical or diagonal.
fplight
fragcoord
freecell-solver-fc-pro-range-solve
freecell-solver-multi-thread-solve
freecell-solver-range-parallel-solve
freetype-config	freetype-config - Get information about a libfreetype installation
fribidi
fribidi-config
fs-tri
fsfs-access-map
fsfs-stats
fslight
fsraytrace
funzip	funzip - filter for extracting from a ZIP archive in a pipe
fuse	Fuse is a Sinclair ZX Spectrum emulator. It supports several models (including the 128), with quite faithful emulation of the display and sound.
fuse-ext2
fuse-ext2.probe
Back to Top

Content G[edit]

Utility	Description

g-ir-annotation-tool
g-ir-compiler	g-ir-compiler converts one or more GIR files into one or more typelib. The output will be written to standard output unless the --output is specified.
g-ir-generate	g-ir-generate is an GIR generator, using the repository API. It generates GIR files from a raw typelib or in a shared library (--shlib). The output will be written to standard output unless the --output is specified.
g-ir-inspect
g-ir-scanner	g-ir-scanner is a tool which generates GIR XML files by parsing headers and introspecting GObject based libraries. It is usually invoked during the normal build step for a project and the information is saved to disk and later installed, so that language bindings and other applications can use it. Header files and source files are passed in as arguments on the command line. The suffix determines whether a file be treated as a source file (.c) or a header file (.h). Currently only C based libraries are supported by the scanner.
g++9
gacutil	gacutil is a tool used by developers to install versioned assemblies into the system Global Assembly Cache (GAC) to become part of the assemblies that are available for all applications at runtime.
gacutil2
gamma	gamma(), gammaf(), gamma_r(), and gammaf_r() are deprecated aliases for lgamma(), lgammaf(), lgamma_r(), and lgammaf_r(), respectively.
gamma4scanimage	The tool gamma4scanimage creates a gamma table in the format expected by scanimage. You can define a gamma, a shadow and a highlight value. You also can specify the size (maxin) and maximum output value (maxout) of the gamma table.
gapi2-codegen
gapi2-fixup
gapi2-parser
gapplication	gapplication - D-Bus application launcher
gbi	GBI stands for Graphical BSD installer.
gc	gc is a graph analogue to wc in that it prints to standard output the number of nodes, edges, connected components or clusters contained in the input files. It also prints a total count for all graphs if more than one graph is given.
gcc9
gcc-ar9
gcc-nm9
gcc-ranlib9
gcm-calibrate	gcm-import - GNOME Color Manager Calibrator Tool
gcm-import	gcm-import - GNOME Color Manager Calibrator Tool
gcm-inspect	gcm-import - GNOME Color Manager Calibrator Tool
gcm-picker	gcm-import - GNOME Color Manager Calibrator Tool
gcm-viewer	gcm-import - GNOME Color Manager Calibrator Tool
gconf-merge-tree
gconfsharp2-schemagen
gconftool-2	gconftool-2 - GNOME configuration tool; Each preference in the GConf repository is expressed as a key-value pair. A GConf preference key is an element in the GConf repository that corresponds to an application preference. Preference keys typically have simple values such as strings, integers, or lists of strings and integers.
gcov9
gcov-dump9
gcov-tool9
gcr-viewer
gd2copypal
gd2togif
gd2topng
gdbm_dump	The gdbm_dump utility creates a dump of the specified gdbm(3) database file. The name for the output dump file is supplied by the second argument (FILE). If not specified, the output goes to the standard error.
gdbm_load	gdbm_load - re-create a GDBM database from a dump file.
gdbmtool	The gdbmtool utility allows you to view and modify an existing GDBM database or to create a new one.
gdbus	gdbus - Tool for working with D-Bus objects
gdbus-codegen	gdbus-codegen is used to generate code and/or documentation for one or more D-Bus interfaces. The tool reads D-Bus Introspection XML[1] files and generates output files. The tool currently supports generating C code (via --generate-c-code) and Docbook XML (via --generate-docbook).
gdcmpgif
gdialog
gdiffmk	gdiffmk compares two groff(1), nroff(1), or troff(1) documents, file1 and file2, and creates an output which is file2 with added `margin character' (.mc) commands that indicate the differences.
gdk-pixbuf-csource	gdk-pixbuf-csource is a small utility that generates C code containing images, useful for compiling images directly into programs.
gdk-pixbuf-pixdata
gdk-pixbuf-query-loaders	gdk-pixbuf-query-loaders collects information about loadable modules for gdk-pixbuf and writes it to the default cache file location, or to stdout.
gdk-pixbuf-thumbnailer
gdlib-config
gdparttopng
gdtopng
gearbox
gears	gears - draw interlocking gears, for xscreensaver.
geartrain
gegl
gegl-imgcmp
genbrk	genbrk reads the break (boundary) rule source code from rule-file and creates a break iteration data file. Normally this data file has the .brk extension.
gencfu	gencfu reads confusable character definitions in the input file, which are plain text files containing confusable character definitions in the input format defined by Unicode UAX39 for the files confusables.txt and confusablesWholeScript.txt. This source (.txt) format is also accepted by ICU spoof detectors. The files must be encoded in utf-8 format, with or without a BOM.
gencnval	gencnval converts the ICU aliases file converterfile into the binary file cnvalias.icu. This binary file can then be read directly by ICU, or used by pkgdata(1) for incorporation into a larger archive or library.
gendict	gendict reads the word list from dictionary-file and creates a string trie dictionary file. Normally this data file has the .dict extension.
genmipmap
genrb	genrb converts the resource bundle source files passed on the commandline to their binary form or to a Java source file for use with ICU4J. The resulting binary files have a .res extension while resource bundle source files typically have a .txt extension. Java source files have a java extension and follow the ICU4J naming conventions.
gentest	gentest - Run random generic SMB operations against two SMB servers and show the differences in behavior
gentrigrams
genxs	genxs is a tool for generating custom XML serialization writers and readers for classes.
geom-outlining-130
geom-outlining-150
geom-sprites
geom-stipple-lines
geom-wide-lines
getafm	Getafm generates a PostScript file which prints an AFM file for a font to the printer's output channel. The output of getafm should be sent to a printer, or to GhostScript.
getopt	The getopt utility is used to break up options in command lines for easy parsing by shell procedures, and to check for legal options.
gettext	The gettext program translates a natural language message into the user's language, by looking up the translation in a message catalog.
gettext.sh
gettextize	gettextize - install or upgrade gettext infrastructure
gfortran9
gif2rgb	gif2rgb - convert images saved as GIF to 24-bit RGB triplets
gif2webp	gif2webp - Convert a GIF image to WebP
gifbuild	gifbuild - dump GIF data in a textual format, or undump it to a GIF
gifclrmp	gifclrmp - extract colormaps from GIF images
giffix	giffix - attempt to fix up broken GIFs
giftext	giftext - dump GIF pixels and metadata as text
giftogd2
giftool	giftool - GIF transformation tool
gimp-2.10	gimp - an image manipulation and paint program.
gimp-test-clipboard-2.0
gimptool-2.0
gio	gio - To configure a project to use Giovanni simply put a `.giovanni.conf` file in the root directory of your project and run `gio deploy`.
gio-querymodules	gio-querymodules creates a giomodule.cache file in the listed directories. This file lists the implemented extension points for each module that has been found. It is used by GIO at runtime to avoid opening all modules just to find out which extension points they are implementing.
git	git - the stupid content tracker; Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. See gittutorial(7) to get started, then see giteveryday(7) for a useful minimum set of commands. The Git User's Manual[1] has a more in-depth introduction. After you mastered the basic concepts, you can come back to this page to learn what commands Git offers. You can learn more about individual Git commands with "git help command". gitcli(7) manual page gives you an overview of the command-line command syntax. A formatted and hyperlinked copy of the latest Git documentation can be viewed at https://git.github.io/htmldocs/git.html.
git-cvsserver	git-cvsserver - A CVS server emulator for Git; This application is a CVS emulation layer for Git. It is highly functional. However, not all methods are implemented, and for those methods that are implemented, not all switches are implemented.
git-p4.py
git-receive-pack	git-receive-pack - Receive what is pushed into the repository
git-shell	git-shell - Restricted login shell for Git-only SSH access
git-upload-archive	git-upload-archive - Send archive back to git-archive
git-upload-pack	git-upload-pack - Send objects packed back to git-fetch-pack
gjs-console
glewinfo
glib-compile-resources	glib-compile-resources reads the resource description from FILE and the files that it references and creates a binary resource bundle that is suitable for use with the GResource API. The resulting bundle is then written out as-is, or as C source for linking into an application.
glib-compile-schemas	glib-compile-schemas compiles all the GSettings XML schema files in DIRECTORY into a binary file with the name gschemas.compiled that can be used by GSettings. The XML schema files must have the filename extension .gschema.xml. For a detailed description of the XML file format, see the GSettings documentation.
glib-genmarshal	glib-genmarshal is a small utility that generates C code marshallers for callback functions of the GClosure mechanism in the GObject sublibrary of GLib. The marshaller functions have a standard signature, they get passed in the invoking closure, an array of value structures holding the callback function parameters and a value structure for the return value of the callback. The marshaller is then responsible to call the respective C code function of the closure with all the parameters on the stack and to collect its return value.
glib-gettextize	glib-gettextize helps to prepare a source package for being internationalized through gettext. It is a variant of the gettextize that ships with gettext.
glib-mkenums	glib-mkenums is a small perl-script utility that parses C code to extract enum definitions and produces enum descriptions based on text templates specified by the user. Most frequently this script is used to produce C code that contains enum values as strings so programs can provide value name strings for introspection.
glilypond	glilypond -- integrate lilypond parts into groff
glinfo
gloss
glsl-compile-time
glslstateschange
glsync
gltestperf
glthreads
glxcontexts
glxdemo
glxgears
glxgears_fbconfig
glxgears_pixmap
glxheads
glxinfo
glxpbdemo
glxpixmap
glxsnoop
glxswapcontrol
gml2gv	gml2gv converts a graph specified in the GML format to a graph in the GV (formerly DOT) format. gv2gml converts a graph specified in the GV format to a graph in the GML format.
gnome-2048
gnome-calendar	GNOME Calendar is a simple and beautiful calendar application designed to perfectly fit the GNOME desktop. By reusing the components which the GNOME desktop is build on, Calendar nicely integrates with the GNOME ecosystem.
gnome-chess	see ports collection
gnome-clocks	see ports collection
gnome-contacts	see ports collection
gnome-control-center	see ports collection
gnome-dictionary	see ports collection
gnome-doc-prepare	see ports collection
gnome-doc-tool	see ports collection
gnome-font-viewer	see ports collection
gnome-keyring-3	see ports collection
gnome-keyring-daemon	see ports collection
gnome-klotski	see ports collection
gnome-mahjongg	see ports collection
gnome-mines	see ports collection
gnome-mount	see ports collection
gnome-nibbles	see ports collection
gnome-open	see ports collection
gnome-photos	see ports collection
gnome-robots	see ports collection
gnome-screenshot	see ports collection
gnome-search-tool	see ports collection
gnome-shell	see ports collection
gnome-shell-extension-prefs	see ports collection
gnome-shell-extension-tool	see ports collection
gnome-shell-perf-tool	see ports collection
gnome-sudoku	see ports collection
gnome-system-log	see ports collection
gnome-system-monitor	see ports collection
gnome-taquin	see ports collection
gnome-tetravex	see ports collection
gnome-thumbnail-font	see ports collection
gnome-todo	see ports collection
gnomevfs-cat	Gstreamer gnomevfs plugin
gnomevfs-copy	Gstreamer gnomevfs plugin
gnomevfs-df	Gstreamer gnomevfs plugin
gnomevfs-info	Gstreamer gnomevfs plugin
gnomevfs-ls	Gstreamer gnomevfs plugin
gnomevfs-mkdir	Gstreamer gnomevfs plugin
gnomevfs-monitor	Gstreamer gnomevfs plugin
gnomevfs-mv	Gstreamer gnomevfs plugin
gnomevfs-rm	Gstreamer gnomevfs plugin
gnote	see ports collection
gnuchess	see ports collection
gnuchessu	see ports collection
gnuchessx	see ports collection
gnutls-cli	gnutls-cli - GnuTLS client; Simple client program to set up a TLS connection to some other com puter. It sets up a TLS connection and forwards data from the standard input to the secured socket and vice versa.
gnutls-cli-debug	gnutls-cli-debug - GnuTLS debug client
gnutls-serv	gnutls-serv - GnuTLS server
gobject-query	gobject-query is a small utility that draws a tree of types. gobject-query takes a mandatory argument that specifies whether it should iterate over the fundamental types or print a type tree.
gpatch	patch takes a patch file patchfile containing a difference listing produced by the diff program and applies those differences to one or more original files, producing patched versions. Normally the patched versions are put in place of the originals. Backups can be made; see the -b or --backup option. The names of the files to be patched are usually taken from the patch file, but if there's just one file to be patched it can be specified on the command line as originalfile.
gperl	gperl - groff preprocessor for Perl parts in roff files
gpg2	gpg2 - OpenPGP encryption and signing tool
gpg-agent	gpg-agent - Secret key management for GnuPG
gpg-connect-agent	The gpg-connect-agent is a utility to communicate with a running gpgagent. It is useful to check out the commands gpg-agent provides using the Assuan interface. It might also be useful for scripting simple applications. Input is expected at stdin and out put gets printed to stdout.
gpg-error
gpg-error-config	gpg-error-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use Libgpg-error. It is also used internally to the .m4 macros for GNU autoconf that are included with Libgpg-error.
gpg-wks-server
gpgconf	gpgconf - Modify .gnupg home directories
gpgme-config
gpgme-json
gpgme-tool
gpgparsemail	gpgparsemail - Parse a mail message into an annotated format
gpgrt-config
gpgscm
gpgsm	gpgsm is a tool similar to gpg to provide digital encryption and signing services on X.509 certificates and the CMS protocol. It is mainly used as a backend for S/MIME mail processing. gpgsm includes a full featured certificate management and complies with all rules defined for the German Sphinx project.
gpgtar
gpgv2	gpgv2 is an OpenPGP signature verification tool.
gphoto2-config
gphoto2-port-config
gphotofs
gpinyin	gpinyin - Chinese European-like writing within groff
gprof	The gprof utility produces an execution profile of C, Pascal, or Fortran77 programs. The effect of called routines is incorporated in the profile of each caller.
gr2fonttest
granite-demo
grap2graph	grap2graph - convert a grap diagram into a cropped bitmap image
graphml2gv	graphml2gv converts a graph specified in the GRAPHML format to a graph in the GV (formerly DOT) format.
gresource	gresource offers a simple commandline interface to GResource. It lets you list and extract resources that have been compiled into a resource file or included in an elf file (a binary or a shared library).
greytiff
grl-inspect-0.3	grl-inspect is a tool that prints out information on available Grilo sources and metadata keys. When executed with no SOURCE argument, grlinspect will print the list of all plugins and sources. When executed with a SOURCE, grl-inspect will print information about that source.
grl-launch-0.3	grl-launch is a tool that allows the user to run Grilo operations from the command line.
grn	grn - groff preprocessor for gremlin files
grodvi	grodvi is a driver for groff that produces TeX dvi format. Normally it should be run by groff -Tdvi. This will run troff -Tdvi; it will also input the macros in /usr/share/tmac/dvi.tmac.
groff	groff - front-end for the groff document formatting system
groffer	The groffer program is the easiest way to use groff(1). It can display arbitrary documents written in the groff(7) language or other roff(7) languages that are compatible to the original troff language. The groffer program also includes many of the features for finding and displaying the UNIX manual pages (man pages), such that it can be used as a replacement for a man(1) program.
grog	grog - guess options for groff command
grolbp	grolbp - groff driver for Canon CAPSL printers (LBP-4 and LBP-8 series laser printers)
grolj4	grolj4 is a driver for groff that produces output in PCL5 format suitable for an HP Laserjet 4 printer.
gropdf	gropdf translates the output of GNU troff to PDF.
grops	grops translates the output of GNU troff to PostScript.
grotty	grotty - groff driver for typewriter-like devices
growisofs	growisofs - combined mkisofs frontend/DVD recording program.
gs	gs - Ghostscript (PostScript and PDF language interpreter and previewer)
gs-tri
gsbj	gsbj - Format and print text for BubbleJet printer using ghostscript
gsdj	gsdj - Format and print text for DeskJet printer using ghostscript
gsdj500	gsdj500 - Format and print text for DeskJet 500 BubbleJet using ghostscript
gsettings	gsettings - GSettings configuration tool
gsettings-data-convert	gsettings-data-convert reads values out of the users GConf database and stores them in GSettings.
gsettings-schema-convert	gsettings-schema-convert converts between GConf and GSettings schema file formats. Note that the conversion is not expected to be fully automated. You are expected to verify and edit the result of the conversion.
gsf	gsf is a simple archive utility, somewhat similar to tar(1). It operates on files following one of the structured file formats understood by the G Structured File library, for example, Microsoft Excel(TM) files.
gsf-office-thumbnailer	gsf-office-thumbnailer is used internally by GNOME applications such as nautilus to generate thumbnails of several types of office application files. While it is possible to invoke it manually, it is usually invoked automatically by nautilus.
gsf-vba-dump	gsf-vba-dump - extract Visual Basic for Applications macros Various Microsoft binary data formats, including Excel (.xls), Word (.doc) and PowerPoint (.ppt) can embed macro code streams. These macro streams are in P-code (intermediate language) compiled from Visual Basic for Applications (VBA). The gsf-vba-dump utility extracts these macro streams.
gslj	gslj - Format and print text for LaserJet printer using ghostscript
gslp	gslp - Format and print text using ghostscript
gsnd	gsnd - Run ghostscript (PostScript and PDF engine) without display
gsound-play
gsraytrace
gst-device-monitor-1.0	gst-device-monitor-1.0 is a command line tool that can be used to test GStreamer's device monitoring functionality. By default it will just print a list of all devices found and exit, but you can also make it wait around for more devices by passing the --follow option. You can also pass it one or more filter arguments to filter the kind of devices you are interested in.
gst-discoverer-1.0	gst-discoverer-1.0 is a tool that can be used to print basic metadata and stream information about a media file. It can be run on individual files or whole directories. It will recurse into sub-directories in that case.
gst-inspect-1.0	gst-inspect is a tool that prints out information on available GStreamer plugins, information about a particular plugin, or information about a particular element. When executed with no PLUGIN or ELEMENT argument, gst-inspect will print a list of all plugins and elements together with a summary. When executed with a PLUGIN or ELEMENT argument, gst-inspect will print information about that plug-in or element.
gst-launch-1.0	gst-launch is a tool that builds and runs basic GStreamer pipelines.
gst-play-1.0	gst-play-1.0 is a command line tool that can be used to test basic playback using the playbin element. You can pass it individual files, URIs or whole directories (in which case it will recurse into sub-di-rectories as well).
gst-stats-1.0
gst-typefind-1.0	gst-typefind uses the GStreamer type finding system to determine the relevant GStreamer plugin to parse or decode file, and the corresponding media type.
gtar	tar - an archiving utility
gtester	gtester is a utility to run unit tests that have been written using the GLib test framework.
gtester-report	gtester-report is a script which converts the XML output generated by gtester into HTML.
gtf	Gtf is a utility for calculating VESA GTF modes. Given the desired horizontal and vertical resolutions and refresh rate (in Hz), the parameters for a matching VESA GTF mode are printed out. Two output formats are supported: mode lines suitable for the Xorg xorg.conf(5) file, and mode parameters suitable for the Linux fbset(8) utility.
gtk3-demo
gtk3-demo-application
gtk3-icon-browser
gtk3-widget-factory
gtk-builder-convert
gtk-builder-tool
gtk-demo
gtk-encode-symbolic-svg
gtk-launch
gtk-query-immodules-2.0
gtk-query-immodules-3.0
gtk-query-settings
gtk-update-icon-cache
gtkhtml3-editor-test
gucharmap
guild
guile	GNU Guile is an implementation of the Scheme programming language. It extends the R5RS and R6RS language standards, providing additional features necessary for real-world use.
guile-config
guile-snarf
gupnp-binding-tool-1.2
gv2gml	gml2gv converts a graph specified in the GML format to a graph in the GV (formerly DOT) format. gv2gml converts a graph specified in the GV format to a graph in the GML format.
gvcolor	gvcolor is a filter that sets node colors from initial seed values. Colors flow along edges from tail to head, and are averaged (as HSB vectors) at nodes. The graph must already have been processed by dot. Appropriate choice of initial colors yields drawings in which node colors help to emphasize logical relationships between nodes, even when they are spread far apart in the layout.
gvfs-cat	gvfs-cat concatenates the given files and prints them to the standard output.
gvfs-copy	gvfs-copy copies a file from SOURCE to DEST, or multiple SOURCEs to DIRECTORY. gvfs-copy is similar to the traditional cp utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-info	gvfs-info shows information about the given locations. gvfs-info is similar to the traditional ls utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-less	gvfs-less executes less on the output of gvfs-cat. gvfs-less works just like the traditional less utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-ls	gvfs-ls lists information about the given locations. If no location is given, it defaults to the current directory. gvfs-ls is similar to the traditional ls utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-mime	gvfs-mime can query information about applications that are registered to handle a mime-type, or set the default handler for a mime-type.
gvfs-mkdir	gvfs-mkdir creates directories.
gvfs-monitor-dir	gvfs-monitor-dir - Monitor directories for changes; As long as gvfs-monitor-dir is running, it will print information about file creation, deletion, file content and attribute changes and mount and unmount operations inside the specified directories.
gvfs-monitor-file	gvfs-monitor-file - Monitor files for changes
gvfs-mount	gvfs-mount - Mounts the locations
gvfs-move	gvfs-move - Copy files
gvfs-open	gvfs-open opens files with the default application that is registered to handle files of this type.
gvfs-rename	gvfs-rename is similar to the traditional rename utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-rm	gvfs-rm - Delete files
gvfs-save	gvfs-save - Save standard input
gvfs-set-attribute	gvfs-set-attribute - Set file attributes
gvfs-trash	gvfs-trash - Move files or directories to the trash
gvfs-tree	gvfs-tree - List contents of directories in a tree-like format
gvgen	gvgen - generate graphs
gvimtutor
gvmap	gvmap takes as input a graph in DOT format, finds node clusters and produces a rendering of the graph as a geographic-style map, with clusters highlighted as countries, in xdot format.
gvmap.sh	gvmap.sh - pipeline for running gvmap
gvpack	gvpack reads in a stream of graphs, combines the graphs into a single layout, and produces a single graph serving as the union of the input graphs. The input graphs must be in dot format, and must have all necessary layout information. Acceptable input is produced by applying a Graphviz layout program, such as dot or neato, with no -T flag.
gvpr	gvpr (previously known as gpr) is a graph stream editor inspired by awk. It copies input graphs to its output, possibly transforming their structure and attributes, creating new graphs, or printing arbitrary information. The graph model is that provided by libcgraph(3). In particular, gvpr reads and writes graphs using the dot language.
gxl2gv	gxl2gv converts between graphs represented in GXL and in the GV language. Unless a conversion type is specified using a flag, gxl2gv will deduce the type of conversion from the suffix of the input file, a ".gv" suffix causing a conversion from GV to GXL, and a ".gxl" suffix causing a conversion from GXL to GV. If no suffix is available, e.g. when the input is from a pipe, and no flags are used then gxl2gv assumes the type of the input file from its executable name so that gxl2gv converts from GXL to GV, and gv2gxl converts from GV to GXL.
Back to Top

Content H[edit]

Utility	Description

h2ph	h2ph - convert .h C header files to .ph Perl header files
h2xs	h2xs - convert .h C header files to Perl extensions
hal-device
hal-disable-polling	hal-disable-polling can be used to to disable and enable media detection on drives with removable storage. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-find-by-capability	hal-get-capability finds device object in the HAL device database by looking at device capabilities. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-find-by-property	hal-get-property finds device object in the HAL device database by looking at device properties. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-get-property	hal-get-property retrieves a property from a device object in the HAL device database. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-is-caller-locked-out	hal-is-caller-locked-out determines if a specific caller is locked out of a specific D-Bus interface on a specific device. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-is-caller-privileged	hal-is-caller-privileged determines if a specific caller is privileged for a given PolicyKit action on given device. For more information about both the big picture, HAL and PolicyKit , refer to the HAL spec (which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution) and also the PolicyKit documentation.
hal-lock	hal-lock can be used to acquire a lock on a given interface either on a given device or globally. For more information about both the big picture and the semantics of HAL locks, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-set-property	hal-set-property sets a property on a device object in the HAL device database. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hb-ot-shape-closure
hb-shape
hb-subset
hitori
hmac256	This is a standalone HMAC-SHA-256 implementation used to compute an HMAC-SHA-256 message authentication code. The tool has originally been developed as a second implementation for Libgcrypt to allow comparing against the primary implementation and to be used for internal consistency checks. It should not be used for sensitive data because no mechanisms to clear the stack etc are used.
hmaptool80
hpftodit	hpftodit creates a font file for use with a Hewlett-Packard Laser- Jet 4-series (or newer) printer with groff -Tlj4, using data from an HP tagged font metric (TFM) file. tfm_file is the name of the TFM file for the font; Intellifont and TrueType TFM files are supported, but symbol set TFM files are not. map_file is a file giving the groff names for characters in the font;
httpcfg	httpcfg - Mono Certificate Management for HttpListener; This tool is used to manage the certificates used by the HttpListener embeddable server class when the HttpListener is configured as an HTTPS server instead of an HTTP server.
hunspell	hunspell - spell checker, stemmer and morphological analyzer
hunzip	hunzip - decompress and decrypt hzip files to the standard output
hzip	hunzip is a small utility for text file compression and encryption, especially for sorted dictionaries. "hunspell filename" creates the compressed file "filename.hz" without removing the original file.
Back to Top

Content I[edit]

Utility	Description

iagno	Iagno is a two-player strategy game similar to Go. The board is 8 by 8 with tiles that are black on one side and white on the other side. The object of Iagno is to flip as many of your opponent's tiles to your color as possible without your opponent flipping your tiles. This is done by trapping your opponent's tiles between two tiles of your own color.
ibus	ibus is a command line utility which can restart or exit ibus-daemon, get or set the current ibus engine or list the ibus engines. Homepage: https://github.com/ibus/ibus/wiki
ibus-daemon	ibus-daemon is a daemon program for ibus and it is also a start up program for users to activate ibus daemon, engines and panel.
ibus-setup	ibus-setup - configuration program for ibus
iccdump
iccgamut
icclu
iconv	The iconv utility converts the codeset of file (or from standard input if no file is specified) from codeset from_name to codeset to_name and outputs the converted text on standard output.
icu-config	icu-config simplifies the task of building and linking against ICU as compared to manually configuring user makefiles or equivalent. Because icu-config is an executable script, it also solves the problem of locating the ICU libraries and headers, by allowing the system PATH to locate it.
icuinfo
identity
idevice_id	idevice_id - Prints device name or a list of attached devices.
idevicebackup	idevicebackup - Create or restore backup for devices.
idevicebackup2
idevicecrashreport	idevicecrashreport - Retrieve crash reports from a device.
idevicedate	idevicedate - Display the current date or set it on a device.
idevicedebug	idevicedebug - Interact with the debugserver service of a device.
idevicedebugserverproxy
idevicediagnostics	idevicediagnostics - Interact with the diagnostics interface of a device.
ideviceenterrecovery	ideviceenterrecovery - Make a device enter recovery mode.
ideviceimagemounter	ideviceimagemounter - Mount disk images on the device.
ideviceinfo	ideviceinfo - Show information about the first connected device.
idevicename	idevicename - Display the device name or set it to NAME if specified.
idevicenotificationproxy	idevicenotificationproxy - Post or observe notifications on a device.
idevicepair	idevicepair - Manage host pairings with devices and usbmuxd.
ideviceprovision	ideviceprovision - Manage provisioning profiles on a device.
idevicescreenshot	idevicescreenshot - Gets a screenshot from the connected device.
idevicesyslog	idevicesyslog - Relay syslog of a connected device.
idle2.7
idle3.6
idle3.7
idn	idn - Internationalized Domain Names command line tool; Internationalized Domain Name (IDN) convert STRINGS, or standard input. Command line interface to the internationalized domain name library. All strings are expected to be encoded in the preferred charset used by your locale. Use `--debug' to find out what this charset is. You can override the charset used by setting environment variable CHARSET. To process a string that starts with `-', for example `-foo', use `--' to signal the end of parameters, as in `idn --quiet -a -- -foo'. Mandatory arguments to long options are mandatory for short options too.
idn2
ifuse	ifuse - Mount directories of an iOS device locally using fuse. Mount directories of an iOS device locally using fuse. By default the media directory is mounted, options allow to also mount the sandbox container of an app, an app's documents folder or even the root filesystem on jailbroken devices.
ikdasm
ilasm	ilasm is the Mono ILAsm assembler. You can pass one or more options to drive the compiler, and a set of source files.
illumread
img2webp
imgcmp	The imgcmp command compares two images of the same geometry with respect to a given metric. Please use the --help command line switch and the JasPer Software Reference Manual for more information.
imginfo	The imginfo command displays information about an image. Please use the --help command line switch and the JasPer Software Reference Manual for more information.
includeres	Includeres includes resources (fonts, procsets, patterns, files, etc) in place of %%IncludeResource comments in a PostScript document. The resources are searched for in the current directory and the system default directory under the resource name, and with an appropriate extension.
indexinfo
indxbib	indxbib - make inverted index for bibliographic databases
innochecksum	innochecksum prints checksums for InnoDB files. This tool reads an InnoDB tablespace file, calculates the checksum for each page, compares the calculated checksum to the stored checksum, and reports mismatches, which indicate damaged pages. It was originally developed to speed up verifying the integrity of tablespace files after power outages but can also be used after file copies. Because checksum mismatches will cause InnoDB to deliberately shut down a running server, it can be preferable to use this tool rather than waiting for a server in production usage to encounter the damaged pages.
install-printerdriver
installvst
instmodsh	instmodsh - A shell to examine installed modules
invprofcheck
ipers
ipf-mod.pl
ippfind	ippfind - find internet printing protocol printers
iproxy
iptc
irb26
iso-info	iso-info - shows Information about an ISO 9660 image
iso-read	iso-read - reads portions of an ISO 9660 image
isodebug	isodebug - print genisoimage debug info from ISO-9660 image
isodump	devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
isoinfo	devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
isosurf
isovfy	devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
ispellaff2myspell
Back to Top

Content J[edit]

Utility	Description

jasper	The jasper command converts to and from JPEG-2000 files.
javavm	The Java VM wrapper provides a convenient system for switching between different Java VMs. It also provides symbolic links in /usr/local/bin to allow the use of the Java executables without having to add the specific Java VM executable directories to the PATH environment variable.
jbgtopbm	jbgtopbm - JBIG1 to portable bitmap file converter
jbgtopbm85
jbig2dec	jbig2dec - File format converter specialized in JBIG2 decoding
jiv	The jiv command displays a JPEG-2000 image on an X display. Use the arrow keys for scrolling and < and > for zooming. Please use the --help command line switch and the JasPer Software Reference Manual for more information.
jmtpfs
jpegicc	jpegicc - little cms ICC profile applier for JPEG.
jpegtran	jpegtran performs various useful transformations of JPEG files. It can translate the coded representation from one variant of JPEG to another, for example from baseline JPEG to progressive JPEG or vice versa. It can also perform some rearrangements of the image data, for example turning an image from landscape to portrait format by rotation.
jpgicc	jpgicc - little cms ICC profile applier for JPEG.
js24
js24-config
js52
js52-config
js60
js60-config
json_pp	json_pp converts between some input and output formats (one of them is JSON). This program was copied from json_xs and modified.
json_reformat
json_verify
json-glib-format
json-glib-validate
Back to Top

Content K[edit]

Utility	Description

kactivities-cli
katalyzer	katalyzer analyzes Kate streams and displays information about them. The type of information to select is selectable on the command line. Several multiplexed Kate streams may be analyzed at the same time.
kate	kate - Advanced text editor for KDE
kate-syntax-highlighter
katedec	katedec - decodes Kate streams to a textual description
kateenc	kateenc - create Kate streams from text input
kbuildsycoca5	kbuildsycoca5 - Rebuilds the KService desktop file system configuration cache.
kbxutil
kcookiejar5	kcookiejar5 is a command line interface to the HTTP cookie store used by KDE, a D-BUS service to store/retrieve/clean cookies.
kdebugdialog5
kded5	kded5 consolidates several small services in one process. These are mostly D-Bus services provided by KDED modules, but it also manages sycoca (a binary cache of servicetypes, mimetypes and services used by KService) and KConfig update scripts as needed.
kdeinit5	kdeinit5 is a process launcher somewhat similar to the famous init used for booting UNIX. It executes KDE programs and kdeinit loadable modules (KLMs) starting them more efficiently.
kdeinit5_shutdown
kdeinit5_wrapper	kdeinit5_wrapper, kshell5 and kwrapper5 are programs thatstart programs via kdeinit.
key2raw
key2text
key2xhtml
kf5-config	kf5-config is a command line program used to retrieve information about Frameworks installation or user paths.
kgendesignerplugin	kgendesignerplugin - Generates widget plugins for Qt(TM) Designer.
kglobalaccel5
kiconfinder5
kile	Kile - an Integrated LaTeX Editing Environment
kjs5	kjs5 - KDE ECMAScript compatible interpreter
kodak2ti3
kpackagelauncherqml
kpackagetool5	kpackagetool5 - Install, list, remove Plasma packages
kpat	KPat (aka KPatience) is a relaxing card sorting game. To win the game a player has to arrange a single deck of cards in certain order amongst each other.
kquitapp5
kreadconfig5
ksba-config
ksh93	ksh, rksh, pfksh - KornShell, a standard/restricted command and programming language
kshell5	kdeinit5_wrapper, kshell5 and kwrapper5 are programs thatstart programs via kdeinit.
ktelnetservice5
ktrash5
kwallet-query	kwallet-query comes in handy when shell scripts need to read or update the KDE Wallet. It works by manipulating the entries displayed in the KDE Wallet Manager utility. It's only parameter is the walletname the tool should read or update. The operation mode is specified by the options.
kwalletd5
kwrapper5	kdeinit5_wrapper, kshell5 and kwrapper5 are programs thatstart programs via kdeinit.
kwrite	KWrite is a text editor by KDE, based on the Kate's editor component.
kwriteconfig5
Back to Top

Content L[edit]

Utility	Description

lame	lame Fast MP3 encoder kit
lc	lc tool is a license compiler for Mono. It's used to convert a licenses.licx file to a resource that can be embedded into an executable.
ld	ld combines a number of object and archive files, relocates their data and ties up symbol references. Usually the last step in compiling a program is to run ld.
ld.bfd
ld.gold
ld.lld80
ld64.lld80
ldapcompare	ldapcompare opens a connection to an LDAP server, binds, and performs a compare using specified parameters.
ldapdelete	ldapdelete - LDAP delete entry tool
ldapexop	ldapexop - issue LDAP extended operations
ldapmodify	ldapmodify, ldapadd - LDAP modify entry and LDAP add entry tools
ldapmodrdn	ldapmodrdn - LDAP rename entry tool
ldappasswd	ldappasswd - change the password of an LDAP entry
ldapsearch	ldapsearch - LDAP search tool
ldapurl	ldapurl extracts the components of the ldapuri option argument
ldapwhoami	ldapwhoami opens a connection to an LDAP server, binds, and performs a whoami operation.
lefty	lefty is a two-view graphics editor for technical pictures.
libart2-config
libassuan-config
libevdev-tweak-device
libgcrypt-config
libgtop_daemon2
libgtop_server2
libIDL-config-2
libinput	libinput - libinput-based X.Org input driver
libnetcfg	The libnetcfg utility can be used to configure the libnet. Starting from perl 5.8 libnet is part of the standard Perl distribution, but the libnetcfg can be used for any libnet installation.
libpng16-config	libpng - Portable Network Graphics (PNG) Reference Library 1.6.29
libwacom-list-local-devices
libwmf-config
libwmf-fontmap
lightsoff
linc-cleanup-sockets
line	line tries to determine the cache line size in bytes of the largest cache which is smaller than len bytes.
line-clip
line-cull
line-flat
line-smooth
line-stipple-wide
line-userclip
line-userclip-clip
line-userclip-nop
line-userclip-nop-clip
line-wide
line-xor
lineloop
lineloop-clip
lineloop-elts
linestrip
linestrip-clip
linestrip-flat-stipple
linestrip-stipple
linestrip-stipple-wide
linkicc	linkicc - little cms device link generator.
linktest
listbasic	listbasic extracts the BASIC listing from a ZX Spectrum snapshot or tape file and prints it to standard output.
lit2epub
lit80
live555HLSProxy
live555MediaServer
live555ProxyServer
lkbib	lkbib - search bibliographic databases
lklfuse
llc80
lld80
lld-link80
lldb80
lldb-argdumper80
lldb-mi80
lldb-server80
lldb-test80
lldb-vscode80
lli80
llvm-ar80
llvm-as80
llvm-bcanalyzer80
llvm-cat80
llvm-cfi-verify80
llvm-config80
llvm-cov80
llvm-cvtres80
llvm-cxxmap80
llvm-diff80
llvm-dis80
llvm-dlltool80
llvm-dwarfdump80
llvm-dwp80
llvm-elfabi80
llvm-exegesis80
llvm-extract80
llvm-link80
llvm-lit80
llvm-mc80
llvm-mca80
llvm-modextract80
llvm-mt80
llvm-nm80
llvm-objcopy80
llvm-objdump80
llvm-opt-report80
llvm-pdbutil80
llvm-profdata80
llvm-ranlib80
llvm-rc80
llvm-readelf80
llvm-readobj80
llvm-rtdyld80
llvm-size80
llvm-split80
llvm-stress80
llvm-strings80
llvm-strip80
llvm-symbolizer80
llvm-tblgen80
llvm-undname80
llvm-xray80
lneato	lneato - A Customizable Graph Editor
lobase	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
localc	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
locktest	locktest - Find differences in locking between two SMB servers
lodbias
lodraw	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
loffice	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
lofromtemplate	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
loimpress	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
bin/lomath	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
long-fixed-func
lookbib	lookbib - search bibliographic databases
loweb	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
lowntfs-3g	ntfs-3g - Third Generation Read/Write NTFS Driver
lowriter	libreoffice - LibreOffice office suite lobase, localc, lodraw, lofromtemplate, loimpress, lomath, loweb, lowriter
lp	lp -- front-end to the print spooler
lp_solve
lpoptions	lpoptions - display or set printer options and defaults
lpq	lpq -- spool queue examination program
lpr	lpr -- off line print
lprm	lprm -- remove jobs from the line printer spooling queue
lprsetup.sh
lpstat	lpstat - compatibility program to get information about printers
ls2ti3
lsattr	lsattr - list file attributes on a Linux second extended file system
lshal	lshal - list HAL devices
lua52	lua is the standalone Lua interpreter. It loads and executes Lua programs, either in textual source form or in precompiled binary form. (Precompiled binaries are output by luac, the Lua compiler.) lua can be used as a batch interpreter and also interactively.
luac52	luac is the Lua compiler. It translates programs written in the Lua programming language into binary files containing precompiled chunks that can be later loaded and executed.
lz4	lz4 - lz4, unlz4, lz4cat - Compress or decompress .lz4 files
lz4_decompress
Back to Top

Content M[edit]

Utility	Description

macpack	macpack - Macintosh OS X Packager for managed gui assemblies
make_pysol_freecell_board.py
makealias
makecert	MakeCert - Create X.509 certificates for test purposes
makeconv	makeconv converts the ICU converter table convertertable into a binary file. The binary file has the same base name as convertertable but has a .cnv extension (instead of the typical .ucm extension of the convertertable file). This binary file can then be read directly by ICU, or used by pkgdata(1) for incorporation into a larger archive or library.
makemhr
makepqg
mandelbrot
mangle
manywin
marco	Marco is a minimal X window manager that uses GTK+ for drawing window frames. It is aimed at non-technical users and is designed to integrate well with the MATE desktop. Marco is a plain window manager for the adult in you; Many window managers are like Marshmallow Froot Loops, Marco is like Cheerios. It lacks some features that may be expected by traditional UNIX or other technical users; these users may want to investigate other available window managers for use with MATE or as a standalone window manager.
marco-message	The marco-message command is used to perform some simple window manager tasks while Marco is running.
marco-theme-viewer	marco-theme-viewer allows you to preview any installed Marco theme. When designing a new Marco theme, you can use marco-theme-viewer to benchmark the performance of a window frame, and to preview it around different types of windows in various mock scenarios.
marco-window-demo	marco-window-demo - demo of window features This program demonstrates various kinds of windows that window managers and window manager themes should handle. Be sure to tear off the menu and toolbar, those are also a special kind of window.
markdown	markdown -- text to html conversion tool
markdown_py-2.7
masktest	masktest - Find differences in wildcard matching between Samba's implementation and that of a remote server.
mate-about	The mate-about program is a tool to learn more about MATE and who creates MATE. It contains an introduction about the project, and lists all contributors.
mate-about-me	mate-about-me -- is a control center applet.
mate-appearance-properties	mate-appearance-properties -- is a control center applet.
mate-at-properties	mate-at-properties - configure MATE Assistive Technologies
mate-calc
mate-calc-cmd
mate-color-select	The mate-color-select program is a tool to pick a color from a color palette or from screen. It is not meant to be used on its own, but as a MATE Desktop helper application.
mate-control-center	mate-control-center is a graphical user interface to configure various aspects of MATE. When run without arguments, the shell displays the control center overview, which shows all available configuration panels. The overview allows one to open individual panels by clicking on them. It also has a search entry to find panels by searching keywords.
mate-default-applications-properties
mate-desktop-item-edit	mate-desktop-item-edit - A small tool to edit .desktop files.
mate-dictionary	mate-dictionary - Look up words on dictionaries
mate-disk-usage-analyzer	baobab is able to scan either specific folders or the whole filesystem (local and remote), in order to give the user a graphical tree representation including each directory size or percentage in the branch. It also auto-detects in real-time any change made to your home directory as far as any mounted/unmounted device. A graphical treemap window is also provided for any selected folder.
mate-display-properties	mate-display-properties - customize MATE display behavor
mate-font-viewer	mate-font-viewer - preview fonts
mate-keybinding-properties	mate-keybinding-properties - configure MATE keybindings; This executable is part of the package 'mate-control-center': The MATE Control Center. The MATE keybindings preference tool enables you to display the default keyboard shortcuts and customize them to your requirements. You can also create hot keys. Hot keys are keyboard shortcuts that start applications or perform other useful actions.
mate-keyboard-properties	mate-keyboard-properties - manage keyboard behaviour in MATE; This executable is part of the package 'mate-control-center': The MATE Control Center. Keyboard Preferences manages all settings related to the keyboard in a MATE environment. This includes key repeat delay, cursor blinking, lay outs and layout options. You can also configure a typing break which locks the screen and enforces a break from work.
mate-mouse-properties	mate-mouse-properties - configure MATE mouse preferences
mate-network-properties	mate-network-properties - configure MATE network proxy
mate-notification-properties	mate-notification-properties - Set up the options for desktop notifications
mate-panel	The mate-panel program provides the panels for the the MATE Desktop Environment. It is the area on your desktop from which you can run applications and applets, and perform other tasks. New applets may also be installed, added to, or removed from the panels. By default, mate-panel typically creates a panel on the top of the screen with applets such as a Menu Bar, Notification Area, and Clock; While creating a second panel on the bottom of the screen with a Window List and a Workspace Switcher. Panels can be created, deleted, moved around the desktop, and to other monitors.
mate-panel-test-applets	mate-panel-test-applets display installed applets in a dialog box and allow you to test them.
mate-power-manager
mate-power-preferences
mate-power-statistics
mate-screensaver	MATE Screensaver is the default screen saver and locker for the MATE Desktop. It is designed with simplicity and security in mind. matescreensaver integrates well with the MATE desktop, and it supports User Switching and the ability to lock down configuration settings.
mate-screensaver-command	MATE Screensaver is the default screen saver and locker for the MATE Desktop. It is designed with simplicity and security in mind. matescreensaver integrates well with the MATE desktop, and it supports User Switching and the ability to lock down configuration settings.
mate-screensaver-preferences	mate-screensaver-preferences - Configure MATE Screensaver
mate-screenshot	mate-screenshot - capture the screen, a window, or an user-defined area and save the snapshot image to a file.
mate-search-tool	MATE Search Tool is a utility for finding files on your system. To perform a basic search, you can type a filename or a partial filename, with or without wildcards. To refine your search, you can apply additional search options.
mate-session	The mate-session program starts up the MATE desktop environment. This command is typically executed by your Login/Display Manager (like GDM, LXDM, XDM, SLiM, or from your X startup scripts like .xinitrc). It will load either your saved session, or it will provide a default session for the user as defined by the system administrator (or the default MATE installation on your system).
mate-session-inhibit	mate-session-inhibit can inhibit certain matesession functionality while executing the given COMMAND. To achieve this, it calls the Inhibit() method of the mate-session D-Bus API and creates an inhibitor. The inhibitor is automatically removed when mate-session-inhibit exits.
mate-session-properties	The mate-session-properties program enables the users to configure what applications should be started on login, in addition to the default startup applications configured on the system.
mate-session-save	The mate-session-save program can be used from a MATE session to either end the current MATE session or save a snapshot of the currently running applications (but not both). This session will be later restored at your next MATE session.
mate-system-log	MATE System Log Viewer is a simple utility to display system log files.
mate-system-monitor	The mate-system-monitor allows you to view and control the processes running on your system. You can access detailed memory maps, send signals, and terminate the processes.
mate-terminal	mate-terminal - manual page for MATE Terminal Emulator
mate-terminal.wrapper
mate-thumbnail-font	mate-thumbnail-font is a command-line tool for creating thumbnails of PCF fonts.
mate-typing-monitor	mate-typing-monitor - configure MATE network proxy This executable is part of the package 'mate-control-center': The MATE Control Center. If you use too much computer you may be risking your health. Use this tool for reminding yourself to take little (typing) breaks in regular intervals.
mate-volume-control	The MATE Volume Control application is an audio mixer that enables you to mix audio and adjust volume levels of various audio mixer devices on your system.
mate-volume-control-status-icon
mate-window-properties	mate-window-properties - configure MATE network proxy
mate-wm	mate-wm - Start the window manager configured by the user
mautil	The mautil tool works with Mono.Addins repositories and packages.
mconfig	mconfig can be used to edit .NET configuration files, by adding "features" (that is sets of xml statements) defined in one of the config files read by mconfig. The config file can also define layouts of default configuration files, which may be useful for bootstrapping your .NET projects.
mcs	mcs is the Mono C# compiler, an implementation of the ECMA-334 language specification. You can pass one or more options to drive the compiler, and a set of source files. Extra options or arguments can be provided in a response file. Response files are referenced by prepending the @ symbol to the response file name.
mdassembler	mdassembler - Compile documentation for use in monodoc browser
mdb_copy	The mdb_copy utility copies an LMDB environment. The environment can be copied regardless of whether it is currently in use. No lockfile is created, since it gets recreated at need.
mdb_dump	The mdb_dump utility reads a database and writes its contents to the standard output using a portable flat-text format understood by the mdb_load(1) utility.
mdb_load	The mdb_load utility reads from the standard input and loads it into the LMDB environment envpath.
mdb_stat	The mdb_stat utility displays the status of an LMDB environment.
mdbrebase
mdoc	mdoc - Mono documentation management tool
mdoc-assemble	mdoc assemble creates .tree and .zip files from PATHS for use in the monodoc(1) documentation browser.
mdoc-export-html	mdoc export-html creates HTML files from the mdoc(5)-formatted documentation XML files within DIRECTORIES.
mdoc-export-msxdoc	mdoc export-msxdoc creates Microsoft XML Documentation (as produced by csc /doc) from the mdoc(5)-formatted documentation XML files within DIRECTORIES.
mdoc-update	mdoc update is responsible for the following: Creating documentation stubs based on ASSEMBLIES. The stub-creation process will create new mdoc(5) XML files for each type within ASSEMBLIES, and provide documentation stubs for each member of those types. Update documentation stubs based on ASSEMBLIES. Existing mdoc(5) documentation can be updated to reflect changes within ASSEMBLIES, such as added types and members, while preserving existing documentation. In some limited circumstances, renames will be tracked, minimizing the documentation burden when e.g. a parameter is renamed.
mdoc-validate	mdoc validate - Validate XML documents against a schema
mdvalidater	mdvalidator has been obsoleted by mdoc(1). See the mdoc-validate(1) man page.
meinproc5	meinproc5 - KDE translator for XML
metacity	METACITY - minimal GTK3 Window Manager
metacity-message	METACITY-MESSAGE - a command to send a message to Metacity
metacity-theme-viewer	metacity-theme-viewer allows you to preview any installed Metacity theme.
metacity-window-demo	metacity-window-demo - demo of window features
metaflac	metaflac - program to list, add, remove, or edit metadata in one or more FLAC files.
mhddfs	mhddfs - The driver combines a several mount points into the single one.
mib2c	The mib2c tool is designed to take a portion of the MIB tree (as defined by a MIB file) and generate the template C code necessary to implement the relevant management objects within it.
mib2c-update	Use mib2c-update to generate your mib2c code templates, and it will track the original code and the changes you make to the code. If the mib2c template changes (bug fixes, enhances in later releases), re-running mib2c will update the template and then attempt to re-apply your changes.
midicat	The midicat utility receives MIDI data from the given input MIDI port and/or sends it to the given output MIDI port.
mikeyParse
miniunzip	minizip is a simple tool which allows the extraction of compressed file archives in the ZIP format used by the MS-DOS utility PKZIP. It was written as a demonstration of the zlib(3) library and therefore lack many of the features of the unzip(1) program.
minizip	minizip is a simple tool which allows the extraction of compressed file archives in the ZIP format used by the MS-DOS utility PKZIP. It was written as a demonstration of the zlib(3) library and therefore lack many of the features of the unzip(1) program.
mk_cmds	Mk_cmds converts a table listing command names and associated help messages into a C source file suitable for use with the ss(3) library.
mkbundle	mkbundle generates an executable program that will contain static copies of the assemblies listed on the command line. By default only the assemblies specified in the command line will be included in the bundle. To automatically include all of the dependencies referenced, use the "--deps" command line option.
mkfontdir	mkfontdir - create an index of X font files in a directory
mkfontscale	mkfontscale - create an index of scalable font files for X
mkisofs	mkisofs - create an hybrid ISO-9660/JOLIET/HFS/UDF filesystem-image with optional Rock Ridge attributes.
mm2gv	mm2gv converts a sparse matrix of the Matrix Market format to a graph in the GV (formerly DOT) format
mmc-tool
mmroff	mmroff is a simple preprocessor for groff, it is used for expanding references in mm, see groff_mm(7). groff is executed twice, first with -z and -rRef=1 to collect all references and then to do the real processing when the reference file is up to date.
mod
modularize80
modutil
mono-api-html
mono-api-info	mono-api-info - Expose IL structure of CLR assemblies as XML.
mono-boehm
mono-cil-strip	mono-cil-strip is a tool which takes an assembly, and empty its method bodies. This is useful to reduce an assembly size when an assembly has already been compiled using Mono's Ahead Of Time compiler (AOT), where the CIL code is no longer necessary, but the metadata still is.
mono-configuration-crypto	mono-configuration-crypto - Mono configuration utility to manage encryption keys and encrypt/decrypt config file sections
mono-find-provides
mono-find-requires
mono-gdb.py
mono-heapviz
mono-package-runtime
mono-service	mono-service, mono-service2 - Mono ServiceProcess host
mono-service2	mono-service, mono-service2 - Mono ServiceProcess host
mono-sgen
mono-sgen-gdb.py
mono-shlib-cop	mono-shlib-cop - Shared Library Usage Checker
mono-symbolicate	mono-symbolicate - Mono Symbolicate Tool
mono-test-install
mono-xmltool	mono-xmltool - Mono XML validation and transformation tool.
monodis	monodis - CIL image content dumper and disassembler.
monodocer	monodocer - ECMA Documentation Format Support
monodocs2html	monodocs2html - Translate Monodoc XML to HTML
monodocs2slashdoc
monograph
monolinker	monolinker is a CIL Linker. The linker is a tool one can use to only ship the minimal possible set of functions that a set of programs might require to run as opposed to the full libraries.
monop	monop, monop2 - Mono Class Outline Viewer
monop2	monop, monop2 - Mono Class Outline Viewer
morph3d	morph3d - 3d morphing objects. Another 3d shape-changing GL hack. It has the same shiny-plastic feel as Superquadrics, as many computer-generated objects do...
mouse-dpi-tool
mozcerts-qt5
mozo	Mozo is a menu editor for MATE using the freedesktop.org menu specification. It is a fork of Alacarte.
mozroots	mozroots - Download and import trusted root certificates from Mozilla's LXR into Mono's certificate store
mp3fs	mp3fs - mounts and transcodes FLACs to MP3s on the fly
mp3rtp
mpeg2dec	mpeg2dec - decode MPEG and MPEG2 video streams
MPEG2TransportStreamIndexer
mpg123	mpg123 - play audio MPEG 1.0/2.0/2.5 stream (layers 1, 2 and 3)
mpg123-id3dump
mpg123-strip
mpicalc
mppcheck
mpplu
mppprof
mprof-report	mprof-report(1) - The Mono log profiler can be used to collect a lot of information about a program running in the Mono runtime. This data can be used (both while the process is running and later) to do analyses of the program behaviour, determine resource usage, performance issues or even look for particular execution patterns.
msd-background-helper
msgattrib	msgattrib - attribute matching and manipulation on message catalog
msgcat	msgcat - combines several message catalogs
msgcmp	msgcmp - compare message catalog and template
msgcomm	msgcomm - match two message catalogs
msgconv	msgconv - character set conversion for message catalog
msgen	msgen - create English message catalog
msgexec	msgexec - process translations of message catalog
msgfilter	msgfilter - edit translations of message catalog
msgfmt	msgfmt - compile message catalog to binary format
msggrep	msggrep - pattern matching on message catalog
msginit	msginit - initialize a message catalog
msgmerge	msgmerge - merge message catalog and template
msgunfmt	msgunfmt - uncompile message catalog from binary format
msguniq	msguniq - unify duplicate translations in message catalog; Unifies duplicate translations in a translation catalog. Finds duplicate translations of the same message ID. Such duplicates are invalid input for other programs like msgfmt, msgmerge or msgcat. By default, duplicates are merged together. When using the --repeated option, only duplicates are output, and all other messages are discarded. Comments and extracted comments will be cumulated, except that if --use-first is specified, they will be taken from the first translation. File positions will be cumulated. When using the --unique option, duplicates are discarded.
mtdev-test
mtp-albumart
mtp-albums
mtp-connect
mtp-detect
mtp-emptyfolders
mtp-files
mtp-filetree
mtp-folders
mtp-format
mtp-getplaylist
mtp-newplaylist
mtp-playlists
mtp-reset
mtp-thumb
mtp-tracks
mtp-trexist
multiarb
multictx
multinoise
multitex
munch	The munch program performs the munching squares hack. It picks square size, position, and gravity randomly. It also displays a creatively broken misimplementation of the classic algorithm.
mutter	MUTTER - Clutter based compositing GTK2 Window Manager
mvxattr	mvxattr - Recursively rename extended attributes
mwaw2csv
mwaw2html
mwaw2raw
mwaw2svg
mwaw2text
mwawFile
mwawZip
my_print_defaults	my_print_defaults displays the options that are present in option groups of option files. The output indicates what options will be used by programs that read the specified option groups. For example, the mysqlcheck program reads the [mysqlcheck] and [client] option groups.
myisam_ftdump	myisam_ftdump displays information about FULLTEXT indexes in MyISAM tables. It reads the MyISAM index file directly, so it must be run on the server host where the table is located. Before using myisam_ftdump, be sure to issue a FLUSH TABLES statement first if the server is running.
myisamchk	The myisamchk utility gets information about your database tables or checks, repairs, or optimizes them. myisamchk works with MyISAM tables (tables that have .MYD and .MYI files for storing data and indexes).
myisamlog	myisamlog processes the contents of a MyISAM log file. To create such a file, start the server with a --log-isam=log_file option.
myisampack	The myisampack utility compresses MyISAM tables. myisampack works by compressing each column in the table separately. Usually, myisampack packs the data file 40% to 70%.
mysql	mysql is a simple SQL shell with input line editing capabilities. It supports interactive and noninteractive use. When used interactively, query results are presented in an ASCII-table format. When used noninteractively (for example, as a filter), the result is presented in tab-separated format. The output format can be changed using command options.
mysql_config	mysql_config provides you with useful information for compiling your MySQL client and connecting it to MySQL. It is a shell script, so it is available only on Unix and Unix-like systems.
mysql_config_editor	The mysql_config_editor utility enables you to store authentication credentials in an encrypted login path file named .mylogin.cnf. The file location is the %APPDATA%\MySQL directory on Windows and the current user's home directory on non-Windows systems. The file can be read later by MySQL client programs to obtain authentication credentials for connecting to MySQL Server.
mysql_install_db	mysql_install_db - initialize MySQL data directory
mysql_plugin	mysql_plugin - configure MySQL server plugins
mysql_secure_installation	mysql_secure_installation - improve MySQL installation security
mysql_ssl_rsa_setup
mysql_tzinfo_to_sql	The mysql_tzinfo_to_sql program loads the time zone tables in the mysql database. It is used on systems that have a zoneinfo database (the set of files describing time zones). Examples of such systems are Linux, FreeBSD, Solaris, and OS X. One likely location for these files is the /usr/share/zoneinfo directory (/usr/share/lib/zoneinfo on Solaris). If your system does not have a zoneinfo database, you can use the downloadable package described in Section 11.6, "MySQL Server Time Zone Support".
mysql_upgrade	mysql_upgrade examines all tables in all databases for incompatibilities with the current version of MySQL Server. mysql_upgrade also upgrades the system tables so that you can take advantage of new privileges or capabilities that might have been added.
mysqladmin	mysqladmin - client for administering a MySQL server
mysqlbinlog	mysqlbinlog - utility for processing binary log files
mysqlcheck	mysqlcheck - a table maintenance program
mysqld_multi	mysqld_multi is designed to manage several mysqld processes that listen for connections on different Unix socket files and TCP/IP ports. It can start or stop servers, or report their current status.
mysqld_safe	mysqld_safe - MySQL server startup script
mysqldump	mysqldump - a database backup program
mysqldumpslow	mysqldumpslow - Summarize slow query log files
mysqlimport	mysqlimport - a data import program
mysqlpump
mysqlshow	The mysqlshow client can be used to quickly see which databases exist, their tables, or a table's columns or indexes.
mysqlslap	mysqlslap is a diagnostic program designed to emulate client load for a MySQL server and to report the timing of each stage. It works as if multiple clients are accessing the server.
mysqltest	mysqltest - program to run test cases
mysqlxtest
Back to Top

Content N[edit]

Utility	Description

nano	nano is a small, free and friendly editor which aims to replace Pico, the default editor included in the non-free Pine package. On top of copying Pico's look and feel, nano also implements some missing (or disabled by default) features in Pico, such as "search and replace" and "go to line and column number".
natpmpc
nautilus	nautilus - the GNOME File Manager
nautilus-autorun-software
ndrdump	ndrdump tries to parse the specified filename using Samba's parser for the specified pipe and function. The third argument should be either in or out, depending on whether the data should be parsed as a request or a reply.
nemo	nemo - the Cinnamon File Manager
nemo-autorun-software
nemo-connect-server	nemo-connect-server - To Access a remote server
nemo-open-with
nemo-preview
neofetch
neon-config	neon-config - script providing information about installed copy of neon library
neqn	The neqn program is actually just a shell script which invokes the eqn(1) command with the ascii output device.
net	net - Tool for administration of Samba and remote CIFS servers.
net-snmp-cert
net-snmp-config	net-snmp-config - returns information about installed net-snmp libraries and binaries
net-snmp-create-v3-user	The net-snmp-create-v3-user shell script is designed to create a new user in net-snmp configuration file (/var/net-snmp/snmpd.conf by default).
netcardmgr
nettle-hash
nettle-lfib-stream
nettle-pbkdf2
networkmgr
ngettext	The ngettext program translates a natural language message into the user's language, by looking up the translation in a message catalog, and chooses the appropriate plural form, which depends on the number COUNT and the language of the message catalog where the translation was found.
nm	nm -- display symbolic information in object files; The nm utility displays symbolic information in the object files, executables, and object library files named by its arguments. Lack of symbolic information in an otherwise valid input file, is not considered to be an error. If no files are specified on the command line, nm will attempt to read a.out.
nmblookup	nmblookup - NetBIOS over TCP/IP client used to lookup NetBIOS names; nmblookup is used to query NetBIOS names and map them to IP addresses in a network using NetBIOS over TCP/IP queries. The options allow the name queries to be directed at a particular IP broadcast area or to a particular machine. All queries are done over UDP.
noise
noise2
nop	nop reads a stream of graphs and prints each in pretty-printed (canonical) format on stdout. If no files are given, it reads from stdin.
notify-send
npth-config
nroff	The nroff script emulates the nroff command using groff. Only ascii, latin1, koi8-r, utf8, and cp1047 are valid arguments for the -T option, selecting the output encoding emitted by grotty, groff's TTY output device. If an invalid or no -T option is given, nroff checks the current locale to select a default output device.
nspr-config
nss-config
ntfs-3g	ntfs-3g is an NTFS driver, which can create, remove, rename, move files, directories, hard links, and streams; it can read and write files, including streams, sparse files and transparently compressed files; it can handle special files like symbolic links, devices, and FIFOs; moreover it provides standard management of file ownership and permissions, including POSIX ACLs.
ntfs-3g.probe	The ntfs-3g.probe utility tests a volume if it's NTFS mountable readonly or read-write, and exits with a status value accordingly. The volume can be a block device or image file.
ntfscat	ntfscat - print NTFS files and streams on the standard output
ntfscluster	ntfscluster - identify files in a specified region of an NTFS volume.
ntfscmp	ntfscmp - compare two NTFS filesystems and tell the differences
ntfsfix	ntfsfix - fix common errors and force Windows to check NTFS
ntfsinfo	ntfsinfo - dump a file's attributes
ntfsls	ntfsls - list directory contents on an NTFS filesystem
ntlm_auth	ntlm_auth - tool to allow external access to Winbind's NTLM authentication function
numbers2csv
numbers2raw
numbers2text
nunit-console
nunit-console2
nunit-console4
nvidia-bug-report.sh
Back to Top

Content O[edit]

Utility	Description

objcopy	objcopy -- copy and translate object files
objdump	objdump - display information from object files.
ocs
ocspclnt
ocsptool	ocsptool - GnuTLS OCSP tool; Ocsptool is a program that can parse and print information about OCSP requests/responses, generate requests and verify responses.
oeminst
offset
oidcalc
okular	okular - a universal document viewer
okularkirigami
oLschema2ldif	oLschema2ldif is a simple tool that converts standard OpenLDAP schema files to a LDIF format that is understood by LDB.
openal-info
openRTSP
opj_compress
opj_decompress
opj_dump
opt80
orbit2-config
orbit-idl-2
orc-bugreport
orcc
orcus-css-dump
orcus-detect
orcus-json
orcus-mso-encryption
orcus-xml-dump
orcus-yaml
orcus-zip-dump
osage	osage - filter for drawing clustered graphs
out123	out123 - send raw PCM audio or a waveform pattern to an output device
overlay	overlay, overwrite, copywin - overlay and manipulate overlapped curses windows
Back to Top

Content P[edit]

Utility	Description

p7content	p7content -- A command to display pkcs7 content.
p7env	p7env -- A command to create a pkcs7 enveloped data.
p7sign	p7sign -- A command to create a detached pkcs7 signature (over a given input file).
p7verify	p7verify -- A command to do a verification of a detached pkcs7 signature.
p11-kit	p11-kit - - Provides a way to load and enumerate PKCS#11 modules. Provides a standard configuration setup for installing PKCS#11 modules in such a way that they're discoverable.
p11tool	p11tool - GnuTLS PKCS #11 tool Program that allows operations on PKCS #11 smart cards and security modules.
pa-info
pacat	pacat - Play back or record raw or encoded audio streams on a PulseAudio sound server
pacmd	pacmd - Reconfigure a PulseAudio sound server during runtime
pactl	pactl - Control a running PulseAudio sound server
padsp	padsp starts the specified program and redirects its access to OSS compatible audio devices (/dev/dsp and auxiliary devices) to a PulseAudio sound server.
pages2html
pages2raw
pages2text
pal2rgb	pal2rgb - convert a palette color TIFF image to a full color image
paltex
pam_helper
pango-list
pango-view	pango-view - Pango text viewer
paperconf	paperconf - print paper configuration information
parsetrigrams
pasuspender	pasuspender is a tool that can be used to tell a local PulseAudio sound server to temporarily suspend access to the audio devices, to allow other applications access them directly. pasuspender will suspend access to the audio devices, fork a child process, and when the child process terminates, resume access again.
pavucontrol	pavucontrol GTK mixer for PulseAudio
pax11publish	pax11publish - PulseAudio X11 Credential Utility
pbdemo
pbinfo
pbmtojbg	pbmtojbg - portable bitmap to JBIG1 file converter
pbmtojbg85
pcre2-config	pcre2-config - program to return PCRE2 configuration
pcre2grep	pcre2grep - a grep with Perl-compatible regular expressions.
pcre2test	pcre2test - a program for testing Perl-compatible regular expressions.
pcre-config	pcre-config returns the configuration of the installed PCRE libraries and the options required to compile a program to use them. Some of the options apply only to the 8-bit, or 16-bit, or 32-bit libraries, respectively, and are not available if only one of those libraries has been built. If an unavailable option is encountered, the "usage" information is output.
pcregrep	pcregrep - a grep with Perl-compatible regular expressions.
pcretest	pcretest - a program for testing Perl-compatible regular expressions.
pdb2mdb	pdb2mdb - Program Database to Mono Debugging Symbol converter.
pdbedit	pdbedit - manage the SAM database (Database of Samba Users)
pdf2dsc	pdf2dsc - generate a PostScript page list of a PDF document
pdf2ps	pdf2ps - Ghostscript PDF to PostScript translator
pdfattach
pdfdetach	pdfdetach - Portable Document Format (PDF) document embedded file extractor (version 3.03)
pdffonts	pdffonts - Portable Document Format (PDF) font analyzer (version 3.03)
pdfimages	pdfimages - Portable Document Format (PDF) image extractor (version 3.03)
pdfinfo	pdfinfo - Portable Document Format (PDF) document information extractor (version 3.03)
pdfmom	pdfmom - Produce PDF documents using the mom macro set
pdfroff	pdfroff - create PDF documents using groff; pdfroff is a wrapper program for the GNU text processing system, groff. It transparently handles the mechanics of multiple pass groff processing, when applied to suitably marked up groff source files, such that tables of contents and body text are formatted separately, and are subsequently combined in the correct order, for final publication as a single PDF document. A further optional "style sheet" capability is provided; this allows for the definition of content which is required to precede the table of contents, in the published document.
pdfseparate	pdfseparate extract single pages from a Portable Document Format (PDF).
pdfsig	pdfsig - Portable Document Format (PDF) digital signatures tool
pdftocairo	pdftocairo - Portable Document Format (PDF) to PNG/JPEG/TIFF/PDF/PS/EPS/SVG using cairo
pdftohtml	pdftohtml - program to convert PDF files into HTML, XML and PNG images
pdftoppm	pdftoppm - Portable Document Format (PDF) to Portable Pixmap (PPM) con- verter (version 3.03)
pdftops	pdftops - Portable Document Format (PDF) to PostScript converter (version 3.03)
pdftotext	pdftotext - Portable Document Format (PDF) to text converter (version 3.03)
pdfunite	pdfunite - Portable Document Format (PDF) page merger
peas-demo
pedump
peglgears
perl	perl - The Perl 5 language interpreter
perlbug	perlbug - how to submit bug reports on Perl
perldoc	perldoc - Look up Perl documentation in Pod format.
perlivp	perlivp - Perl Installation Verification Procedure
perlthanks	This program is designed to help you generate and send bug reports (and thank-you notes) about perl5 and the modules which ship with it.
permview	permview - Viewer for declarative security permission sets inside assemblies.
perror	perror -- print an error number as a string
peverify
pf2afm	pf2afm - Make an AFM file from Postscript (PFB/PFA/PFM) font files using ghostscript
pfbtopfa	The pfbtopfa utility converts PostScript Type 1 font files from the binary PFB format to the ASCII PFA format. It also converts any kind of line ending to the UNIX style \n.
pfbtops	pfbtops - translate a PostScript font in .pfb format to ASCII
pgon-mode
phononsettings
pi-make-microsoft-freecell-board	make-gnome-freecell-board, make-aisleriot-freecell-board, pi-make-microsoft-freecell-board, make_pysol_freecell_board.py - Programs to generate boards to be used as input to Freecell Solver.
pic	pic - compile pictures for troff or TeX
pic2graph	pic2graph - convert a PIC diagram into a cropped image
piconv	piconv is perl version of iconv, a character encoding converter widely available for various Unixen today. This script was primarily a technology demonstrator for Perl 5.8.0, but you can use piconv in the place of iconv for virtually any case.
pidl	pidl - An IDL compiler written in Perl
pinentry-gnome3
pinentry-qt5
pinentry-tty
pixeltest
pk12util
pkaction
pkcheck
pkcs1-conv
pkexec
pkgdata	pkgdata takes a set of data files and packages them for use by ICU or applications that use ICU. The typical reason to package files using pkgdata is to make their distribution easier and their loading by ICU faster and less consuming of limited system resources such as file descriptors. Packaged data also allow applications to be distributed with fewer resource files, or even with none at all if they link against the packaged data directly
pkttyagent
pl2pm	pl2pm is a tool to aid in the conversion of Perl4-style .pl library files to Perl5-style library modules. Usually, your old .pl file will still work fine and you should only use this tool if you plan to update your library to use some of the newer Perl 5 features, such as AutoLoading.
plank	Plank is meant to be the simplest dock on the planet. The goal is to provide just what a dock needs and absolutely nothing more. It is, however, a library which can be extended to create other dock programs with more advanced features. Thus, Plank is the underlying technology for Docky (starting in version 3.0.0) and aims to provide all the core features while Docky extends it to add fancier things like Docklets, painters, settings dialogs, etc.
plasmapkg2	plasmapkg2 - Install, list, remove Plasma packages
playSIP
plistutil
pluma	Pluma - The MATE Text Editor
pmd2raw
pmd2svg
pmd2text
png-fix-itxt
pngfix
pngtogd
pngtogd2
pod2html	pod2html - convert .pod files to .html files
pod2man	pod2man - Convert POD data to formatted *roff input
pod2text	pod2text - Convert POD data to formatted ASCII text
pod2usage	pod2usage - print usage messages from embedded pod docs in files
podchecker	podchecker - check the syntax of POD format documentation files
podselect	podselect - print selected sections of pod documentation on standard output
point	point SYNOPSIS Public Attributes double x double y double z
point-clip
point-param
point-sprite
point-wide
point-wide-smooth
pointblast
pointcoord
points
polkit-action	polkit-action - List and modify registered PolicyKit actions
polkit-auth	polkit-auth - Manage authorizations
polkit-config-file-validate	polkit-config-file-validate is used to verify that a given PolicyKit configuration file is valid. If no path to a config file is given, the default /etc/PolicyKit/PolicyKit.conf file will be verified.
polkit-gnome-authorization
polkit-gnome-example
polkit-policy-file-validate	polkit-policy-file-validate - Validate a PolicyKit policy file
poly	poly starts the Poly/ML shell. Poly/ML is an implementation of Standard ML written by David Matthews originally at the University of Cambridge and maintained as a project supported by contributors.
poly-flat
poly-flat-clip
poly-flat-unfilled-clip
poly-unfilled
post-grohtml
ppdc	ppdc - cups ppd compiler (deprecated)
ppdhtml	ppdhtml - cups html summary generator (deprecated)
ppdi	ppdi - import ppd files (deprecated)
ppdmerge	ppdmerge merges two or more PPD files into a single, multi-language PPD file. This program is deprecated and will be removed in a future release of CUPS.
ppdpo	ppdpo extracts UI strings from PPDC source files and updates either a GNU gettext or macOS strings format message catalog source file for translation. This program is deprecated and will be removed in a future release of CUPS.
pphs
ppm2tiff	ppm2tiff converts a file in the PPM, PGM and PBM image formats to TIFF.
pre-grohtml
precat
preconv	preconv reads files and converts its encoding(s) to a form GNU troff(1) can process, sending the data to standard output. Currently, this means ASCII characters and `\[uXXXX]' entities, where `XXXX' is a hexadecimal number with four to six digits, representing a Unicode input code. Normally, preconv should be invoked with the -k and -K options of groff.
preparetips5	preparetips5 - extract text from tips file
preunzip
prezip
prezip-bin
printafm	printafm - Print the metrics from a Postscript font in AFM format using ghostscript
printcal
printtarg
profcheck
profile2map	profile2map -- Fuse profiler output converter
profiles	profiles - A utility to report and change SIDs in registry files
projtex
protoc
protocoltojson
prove	prove - Run tests through a TAP harness
proxy
prune	prune reads directed graphs in the same format used by dot(1) and removes subgraphs rooted at nodes specified on the command line via options. These nodes themselves will not be removed, but can be given attributes so that they can be easily located by a graph stream editor such as gvpr(1). prune correctly handles cycles, loops and multiedges.
ps2ascii	ps2ascii - Ghostscript translator from PostScript or PDF to ASCII
ps2epsi	ps2epsi - generate conforming Encapsulated PostScript
ps2pdf	ps2pdf - Convert PostScript to PDF using ghostscript
ps2pdf12	ps2pdf12 - Convert PostScript to PDF 1.2 (Acrobat 3-and-later compatible) using ghostscript
ps2pdf13	ps2pdf13 - Convert PostScript to PDF 1.3 (Acrobat 4-and-later compatible) using ghostscript
ps2pdf14	ps2pdf14 - Convert PostScript to PDF 1.4 (Acrobat 5-and-later compatible) using ghostscript
ps2pdfwr	ps2pdfwr - Convert PostScript to PDF without specifying CompatibilityLevel, using ghostscript
ps2ps	ps2ps, eps2eps - Ghostscript PostScript "distiller"
ps2ps2
psbook	Psbook rearranges pages from a PostScript document into ``signatures for printing books or booklets, creating a new PostScript file. The input PostScript file should follow the Adobe Document Structuring Conventions.
psicc	psicc - little cms PostScript converter.
psktool	psktool - GnuTLS PSK tool, Program that generates random keys for use with TLS-PSK. The keys are stored in hexadecimal format in a key file.
psmerge	psmerge - filter to merge several PostScript files into one
psnup	psnup - multiple pages per sheet; Psnup puts multiple logical pages onto each physical sheet of paper. The input PostScript file should follow the Adobe Document Structuring Conventions.
pspell-config	pspell-config displays information about libpspell installation, mostly for use in build scripts. Note that this script is provided for backward compatibility with programs that use pspell. Do not use as it will eventually go away.
psresize	Psresize rescales and centres a document on a different size of paper. The input PostScript file should follow the Adobe Document Structuring Conventions.
psselect	Psselect selects pages from a PostScript document, creating a new PostScript file. The input PostScript file should follow the Adobe Document Structuring Conventions.
pstops	Pstops rearranges pages from a PostScript document, creating a new PostScript file. The input PostScript file should follow the Adobe Document Structuring Conventions. Pstops can be used to perform a large number of arbitrary re-arrangements of Documents, including arranging for printing 2-up, 4-up, booklets, reversing, selecting front or back sides of documents, scaling, etc.
ptar	ptar - - a tar-like program written in perl
ptardiff	ptardiff - program that diffs an extracted archive against an unextracted one
ptargrep	ptargrep - Apply pattern matching to the contents of files in a tar archive
pub2raw
pub2xhtml
pulseaudio	pulseaudio - The PulseAudio Sound System
pwmake	pwmake - simple tool for generating random relatively easily pronounceable passwords
pwscore	pwscore is a simple tool for checking quality of a password. The password is read from stdin.
pydoc2.7
pydoc3.6
pydoc3.7
pygobject-codegen-2.0
pygtk-codegen-2.0
pygtk-demo
python2.7	python - an interpreted, interactive, object-oriented programming language
python2.7-config
python3.6	python - an interpreted, interactive, object-oriented programming language
python3.6m	python - an interpreted, interactive, object-oriented programming language
python3.6m-config
python3.7	python - an interpreted, interactive, object-oriented programming language
python3.7m	python - an interpreted, interactive, object-oriented programming language
python3.7m-config
pyuic5-3.7
pyvenv-3.6
pyvenv-3.7
Back to Top

Content Q[edit]

Utility	Description

qcatool-qt5	qcatool is a command line tool for performing various cryptographic operations with the Qt Cryptographic Architecture (QCA). qcatool can also be used for testing and debugging QCA.
qpaeq
qpdf	qpdf - PDF transformation software The qpdf program is used to convert one PDF file to another equivalent PDF file. It is capable of performing a variety of transformations such as linearization (also known as web optimization or fast web viewing), encryption, and decryption of PDF files. It also has many options for inspecting or checking PDF files, some of which are useful primarily to PDF developers.
qqwing	qqwing - A tool for generating and solving Sudoku puzzles
qtchooser	qtchooser - a wrapper used to select between Qt development binary versions Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality.
quad
quad-clip
quad-clip-all-vertices
quad-clip-nearplane
quad-degenerate
quad-flat
quad-offset-factor
quad-offset-unfilled
quad-offset-units
quad-tex-2d
quad-tex-3d
quad-tex-alpha
quad-tex-pbo
quad-tex-sub
quad-unfilled
quad-unfilled-clip
quad-unfilled-stipple
quadrapassel	Quadrapassel - Tetris-like game for GNOME Quadrapassel comes from the classic falling-block game, Tetris. The goal of the game is to create complete horizontal lines of blocks, which will disappear.
quads
quadstrip
quadstrip-clip
quadstrip-cont
quadstrip-flat
qvlc
qxp2raw
qxp2svg
qxp2text
Back to Top

Content R[edit]

Utility	Description

ranlib	ar, ranlib -- manage archives
rapper	rapper - Raptor RDF parsing and serializing utility
rarian-example	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-config	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-extract	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-gen-uuid	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-get-cl	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-get-content-list	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-get-extended-content-list	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-get-scripts	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-install	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-migrate	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-preinstall	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-rebuild	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rarian-sk-update	Rarian is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
rasqal-config	rasqal-config - script to get information about the installed version of the RDF query library
raw2hdf	raw2hdf -- Create an .hdf hard disk image from a raw data file
raw2tiff	raw2tiff - create a TIFF file from a raw data
ray
rdfproc	The rdfproc utility allows parsing, querying, manipulating and serializing of RDF content using the Redland RDF library. The store-name is a Redland store name, typically a short identifier. The arguments to command vary and are explained in section COMMANDS below.
rdjpgcom	rdjpgcom - display text comments from a JPEG file
rdoc26
readcd	readcd - read or write data Compact Discs or related madia
readelf	readelf -- display information about ELF objects
readpix
readpixels
recode-sr-latin	recode-sr-latin - convert Serbian text from Cyrillic to Latin script
redland-config	redland-config - script to get information about the installed version of Redland
redland-db-upgrade	redland-db-upgrade - upgrade older Redland databases to 0.9.12 format
refer	refer - preprocess bibliographic references for groff
refine
reflect
regdiff	regdiff - Diff program for Windows registry files
registerRTSPStream
regpatch	The regpatch utility applies registry patches to Windows registry files. The patch files should have the same format as is being used by the regdiff utility and regedit32.exe from Windows. If no patch file is specified on the command line, regpatch attempts to read it from standard input.
regshell	regshell is a utility that lets you browse thru a Windows registry file as if you were using a regular unix shell to browse thru a file system.
regtree	The regtree utility prints out all the contents of a Windows registry file. Subkeys are printed with one level more indentation than their parents.
renormal
replace	The replace utility program changes strings in place in files or on the standard input.
resgen	resgen, resgen2 - Mono/CLI Resource Generator
resgen2	resgen, resgen2 - Mono/CLI Resource Generator
resolve_stack_dump	resolve_stack_dump - resolve numeric stack trace dump to symbols
resolveip	resolveip - resolve host name to IP address or vice versa
revfix
rhythmbox	rhythmbox - music player and library for tagged files using GStreamer; rhythmbox is a very easy to use music playing and management program which supports a wide range of audio formats (including mp3 and ogg). Originally inspired by Apple's iTunes, the current version also supports Internet Radio and Last.fm integration, iPod syncing and generic portable audio player support. Audio CD playback, ripping and encoding, music sharing, and Podcasts.
rhythmbox-client	rhythmbox-client is a tool for controlling an already running instance of rhythmbox. It's useful for remote control scripting, adding specific files to the library from the shell, or printing details of what's playing. It also has an interactive mode, useful for controlling playback remotely via ssh. Any files specified after the option argu ments will be added to the library. If the --enqueue option is given, the files will also be added to the play queue.
ri26
roff2dvi	roff2dvi - transform roff code into dvi mode
roff2html	roff2html - transform roff code into html mode
roff2pdf	roff2pdf - transform roff code into pdf mode
roff2ps	roff2ps - transform roff code into ps mode
roff2text	roff2text - transform roff code into text mode
roff2x	roff2x - transform roff code into x mode
roqet	The roqet utility allows querying of RDF content using the Rasqal RDF query library, printing the results for variable bindings, RDF graph or boolean results in a variety of formats. The query is read from query-URI and the optional base-URI is used as the base URI of the query if present.
rpcclient	rpcclient - tool for executing client side MS-RPC functions
rsaperf
rsvg-convert	rsvg-convert - turn SVG files into raster images.
rsync	rsync - a fast, versatile, remote (and local) file-copying tool
ruby26
run-with-aspell	run-with-aspell - script to help use GNU Aspell as an ispell replacement
rvlc
rzsh
rzxcheck	rzxcheck -- Check the signature in a ZX Spectrum RZX file
rzxdump	rzxdump -- List contents of Sinclair ZX Spectrum input recording files
rzxtool	rzxtool allows some simple modifications to be made to Sinclair ZX Spectrum input recording files: blocks can be removed, snapshot data can be extracted or snapshots can be inserted into the file. The file can also be uncompressed.
Back to Top

Content S[edit]

Utility	Description

samba-ldbadd	samba - Server to provide AD and SMB/CIFS services to clients
samba-ldbdel	samba - Server to provide AD and SMB/CIFS services to clients
samba-ldbdump	samba - Server to provide AD and SMB/CIFS services to clients
samba-ldbedit	samba - Server to provide AD and SMB/CIFS services to clients
samba-ldbmodify
samba-ldbrename
samba-ldbsearch
samba-regedit	samba-regedit - ncurses based tool to manage the Samba registry
samba-tool	samba-tool - Main Samba administration tool.
samplers
samplers_array
sancov80
sane-config	sane-config - get information about the installed version of libsane
sane-find-scanner	sane-find-scanner is a command-line tool to find SCSI and USB scanners and determine their Unix device files. Its primary aim is to make sure that scanners can be detected by SANE backends.
sapWatch
scan-build80
scan-view80
scanadf	scanadf is a command-line interface to control image acquisition devices which are capable of returning a series of images (e.g. a scanner with an automatic document feeder (ADF)). The device is controlled via command-line options. After command-line processing, scanadf normally proceeds to acquire a series of images until the device returns the SANE_STATUS_NO_DOCS status code
scanimage	scanimage is a command-line interface to control image acquisition devices such as flatbed scanners or cameras. The device is controlled via command-line options. After command-line processing, scanimage normally proceeds to acquire an image. The image data is written to standard output in one of the PNM (portable aNyMaP) formats (PBM for black-and-white images, PGM for grayscale images, and PPM for color images), TIFF format (black-and-white, grayscale or color), PNG format, or JPEG format. scanimage accesses image acquisition devices through the SANE (Scanner Access Now Easy) interface and can thus support any device for which there exists a SANE backend (try apropos sane- to get a list of available backends).
scanin
sccmap	sccmap decomposes digraphs into strongly connected components and an auxiliary map of the relationship between components. In this map, each component is collapsed into a node. The resulting graphs are printed to standard out. The number of nodes, edges and strongly connected components are printed to standard error. sccmap is a way of partitioning large graphs into more manageable pieces.
scgcheck	scgcheck - check and validate the ABI of libscg
scl2trd	scl2trd -- Convert .scl disk images to .trd.
scp-dbus-service
sd2raw
sd2svg
sd2text
sdc2csv
sdl2-config
sdl-config
sdw2html
secret-tool	secret-tool is a command line tool that can be used to store and retrieve passwords. Each password is stored in an item. Items are uniquely identified by a set of attribute keys and values. When storing a password you must specify unique pairs of attributes names and values, and when looking up a password you provide the same attribute name and value pairs.
secutil	secutil - Extract X.509 certificates and strongnames from assemblies.
setreg	setreg - Change settings for public key cryptography
setxkbmap	setxkbmap - set the keyboard using the X Keyboard Extension
sexp-conv
sfconvert	sfconvert - convert audio files
sfinfo	sfinfo - display information about audio files
sgen	sgen - Mono XML Serializer GENerator
sgen-grep-binprot
shadow_sampler
shadowtex
shape	The shape command is used to manipulate windows so as to make them have non-rectangular shapes. It also permits the querying of the current status of windows to see what shape they have.
sharedtex
sharedtex_mt
sharesec	sharesec - Set or get share ACLs. This tool is part of the samba(7) suite.
shasum	shasum - Print or Check SHA Checksums
shlibsign
shotwell	shotwell - Digital photo manager
showchar
shtest
signcode	signcode - Digitally sign an PE executable using an X.509 certificate.
signon-ui
signond
signonpluginprocess
signtool
signver
simple-mtpfs	SIMPLE-MTPFS - filesystem driver for MTP based devices
simplex-noise
singlebuffer
sip-3.7
size	size -- display section sizes and total size of ELF objects
skinning
smbcacls	smbcacls - Set or get ACLs on an NT file or directory names This tool is part of the samba(7) suite. The smbcacls program manipulates NT Access Control Lists (ACLs) on SMB file shares. An ACL is comprised zero or more Access Control Entries (ACEs), which define access restrictions for a specific user or group.
smbclient	smbclient - ftp-like client to access SMB/CIFS resources on servers. This tool is part of the samba(7) suite. smbclient is a client that can 'talk' to an SMB/CIFS server. It offers an interface similar to that of the ftp program (see ftp(1)). Operations include things like getting files from the server to the local machine, putting files from the local machine to the server, retrieving directory information from the server and so on.
smbcontrol	smbcontrol - send messages to smbd, nmbd or winbindd processes
smbcquotas	smbcquotas - Set or get QUOTAs of NTFS 5 shares. This tool is part of the samba(7) suite. The smbcquotas program manipulates NT Quotas on SMB file shares.
smbget	smbget - wget-like utility for download files over SMB
smbpasswd	smbpasswd - change a user's SMB password
smbspool	smbspool - send a print file to an SMB printer
smbstatus	smbstatus - report on current Samba connections
smbtar	smbtar - shell script for backing up SMB/CIFS shares irectly to UNIX tape drives
smbtorture	smbtorture - Run a series of tests against a SMB server
smbtree	smbtree - A text based smb network browser. smbtree is a smb browser program in text mode. It is similar to the "Network Neighborhood" found on Windows computers. It prints a tree with all the known domains, the servers in those domains and the shares on the servers.
sn	sn - Digitally sign/verify/compare strongnames on CLR assemblies.
snap2tzx	snap2tzx -- Convert ZX Spectrum snapshot to .tzx tape images
snapconv	snapconv -- Sinclair ZX Spectrum snapshot converter
snapdump
sndfile-cmp	sndfile-cmp -- compare two audio files For two files to compare as being the same, their channel counts, sample rate, audio data lengths and actual audio data must match. Other differences such as string metadata like song title, artist etc and their presence or absence are ignored.
sndfile-concat	sndfile-concat -- concatenate audio data from two or more audio files; sndfile-concat generates a new output file by concatenating the audio data of two or more input files. The encoding of the output file is the encoding used in infile1. Audio data from the subsequent files are converted to this encoding. The only restriction is that the files must have the same number of channels. The output file is overwritten if it already exists.
sndfile-convert	sndfile-convert -- convert sound files from one format to another: wav WAV (Microsoft) aif AIFF (Apple/SGI) au AU (Sun/NeXT) snd AU (Sun/NeXT) raw RAW (header-less) gsm RAW (header-less) vox RAW (header-less) paf PAF (Ensoniq PARIS, big-endian) fap PAF (Ensoniq PARIS, little-endian) svx IFF (Amiga IFF/SVX8/SV16) nist SPHERE (NIST SPeech HEader Resources) sph SPHERE (NIST SPeech HEader Resources) voc VOC (Creative Labs) ircam SF (Berkeley/IRCAM/CARL) sf SF (Berkeley/IRCAM/CARL) w64 W64 (SoundFoundry WAVE 64) mat MAT4 (GNU Octave 2.0 / Matlab 4.2) mat4 MAT4 (GNU Octave 2.0 / Matlab 4.2) mat5 MAT5 (GNU Octave 2.1 / Matlab 5.0) pvf PVF (Portable Voice Format) xi XI (FastTracker 2) htk HTK (HMM Tool Kit) sds SDS (Midi Sample Dump Standard) avr AVR (Audio Visual Research) wavex WAVEX (MS WAVE with WAVEFORMATEX) sd2 SD2 (Sound Designer II) flac FLAC (FLAC Lossless Audio Codec) caf CAF (Apple Core Audio File) wve WVE (Psion Series 3) prc WVE (Psion Series 3) ogg OGG (OGG Container format) oga OGG (OGG Container format) mpc MPC (Akai MPC 2k) rf64 RF64 (RIFF 64)
sndfile-deinterleave	sndfile-interleave, sndfile-deinterleave -- convert mono files into a multi-channel file and vice versa
sndfile-info	sndfile-info -- display information about sound files
sndfile-interleave	sndfile-interleave, sndfile-deinterleave -- convert mono files into a multi-channel file and vice versa
sndfile-metadata-get	sndfile-metadata-get, sndfile-metadata-set -- get or set metadata in a sound file
sndfile-metadata-set	sndfile-metadata-get, sndfile-metadata-set -- get or set metadata in a sound file
sndfile-play	sndfile-play plays one or more sound files on various operating systems using standard audio output APIs.
sndfile-resample
sndfile-salvage	sndfile-salvage -- salvage audio data from WAV files longer than 4G Audio files using the WAV file container are inherently limited to 4G of data size fields in the WAV header being stored as unsigned 32bit integers. Many applications have trouble with these WAV files that are more the 4G in size. sndfile-salvage rewrites the WAV file into a W64 file with the same audio content. This file is overwritten if it already exists.
sndiod	The sndiod daemon is an intermediate layer between audio or MIDI programs and the hardware. It performs the necessary audio processing to allow any program to work on any supported hardware. By default, sndiod accepts connections from programs running on the same system only; it initializes only when programs are using its services, allowing sndiod to consume a negligible amount of system resources the rest of the time. Systems with no audio hardware can use sndiod to keep hot-pluggable devices usable by default at virtually no cost.
snmp-bridge-mib	snmp-bridge-mib - provide Linux bridge information via SNMP
snmpbulkget	snmpbulkget - communicates with a network entity using SNMP GETBULK requests.
snmpbulkwalk	snmpbulkwalk - retrieve a subtree of management values using SNMP GETBULK requests
snmpcheck
snmpconf	snmpconf - creates and modifies SNMP configuration files snmpconf is a simple Perl script that walks you through setting up a configuration file step by step. It should be fairly straight forward to use. Merely run it and answer its questions.
snmpdelta	snmpdelta - Monitor delta differences in SNMP Counter values
snmpdf	snmpdf is simply a networked version of the typical df command. It checks the disk space on the remote machine by examining the HOST-RE- SOURCES-MIB's hrStorageTable or the UCD-SNMP-MIB's dskTable. By default, the hrStorageTable is preferred as it typically contains more information. However, the -Cu argument can be passed to snmpdf to force the usage of the dskTable.
snmpget	snmpget is an SNMP application that uses the SNMP GET request to query for information on a network entity. One or more object identifiers (OIDs) may be given as arguments on the command line. Each variable name is given in the format specified in variables(5).
snmpgetnext	snmpgetnext is an SNMP application that uses the SNMP GETNEXT request to query for information on a network entity. One or more object identifiers (OIDs) may be given as arguments on the command line. Each variable name is given in the format specified in variables(5). For each one, the variable that is lexicographically "next" in the remote entity's MIB will be returned.
snmpnetstat	snmpnetstat - display networking status and configuration information from a network entity via SNMP
snmpset	snmpset is an SNMP application that uses the SNMP SET request to set information on a network entity. One or more object identifiers (OIDs) must be given as arguments on the command line. A type and a value to be set must accompany each object identifier. Each variable name is given in the format specified in variables(5).
snmpstatus	snmpstatus - retrieves a fixed set of management information from a network entity
snmptable	snmptable - retrieve an SNMP table and display it in tabular form
snmptest	snmptest - communicates with a network entity using SNMP requests
snmptranslate	snmptranslate - translate MIB OID names between numeric and textual forms
snmptrap	snmptrap, snmpinform - sends an SNMP notification to a manager
snmpusm	snmpusm - creates and maintains SNMPv3 users on a network entity
snmpvacm	snmpvacm - creates and maintains SNMPv3 View-based Access Control entries on a network entity
snmpwalk	snmpwalk - retrieve a subtree of management values using SNMP GETNEXT requests
soapsuds	soapsuds - Mono's Remoting Proxy Generator; soapsuds is a tool for generating WSDL documents and client proxies for remoting services. A WSDL document describes the methods that a service provides together with XML schemas of all referenced data structures. A client proxy is a class which offers the same methods as the service it represents, but provides no implementation, it just forwards calls to the remote service.
soelim	soelim -- interpret .so requests in manpages
software-station	Graphical interface to get software/packages from the GhostBSD repository
sol	sol, solscores - Solitaire card game
solid-hardware5
spd-say
spdsend
spec2cie
specplot
spectex
speech-dispatcher
speexdec	speexdec - The reference implementation speex decoder. Decodes a Speex file and produce a WAV file or raw file
speexenc	speexenc - The reference implementation speex encoder.
spellout
splain	diagnostics, splain - produce verbose warning diagnostics; This module extends the terse diagnostics normally emitted by both the perl compiler and the perl interpreter (from running perl with a -w switch or "use warnings"), augmenting them with the more explicative and endearing descriptions found in perldiag. Like the other pragmata, it affects the compilation phase of your program rather than merely the execution phase.
splitti3
spotread
spriteblast
sqlite3	sqlite3 - A command line interface for SQLite version 3
sqlmetal
sqlobject-admin
sqlobject-convertOldURI
sqlsharp	sqlsharp is a Mono SQL tool used for entering SQL queries to a database using Mono data providers.
srptool	srptool - GnuTLS SRP tool; Simple program that emulates the programs in the Stanford SRP (Secure Remote Password) libraries using GnuTLS. It is intended for use in places where you don't expect SRP authentication to be the used for system users.
ssltap
start-pulseaudio-x11	start-pulseaudio-x11 - PulseAudio Sound Server X11 Startup Script; This script starts pulseaudio (if not already running) and loads modules to publish access credentials to the PulseAudio server in the X11 root window and to synthesize X11 media key events on cork/uncork requests. Additionally it registers PulseAudio to the X11 Session Manager.
startx	startx - initialize an X session; The startx script is a front end to xinit(1) that provides a somewhat nicer user interface for running a single session of the X Window System. It is often run with no arguments.
station-tweak
stex3d
strings	strings -- print the strings of printable characters in files; For each file specified, the strings utility prints contiguous sequences of printable characters that are at least n characters long and are followed by an unprintable character. The default value of n is 4. By default, the strings utility only scans the initialized and loaded sections of ELF objects; for other file types, the entire file is scanned. The strings utility is mainly used for determining the contents of non-text files.
strip	strip -- discard information from ELF objects; The strip utility is used to discard information from the ELF objects specified by the arguments file .... If an explicit output file name is not specified using the -o option, the strip utility will modify its input arguments in-place.
strsclnt
sub-tex
substrings.pl
sudo	sudo, sudoedit -- execute a command as another user sudo allows a permitted user to execute a command as the superuser or another user, as specified by the security policy. The invoking user's real (not effective) user ID is used to determine the user name with which to query the security policy.
sudoreplay	sudoreplay -- replay sudo session logs sudoreplay plays back or lists the output logs created by sudo. When replaying, sudoreplay can play the session back in real-time, or the playback speed may be adjusted (faster or slower) based on the command line options.
svcutil
svn	svn - Subversion command line client tool; Subversion is a version control system, which allows you to keep old versions of files and directories (usually source code), keep a log of who, when, and why changes occurred, etc., like CVS, RCS or SCCS. Suversion keeps a single copy of the master sources. This copy is called the source ``repository; it contains all the information to permit extracting previous versions of those files at any time.
svn-mergeinfo-normalizer
svn-populate-node-origins-index
svnadmin	svnadmin - Subversion repository administration tool Subversion is a version control system, which allows you to keep old versions of files and directories (usually source code), keep a log of who, when, and why changes occurred, etc., like CVS, RCS or SCCS. Subversion keeps a single copy of the master sources. This copy is called the source ``repository; it contains all the information to permit extracting previous versions of those files at any time.
svnauthz
svnauthz-validate
svnbench
svnconflict
svndiff
svndiff3
svndiff4
svndumpfilter	svndumpfilter - Filter a subversion repository 'dumpfile'. Subversion is a version control system, which allows you to keep old versions of files and directories (usually source code), keep a log of who, when, and why changes occurred, etc., like CVS, RCS or SCCS. Subversion keeps a single copy of the master sources. This copy is called the source ``repository; it contains all the information to permit extracting previous versions of those files at any time.
svnfsfs
svnlook	svnlook - Subversion repository examination tool Subversion is a version control system, which allows you to keep old versions of files and directories (usually source code), keep a log of who, when, and why changes occurred, etc., like CVS, RCS or SCCS. Subversion keeps a single copy of the master sources. This copy is called the source ``repository; it contains all the information to permit extracting previous versions of those files at any time.
svnmover
svnmucc	svnmucc - Multiple URL Command Client for Subversion Subversion is a version control system, which allows you to keep old versions of files and directories (usually source code), keep a log of who, when, and why changes occurred, etc., like CVS, RCS or SCCS. Subversion keeps a single copy of the master sources. This copy is called the source ``repository; it contains all the information to permit extracting previous versions of those files at any time.
svnraisetreeconflict
svnrdump	svnrdump - Subversion remote repository dumper and loader
svnserve	svnserve - Server for the 'svn' repository access method; svnserve allows access to Subversion repositories using the svn network protocol. It can both run as a standalone server process, or it can run out of inetd. You must choose a mode of operation when you start svnserve.
svnsync	svnsync - Subversion repository synchronization tool
svnversion	svnversion - Produce a compact version identifier for a working copy.
swapbuffers
swell-foop
sxpm	sxpm - Show an XPM (X PixMap) file and/or convert XPM 1 or 2 files to XPM 3. The sxpm program can be used to view any XPM (version 1, 2, or 3) file and/or to convert a file from XPM1 or XPM2 to XPM version 3. If sxpm is run with any dummy option specified, the usage is displayed. If no geometry is specified, the show window will have the size of the read pixmap. Pressing the key Q in the window will quit the program.
symcryptrun	symcryptrun - Call a simple symmetric encryption tool; Sometimes simple encryption tools are already in use for a long time and there might be a desire to integrate them into the GnuPG framework. The protocols and encryption methods might be non-standard or not even properly documented, so that a full-fledged encryption tool with an interface like gpg is not doable. symcryptrun provides a solution: It operates by calling the external encryption/decryption module and provides a passphrase for a key using the standard pinentry based mechanism through gpg-agent.
symkeyutil
synclient	synclient - commandline utility to query and modify Synaptics driver options. This program lets you change your Synaptics TouchPad driver for XOrg/XFree86 server parameters while X is running.
syndaemon	syndaemon - a program that monitors keyboard activity and disables the touchpad when the keyboard is being used.
synthcal
synthread
system-config-printer	system-config-printer - configure a CUPS server system-config-printer configures a CUPS server. It uses the CUPS API (bound to Python with pycups) to do this. The communication with the server is performed using IPP. As a result, it is equally able to configure a remote CUPS server as a local one.
system-config-printer-applet	system-config-printer-applet - print job manager; system-config-printer-applet is a print job manager for CUPS. Normally it will display a printer icon in the notification area, greyed out when there are no print jobs for the current user. Clicking on the icon displays a simple print job manager for cancelling or reprinting jobs.
Back to Top

Content T[edit]

Utility	Description

taglib-config
tali	Tali - A variation on poker with dice and less money. GNOME Tali is a sort of poker with dice and less money. You roll five dice three times and try to create the best hand. Your two rerolls may include any or all of your dice.
tape2pulses	tape2pulses -- Sinclair ZX Spectrum tape pulse dumper; tape2pulses dumps the pulse information from ZX Spectrum tape images to text files.
tape2wav	tape2wav -- Sinclair ZX Spectrum tape to wav audio file converter
tapeconv	tapeconv -- Sinclair ZX Spectrum tape file converter
targen
tbl	tbl - format tables for troff This manual page describes the GNU version of tbl, which is part of the groff document formatting system. tbl compiles descriptions of tables embedded within troff input files into commands that are understood by troff. Normally, it should be invoked using the -t option of groff. It is highly compatible with Unix tbl. The output generated by GNU tbl cannot be processed with Unix troff; it must be processed with GNU troff. If no files are given on the command line, the standard input will be read. A filename of - will cause the standard input to be read.
tclsh8.5
tclsh8.6
tdbbackup	tdbbackup - tool for backing up and for validating the integrity of samba .tdb files
tdbdump	tdbdump - tool for printing the contents of a TDB file
tdbrestore	tdbrestore - tool for creating a TDB file out of a tdbdump output; This tool is part of the samba(1) suite. tdbrestore is a very simple utility that 'restores' the contents of dump file into TDB (Trivial DataBase) file. The dump file is obtained from the tdbdump command.
tdbtool	tdbtool - manipulate the contents TDB files; This tool is part of the samba(1) suite. tdbtool a tool for displaying and altering the contents of Samba TDB (Trivial DataBase) files. Each of the commands listed below can be entered interactively or provided on the command line.
teapot	teapot -- Table Editor And Planner, Or: Teapot! teapot (Table Editor And Planner, Or Teapot!) is a compact spreadsheet program, featuring three dimensions with linear addressing, relative references, formula references, type safety of computations, iterative expressions and platform independent file format.
telegram-desktop	telegram-desktop Telegram is a cloud-based mobile and desktop messaging app with a focus on security and speed.
terrain	The terrain program produces pseudo-terrain from procedural noise suitable for use with a BRL-CAD dsp primitive. Noise values are computed for the grid points of the lattice and the resultant values are output on the standard output as unsigned shorts in network byte order. The size of the grid is specified with the -w and -n options.
tessdemo
test_chmLib
testAMRAudioStreamer
testDVVideoStreamer
testH264VideoStreamer
testH264VideoToHLSSegments
testH264VideoToTransportStream
testH265VideoStreamer
testH265VideoToTransportStream
testMKVSplitter
testMKVStreamer
testMP3Receiver
testMP3Streamer
testMPEG1or2AudioVideoStreamer
testMPEG1or2ProgramToTransportStream
testMPEG1or2Splitter
testMPEG1or2VideoReceiver
testMPEG1or2VideoStreamer
testMPEG2TransportReceiver
testMPEG2TransportStreamer
testMPEG2TransportStreamSplitter
testMPEG2TransportStreamTrickPlay
testMPEG4VideoStreamer
testOggStreamer
testOnDemandRTSPServer
testparm
testpattern
testRelay
testReplicator
testRTSPClient
testWAVAudioStreamer
tex-quads
texaaline
texcyl
texdemo1
texenv
teximage
texture_from_pixmap
textures
tfmtodit	tfmtodit creates a font file for use with groff -Tdvi. tfm_file is the name of the TeX font metric file for the font. map_file is a file giving the groff names for characters in the font;
th_gen_idx.pl
thunar	Thunar File Manager
thunar-settings
tiff2bw	Tiff2bw converts an RGB or Palette color TIFF image to a greyscale image by combining percentages of the red, green, and blue channels. By default, output samples are created by taking 28% of the red channel, 59% of the green channel, and 11% of the blue channel. To alter these percentages, the -R, -G, and -B options may be used.
tiff2pdf	tiff2pdf opens a TIFF image and writes a PDF document to standard output. The program converts one TIFF file to one PDF file, including multiple page TIFF files, tiled TIFF files, black and white. grayscale, and color TIFF files that contain data of TIFF photometric interpretations of bilevel, grayscale, RGB, YCbCr, CMYK separation, and ICC Lab* as supported by libtiff and PDF.
tiff2ps	tiff2ps - convert a TIFF image to PostScripttm
tiff2rgba	Tiff2rgba converts a wide variety of TIFF images into an RGBA TIFF image. This includes the ability to translate different color spaces and photometric interpretation into RGBA, support for alpha blending, and translation of many different bit depths into a 32bit RGBA image.
tiffcmp	Tiffcmp compares the tags and data in two files created according to the Tagged Image File Format, Revision 6.0. The schemes used for compressing data in each file are immaterial when data are compared-data are compared on a scanline-by-scanline basis after decompression.
tiffcp	tiffcp combines one or more files created according to the Tag Image File Format, Revision 6.0 into a single TIFF file. Because the output file may be compressed using a different algorithm than the input files, tiffcp is most often used to convert between different compression schemes.
tiffcrop	Tiffcrop processes one or more files created according to the Tag Image File Format, Revision 6.0, specification into one or more TIFF file(s). Tiffcrop is most often used to extract portions of an image for processing with bar code recognizer or OCR software when that software cannot restrict the region of interest to a specific portion of the image or to improve efficiency when the regions of interest must be rotated. It can also be used to subdivide all or part of a processed image into smaller sections and export individual images or sections of images as separate files or separate images within one or more files derived from the original input image or images.
tiffdiff
tiffdither	tiffdither - convert a greyscale image to bilevel using dithering
tiffdump	tiffdump - print verbatim information about TIFF files
tiffgamut
tifficc	tifficc - little cms ICC profile applier for TIFF. lcms is a standalone CMM engine, which deals with the color management. It implements a fast transformation between ICC profiles. tifficc is little cms ICC profile applier for TIFF.
tiffinfo	tiffinfo - print information about TIFF files; Tiffinfo displays information about files created according to the Tag Image File Format, Revision 6.0. By default, the contents of each TIFF directory in each file is displayed, with the value of each tag shown symbolically (where sensible).
tiffmedian	tiffmedian applies the median cut algorithm to an RGB image in input.tif to generate a palette image that is written to output.tif. The generated colormap has, by default, 256 entries. The image data is quantized by mapping each pixel to the closest color values in the colormap.
tiffset	Tiffset sets the value of a TIFF header to a specified value or removes an existing setting.
tiffsplit	tiffsplit takes a multi-directory (page) TIFF file and creates one or more single-directory (page) TIFF files from it. The output files are given names created by concatenating a prefix, a lexically ordered suffix in the range [aaa-zzz], the suffix .tif (e.g. xaaa.tif, xaab.tif, ..., xzzz.tif). If a prefix is not specified on the command line, the default prefix of x is used.
tificc	tificc - little cms ICC profile applier for TIFF.
timage
toc2cddb	toc2cddb - translates a TOC file of cdrdao(1) into a cddb file and prints it to stdout
toc2cue	toc2cue - converts a TOC files of cdrdao(1) into a .cue file
toFloat
tomboy	Tomboy is a desktop note-taking application for Linux and Unix. Simple and easy to use, but with potential to help you organize the ideas and information you deal with every day.
touchpad-edge-detector
toyball
tpmd
tpmtool	tpmtool - GnuTLS TPM tool; Program that allows handling cryptographic data from the TPM chip.
tracker
transicc	transicc - little cms ColorSpace conversion calculator.
transmission-gtk	transmission-gtk is a fast and easy BitTorrent client. BitTorrent is a peer-to-peer file transfer protocol which uses a metainfo file (usually with the .torrent file extension) and a central tracker to distribute file data amongst a group of peers. For more information on the BitTorrent protocol see BitTorrent
transpose-freecell-board.py	transpose-freecell-board.py - transpose a Freecell/etc. layout from play-stacks in text-columns to play-stacks in text lines.
traptoemail	traptoemail - snmptrapd handler script to convert snmp traps into emails
tred	tred computes the transitive reduction of directed graphs, and prints the resulting graphs to standard output. This removes edges implied by transitivity. Nodes and subgraphs are not otherwise affected. The ``meaning and validity of the reduced graphs is application dependent. tred is particularly useful as a preprocessor to dot to reduce clutter in dense layouts.
tri
tri-2101010
tri-2101010-dlist
tri-alpha
tri-alpha-tex
tri-array-interleaved
tri-blend
tri-blend-color
tri-blend-max
tri-blend-min
tri-blend-revsub
tri-blend-sub
tri-clear
tri-clip
tri-cull
tri-cull-both
tri-dlist
tri-edgeflag
tri-edgeflag-array
tri-edgeflag-pv
tri-fbo
tri-fbo-tex
tri-fbo-tex-mip
tri-flat
tri-flat-clip
tri-fog
tri-fp
tri-fp-const-imm
tri-lit
tri-lit-material
tri-logicop-none
tri-logicop-xor
tri-mask-tri
tri-multitex-vbo
tri-orig
tri-point-line-clipped
tri-query
tri-repeat
tri-rotate
tri-scissor-tri
tri-square
tri-stencil
tri-stipple
tri-tex
tri-tex-1d
tri-tex-3d
tri-tex-stipple
tri-tri
tri-unfilled
tri-unfilled-clip
tri-unfilled-edgeflag
tri-unfilled-fog
tri-unfilled-point
tri-unfilled-smooth
tri-unfilled-tri
tri-unfilled-tri-lit
tri-unfilled-userclip
tri-unfilled-userclip-stip
tri-userclip
tri-viewport
tri-z
tri-z-9
tri-z-clip
tri-z-eq
trifan
trifan-flat
trifan-flat-clip
trifan-flat-unfilled-clip
trifan-unfilled
trirast
trispd
tristrip
tristrip-clip
tristrip-flat
troff	troff - the troff processor of the groff text formatting system
trust
ttfread
tunnel
tunnel2
twolame	twolame - an optimised MPEG Audio Layer 2 (MP2) encoder
twoside
txt2ti3
tzxlist	tzxlist -- Sinclair ZX Spectrum "real" tape file lister
Back to Top

Content U[edit]

Utility	Description

uchardet	uchardet - universalchardet (Universal Charset Detector)
uconv	uconv - convert data from one encoding to another uconv converts, or transcodes, each given file (or its standard input if no file is specified) from one encoding to another. The transcoding is done using Unicode as a pivot encoding (i.e. the data are first transcoded from their original encoding to Unicode, and then from Unicode to the destination encoding).
umax_pp
unflatten	unflatten - adjust directed graphs to improve layout aspect ratio
unix-lpr.sh
unmunch
unopkg	unopkg - LibreOffice Extension Manager; LibreOffice is a fully featured office suite for the daily use with all features you would normally expect in an office suite.
unzip	unzip -- extract files from a ZIP archive
unzipsfx	unzipsfx - self-extracting stub for prepending to ZIP archives
update-alternatives	update-alternatives - maintain symbolic links determining default commands
update-desktop-database	update-desktop-database - Build cache database of MIME types handled by desktop files
update-mime-database	update-mime-database - a program to build the Shared MIME-Info database cache
update-qtchooser-wrapper
update-station	GhostBSD graphical package update manager
upnpc
upower	upower - UPower command line tool upower is a simple command line client for the UPower(7) daemon. TODO: not fully documented.
utp_recv
utp_send
utp_test
uuidgen	uuidgen -- generate universally unique identifiers; The uuidgen utility by default generates a single DCE version 1 universally unique identifier (UUID), also known as a globally unique identifier (GUID). The UUID is written to stdout by default.
Back to Top

Content V[edit]

Utility	Description

vala-gen-introspect-0.40
valac-0.40	valac - compiler that translates Vala source code into C source and header files
valadoc-0.40
vao_demo
vapigen-0.40	vapigen - generate a Vala API
vbc
vbo
vbo-drawarrays
vbo-drawarrays-2101010
vbo-drawelements
vbo-drawrange
vbo-noninterleaved
vbo-tri
vboxtool	vboxtool provides effective control of VirtualBox machines
vert-or-frag-only
vert-tex
vertexrate
vfstest	vfstest - tool for testing samba VFS modules
vfychain
vfyserv
viewgam
vim	vim - Vi IMproved, a programmers text editor Vim is a text editor that is upwards compatible to Vi. It can be used to edit all kinds of plain text. It is especially useful for editing programs
vimdot	vimdot - Combined text editor and dot viewer vimdot is a simple script which launches the gvim or vim editor along with a GUI window showing the dot output of the edited file. The dot output window automatically refreshes everytime the file is saved in the editor.
vimtutor	Vimtutor starts the Vim tutor. It copies the tutor file first, so that it can be modified without changing the original file. The Vimtutor is useful for people that want to learn their first Vim commands.
visualinfo
vlc	vlc, qvlc, svlc, nvlc, rvlc, cvlc - the VLC media player
vlc-wrapper	vlc-wrapper - a wrapper to drop privileges with VLC
vmmouse_detect	vmmouse_detect is a tool for detecting if running in a VMware environment where vmmouse is used. It exits with a 0 return value if the vmmouse client is enabled, and 1 if not.
vobStreamer	vobStreamerTM - a network DVD player application
vp-array
vp-array-hf
vp-array-int
vp-clip
vp-line-clip
vp-tri
vp-tri-cb
vp-tri-cb-pos
vp-tri-cb-tex
vp-tri-imm
vp-tri-invariant
vp-tri-swap
vp-tri-tex
vp-unfilled
vpxdec
vpxenc
vsd2raw
vsd2text
vsd2xhtml
vsraytrace
vss2raw
vss2text
vss2xhtml
vte	The vte device driver provides support for RDC R6040 Fast Ethernet controller which is commonly found on Vortex86 System On a Chip (SoC).
vte-2.91
Back to Top

Content W[edit]

Utility	Description

wasm-ld80
watchgnupg	watchgnupg - Read and print logs from a socket; Most of the main utilities are able to write their log files to a Unix Domain socket if configured that way. watchgnupg is a simple listener for such a socket. It ameliorates the output with a time stamp and makes sure that long lines are not interspersed with log output from other utilities. This tool is not available for Windows.
wayland-scanner
wbinfo	wbinfo - Query information from winbind daemon
WebKitWebDriver
webpinfo
webpmux	webpmux - create animated WebP files from non-animated WebP images, extract frames from animated WebP images, and manage XMP/EXIF metadata and ICC profile.
webpng
wincopy
winpos
wish8.5
wish8.6
wks2csv
wks2raw
wks2text
wmctrl	wmctrl - interact with a EWMH/NetWM compatible X Window Manager. wmctrl is a command that can be used to interact with an X Window manager that is compatible with the EWMH/NetWM specification. wmctrl can query the window manager for information, and it can request that certain window management actions be taken.
wmf2eps
wmf2fig
wmf2gd
wmf2svg
wmf2x
woff2_compress
woff2_decompress
woff2_info
word-list-compress	word-list-compress compresses or decompresses sorted word lists for use with the GNU Aspell spell checker.
wordforms
wordlist2hunspell
wpd2html
wpd2raw
wpd2text
wpg2raw
wpg2svg
wpg2svgbatch.pl
wps2html
wps2raw
wps2text
wrjpgcom	wrjpgcom reads the named JPEG/JFIF file, or the standard input if no file is named, and generates a new JPEG/JFIF file on standard output. A comment block is added to the file.
wsdl	wsdl is a tool for generating proxy classes that can be used to access to web services. The tool reads a WSDL document from the provided path or url, and downloads referenced schemas or other WSDL documents if needed.
wsdl2	wsdl is a tool for generating proxy classes that can be used to access to web services. The tool reads a WSDL document from the provided path or url, and downloads referenced schemas or other WSDL documents if needed.
Back to Top

Content X[edit]

Utility	Description

x86_64-portbld-freebsd12.1-c++9
x86_64-portbld-freebsd12.1-g++9
x86_64-portbld-freebsd12.1-gcc9
x86_64-portbld-freebsd12.1-gcc-9.3.0
x86_64-portbld-freebsd12.1-gcc-ar9
x86_64-portbld-freebsd12.1-gcc-nm9
x86_64-portbld-freebsd12.1-gcc-ranlib9
x86_64-portbld-freebsd12.1-gfortran9
x265
x509-parser
xauth	The xauth program is used to edit and display the authorization information used in connecting to the X server. This program is usually used to extract authorization records from one machine and merge them in on another (as is the case when using remote logins or granting access to other users). Commands (described below) may be entered interactively, on the xauth command line, or in scripts. Note that this program does not contact the X server except when the generate command is used. Normally xauth is not used to create the authority file entry in the first place; the program that starts the X server (often xdm or startx) does that.
xbuild	xbuild can be used to build MSBuild project files. Integrated Development Environments like MonoDevelop and "Microsoft Visual Studio .NET" use msbuild project file format.
xcam	xcam - a graphical camera frontend for SANE xcam provides a graphical user-interface to control an image acquisition device such as a flatbed scanner or a camera. It allows scanning invidual images and can be invoked directly from the command-line. xcam acts as a stand-alone program that saves acquired images in a suitable PNM format (PBM for black-and-white images, PGM for grayscale images, and PPM for color images).
xconfig
xdg-desktop-icon	xdg-desktop-icon - command line tool for (un)installing icons to the desktop The xdg-desktop-icon program can be used to install an application launcher or other file on the desktop of the current user. An application launcher is represented by a .desktop file. Desktop files are defined by the freedesktop.org Desktop Entry Specification. The most important aspects of .desktop files are summarized below.
xdg-desktop-menu	xdg-desktop-menu - command line tool for (un)installing desktop menu items hpmepage
xdg-email	xdg-email - command line tool for sending mail using the user's preferred e-mail composer
xdg-icon-resource	xdg-icon-resource - command line tool for (un)installing icon resources
xdg-mime	xdg-mime - command line tool for querying information about file type handling and adding descriptions for new file types
xdg-open	xdg-open - opens a file or URL in the user's preferred application
xdg-screensaver	xdg-screensaver - command line tool for controlling the screensaver
xdg-settings	xdg-settings - get various settings from the desktop environment
xdg-user-dir	xdg-user-dir looks up the current path for one of the special XDG user dirs.
xdg-user-dirs-update	xdg-user-dirs-update updates the current state of the users user-dirs.dir.
xdpyinfo	Xdpyinfo is a utility for displaying information about an X server. It is used to examine the capabilities of a server, the predefined values for various parameters used in communicating between clients and the server, and the different types of screens and visuals that are available.
xeglgears
xeglthreads
xfce4-about
xfce4-panel
xfce4-popup-applicationsmenu
xfce4-popup-directorymenu
xfce4-popup-windowmenu
xfconf-query
xfont
xft-config
xgettext	xgettext - extract gettext strings from source
xicclu
xinit	xinit - X Window System initializer The xinit program is used to start the X Window System server and a first client program on systems that are not using a display manager such as xdm(1) or in environments that use multiple window systems. When this first client exits, xinit will kill the X server and then terminate.
xkbcomp	The xkbcomp keymap compiler converts a description of an XKB keymap into one of several output formats. The most common use for xkbcomp is to create a compiled keymap file (.xkm extension) which can be read directly by XKB-capable X servers or utilities. The keymap compiler can also produce C header files or XKB source files. The C header files produced by xkbcomp can be included by X servers or utilities that need a built-in default keymap. The XKB source files produced by xkbcomp are fully resolved and can be used to verify that the files which typically make up an XKB keymap are merged correctly or to create a single file which contains a complete description of the keymap.
xkeystone
xml2-config	xml-config - script to get information about the installed version of GNOME-XML
xml2po	xml2po - program to create a PO-template file from a DocBook XML file and merge it back into a (translated) XML file
xmlcatalog	xmlcatalog - Command line tool to parse and manipulate XML or SGML catalog files.
xmlcatmgr	xmlcatmgr is a utility used to manipulate SGML and XML catalogs. It is designed with simplicity in mind: it does not depend on external programs nor libraries. This manpage corresponds to xmlcatmgr version 2.2.
xmllint	The xmllint program parses one or more XML files, specified on the command line as XML-FILE (or the standard input if the filename provided is - ). It prints various types of output, depending upon the options selected. It is useful for detecting errors both in XML code and in the XML parser itself.
xmlsec1	xmlsec is a command line tool for signing, verifying, encrypting and decrypting XML documents.
xmlsec1-config	xmlsec1-config - detail installed version of xmlsec library
xmlwf	xmlwf - Determines if an XML document is well-formed
xmodmap	The xmodmap program is used to edit and display the keyboard modifier map and keymap table that are used by client applications to convert event keycodes into keysyms. It is usually run from the user's session startup script to configure the keyboard according to personal tastes.
Xorg	Xorg is a full featured X server that was originally designed for UNIX and UNIX-like operating systems running on Intel x86 hardware. It now runs on a wider range of hardware and OS platforms.
Xorg.wrap
xprop	The xprop utility is for displaying window and font properties in an X server. One window or font is selected using the command line arguments or possibly in the case of a window, by clicking on the desired window. A list of properties is then given, possibly with formatting information.
xpstojpeg
xpstopdf
xpstopng
xpstops
xpstosvg
xrandr	xrandr - primitive command line interface to RandR extension Xrandr is used to set the size, orientation and/or reflection of the outputs for a screen. It can also set the screen size. If invoked without any option, it will dump the state of the outputs, showing the existing modes for each of them, with a '+' after the preferred modes and a '*' after the current mode. There are a few global options. Other options modify the last output that is specified in earlier parameters in the command line. Multiple outputs may be modified at the same time by passing multiple --output options followed immediately by their corresponding modifying options.
xrdb	Xrdb is used to get or set the contents of the RESOURCE_MANAGER property on the root window of screen 0, or the SCREEN_RESOURCES property on the root window of any or all screens, or everything combined. You would normally run this program from your X startup file.
xrotfontdemo
xsane	xsane provides a graphical user-interface to control an image acquisition device such as a flatbed scanner. It allows previewing and scanning individual images and can be invoked either directly from the command-line or through The GIMP image manipulation program. In the former case, xsane acts as a stand-alone program that saves acquired images in a suitable PNM format (PBM for black-and-white images, PGM for grayscale images, and PPM for color images) or converts the image to JPEG, PNG, PS or TIFF. In the latter case, the images are directly passed to The GIMP for further processing.
xscanimage	xscanimage provides a graphical userinterface to control an image acquisition device such as a flatbed scanner or a camera. It allows previewing and scanning invidual images and can be invoked either directly from the command-line or through The GIMP image manipulation program. In the former case, xscanimage acts as a stand-alone program that saves acquired images in a suitable PNM format (PBM for black-and-white images, PGM for grayscale images, and PPM for color images). In the latter case, the images are directly passed to The GIMP for further processing.
xsd	xsd is a tool for intended to complement the XML serialization support of Mono. It can do the following tasks:
xset	xset - user preference utility for X This program is used to set various user preference options of the display.
xslt-config
xsltproc	xsltproc is a command line tool for applying XSLT stylesheets to XML documents. It is part of libxslt(3), the XSLT C library for GNOME. While it was developed as part of the GNOME project, it can operate independently of the GNOME desktop.
xsubpp	xsubpp - compiler to convert Perl XS code into C code This compiler is typically run by the makefiles created by ExtUtils::MakeMaker or by Module::Build or other Perl module build tools. xsubpp will compile XS code into C code by embedding the constructs necessary to let C functions manipulate Perl values and creates the glue necessary to let Perl access those functions. The compiler uses typemaps to determine how to map C function parameters and variables to Perl values.
xxd	xxd - make a hexdump or do the reverse.
xxhsum
Back to Top

Content Y[edit]

Utility	Description

yat2m
yelp	yelp Help browser for the GNOME 3 desktop
Back to Top

Content Z[edit]

Utility	Description

zeitgeist-daemon	zeitgeist-daemon is daemon providing an activity log. That is, it consists of a central database for events such as file usage, browser history, calendar entries, etc.
zeitgeist-datahub	zeitgeist-datahub - passive loggers for Zeitgeist
zenity	zenity is a program that will display GTK+ dialogs, and return (either in the return code, or on standard output) the users input. This allows you to present information, and ask for information from the user, from all manner of shell scripts.
zim	zim - A Desktop Wiki Editor
zip	zip - package and compress (archive) files
zipcloak	zipcloak - encrypt entries in a zipfile
zipcmp	zipcmp compares the zip archives or directories archive1 and archive2 and checks if they contain the same files, comparing their names, uncompressed sizes, and CRCs. File order and compressed size differences are ignored.
zipdetails	Zipdetails displays information about the internal record structure of the zip file. It is not concerned with displaying any details of the compressed data stored in the zip file.
zipgrep	zipgrep - search files in a ZIP archive for lines matching a pattern
zipinfo	zipinfo - list detailed information about a ZIP archive
zipmerge	zipmerge merges the source zip archives source-zip into the target zip archive target-zip. By default, files in the source zip archives over write existing files of the same name in the target zip archive.
zipnote	zipnote - write the comments in zipfile to stdout, edit comments and rename files in zipfile
zipsplit	zipsplit - split a zipfile into smaller zipfiles
ziptool	ziptool modifies the zip archive zip-archive according to the commands given.
zlib_decompress	zlib_decompress — Decompress mysqlpump ZLIB-Compressed Output
zlib-flate	The zlib-flate program is part of the qpdf package.
zmf2raw	zmf2raw is used to test libzmf.
zmf2svg	zmf2svg converts Zoner Draw documents to SVG.
zsh	zsh - the Z shell
zsh-5.8	zsh-5.8
Back to Top

@@ Line 1: / Line 1: @@
 {{welcome}}
-{{maintenance}}
 {{Navbar System Administation Utilities}}
 ==Introduction==
-Here you will find a lot of small applications.
+Here you will find a lot of small applications. Most of them already installed with GhostBSD.
-This directory contains more or less 2500 utilities, application, tools. If you install an application and don't find it as a starter on your taskbar, it is most likely you will find the application in this directory. You can start this application via cli or set a link to your desktop.
+This directory contains more or less 2500 utilities, applications, tools. If you install an application and don't find it as a starter on your taskbar, it is most likely you will find the application in this directory. You can start this application via cli or set a link to your desktop.
-On this page we will not describe all applications in the directory ''/usr/local/bin'' yet, but a short extraction.
+Not all applications come with man pages.
 ==Content==
@@ Line 32: / Line 32: @@
 |aainfo||[https://www.freebsd.org/cgi/man.cgi?query=aafire&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aafire, aainfo], aasavefont, aatest - aalib example programs
 |-
-|aalib-config||
+|aalib-config||[https://www.freshports.org/graphics/aalib/ aalib] ASCII art library; AA-lib is a low-level graphics library similar to many other libraries except for the fact that AA-lib does not require a graphics device!  In
+fact, no "graphical" output is possible.  AA-lib uses a modern, high-techascii-art renderer in place of outmoded and cumbersome graphical output. WWW: http://aa-project.sourceforge.net/aalib/
 |-
 |aasavefont||[https://www.freebsd.org/cgi/man.cgi?query=aafire&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html aafire, aainfo, aasavefont], aatest - aalib example programs
@@ Line 119: / Line 120: @@
 |-
 |bzz||[https://www.freebsd.org/cgi/man.cgi?query=bzz&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bzz] - DjVu general purpose compression utility.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 131: / Line 133: @@
 !colspan="2"|
 |-
-|c44||
+|c44||[https://www.freebsd.org/cgi/man.cgi?query=c44&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html C44] produces	a DjVuPhoto encoded image.  The	input image file inputfilename       can be either a portable	gray-map (PGM) or a  portable  pix-map	PPM).
+Input images compressed with JPEG are also accepted. It is however suggested to only use high quality	JPEG  files  (low  compression	ratio,  large  size)  because the wavelet compression will increase the defects       already present in highly compressed JPEG files.
 |-
-|c++9||
+|c++9||[https://en.wikipedia.org/wiki/C%2B%2B C++]  is a general-purpose programming language created by Bjarne Stroustrup as an extension of the C programming language, or "C with Classes".
 |-
-|cairo-sphinx||
+|cairo-sphinx||[https://www.freshports.org/graphics/cairo/ Cairo] is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System and in-memory image buffers. PostScript and PDF file output is planned. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).
 |-
-|cairo-trace||
+|cairo-trace||[https://www.freshports.org/graphics/cairo/ Cairo] is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System and in-memory image buffers. PostScript and PDF file output is planned. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).
 |-
-|caja||
+|caja||[https://www.freebsd.org/cgi/man.cgi?query=caja&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Caja] - The MATE File Manager
 |-
-|caja-autorun-software||
+|caja-autorun-software||[https://www.freebsd.org/cgi/man.cgi?query=caja-autorun-software&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html caja-autorun-software] - Autorun Software	in Caja
 |-
-|caja-connect-server||
+|caja-connect-server||[https://www.freebsd.org/cgi/man.cgi?query=caja-connect-server&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Caja Connect Server] is the connection manager for Caja/MATE. It is provided as	a part of the Caja package for the MATE	Desktop	Environment.
+Simply running "caja-connection-server" will open a simple  dialog  allowing  you  to select the server type, and specify the server address, port, and login credentials for the server you want to connect to. This  is  the	same  dialog accessible	via the	Caja "File" menu, and the MATE       Desktop "Places"	menu.
 |-
-|caja-file-management-properties||
+|caja-file-management-properties||[https://www.freebsd.org/cgi/man.cgi?query=caja-file-management-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Caja  File  Management  Properties] is distributed as a part of the caja package and is used to configure	Caja's preferences.  It	 is  typically  accessible  through  the	 "Edit"	 menu  in  Caja	browser	windows, or by       pressing	"ALT+E"	and then "N" once the menu opens.
+File Management Preferences allows the user to configure	the  way  caja       behaves.
 |-
-|caja-sendto||
+|caja-sendto||[https://www.freebsd.org/cgi/man.cgi?query=caja-sendto&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html caja-sendto]  -  convenience application to send a file via email	or instant messenger
 |-
-|canberra-gtk-play||
+|canberra-gtk-play||[http://manpages.ubuntu.com/manpages/bionic/man1/canberra-gtk-play.1.html canberra-gtk-play]  plays  sound  events that are specified by the XDG Sound Theme and Name       Specification.
 |-
 |cancel||
 |-
-|caspol||
+|caspol||[https://helpmanual.io/help/caspol/ Command line tool to modify Code Access Security policies].
 |-
-|cb2ti3||
+|cb2ti3||[https://www.argyllcms.com/doc/cb2ti3.html cb2ti3] Convert Colorblind format CMY/RGB test chart information into Argyll .ti3 CGATS profile forma files. This allows the use of raw Colorblind profiling data, to be used for Argyll profile creation or validation..
 |-
-|cbc||
+|cbc||[https://www.freebsd.org/cgi/man.cgi?query=cbc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cbc] - Couchbase Client Commandline Utility
 |-
-|cccheck||
+|cccheck||[https://www.freebsd.org/cgi/man.cgi?query=cccheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cccheck]-  Perform  static  code contracts verification	for CLR	assemblies.
 |-
-|ccomps||
+|ccomps||[https://www.freebsd.org/cgi/man.cgi?query=ccomps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ccomps] -	connected components filter for	graphs
 |-
-|ccrewrite||
+|ccrewrite||[https://www.freebsd.org/cgi/man.cgi?query=ccrewrite&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ccrewrite]  - Rewrite CLR	assemblies for runtime code contract verification.
 |-
-|cctiff||
+|cctiff||[https://www.argyllcms.com/doc/cctiff.html cctiff] Color convert a TIFF or JPEG file using a sequence of compatible ICC device profiles, abstract profiles, device link profiles and calibration files. The sequence may be zero length, facilitating format conversion and ICC profile embedding without otherwise altering the pixel values.
 |-
-|ccxxmake||
+|ccxxmake||[https://www.argyllcms.com/doc/ccxxmake.html ccxxmake] For Colorimeters that rely on a calibration matrix, ccxxmake allows creation of a correction matrix file (ccmx) for a particular Colorimeter & Display combination, by making use a reference Spectrometer or Colorimeter instrument. This can then be used to improve the accuracy of subsequent measurements with that Colorimeter on that Display by using it with the dispcal, dispread and spotread -X option. A ccmx file can also be installed, and will then appear in the available display type selection (-y option). See Wide Gamut Displays and Colorimeters for more information on why this may be useful. [ Note that to make use of a colorimeter as a CCMX reference, you will have to provide two .ti3 files rather than using interactive measurement- see -f. ]
 |-
-|cd-convert||
+|cd-convert||[https://www.freebsd.org/cgi/man.cgi?query=cd-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-it8] -	Color Manager Testing Tool
 |-
-|cd-create-profile||
+|cd-create-profile||[http://manpages.ubuntu.com/manpages/bionic/man1/cd-create-profile.1.html cd-create-profile] - Color Manager Profile Creation Tool
 |-
-|cd-drive||
+|cd-drive||[https://www.freebsd.org/cgi/man.cgi?query=cd-drive&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-drive] - show CD-ROM drive characteristics
 |-
-|cd-fix-profile||
+|cd-fix-profile||[http://manpages.ubuntu.com/manpages/bionic/man1/cd-fix-profile.1.html cd-fix-profile] - Color Manager Testing Tool
 |-
 |cd-iccdump||
 |-
-|cd-info||
+|cd-info||[https://www.freebsd.org/cgi/man.cgi?query=cd-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-info] - shows Information about a CD or CD-image
 |-
-|cd-it8||
+|cd-it8||[https://www.freebsd.org/cgi/man.cgi?query=cd-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-it8] -	Color Manager Testing Tool
 |-
-|cd-paranoia||
+|cd-paranoia||[https://www.freebsd.org/cgi/man.cgi?query=cd-paranoia&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-paranoia]  9.8	(Paranoia release III via libcdio) - an	audio CD reading utility which includes extra	data verification features
 |-
-|cd-read||
+|cd-read||[https://www.freebsd.org/cgi/man.cgi?query=cd-read&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cd-read] - reads Information from	a CD or	CD-image
 |-
-|cdda2wav||
+|cdda2wav||[https://www.freebsd.org/cgi/man.cgi?query=cdda2wav&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cdda2wav] - dumps	CD audio data into sound files with extra data verification
 |-
-|cdda-player||
+|cdda-player||[https://manpages.debian.org/testing/libcdio-utils/cdda-player.1.en.html cdda-player]: - simple curses CD player
 |-
-|cddb_query||
+|cddb_query||[http://libcddb.sourceforge.net/tutorial.html cddb_query] This function will recalculate the disc ID of the disc provided to it and then query the local cache or the remote server for the requested information. The first disc in the query can now be processed (3). We decrement the match counter and if it has not yet reached zero, we retrieve the next match with cddb_query_next (4).
 |-
-|cdparanoia||
+|cdparanoia||[https://www.freebsd.org/cgi/man.cgi?query=cdparanoia&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cdparanoia]  (Paranoia  release III) - an	audio CD reading utility which includes	extra data verification	features
 |-
 |cdr2raw||
@@ Line 201: / Line 207: @@
 |cdr2xhtml||
 |-
-|cdrdao||
+|cdrdao||[https://www.freebsd.org/cgi/man.cgi?query=cdrdao&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cdrdao] -	reads and writes CDs in	disc-at-once mode
 |-
-|cdrecord||
+|cdrecord||[https://www.freebsd.org/cgi/man.cgi?query=cdrecord&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Cdrecord] is used	to record data or audio	Compact	 Discs	on  an	Orange     Book CD-recorder, to write DVD media on a DVD-recorder or to write BluRay media on a BluRay-recorder.
 |-
-|cert2spc||
+|cert2spc||[https://www.freebsd.org/cgi/man.cgi?query=cert2spc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cert2spc]	 -  Transform  multiple	 X.509 certificates to a Software Publisher Certificate
 |-
-|cert-sync||
+|cert-sync||[https://www.freebsd.org/cgi/man.cgi?query=cert-sync&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cert-sync] - Mono	Certificate Store Sync Tool
 |-
-|certmgr||
+|certmgr||[https://www.freebsd.org/cgi/man.cgi?query=certmgr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html certmgr] - Mono Certificate Manager (CLI version)
 |-
-|certtool||
+|certtool||[https://www.freebsd.org/cgi/man.cgi?query=certtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html certtool] - GnuTLS certificate tool
 |-
 |certutil||
-|-
-|chardetect||
 |-
 |chardetect-3.7||
-|-
-|charmap||
 |-
 |chartread||
 |-
-|chattr||
+|chattr||[https://www.freebsd.org/cgi/man.cgi?query=chattr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chattr] -	change file attributes on a Linux file system
 |-
-|checkmk||
+|checkmk||[https://www.freebsd.org/cgi/man.cgi?query=checkmk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html checkmk] -  Awk	script	for  generating	 C unit	tests for use with the    Check unit testing framework.
 |-
-|checkvms||
+|checkXML5||[https://www.freebsd.org/cgi/man.cgi?query=checkXML5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html checkXML5] - An XML lint tool for	KDE DocBook XML	documents.
 |-
-|checkXML5||
+|cheese||[https://www.freebsd.org/cgi/man.cgi?query=cheese&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cheese] -	tool to	take pictures and videos from your webcam
-|-
-|cheese||
 |-
 |cheetah||
@@ Line 237: / Line 239: @@
 |cheetah-analyze||
 |-
-|bin/cheetah-compile||
+|cheetah-compile||
 |-
-|chem||
+|chem||[https://www.freebsd.org/cgi/man.cgi?query=chem&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chem] - groff preprocessor for producing chemical	structure diagrams
 |-
 |cherryd-2.7||
@@ Line 245: / Line 247: @@
 |cherrytree||
 |-
-|chktrust||
+|chktrust||[https://www.freebsd.org/cgi/man.cgi?query=chktrust&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chktrust]	- Check	the trust of a PE executable.
 |-
 |chm_http||
@@ Line 251: / Line 253: @@
 |chmorph||
 |-
-|chrome||
+|chrome||[https://www.freebsd.org/cgi/man.cgi?query=chrome&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html chromium-browser] - the web browser from Google
 |-
 |chromedriver||
 |-
-|cifsdd||
+|cifsdd||[https://www.freebsd.org/cgi/man.cgi?query=cifsdd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cifsdd] -	convert	and copy a file	over SMB, This tool is part of the	[https://www.freebsd.org/cgi/man.cgi?query=samba&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports samba(7)] suite.
 |-
 |cinnamon-desktop-migrate-mediakeys||
 |-
-|circo||
+|cjb2||[https://www.freebsd.org/cgi/man.cgi?query=cjb2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cjb2] - Simple DjVuBitonal encoder.
-|-
-|cjb2||
-|-
-|cjpeg||
 |-
-|cjs||
+|cjpeg||[https://www.freebsd.org/cgi/man.cgi?query=cjpeg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cjpeg] - compress	an image file to a JPEG	file
 |-
 |cjs-console||
@@ Line 275: / Line 274: @@
 |ck-list-sessions||
 |-
-|clang80||
+|clang80||[https://www.unix.com/man-page/freebsd/1/clang/ clang] is a C, C++, and Objective-C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
+     Depending on which high-level mode setting is passed, Clang will stop before doing a full link.  While Clang is highly integrated, it is
+     important to understand the stages of compilation, to understand how to invoke it.
 |-
 |classpath||
@@ Line 296: / Line 297: @@
 |-
 |clearspd||
-|-
-|clhsdb||
-|-
-|cliqz||
 |-
 |clp||
 |-
-|cluster||
+|cluster||[https://www.freebsd.org/cgi/man.cgi?query=cluster&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cluster]	- find clusters	in a graph and augment the graph with this information.
 |-
 |cmis-client||
@@ Line 333: / Line 330: @@
 |copytex||
 |-
-|corelist||
+|corelist||[https://www.freebsd.org/cgi/man.cgi?query=corelist&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html corelist] - a commandline	frontend to Module::CoreList
 |-
 |corpus2array||
@@ Line 339: / Line 336: @@
 |corrupt_mpeg2||
 |-
-|cpaldjvu||
+|cpaldjvu||[https://www.freebsd.org/cgi/man.cgi?query=cpaldjvu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cpaldjvu] - DjVuDocument encoder for low-color images.
 |-
-|cpan||
+|cpan||[https://www.freebsd.org/cgi/man.cgi?query=cpan&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html This script] provides a command interface	(not a shell) to CPAN. At the        moment it uses CPAN.pm to do the	work, but it is	not a one-shot command       runner for CPAN.pm.
 |-
 |cpp9||
@@ Line 351: / Line 349: @@
 |createwin||
 |-
-|crlupdate||
+|crlupdate||[https://www.freebsd.org/cgi/man.cgi?query=crlupdate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html crlupdate] - Mono	Certficate Revocation List Downloader and Updater
+This tool allows	the download of	new, or	update of existing, Certficate       Revocation List (CRL) associated	with the certificates present  in  the       user  (default)	or  machine  stores. The CRL present in	the stores are       used to determine the validity of  unexpired,  trusted  X.509  certificates.	To ensure CRL are always fresh consider	automating the updates       using the at (or	similar) command(s).
 |-
 |crlutil||
@@ Line 357: / Line 356: @@
 |croco-0.6-config||
 |-
-|csc||
+|csc||[https://www.freebsd.org/cgi/man.cgi?query=csc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html csc] - driver program for	the CHICKEN Scheme compiler
 |-
-|cscope||
+|cscope||[https://www.freebsd.org/cgi/man.cgi?query=cscope&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cscope] -	interactively examine a	C program
 |-
-|csepdjvu||
+|csepdjvu||[https://www.freebsd.org/cgi/man.cgi?query=csepdjvu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html csepdjvu] - DjVu encoder for separated data files.
 |-
-|csharp||
+|csharp||[https://www.freebsd.org/cgi/man.cgi?query=csharp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html csharp, gsharp] -	Interactive C# Shell
 |-
-|csi||
+|csi||The [https://www.freebsd.org/cgi/man.cgi?query=csi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CHICKEN Scheme interpreter]
 |-
 |csslint-0.6||
@@ Line 373: / Line 374: @@
 |cuberender||
 |-
-|cue2toc||
+|cue2toc||[https://www.freebsd.org/cgi/man.cgi?query=cue2toc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Cue2toc] converts  cuefile from CUE to TOC format and writes the	result  to tocfile.  If either cuefile or tocfile is omitted or a  single  dash       "-"  cue2toc reads from standard	input and writes to standard ouput respectively.
 |-
-|cups-calibrate||
+|cups-calibrate||[https://www.freebsd.org/cgi/man.cgi?query=cups-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-calibrate] -	ESP CUPS Printer Calibration Tool This program allows you to calibrate the	color output of	printers using   the Gutenprint CUPS driver. Please note that this  program  only	 works       with the	Gutenprint CUPS	driver.
 |-
-|cups-config||
+|cups-config||[https://www.freebsd.org/cgi/man.cgi?query=cups-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-config] - get cups api, compiler, directory,	and link information.
 |-
-|cupstestdsc||
+|cupstestdsc||[https://www.freebsd.org/cgi/man.cgi?query=cupstestdsc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupstestdsc]  tests  the	conformance  of	 PostScript files to the Adobe PostScript Language Document Structuring	Conventions Specification version  3.0.  The results of testing and any other	output are sent	to the       standard	output.	 The second form of the	command	reads PostScript  from      the standard input.
 |-
-|cupstestppd||
+|cupstestppd||[https://www.freebsd.org/cgi/man.cgi?query=cupstestppd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupstestppd] tests the conformance of PPD	files to the Adobe  PostScript Printer Description file	format specification version 4.3.  It can also     be used to list the supported options and  available  fonts  in	a  PPD      file.   The  results  of	 testing  and any other	output are sent	to the       standard	output.
 |-
-|curl||
+|curl||[https://www.freebsd.org/cgi/man.cgi?query=curl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html curl]  is	 a tool	to transfer data from or to a server, using one	of the   supported protocols (DICT, FILE,	FTP, FTPS, GOPHER, HTTP, HTTPS,	 IMAP,      IMAPS,  LDAP,  LDAPS,  POP3,  POP3S,  RTMP, RTSP, SCP, SFTP, SMB, SMBS,       SMTP, SMTPS, TELNET and TFTP). The command is designed to work  without       user interaction.
 |-
-|curl-config||
+|curl-config||[https://www.freebsd.org/cgi/man.cgi?query=curl-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html curl-config] - Get information about a libcurl installation
 |-
 |cvlc||
 |-
-|cvsps||
+|cvsps||[https://www.freebsd.org/cgi/man.cgi?query=cvsps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CVSps] - create patchset information from	CVS
 |-
-|cvt||
+|cvt||[https://www.freebsd.org/cgi/man.cgi?query=cvt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cvt] - calculate VESA CVT	mode lines
 |-
 |cvtsudoers||
 |-
-|cwebp||
+|cwebp||[https://www.freebsd.org/cgi/man.cgi?query=cwebp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cwebp] - compress	an image file to a WebP	file
+|-
+|cxpm||[https://www.freebsd.org/cgi/man.cgi?query=cxpm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cxpm] - Check an XPM (X PixMap) file, versions XPM 1, 2, or 3.
 |-
-|cxpm||
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 413: / Line 417: @@
 |dazzle-list-counters||
 |-
-|db_archive-5||
+|dbus-binding-tool||[https://www.freebsd.org/cgi/man.cgi?query=dbus-binding-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-binding-tool] - C language GLib bindings generation utility.
 |-
-|db_archive-5.3||
+|dbus-cleanup-sockets||[https://www.freebsd.org/cgi/man.cgi?query=dbus-cleanup-sockets&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-cleanup-sockets] - clean up leftover	sockets	in a directory
 |-
-|db_checkpoint-5||
+|dbus-daemon||[https://www.freebsd.org/cgi/man.cgi?query=dbus-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-daemon] - Message bus daemon
 |-
-|db_checkpoint-5.3||
+|dbus-launch||[https://www.freebsd.org/cgi/man.cgi?query=dbus-launch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-launch] - Utility to	start a	message	bus from a shell script
 |-
-|db_deadlock-5||
+|dbus-monitor||[https://www.freebsd.org/cgi/man.cgi?query=dbus-monitor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-monitor] - debug probe to print message bus messages
 |-
-|db_deadlock-5.3||
+|dbus-run-session||[https://www.freebsd.org/cgi/man.cgi?query=dbus-run-session&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-run-session]	- start	a process as a new D-Bus session
 |-
-|db_dump185-5||
+|dbus-send||[https://www.freebsd.org/cgi/man.cgi?query=dbus-send&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-send] - Send	a message to a message bus
 |-
-|db_dump185-5.3||
+|dbus-test-tool||[https://www.freebsd.org/cgi/man.cgi?query=dbus-test-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-test-tool] -	D-Bus traffic generator	and test tool
 |-
-|db_dump-5||
+|dbus-update-activation-environment||[https://www.freebsd.org/cgi/man.cgi?query=dbus-update-activation-environment&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-update-activation-environment] - update environment used for	D-Bus      session services
 |-
-|db_dump-5.3||
+|dbus-uuidgen||[https://www.freebsd.org/cgi/man.cgi?query=dbus-uuidgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbus-uuidgen] - Utility to generate UUIDs
 |-
-|db_hotbackup-5||
+|dbwrap_tool||[https://www.freebsd.org/cgi/man.cgi?query=dbwrap_tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dbwrap_tool] - low level TDB/CTDB	manipulation tool using	the dbwrap       interface. This tool is part of the	samba(7) suite.
 |-
-|db_hotbackup-5.3||
+|dcadec||[https://www.freebsd.org/cgi/man.cgi?query=dcadec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dcadec] -	decode DTS Coherent Acoustics audio streams
 |-
-|db_load-5||
+|dconf||[https://www.freebsd.org/cgi/man.cgi?query=dconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dconf] - Simple tool for manipulating a dconf database
 |-
-|db_load-5.3||
+|dconf-editor||The  [https://www.freebsd.org/cgi/man.cgi?query=dconf-editor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dconf-editor]  program  provides  a graphical interface for editing       settings	that are stored	in the dconf database.
 |-
-|db_log_verify-5||
+|ddjvu||[https://www.freebsd.org/cgi/man.cgi?query=ddjvu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ddjvu] - Command line DjVu decoder.
 |-
-|db_log_verify-5.3||
+|derb||[https://www.freebsd.org/cgi/man.cgi?query=derb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html derb] reads the compiled resource	bundle files  passed  on  the  command  line and	write them back	in text	form.  The resulting text files	have a       .txt extension while compiled resource bundle  source  files  typically       have a .res extension.
 |-
-|db_printlog-5||
+|derdump||[https://www.freebsd.org/cgi/man.cgi?query=derdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Derdump] dumps  a  DER structure	read from a file or, if	none is	specified, from standard input to standard output.  It is mainly intended as      a debugging tool.
-|-
-|db_printlog-5.3||
-|-
-|db_recover-5||
-|-
-|db_recover-5.3||
-|-
-|db_replicate-5||
-|-
-|db_replicate-5.3||
-|-
-|db_stat-5||
-|-
-|db_stat-5.3||
-|-
-|db_tuner-5||
-|-
-|db_tuner-5.3||
-|-
-|db_upgrade-5||
-|-
-|db_upgrade-5.3||
-|-
-|db_verify-5||
-|-
-|db_verify-5.3||
-|-
-|dbus-binding-tool||
-|-
-|dbus-cleanup-sockets||
-|-
-|dbus-daemon||
-|-
-|dbus-launch||
-|-
-|dbus-monitor||
-|-
-|dbus-run-session||
-|-
-|dbus-send||
-|-
-|dbus-test-tool||
-|-
-|dbus-update-activation-environment||
-|-
-|dbus-uuidgen||
-|-
-|dbwrap_tool||
-|-
-|dcadec||
-|-
-|dconf||
-|-
-|dconf-editor||
-|-
-|ddjvu||
-|-
-|derb||
-|-
-|derdump||
 |-
 |deriv||
 |-
-|designer||
+|desktop-file-install||[https://www.freebsd.org/cgi/man.cgi?query=desktop-file-install&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  The desktop-file-install] program	is a tool to install,  and  optionally    edit,  desktop files. The desktop-file-edit program is a	tool to	edit a       desktop file. They are mostly useful for	developers and packagers.
 |-
-|desktop-file-edit||
+|desktop-file-validate||[https://www.freebsd.org/cgi/man.cgi?query=desktop-file-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html desktop-file-validate - Validate] desktop	entry files
 |-
-|desktop-file-install||
+|desktoptojson||[https://www.freebsd.org/cgi/man.cgi?query=desktoptojson&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html desktoptojson] - Converts	a .desktop file	to a .json file.
 |-
-|desktop-file-validate||
+|devdump||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
-|-
-|desktoptojson||
-|-
-|devdump||
 |-
 |dht-example||
@@ Line 525: / Line 470: @@
 |diagtool80||
 |-
-|diffimg||
+|diffimg||[https://www.freebsd.org/cgi/man.cgi?query=diffimg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html diffimg] - Calculates intersection between two images
 |-
-|dijkstra||
+|dijkstra||[https://www.freebsd.org/cgi/man.cgi?query=dijkstra&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dijkstra]	- single-source	distance filter
 |-
-|ding||
+|ding||[https://www.freebsd.org/cgi/man.cgi?query=ding&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ding] is a dictionary lookup program for X Windows/Unix. It comes	with a       German-English dictionary with about 345,000 entries.
 |-
 |dinoshade||
 |-
-|dirmngr||
+|dirmngr||[https://www.freebsd.org/cgi/man.cgi?query=dirmngr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Dirmngr] is a server for managing	and downloading	certificate revocation
+lists (CRLs) for	X.509 certificates and for  downloading	 the  certificates  themselves. Dirmngr also handles OCSP requests as	an alternative       to CRLs.	Dirmngr	is either invoked internally by	gpgsm (from  GnuPG  2)
+or when running as a system daemon through the dirmngr-client tool.
 |-
-|dirmngr-client||
+|dirmngr-client||[https://www.freebsd.org/cgi/man.cgi?query=dirmngr-client&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dirmngr-client] -	Tool to	access the Dirmngr services
 |-
-|disco||
+|disco||[https://www.freebsd.org/cgi/man.cgi?query=disco&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html disco]  is  a  tool  for discovering web services	and for	retireving the        documents that describe those services.
 |-
 |dispcal||
@@ Line 547: / Line 495: @@
 |dissolve||
 |-
-|djpeg||
+|djpeg||[https://www.freebsd.org/cgi/man.cgi?query=djpeg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djpeg]  decompresses  the	 named	JPEG file, or the standard input if no       file is named, and produces an image file on the	standard output.  PBM-PLUS  (PPM/PGM),	 BMP,  GIF, Targa, or RLE (Utah	Raster Toolkit)	output       format can be selected.
 |-
-|djvm||
+|djvm||[https://www.freebsd.org/cgi/man.cgi?query=djvm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvm] - Manipulate bundled multi-page DjVu documents.
 |-
-|djvmcvt||
+|djvmcvt||[https://www.freebsd.org/cgi/man.cgi?query=djvmcvt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvmcvt] - Convert multi-page DjVu documents.
 |-
-|djvudigital||
+|djvudigital||[https://www.freebsd.org/cgi/man.cgi?query=djvudigital&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvudigital] - creates DjVu files	from PS	or PDF files.
 |-
-|djvudump||
+|djvudump||[https://www.freebsd.org/cgi/man.cgi?query=djvudump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvudump	]- Display internal structure of	DjVu files.
 |-
-|djvuextract||
+|djvuextract||[https://www.freebsd.org/cgi/man.cgi?query=djvuextract&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvuextract] - Extract chunks from DjVu image files
 |-
-|djvumake||
+|djvumake||[https://www.freebsd.org/cgi/man.cgi?query=djvumake&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvumake] - Assemble DjVu	image files.
 |-
-|djvups||
+|djvups||[https://www.freebsd.org/cgi/man.cgi?query=djvups&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvups] -	Convert	DjVu documents to PostScript.
 |-
-|djvused||
+|djvused||[https://www.freebsd.org/cgi/man.cgi?query=djvused&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvused] - Multi-purpose DjVu document editor.
 |-
-|djvuserve||
+|djvuserve||Program	[https://www.freebsd.org/cgi/man.cgi?query=djvuserve&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvuserve]  is  a  CGI  program	that can be executed by	a HTTP        server for serving DjVu documents.  This	program	is able	to  conver
 |-
-|djvutoxml||
+|djvutoxml||[https://www.freebsd.org/cgi/man.cgi?query=djvutoxml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvutoxml, djvuxmlparser] - DjVuLibre XML	Tools; The  DjVuLibre  XML  Tools provide for editing the metadata, hyperlinks and hidden text associated with	DjVu  files.   Unlike  djvused(1)  the       DjVuLibre  XML  Tools rely on the XML technology	and can	take advantage       of XML editors and verifiers.
 |-
-|djvutxt||
+|djvutxt||[https://www.freebsd.org/cgi/man.cgi?query=djvutxt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvutxt] - Extract the hidden text from DjVu documents.
 |-
-|djvuxmlparser||
+|djvuxmlparser||[https://www.freebsd.org/cgi/man.cgi?query=djvutoxml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html djvutoxml, djvuxmlparser] - DjVuLibre XML	Tools; The  DjVuLibre  XML  Tools provide for editing the metadata, hyperlinks       and hidden text associated with	DjVu  files.   Unlike  djvused(1)  the       DjVuLibre  XML  Tools rely on the XML technology	and can	take advantage       of XML editors and verifiers.
 |-
 |dlist-begin-call-end||
@@ Line 593: / Line 545: @@
 |dlist-tri-mat-tri||
 |-
-|dm-tool||
+|dm-tool||[https://www.freebsd.org/cgi/man.cgi?query=dm-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dm-tool] - a tool	to control the display manager
 |-
 |dmcs||
 |-
-|doas||
+|doas||[https://www.freebsd.org/cgi/man.cgi?query=doas&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html doas] -- execute commands as another user
 |-
-|dot||
+|dot||[https://www.freebsd.org/cgi/man.cgi?query=dot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dot] - filter for	drawing	directed graphs
-|-
-|dot2gxl||
 |-
 |dot_builtins||
 |-
-|dotty||
+|dotty||[https://www.freebsd.org/cgi/man.cgi?query=dotty&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dotty]  is  a  graph editor for the X Window System.  It may be run as a       standalone editor, or as	a front	end for	applications that use  graphs.    It can control multiple windows viewing different graphs.
 |-
 |dpkg||[https://www.freebsd.org/cgi/man.cgi?query=dpkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg]  is	 a  tool to install, build, remove and manage Debian packages.
@@ Line 632: / Line 582: @@
 |dpkg-gencontrol||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-gencontrol&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-gencontrol]	reads  information from	an unpacked Debian source tree        and  generates  a  binary  package  control  file  (which  defaults  to     debian/tmp/DEBIAN/control);  during  this  process it will simplify the       relation	fields.
 |-
-|dpkg-gensymbols||
+|dpkg-gensymbols||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-gensymbols&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-gensymbols] scans a temporary build tree  (debian/tmp  by  default)      looking	for  libraries	and  generates a symbols file describing them.   This file, if non-empty,	is then	installed in the  DEBIAN  subdirectory       of  the	build  tree  so	 that  it  ends	 up  included  in  the control   information of the package.
 |-
-|dpkg-maintscript-helper||
+|dpkg-maintscript-helper||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-maintscript-helper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-maintscript-helper]	-  works  around  known	 dpkg  limitations  in  maintainer scripts
 |-
-|dpkg-mergechangelogs||
+|dpkg-mergechangelogs||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-mergechangelogs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-mergechangelogs] - 3-way merge of debian/changelog files
 |-
-|dpkg-name||
+|dpkg-name||This manual page	documents the [https://www.freebsd.org/cgi/man.cgi?query=dpkg-name&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-name] program	which provides an easy      way to rename Debian packages into their	full  package  names.  A  full     package	name  consists of package_version_architecture.package-type as       specified in the	control	file of	the package. The version part  of  the      filename	 consists  of  the  upstream  version  information  optionally      followed	by a hyphen and	the  revision  information.  The  package-type      part comes from that field if present or	fallbacks to deb.
 |-
-|dpkg-parsechangelog||
+|dpkg-parsechangelog||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-parsechangelog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-parsechangelog]  reads  and	parses	the  changelog	of an unpacked     Debian source tree and outputs the information in it to standard	output    in a machine-readable form.
 |-
-|dpkg-query||
+|dpkg-query||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-query] - a tool to query the	dpkg database
 |-
-|dpkg-scanpackages||
+|dpkg-scanpackages||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-scanpackages&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-scanpackages] sorts through a tree of Debian	 binary	 packages  and     creates	a  Packages file, used by apt(8), dselect(1), etc, to tell the      user what packages are available	for installation. These	Packages files       are  the	 same  as those	found on Debian	archive	sites and CD-ROMs. You       might use dpkg-scanpackages yourself if making  a  directory  of	 local      packages	to install on a	cluster	of machines.
 |-
-|dpkg-scansources||
+|dpkg-scansources||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-scansources&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-scansources]	scans the given	binary-dir for .dsc files.  These  are       used to create a	Debian source index, which is output to	stdout.
 |-
-|dpkg-shlibdeps||
+|dpkg-shlibdeps||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-shlibdeps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-shlibdeps] -	generate shared	library	substvar dependencies
 |-
-|dpkg-source||
+|dpkg-source||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-source&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-source] - Debian source package (.dsc) manipulation tool
 |-
-|dpkg-split||
+|dpkg-split||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-split&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-split]  splits  Debian  binary package files	into smaller parts and        reassembles them	again, to support the storage of large	package	 files     on small	media such as floppy disks.
 |-
-|dpkg-statoverride||
+|dpkg-statoverride||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-statoverride&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-statoverride] - override ownership and mode of files
 |-
-|dpkg-trigger||
+|dpkg-trigger||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-trigger&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-trigger]  is	 a  tool to explicitly activate	triggers and check for       its support on the running dpkg.
 |-
-|dpkg-vendor||
+|dpkg-vendor||[https://www.freebsd.org/cgi/man.cgi?query=dpkg-vendor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dpkg-vendor]  is	a  tool	 to  query information about vendors listed in      /usr/local/etc/dpkg/origins.	   /usr/local/etc/dpkg/origins/default       contains	information about the current vendor.
 |-
 |draw2arrays||
@@ Line 674: / Line 625: @@
 |drawrange||
 |-
-|driverless||
+|dropbox||[https://www.freebsd.org/cgi/man.cgi?query=dropbox&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dropbox] - A command line	interface to the Dropbox service
-|-
-|dropbox||
 |-
 |dsbmc||
 |-
-|dsbmc-cli||
+|dsbmc-cli||[https://www.freebsd.org/cgi/man.cgi?query=dsbmc-cli&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dsbmc-cli] is a command-line client	for DSBMD that provides	a simple interface to	query information about	storage	devices, and to	send requests     to	mount, unmount and eject these.
 |-
-|dselect||
+|dselect||[https://www.freebsd.org/cgi/man.cgi?query=dselect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dselect] is one of the primary user interfaces for managing packages on       a Debian	system.	At the dselect main  menu,  the	 system	 administrator       can:
+* Update the list of available package versions,
+* View the status of installed and available packages,
+* Alter	package	selections and manage dependencies,
+* Install new packages or upgrade to newer versions.
 |-
 |dsymutil80||
@@ Line 688: / Line 642: @@
 |dtd2rng||
 |-
-|dtd2xsd||
+|dtd2xsd||[https://www.freebsd.org/cgi/man.cgi?query=dtd2xsd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dtd2xsd] - XML Schema generator from XML document	that contains DTD.
 |-
 |dtsdec||
@@ Line 704: / Line 658: @@
 |dvd+rw-mediainfo||
 |-
-|dvipdf||
+|dvipdf||[https://www.freebsd.org/cgi/man.cgi?query=dvipdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dvipdf] -	Convert	TeX DVI	file to	PDF using ghostscript and dvips
 |-
-|dwebp||
+|dwebp||[https://www.freebsd.org/cgi/man.cgi?query=dwebp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dwebp] - decompress a WebP file to an image file
 |-
 |dwp
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 719: / Line 675: @@
 |-
 !colspan="2"|
-|-
-|easy_install||
 |-
 |easy_install-2.7||
@@ Line 736: / Line 690: @@
 |echo-client-2||
 |-
-|edgepaint||
+|edgepaint||[https://www.freebsd.org/cgi/man.cgi?query=edgepaint&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html edgepaint]  takes	 as input a graph in DOT format	with node position information (the pos attribute) and colors	the edges in a	manner	making       it easier to tell them apart.
-|-
-|editorconfig||
 |-
 |editorconfig-0.12.2||
@@ Line 752: / Line 704: @@
 |einfo||
 |-
-|elfedit||
+|elfedit||[https://www.freebsd.org/cgi/man.cgi?query=elfedit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html elfedit] - Update	the ELF	header of ELF files. elfedit updates the ELF header of ELF files which have the matching ELF      machine and file	types.	The options control how	and which fields in       the ELF header should be	updated.
 |-
 |eLut||
 |-
-|enc2xs||
+|enc2xs||[https://www.freebsd.org/cgi/man.cgi?query=enc2xs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html enc2xs] builds a Perl extension for use by Encode	from either Unicode      Character Mapping files (.ucm) or Tcl Encoding Files (.enc).  Besides       being used internally during the	build process of the Encode module,       you can use enc2xs to add your own encoding to perl.  No	knowledge of       XS is necessary.
 |-
-|encguess||
+|encguess||[https://www.freebsd.org/cgi/man.cgi?query=encguess&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html encguess]	- guess	character encodings of files; The encoding identification is done by checking one encoding type at a        time until all but the right type are eliminated. The set of encoding       types to	try is defined by the -s parameter and defaults	to ascii, utf8       and UTF-16/32 with BOM. This can	be overridden by passing one or	more       encoding	types via the -s parameter. If you need	to pass	in multiple       suspect encoding	types, use a quoted string with	the a space separating       each value.
 |-
-|enchant||
+|enchant||[https://www.freebsd.org/cgi/man.cgi?query=enchant&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Enchant] - a spellchecker;  Enchant	has a global and a per-user ordering file named	enchant.ordering.  It	lets the user specify which spelling backend to	use for	 individual languages	in the case when you care which	backend	gets used. The   global file is located in $(datadir)/enchant and	the per-user  file  is      located in ~/.enchant.  The per-user file takes precedence, if found.
 |-
 |enchant-2||
@@ Line 768: / Line 721: @@
 |enchant-lsmod-2||
 |-
-|encode_keychange||
+|encode_keychange||[https://www.freebsd.org/cgi/man.cgi?query=encode_keychange&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html encode_keychange] produces  a  KeyChange	 string	 using the old and new       passphrases as described	in Section 5 of	RFC 2274 "User-based  Security       Model  (USM)  for  version  3 of	the Simple Network Management Protocol       (SNMPv3)". -t option is mandatory and specifies the hash	transform type       to use.
 |-
-|engine||
+|engine||The [https://www.freebsd.org/cgi/man.cgi?query=engine&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html engine] command is used to query the status and capabilities of the       specified engine's.  Engines may	be specified before and	after all       other command-line flags.  Only those specified are queried.
 |-
-|engrampa||
+|engrampa||[https://www.freebsd.org/cgi/man.cgi?query=engrampa&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Engrampa] is the	official archive manager for the MATE Desktop Environment, it	is a graphical front-end to archiving utilities	 such  as  tar      and zip.	It is a	fork of	File Roller.
 |-
 |enum_chmLib||
@@ Line 778: / Line 731: @@
 |enumdir_chmLib||
 |-
-|envsubst||
+|envsubst||[https://www.freebsd.org/cgi/man.cgi?query=envsubst&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html envsubst] - substitutes environment variables in shell format strings
 |-
-|eom||
+|eom||[https://www.freebsd.org/cgi/man.cgi?query=eom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html eom] or the Eye of MATE is the official image viewer for the MATE	 Desktop  Environment.  It  aims  to be simplistic, lightweight, and easy to   use. The	Eye of MATE may	also be	used to	perform	basic tasks like image     flipping	and rotation.
 |-
-|eps2eps||
+|eps2eps||[https://www.freebsd.org/cgi/man.cgi?query=eps2eps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2ps, eps2eps] -	Ghostscript PostScript "distiller"
 |-
-|epsffit||
+|epsffit||[https://www.freebsd.org/cgi/man.cgi?query=epsffit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Epsffit] fits an EPSF file (encapsulated PostScript) to a	given bounding
+box.   The  coordinates of the box are given by (llx,lly) for the lower       left, and (urx,ury) for the upper right,	in PostScript units (points).
 |-
-|eqn||
+|eqn|| This manual page	describes the GNU version of [https://www.freebsd.org/cgi/man.cgi?query=eqn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html eqn], which	is part	of the  groff document formatting system.  eqn compiles descriptions  of	 equations  embedded	within troff input files into commands that are	understood by	troff.	Normally, it should be invoked using the -e option  of       groff.	The  syntax  is	quite compatible with Unix eqn.	 The output of       GNU eqn cannot be processed with	Unix troff; it must be processed  with       GNU troff.  If no files are given on the	command	line, the standard input will	be read.  A filename of	- will cause the standard input	to  be       read.
 |-
-|eqn2graph||
+|eqn2graph||[https://www.freebsd.org/cgi/man.cgi?query=eqn2graph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Reads]  an  EQN equation (one line) as input; produces an	image file (by
-|-
+default in Portable Network Graphics format) suitable for  the  Web  as       output.
-|erb||
 |-
 |erb26||
@@ Line 800: / Line 753: @@
 |es2tri||
 |-
-|escputil||
+|escputil||[https://www.freebsd.org/cgi/man.cgi?query=escputil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html escputil] is a command line utility to perform various maintenance tasks       on  Epson  Stylus inkjet	printers.  These tasks include head alignment,       head cleaning, nozzle check, printer identification, and	 retrieval  of       ink level from the printer.
 |-
 |espeak||
@@ Line 806: / Line 759: @@
 |event_rpcgen.py||
 |-
-|eview||
+|evince||[https://www.freebsd.org/cgi/man.cgi?query=evince&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Evince] is a document viewer capable of displaying multiple  and	single       page document formats like PDF and Postscript.  For more	general	information	 about	  Evince    please    visit	our	website	    at      [http://www.gnome.org/projects/evince/ Evince]
-|-
-|evim||
-|-
-|evince||
 |-
 |evince-previewer||
@@ Line 816: / Line 765: @@
 |evince-thumbnailer||
 |-
-|exctags||
+|exctags||[https://www.freebsd.org/cgi/man.cgi?query=exctags&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exctags] - Generate tag files for	source code
 |-
-|exempi||
+|exempi||[https://www.freebsd.org/cgi/man.cgi?query=exempi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exempi] -	command	line tool to manipulate	XMP metadata
 |-
-|exiv2||
+|exiv2||[https://www.freebsd.org/cgi/man.cgi?query=exiv2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exiv2] is	a program to read and write Exif, IPTC,	XMP metadata and image        comments	and can	read many vendor makernote tags. The  program  optionally  converts  between	Exif tags, XMP properties and IPTC datasets as       recommended by the Exif Standard, the IPTC Standard, the	XMP specification and	Metadata Working Group guidelines.
 |-
-|exo-csource||
+|exo-csource||[https://www.freebsd.org/cgi/man.cgi?query=exo-csource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exo-csource] is a	small utility that generates C code containing        arbitrary data, useful for compiling texts or other data	directly into       programs.
 |-
 |exo-desktop-item-edit||
 |-
-|exo-open||
+|exo-open||[https://www.freebsd.org/cgi/man.cgi?query=exo-open&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html exo-open] is a command line frontend to the Xfce Preferred Applications        framework. It can either	be used	to open	a list of urls with the       default URL handler or launch the preferred application for a certain       category.
 |-
 |exo-preferred-applications||
@@ Line 847: / Line 796: @@
 |-
 |ext4fuse||
-|-
-|extcheck||
 |-
 |external-ip||
 |-
-|extract_a52||
+|extract_a52||[https://www.freebsd.org/cgi/man.cgi?query=extract_a52&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extract_a52] - extract ATSC A/52 audio from a MPEG stream.
 |-
 |extract_chmLib||
 |-
-|extract_dca||
+|extract_dca||[https://www.freebsd.org/cgi/man.cgi?query=extract_dca&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extract_dca] - extract DTS Coherent Acoustics audio from a MPEG stream.
 |-
 |extract_dts||
 |-
-|extract_mpeg2||
+|extract_mpeg2||[https://www.freebsd.org/cgi/man.cgi?query=extract_mpeg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extract_mpeg2] - extract MPEG video streams from a multiplexed stream.
 |-
 |extracticc||
 |-
-|extractres||
+|extractres||[https://www.freebsd.org/cgi/man.cgi?query=extractres&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html extractres] - filter to extract resources	from a PostScript document
 |-
 |extractttag||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 878: / Line 827: @@
 !colspan="2"|
 |-
-|
+|faad||[https://www.freebsd.org/cgi/man.cgi?query=faad&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html faad] -- Process an Advanced Audio Codec stream;  This utility provides a command line interface to libfaad2.  This  program  reads  in MPEG-4 AAC files, processes, and	outputs	them in	either       Microsoft WAV, MPEG-4 AAC ADTS, or standard PCM formats.
-|
+|-
+|fakeCMY||
+|-
+|fakeread||
+|-
+|fax2ps||[https://www.freebsd.org/cgi/man.cgi?query=fax2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fax2ps] -	convert	a TIFF facsimile to compressed PostScripttm
+|-
+|fax2tiff||[https://www.freebsd.org/cgi/man.cgi?query=fax2tiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fax2tiff]	- create a TIFF	Class F	fax file from raw fax data
+|-
+|fbo_firecube||
+|-
+|fbobind||
+|-
+|fbotexture||
+|-
+|fbsdpkgupdate||
+|-
+|fc_solve_find_index_s2ints.py||
+|-
+|fc-cache||[https://www.freebsd.org/cgi/man.cgi?query=fc-cache&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-cache] - build	font information cache files; fc-cache	 scans	the font directories on	the system and builds font information cache files for applications using fontconfig for their  font       handling.
+|-
+|fc-cat||[https://www.freebsd.org/cgi/man.cgi?query=fc-cat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-cat] reads the	font information from cache files or related  to  font        directories and emits it	in ASCII form.
+|-
+|fc-conflist||
+|-
+|fc-list||[https://www.freebsd.org/cgi/man.cgi?query=fc-list&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-list] lists fonts and styles available	on the system for applications
+using  fontconfig.   If	any  elements  are  specified,	only those are       printed.	 Otherwise family and style are	printed, unless	verbose	output       is requested.
+|-
+|fc-match||[https://www.freebsd.org/cgi/man.cgi?query=fc-match&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  fc-match] matches	pattern	(empty pattern by default)  using  the	normal fontconfig matching rules to find the best font available. If --sort is      given, the sorted list of best matching fonts is	displayed.  The	 --all       option  works like --sort except	that no	pruning	is done	on the list of
+fonts.
+|-
+|fc-pattern||[https://www.freebsd.org/cgi/man.cgi?query=fc-pattern&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-pattern] parses pattern (empty	pattern	 by  default)  and  shows  the
+parsed  result.	If --config is given, config substitution is performed       on the pattern before being displayed.  If --default is given,  default       substitution is performed on the	pattern	before being displayed.
+|-
+|fc-query||[https://www.freebsd.org/cgi/man.cgi?query=fc-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-query] queries  font-file(s)	using  the normal fontconfig rules and
+prints out font pattern for each	face found.  If	--index	is given, only       one face	of each	file is	queried, otherwise all faces are queried.
+|-
+|fc-scan||[https://www.freebsd.org/cgi/man.cgi?query=fc-scan&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-scan] scans file(s) recursively and prints out	font pattern for  each
+face found.
+|-
+|fc-solve||[https://www.freebsd.org/cgi/man.cgi?query=fc-solve&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-solve] - automated solver for Freecell	and related Solitiare variants
+|-
+|fc-validate||[https://www.freebsd.org/cgi/man.cgi?query=fc-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fc-validate] validates font-file(s) if each fonts	satisfies the language
+coverage	 according to the orthography files in fontconfig.  If --index       is given, only one face of each file is validated, otherwise all	 faces       are validated.
+|-
+|ffmpeg||[https://www.freebsd.org/cgi/man.cgi?query=ffmpeg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ffmpeg] is a very	fast video and audio converter that can	also grab from    a live audio/video source. It can also convert between arbitrary	sample      rates and resize	video on the fly with a	high quality polyphase filter.
+|-
+|ffprobe||[https://www.freebsd.org/cgi/man.cgi?query=ffprobe&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ffprobe] gathers information from	multimedia streams and prints it in human- and machine-readable fashion.  For example it can be used to check the format of the container used by    a multimedia stream and the format and type of each media stream       contained in it.
+|-
+|fftw-wisdom||[https://www.freebsd.org/cgi/man.cgi?query=fftw-wisdom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fftw-wisdom] is	a utility to generate FFTW wisdom files, which contain
+saved information about how to optimally	compute	 (Fourier)  transforms     of  various  sizes.  FFTW is a free library to compute discrete Fourier       transforms in one or more dimensions, for arbitrary sizes, and of  both
+real  and  complex data,	among other related operations.	 More information on FFTW can	be found at the	FFTW home page: http://www.fftw.org
+|-
+|fftw-wisdom-to-conf||[https://www.freebsd.org/cgi/man.cgi?query=fftw-wisdom-to-conf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fftw-wisdom-to-conf]  is	a utility to generate C	configuration routines     from FFTW wisdom	files, where  the  latter  contain  saved  information       about  how  to optimally	compute	(Fourier) transforms of	various	sizes.      A configuration routine is a C subroutine that you link into your  program,  replacing	 a  routine of the same	name in	the FFTW library, that       determines which	parts of FFTW are callable by your program.
+|-
+|fftwf-wisdom||[https://www.freebsd.org/cgi/man.cgi?query=fftwf-wisdom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fftwf-wisdom]  is	a utility to generate FFTW wisdom files, which contain
+saved information about how to optimally	compute	 (Fourier)  transforms     of  various  sizes.  FFTW is a free library to compute discrete Fourier       transforms in one or more dimensions, for arbitrary sizes, and of  both
+real  and  complex data,	among other related operations.	 More information on FFTW can	be found at the	FFTW home page:	http://www.fftw.org
+|-
+|fh2raw||
+|-
+|fh2svg||
+|-
+|fh2text||
+|-
+|FileCheck80||
+|-
+|fill||
+|-
+|find-all-symbols80||
+|-
+|find-freecell-deal-index.py||
+|-
+|findsmb||[https://www.freebsd.org/cgi/man.cgi?query=findsmb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html findsmb] is a perl script	that prints out	several	pieces of information
+about machines on a subnet that respond to SMB name query requests.
+|-
+|fire||
+|-
+|fish||[https://www.freebsd.org/cgi/man.cgi?query=fish&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fish] is a command-line shell written mainly with	interactive use	in     mind. The full manual is	available in HTML by using the help command   from inside fish.
+|-
+|fish_indent||[https://www.freebsd.org/cgi/man.cgi?query=fish_indent&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fish_indent] is used to indent a piece of	fish code. fish_indent reads       commands	from standard input and	outputs	them to	standard output	or a       specified file.
+|-
+|fish_key_reader||[https://www.freebsd.org/cgi/man.cgi?query=fish_key_reader&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fish_key_reader] is used to study	input received from the	terminal and
+can help	with key binds.	The program is interactive and works on     standard	input. Individual characters themselves	and their hexadecimal     values are displayed.
+|-
+|five-or-more||[https://www.freebsd.org/cgi/man.cgi?query=five-or-more&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html five-or-more]  is	the GNOME port of the once popular Windows game	called
+Colour Lines.  The game's objective is to align as  often  as  possible       five  or	more objects of	the same colour	and shape causing them to disappear.
+|-
+|fix-qdf||[https://www.freebsd.org/cgi/man.cgi?query=fix-qdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fix-qdf] - repair	PDF files in QDF form after editing
+|-
+|fixdlsrps||[https://www.freebsd.org/cgi/man.cgi?query=fixdlsrps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixdlsrps] is a perl filter which "fixes" PostScript generated from the       DviLaser/PS driver so that it works correctly with Angus	Duggan's  psutils package.
+|-
+|fixfmps||[https://www.freebsd.org/cgi/man.cgi?query=fixfmps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixfmps] - filter	to fix Framemaker documents so PSUtils work
+|-
+|fixmacps||[https://www.freebsd.org/cgi/man.cgi?query=fixmacps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixmacps] - filter to fix	Macintosh documents with saner version of md
+|-
+|fixproc||[https://www.freebsd.org/cgi/man.cgi?query=fixproc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixes a process named "proc"] by performing the specified	 action.   The
+actions	can  be	 check,	 kill,	restart, exist,	or fix.	 The action is       specified on the	command	line or	is read	from a default database, which       describes  the  default	action to take for each	process.  The database
+format and the meaning of each action are described below.
+|-
+|fixpsditps||[https://www.freebsd.org/cgi/man.cgi?query=fixpsditps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixpsditps]  is a	perl filter which "fixes" PostScript from Transcript's
+psdit program so	that it	works correctly	with  Angus  Duggan's  psutils      package.
+|-
+|fixpspps||[https://www.freebsd.org/cgi/man.cgi?query=fixpspps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixpspps]	- filter to fix	PSPrint	PostScript so PSUtils work
+|-
+|fixscribeps||[https://www.freebsd.org/cgi/man.cgi?query=fixscribeps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixscribeps] - filter to fix Scribe documents so PSUtils work
+|-
+|fixtpps||[https://www.freebsd.org/cgi/man.cgi?query=fixtpps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixtpps] - filter	to fix Tpscript	documents to work with PSUtils
+|-
+|fixwfwps||[https://www.freebsd.org/cgi/man.cgi?query=fixwfwps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixwfwps] is  a perl filter which "fixes" PostScript from Word for Windows so that it works correctly with Angus Duggan's psutils package.
+|-
+|fixwpps||[https://www.freebsd.org/cgi/man.cgi?query=fixwpps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fixwpps] - filter	to fix WP documents so PSUtils work
+|-
+|fixwwps||[https://www.freebsd.org/cgi/man.cgi?query=fixwwps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fixwwps] is a perl filter	which "fixes" PostScript from Windows Write so
+that it works correctly with Angus Duggan's psutils package.
+|-
+|flac||[https://www.freebsd.org/cgi/man.cgi?query=flac&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html flac] is a command-line tool for encoding, decoding, testing and analyzing FLAC	streams.
+|-
+|flat-clip||
+|-
+|fmfconv||[https://www.freebsd.org/cgi/man.cgi?query=fmfconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fmfconv] -- Fuse Movie File converter
+|-
+|fogcoord||
+|-
+|folks-import||
+|-
+|folks-inspect||
+|-
+|foomatic-combo-xml||The  [https://www.freebsd.org/cgi/man.cgi?query=foomatic-combo-xml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Foomatic  acceleration  engine] written in C	(by Till), it computes        printer/driver combo XML	files and the printer overview XML file.
+|-
+|foomatic-compiledb||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-compiledb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-compiledb] - Compile the	Foomatic printer/driver	database
+|-
+|foomatic-configure||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-configure&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-configure]  -  the  main	 configuration program of the foomatic printing	system.
+|-
+|foomatic-perl-data||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-perl-data&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-perl-data] - generate Perl data structures from XML
+|-
+|foomatic-ppd-options||The [https://www.freebsd.org/cgi/man.cgi?query=foomatic-ppd-options&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-ppd-options] program	reads the specified PPD	files or stdin        and decodes the PPD file	to produce a list of options.  This is	really       just a text based version of other print	configuration tools.
+|-
+|foomatic-ppd-to-xml||
+|-
+|foomatic-ppdfile||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-ppdfile&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-ppdfile] - Generate a PPD file for a given printer/driver combo
+|-
+|foomatic-printjob||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-printjob&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-printjob]  - manage printer jobs	in a spooler-independent fashion
+|-
+|foomatic-searchprinter||
+|-
+|four-in-a-row||[https://www.freebsd.org/cgi/man.cgi?query=four-in-a-row&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Four-in-a-Row] - four-in-a-row game for GNOME; The object of the game is to build a line of four of your marbles while     trying to stop your opponent (human or computer)	building a line	of his
+or her own. A line can be horizontal, vertical or diagonal.
+|-
+|fplight||
+|-
+|fragcoord||
+|-
+|freecell-solver-fc-pro-range-solve||
+|-
+|freecell-solver-multi-thread-solve||
+|-
+|freecell-solver-range-parallel-solve||
+|-
+|freetype-config||[https://www.freebsd.org/cgi/man.cgi?query=freetype-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html freetype-config] - Get information about a libfreetype installation
+|-
+|fribidi||
+|-
+|fribidi-config||
+|-
+|fs-tri||
+|-
+|fsfs-access-map||
+|-
+|fsfs-stats||
+|-
+|fslight||
+|-
+|fsraytrace||
+|-
+|funzip||[https://www.freebsd.org/cgi/man.cgi?query=funzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html funzip] -	filter for extracting from a ZIP archive in a pipe
+|-
+|fuse||[https://www.freebsd.org/cgi/man.cgi?query=fuse&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Fuse]  is	 a  Sinclair  ZX Spectrum emulator. It supports	several	models        (including the 128), with quite faithful	emulation of the  display  and       sound.
+|-
+|fuse-ext2||
+|-
+|fuse-ext2.probe||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 891: / Line 1,035: @@
 !colspan="2"|
 |-
-|
+|g-ir-annotation-tool||
-|
+|-
+|g-ir-compiler||[https://www.freebsd.org/cgi/man.cgi?query=g-ir-compiler&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html g-ir-compiler]  converts one or more GIR files into one or more typelib.
+The output will be written to standard output unless  the  --output  is      specified.
+|-
+|g-ir-generate||[https://www.freebsd.org/cgi/man.cgi?query=g-ir-generate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html g-ir-generate]  is an GIR	generator, using the repository	API. It	generates GIR	files from a raw typelib or in	a  shared  library  (--shlib).       The  output  will  be written to	standard output	unless the --output is       specified.
+|-
+|g-ir-inspect||
+|-
+|g-ir-scanner||[https://www.freebsd.org/cgi/man.cgi?query=g-ir-scanner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html g-ir-scanner] is a tool which generates GIR XML files by parsing headers
+and introspecting GObject based libraries.  It is usually invoked  during the normal build step for a project and the information is saved to    disk and	later installed, so that language bindings and other  applications can use it.  Header files and source files	are passed in as arguments on	the command line.  The suffix determines  whether  a  file  be     treated	as  a source file (.c) or a header file	(.h). Currently	only C    based libraries are supported by	the scanner.
+|-
+|g++9||
+|-
+|gacutil||[https://www.freebsd.org/cgi/man.cgi?query=gacutil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gacutil]	is  a  tool used by developers to install versioned assemblies
+into the	system Global Assembly Cache (GAC) to become part of  the  assemblies	that are available for all applications	at runtime.
+|-
+|gacutil2||
+|-
+|gamma||[https://www.freebsd.org/cgi/man.cgi?query=gamma&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gamma()], gammaf(),	gamma_r(), and gammaf_r() are deprecated aliases for lgamma(), lgammaf(), lgamma_r(), and lgammaf_r(), respectively.
+|-
+|gamma4scanimage||The  tool  [https://www.freebsd.org/cgi/man.cgi?query=gamma4scanimage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gamma4scanimage] creates a gamma table	in the format expected      by scanimage. You can define a gamma, a shadow and a  highlight	value.       You also	can specify the	size (maxin) and maximum output	value (maxout)       of the gamma table.
+|-
+|gapi2-codegen||
+|-
+|gapi2-fixup||
+|-
+|gapi2-parser||
+|-
+|gapplication||[https://www.freebsd.org/cgi/man.cgi?query=gapplication&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gapplication] - D-Bus application	launcher
+|-
+|[[GBI|gbi]]||GBI stands for Graphical BSD installer.
+|-
+|gc||[https://www.freebsd.org/cgi/man.cgi?query=gc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gc]  is  a graph analogue	to wc in that it prints	to standard output the    number of nodes,	edges, connected components or clusters	 contained  in     the  input  files.  It also prints a total count	for all	graphs if more      than one	graph is given.
+|-
+|gcc9||
+|-
+|gcc-ar9||
+|-
+|gcc-nm9||
+|-
+|gcc-ranlib9||
+|-
+|gcm-calibrate||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
+|-
+|gcm-import||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
+|-
+|gcm-inspect||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
+|-
+|gcm-picker||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
+|-
+|gcm-viewer||[https://www.freebsd.org/cgi/man.cgi?query=gcm-calibrate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gcm-import] - GNOME Color	Manager	Calibrator Tool
+|-
+|gconf-merge-tree||
+|-
+|gconfsharp2-schemagen||
+|-
+|gconftool-2||[https://www.freebsd.org/cgi/man.cgi?query=gconftool-2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gconftool-2] - GNOME configuration tool; Each  preference	 in  the  GConf	repository is expressed	as a key-value      pair. A GConf preference	key is an element in the GConf repository that       corresponds  to	an  application	preference.  Preference	keys typically       have simple values such as strings, integers, or	lists of  strings  and       integers.
+|-
+|gcov9||
+|-
+|gcov-dump9||
+|-
+|gcov-tool9||
+|-
+|gcr-viewer||
+|-
+|gd2copypal||
+|-
+|gd2togif||
+|-
+|gd2topng||
+|-
+|gdbm_dump||The  [https://www.freebsd.org/cgi/man.cgi?query=gdbm_dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbm_dump] utility creates a	dump of	the specified [https://www.freebsd.org/cgi/man.cgi?query=gdbm&sektion=3&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gdbm(3)] database       file.  The name for the output dump file	is supplied by the second  argument  (FILE).	 If not	specified, the output goes to the standard error.
+|-
+|gdbm_load||[https://www.freebsd.org/cgi/man.cgi?query=gdbm_load&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbm_load] - re-create a GDBM database from a dump file.
+|-
+|gdbmtool||The  [https://www.freebsd.org/cgi/man.cgi?query=gdbmtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbmtool]  utility  allows  you to view and modify an existing GDBM        database	or to create a new one.
+|-
+|gdbus||[https://www.freebsd.org/cgi/man.cgi?query=gdbus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbus] - Tool for	working	with D-Bus objects
+|-
+|gdbus-codegen||[https://www.freebsd.org/cgi/man.cgi?query=gdbus-codegen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdbus-codegen] is	used to	generate code and/or documentation for one or
+more D-Bus interfaces. The tool reads D-Bus Introspection XML[1]	files       and generates output files. The tool currently supports generating C       code (via --generate-c-code) and	Docbook	XML (via --generate-docbook).
+|-
+|gdcmpgif||
+|-
+|gdialog||
+|-
+|gdiffmk||[https://www.freebsd.org/cgi/man.cgi?query=gdiffmk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdiffmk]	compares  two groff(1),	nroff(1), or troff(1) documents, file1
+and file2, and creates an output	which  is  file2  with	added  `margin       character' (.mc)	commands that indicate the differences.
+|-
+|gdk-pixbuf-csource||[https://www.freebsd.org/cgi/man.cgi?query=gdk-pixbuf-csource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdk-pixbuf-csource] is a small utility that generates C code containing      images, useful for compiling images directly into programs.
+|-
+|gdk-pixbuf-pixdata||
+|-
+|gdk-pixbuf-query-loaders||[https://www.freebsd.org/cgi/man.cgi?query=gdk-pixbuf-query-loaders&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gdk-pixbuf-query-loaders] collects information about loadable modules    for gdk-pixbuf and writes it to the default cache file location,	or to       stdout.
+|-
+|gdk-pixbuf-thumbnailer||
+|-
+|gdlib-config||
+|-
+|gdparttopng||
+|-
+|gdtopng||
+|-
+|gearbox||
+|-
+|gears||[https://www.freebsd.org/cgi/man.cgi?query=gears&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gears] - draw interlocking gears,	for xscreensaver.
+|-
+|geartrain||
+|-
+|gegl||
+|-
+|gegl-imgcmp||
+|-
+|genbrk||[https://www.freebsd.org/cgi/man.cgi?query=genbrk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genbrk] reads the	break (boundary) rule source code from	rule-file  and        creates	a  break  iteration data file. Normally	this data file has the     .brk extension.
+|-
+|gencfu||[https://www.freebsd.org/cgi/man.cgi?query=gencfu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gencfu] reads confusable character definitions in	the input file,	 which  are plain text files containing confusable character definitions	in the      input format defined by Unicode UAX39 for the files confusables.txt and       confusablesWholeScript.txt.  This source	(.txt) format is also accepted      by ICU spoof detectors.	The files must be  encoded  in	utf-8  format,       with  or	without	a BOM.
+|-
+|gencnval||[https://www.freebsd.org/cgi/man.cgi?query=gencnval&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gencnval] converts the ICU aliases file converterfile  into  the	binary
+file  cnvalias.icu.  This binary	file can then be read directly by ICU,  or used by [https://www.freebsd.org/cgi/man.cgi?query=pkgdata&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports pkgdata(1)] for incorporation into a larger  archive  or  library.
+|-
+|gendict||[https://www.freebsd.org/cgi/man.cgi?query=gendict&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gendict] reads  the word	list from dictionary-file and creates a	string
+trie dictionary file. Normally this data	file has the .dict extension.
+|-
+|genmipmap||
+|-
+|genrb||[https://www.freebsd.org/cgi/man.cgi?query=genrb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genrb] converts the resource bundle source files passed on  the  commandline  to	their binary form or to	a Java source file for use with	ICU4J.       The resulting binary files have a .res extension	while resource	bundle       source  files typically have a .txt extension. Java source files	have a
+java extension and follow the ICU4J naming conventions.
+|-
+|gentest||[https://www.freebsd.org/cgi/man.cgi?query=gentest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gentest] - Run random generic SMB	operations against two SMB servers and
+show the	differences in behavior
+|-
+|gentrigrams||
+|-
+|genxs||[https://www.freebsd.org/cgi/man.cgi?query=genxs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genxs]  is  a  tool  for generating custom XML serialization writers and readers for classes.
+|-
+|geom-outlining-130||
+|-
+|geom-outlining-150||
+|-
+|geom-sprites||
+|-
+|geom-stipple-lines||
+|-
+|geom-wide-lines||
+|-
+|getafm||[https://www.freebsd.org/cgi/man.cgi?query=getafm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Getafm]  generates a PostScript file which prints	an AFM file for	a font        to the printer's	output channel.	The output of getafm should be sent to       a printer, or to	GhostScript.
+|-
+|getopt||The [https://www.freebsd.org/cgi/man.cgi?query=getopt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html getopt] utility	is used	to break up options in command lines for easy
+parsing by	shell procedures, and to check for legal options.
+|-
+|gettext||The  [https://www.freebsd.org/cgi/man.cgi?query=gettext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gettext]  program  translates  a  natural language message into the
+user's language,	by looking up the translation in a message catalog.
+|-
+|gettext.sh||
+|-
+|gettextize||[https://www.freebsd.org/cgi/man.cgi?query=gettextize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gettextize] - install or upgrade gettext infrastructure
+|-
+|gfortran9||
+|-
+|gif2rgb||[https://www.freebsd.org/cgi/man.cgi?query=gif2rgb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gif2rgb] - convert images	saved as GIF to	24-bit RGB triplets
+|-
+|gif2webp||[https://www.freebsd.org/cgi/man.cgi?query=gif2webp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gif2webp] - Convert a GIF	image to WebP
+|-
+|gifbuild||[https://www.freebsd.org/cgi/man.cgi?query=gifbuild&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gifbuild] - dump GIF data	in a textual format, or	undump it to a GIF
+|-
+|gifclrmp||[https://www.freebsd.org/cgi/man.cgi?query=gifclrmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gifclrmp] - extract colormaps from GIF images
+|-
+|giffix||[https://www.freebsd.org/cgi/man.cgi?query=giffix&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html giffix] -	attempt	to fix up broken GIFs
+|-
+|giftext||[https://www.freebsd.org/cgi/man.cgi?query=giftext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html giftext] - dump GIF pixels and metadata as text
+|-
+|giftogd2||
+|-
+|giftool||giftool - GIF transformation tool
+|-
+|gimp-2.10||[https://www.freebsd.org/cgi/man.cgi?query=gimp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gimp] - an image manipulation and	paint program.
+|-
+|gimp-test-clipboard-2.0||
+|-
+|gimptool-2.0||
+|-
+|gio||[https://www.freebsd.org/cgi/man.cgi?query=gio&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gio] - To configure a project to use Giovanni simply put a `.giovanni.conf`        file in the root	directory of your project and run `gio deploy`.
+|-
+|gio-querymodules||[https://www.freebsd.org/cgi/man.cgi?query=gio-querymodules&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gio-querymodules] creates	a giomodule.cache file in the listed       directories. This file lists the	implemented extension points for each       module that has been found. It is used by GIO at	runtime	to avoid       opening all modules just	to find	out which extension points they	are       implementing.
+|-
+|git||[https://www.freebsd.org/cgi/man.cgi?query=git&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git] - the stupid	content	tracker; Git is a	fast, scalable,	distributed revision control system with an      unusually rich command set that provides	both high-level	operations and       full access to internals.
+See [https://www.freebsd.org/cgi/man.cgi?query=gittutorial&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gittutorial(7)] to get started, then see [https://www.freebsd.org/cgi/man.cgi?query=giteveryday&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports giteveryday(7)] for a	useful       minimum set of commands.	The Git	User's Manual[1] has a more in-depth       introduction.
+After you mastered the basic concepts, you can come back	to this	page       to learn	what commands Git offers. You can learn	more about individual       Git commands with "git help command". [https://www.freebsd.org/cgi/man.cgi?query=gitcli&sektion=7&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gitcli(7)] manual page gives you
+an overview of the command-line command syntax.        A formatted and hyperlinked copy	of the latest Git documentation	can be       viewed at https://git.github.io/htmldocs/git.html.
+|-
+|git-cvsserver||[https://www.freebsd.org/cgi/man.cgi?query=git-cvsserver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-cvsserver] - A CVS server emulator for Git; This application	is a CVS emulation layer for Git.
+It is highly functional.	However, not all methods are implemented, and       for those methods that are implemented, not all switches	are       implemented.
+|-
+|git-p4.py||
+|-
+|git-receive-pack||[https://www.freebsd.org/cgi/man.cgi?query=git-receive-pack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-receive-pack] - Receive what is pushed into the repository
+|-
+|git-shell||[https://www.freebsd.org/cgi/man.cgi?query=git-shell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-shell] - Restricted login shell for Git-only SSH access
+|-
+|git-upload-archive||[https://www.freebsd.org/cgi/man.cgi?query=git-upload-archive&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-upload-archive] - Send archive back to git-archive
+|-
+|git-upload-pack||[https://www.freebsd.org/cgi/man.cgi?query=git-upload-pack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html git-upload-pack] - Send objects packed back to git-fetch-pack
+|-
+|gjs-console||
+|-
+|glewinfo||
+|-
+|glib-compile-resources||[https://www.freebsd.org/cgi/man.cgi?query=glib-compile-resources&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-compile-resources] reads the	resource description from FILE and the   files that it references	and creates a binary resource bundle that is       suitable	for use	with the GResource API.	The resulting bundle is	then       written out as-is, or as	C source for linking into an application.
+|-
+|glib-compile-schemas||[https://www.freebsd.org/cgi/man.cgi?query=glib-compile-schemas&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-compile-schemas] compiles all the GSettings XML schema files	in        DIRECTORY into a	binary file with the name gschemas.compiled that can       be used by GSettings. The XML schema files must have the	filename       extension .gschema.xml. For a detailed description of the XML file       format, see the GSettings documentation.
+|-
+|glib-genmarshal||[https://www.freebsd.org/cgi/man.cgi?query=glib-genmarshal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-genmarshal] is a small utility that generates C code	marshallers       for callback functions of the GClosure mechanism	in the GObject       sublibrary of GLib. The marshaller functions have a standard signature,       they get	passed in the invoking closure,	an array of value structures       holding the callback function parameters	and a value structure for the       return value of the callback. The marshaller is then responsible	to       call the	respective C code function of the closure with all the       parameters on the stack and to collect its return value.
+|-
+|glib-gettextize||[https://www.freebsd.org/cgi/man.cgi?query=glib-gettextize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-gettextize] helps to	prepare	a source package for being       internationalized through gettext. It is	a variant of the gettextize       that ships with gettext.
+|-
+|glib-mkenums||[https://www.freebsd.org/cgi/man.cgi?query=glib-mkenums&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glib-mkenums] is a small perl-script utility that	parses C code to       extract enum definitions	and produces enum descriptions based on	text       templates specified by the user.	Most frequently	this script is used to       produce C code that contains enum values	as strings so programs can       provide value name strings for introspection.
+|-
+|glilypond||[https://www.freebsd.org/cgi/man.cgi?query=glilypond&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html glilypond] -- integrate lilypond parts into groff
+|-
+|glinfo||
+|-
+|gloss||
+|-
+|glsl-compile-time||
+|-
+|glslstateschange||
+|-
+|glsync||
+|-
+|gltestperf||
+|-
+|glthreads||
+|-
+|glxcontexts||
+|-
+|glxdemo||
+|-
+|glxgears||
+|-
+|glxgears_fbconfig||
+|-
+|glxgears_pixmap||
+|-
+|glxheads||
+|-
+|glxinfo||
+|-
+|glxpbdemo||
+|-
+|glxpixmap||
+|-
+|glxsnoop||
+|-
+|glxswapcontrol||
+|-
+|gml2gv||[https://www.freebsd.org/cgi/man.cgi?query=gml2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gml2gv]  converts	 a graph specified in the GML format to	a graph	in the
+GV (formerly DOT) format.  gv2gml converts a graph specified in the  GV       format to a graph in the	GML format.
+|-
+|gnome-2048||
+|-
+|gnome-calendar||GNOME Calendar is a simple and beautiful calendar application designed to perfectly fit the GNOME desktop. By reusing the components which the GNOME desktop is build on, Calendar nicely integrates with the
+GNOME ecosystem.
+|-
+|gnome-chess||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-clocks||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-contacts||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-control-center||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-dictionary||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-doc-prepare||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-doc-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-font-viewer||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-keyring-3||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-keyring-daemon||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-klotski||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-mahjongg||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-mines||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-mount||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-nibbles||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-open||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-photos||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-robots||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-screenshot||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-search-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-shell||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-shell-extension-prefs||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-shell-extension-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-shell-perf-tool||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-sudoku||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-system-log||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-system-monitor||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-taquin||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-tetravex||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-thumbnail-font||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnome-todo||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnomevfs-cat||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-copy||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-df||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-info||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-ls||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-mkdir||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-monitor||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-mv||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnomevfs-rm||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all Gstreamer gnomevfs plugin]
+|-
+|gnote||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnuchess||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnuchessu||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnuchessx||[https://www.freebsd.org/cgi/ports.cgi?query=gnome&stype=all see ports collection]
+|-
+|gnutls-cli||[https://www.freebsd.org/cgi/man.cgi?query=gnutls-cli&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gnutls-cli] - GnuTLS client;  Simple client program to	set up a TLS connection	 to  some  other  com   puter.  It sets up a TLS	connection and forwards	data from the standard
+input to	the secured socket and vice versa.
+|-
+|gnutls-cli-debug||[https://www.freebsd.org/cgi/man.cgi?query=gnutls-cli-debug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gnutls-cli-debug] - GnuTLS debug client
+|-
+|gnutls-serv||[https://www.freebsd.org/cgi/man.cgi?query=gnutls-serv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gnutls-serv] - GnuTLS server
+|-
+|gobject-query||[https://www.freebsd.org/cgi/man.cgi?query=gobject-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gobject-query] is	a small	utility	that draws a tree of types.
+gobject-query takes a mandatory argument	that specifies whether it       should iterate over the fundamental types or print a type tree.
+|-
+|gpatch||[https://www.freebsd.org/cgi/man.cgi?query=gpatch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html patch] takes a patch file	patchfile containing a difference listing produced by	the diff program and applies those differences to one or  more       original	 files,	producing patched versions.  Normally the patched versions are put in	place of the originals.	 Backups can be	made; see  the    -b
+or  --backup	option.	 The names of the files	to be patched are usually taken from the patch file, but if there's  just  one  file	to  be       patched it can be specified on the command line as originalfile.
+|-
+|gperl||[https://www.freebsd.org/cgi/man.cgi?query=gperl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gperl] - groff preprocessor for Perl parts in roff files
+|-
+|gpg2||[https://www.freebsd.org/cgi/man.cgi?query=gpg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg2] - OpenPGP encryption and signing tool
+|-
+|gpg-agent||[https://www.freebsd.org/cgi/man.cgi?query=gpg-agent&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg-agent] - Secret key management for GnuPG
+|-
+|gpg-connect-agent||The  [https://www.freebsd.org/cgi/man.cgi?query=gpg-connect-agent&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg-connect-agent]  is a utility to communicate with	a running gpgagent.  It is useful to check out the commands gpg-agent	provides using       the Assuan interface.  It might also be useful for scripting simple applications.  Input is expected at stdin and out	put  gets  printed  to       stdout.
+|-
+|gpg-error||
+|-
+|gpg-error-config||[https://www.freebsd.org/cgi/man.cgi?query=gpg-error-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpg-error-config] is a tool that is used to configure to	determine  the       compiler	 and linker flags that should be used to compile and link programs that use Libgpg-error. It is also	used  internally  to  the  .m4     macros for GNU autoconf that are	included with Libgpg-error.
+|-
+|gpg-wks-server||
+|-
+|gpgconf||[https://www.freebsd.org/cgi/man.cgi?query=gpgconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgconf] - Modify	.gnupg home directories
+|-
+|gpgme-config||
+|-
+|gpgme-json||
+|-
+|gpgme-tool||
+|-
+|gpgparsemail||[https://www.freebsd.org/cgi/man.cgi?query=gpgparsemail&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgparsemail] - Parse a mail message into	an annotated format
+|-
+|gpgrt-config||
+|-
+|gpgscm||
+|-
+|gpgsm||[https://www.freebsd.org/cgi/man.cgi?query=gpgsm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgsm]  is a tool	similar	to gpg to provide digital encryption and signing services on X.509 certificates and the CMS protocol.	 It is	mainly       used  as	 a  backend for	S/MIME mail processing.	 gpgsm includes	a full       featured	certificate management and complies with all rules defined for
+the German Sphinx project.
+|-
+|gpgtar||
+|-
+|gpgv2||[https://www.freebsd.org/cgi/man.cgi?query=gpgv2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpgv2] is	an OpenPGP signature verification tool.
+|-
+|gphoto2-config||
+|-
+|gphoto2-port-config||
+|-
+|gphotofs||
+|-
+|gpinyin||[https://www.freebsd.org/cgi/man.cgi?query=gpinyin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpinyin] - Chinese European-like writing within groff
+|-
+|gprof||The [https://www.freebsd.org/cgi/man.cgi?query=gprof&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gprof] utility produces	an execution profile of	C, Pascal, or Fortran77 programs.  The effect of called routines is	incorporated in	the     profile of	each caller.
+|-
+|gr2fonttest||
+|-
+|granite-demo||
+|-
+|grap2graph||[https://www.freebsd.org/cgi/man.cgi?query=grap2graph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grap2graph] - convert a grap diagram into	a cropped bitmap image
+|-
+|graphml2gv||[https://www.freebsd.org/cgi/man.cgi?query=graphml2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html graphml2gv]  converts a graph specified in the GRAPHML format to a graph
+in the GV (formerly DOT)	format.
+|-
+|gresource||[https://www.freebsd.org/cgi/man.cgi?query=gresource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gresource] offers	a simple commandline interface to GResource. It	lets
+you list	and extract resources that have	been compiled into a resource      file or included	in an elf file (a binary or a shared library).
+|-
+|greytiff||
+|-
+|grl-inspect-0.3||[https://www.freebsd.org/cgi/man.cgi?query=grl-inspect-0.3&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grl-inspect]  is	a  tool	that prints out	information on available Grilo
+sources and metadata keys. When executed	with no	SOURCE argument,  grlinspect	will  print the	list of	all plugins and	sources. When executed   with a SOURCE, grl-inspect will print information about that source.
+|-
+|grl-launch-0.3||[https://www.freebsd.org/cgi/man.cgi?query=grl-launch-0.3&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grl-launch]  is a	tool that allows the user to run Grilo operations from
+the command line.
+|-
+|grn||[https://www.freebsd.org/cgi/man.cgi?query=grn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grn] - groff preprocessor	for gremlin files
+|-
+|grodvi||[https://www.freebsd.org/cgi/man.cgi?query=grodvi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grodvi] is a driver for groff that produces TeX dvi format.  Normally it       should  be run by groff -Tdvi.  This will run troff -Tdvi; it will also       input the macros	in /usr/share/tmac/dvi.tmac.
+|-
+|groff||[https://www.freebsd.org/cgi/man.cgi?query=groff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html groff] - front-end for the groff document	formatting system
+|-
+|groffer||The [https://www.freebsd.org/cgi/man.cgi?query=groffer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html groffer] program is the easiest way to use groff(1).	It can display       arbitrary documents written in the groff(7) language or	other  roff(7)       languages  that	are  compatible	 to  the original troff	language.  The       groffer program also includes many of the features for finding and displaying	the UNIX manual	pages (man pages), such	that it	can be used as       a replacement for a man(1) program.
+|-
+|grog||[https://www.freebsd.org/cgi/man.cgi?query=grog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grog] - guess options for	groff command
+|-
+|grolbp||[https://www.freebsd.org/cgi/man.cgi?query=grolbp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grolbp]  - groff driver for Canon	CAPSL printers (LBP-4 and LBP-8	series       laser printers)
+|-
+|grolj4||[https://www.freebsd.org/cgi/man.cgi?query=grolj4&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grolj4]  is a driver for groff that produces output in PCL5 format suitable for	an HP Laserjet 4 printer.
+|-
+|gropdf||[https://www.freebsd.org/cgi/man.cgi?query=gropdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gropdf]  translates  the	output	of  GNU	troff to PDF.
+|-
+|grops||[https://www.freebsd.org/cgi/man.cgi?query=grops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grops] translates	the output of GNU troff	to PostScript.
+|-
+|grotty||[https://www.freebsd.org/cgi/man.cgi?query=grotty&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html grotty] -	groff driver for typewriter-like devices
+|-
+|growisofs||[https://www.freebsd.org/cgi/man.cgi?query=growisofs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html growisofs] - combined mkisofs frontend/DVD recording program.
+|-
+|gs||[https://www.freebsd.org/cgi/man.cgi?query=gs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gs]  -  Ghostscript  (PostScript	and  PDF language interpreter and previewer)
+|-
+|gs-tri||
+|-
+|gsbj||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsbj] - Format and print text for	BubbleJet printer using	ghostscript
+|-
+|gsdj||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsdj] - Format and print text for	DeskJet	printer	using ghostscript
+|-
+|gsdj500||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsdj500] - Format and print text	for DeskJet 500	BubbleJet using	ghostscript
+|-
+|gsettings||[https://www.freebsd.org/cgi/man.cgi?query=gsettings&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsettings] - GSettings configuration tool
+|-
+|gsettings-data-convert||[https://www.freebsd.org/cgi/man.cgi?query=gsettings-data-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsettings-data-convert] reads values out of the users GConf database and     stores them in GSettings.
+|-
+|gsettings-schema-convert||[https://www.freebsd.org/cgi/man.cgi?query=gsettings-schema-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsettings-schema-convert] converts between GConf and GSettings schema      file formats. Note that the conversion is not expected to be fully       automated. You are expected to verify and edit the result of the       conversion.
+|-
+|gsf||[https://www.freebsd.org/cgi/man.cgi?query=gsf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsf]  is	a simple archive utility, somewhat similar to tar(1). It operates on files following one of the structured file  formats  understood       by  the	G  Structured  File  library, for example, Microsoft Excel(TM)      files.
+|-
+|gsf-office-thumbnailer||[https://www.freebsd.org/cgi/man.cgi?query=gsf-office-thumbnailer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsf-office-thumbnailer] is used internally by GNOME applications such as      nautilus	to generate thumbnails of several types	of office  application       files.  While  it  is possible to invoke	it manually, it	is usually invoked automatically by nautilus.
+|-
+|gsf-vba-dump||[https://www.freebsd.org/cgi/man.cgi?query=gsf-vba-dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsf-vba-dump] - extract Visual Basic for Applications macros Various	Microsoft  binary  data	 formats, including Excel (.xls), Word    (.doc) and PowerPoint (.ppt) can	embed macro code streams. These	 macro       streams	are in P-code (intermediate language) compiled from Visual Basic for Applications (VBA).     The gsf-vba-dump	utility	extracts these macro streams.
+|-
+|gslj||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gslj] - Format and print text for	LaserJet printer using ghostscript
+|-
+|gslp||[https://www.freebsd.org/cgi/man.cgi?query=gsbj&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gslp] - Format and print text using ghostscript
+|-
+|gsnd||[https://www.freebsd.org/cgi/man.cgi?query=gsnd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gsnd] - Run ghostscript (PostScript and PDF engine) without display
+|-
+|gsound-play||
+|-
+|gsraytrace||
+|-
+|gst-device-monitor-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-device-monitor-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-device-monitor-1.0]  is a command line tool that can be used to test       GStreamer's device monitoring functionality. By default	it  will  just       print  a	 list  of all devices found and	exit, but you can also make it       wait around for more devices by passing the --follow  option.  You  can       also pass it one	or more	filter arguments to filter the kind of devices       you are interested in.
+|-
+|gst-discoverer-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-discoverer-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-discoverer-1.0]  is  a tool that can be used to print	basic metadata        and stream information about a media file. It can be run	on  individual       files  or  whole	 directories.  It will recurse into sub-directories in       that case.
+|-
+|gst-inspect-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-inspect-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-inspect]  is	a  tool	 that  prints  out  information	 on  available
+GStreamer plugins, information about a particular plugin,  or  information  about a particular	element.  When executed	with no	PLUGIN or ELEMENT argument, gst-inspect will print a list of all  plugins  and  elements  together with a summary.	When executed with a PLUGIN or ELEMENT       argument, gst-inspect will print	information about that plug-in or element.
+|-
+|gst-launch-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-launch-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-launch] is a tool that builds	and runs basic GStreamer pipelines.
+|-
+|gst-play-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-play-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-play-1.0]  is	 a  command  line  tool	that can be used to test basic
+playback	using the playbin element. You can pass	it  individual	files,      URIs  or	 whole directories (in which case it will recurse into sub-di-rectories as well).
+|-
+|gst-stats-1.0||
+|-
+|gst-typefind-1.0||[https://www.freebsd.org/cgi/man.cgi?query=gst-typefind-1.0&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gst-typefind]  uses  the	GStreamer type finding system to determine the    relevant	GStreamer plugin to parse or decode file, and the  corresponding media type.
+|-
+|gtar||[https://www.freebsd.org/cgi/man.cgi?query=gtar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tar] - an	archiving utility
+|-
+|gtester||[https://www.freebsd.org/cgi/man.cgi?query=gtester&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gtester] is a utility to run unit	tests that have	been written using the
+GLib test framework.
+|-
+|gtester-report||[https://www.freebsd.org/cgi/man.cgi?query=gtester-report&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gtester-report] is a script which	converts the XML output	generated by
+gtester into HTML.
+|-
+|gtf||[https://www.freebsd.org/cgi/man.cgi?query=gtf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Gtf] is a	utility	for calculating	VESA GTF  modes.   Given  the  desired       horizontal  and	vertical resolutions and refresh rate (in Hz), the parameters	for a matching VESA GTF	mode are printed out.  Two output formats are	supported: mode	lines suitable for the Xorg xorg.conf(5) file,  and mode	parameters suitable for	the Linux fbset(8) utility.
+|-
+|gtk3-demo||
+|-
+|gtk3-demo-application||
+|-
+|gtk3-icon-browser||
+|-
+|gtk3-widget-factory||
+|-
+|gtk-builder-convert||
+|-
+|gtk-builder-tool||
+|-
+|gtk-demo||
+|-
+|gtk-encode-symbolic-svg||
+|-
+|gtk-launch||
+|-
+|gtk-query-immodules-2.0||
+|-
+|gtk-query-immodules-3.0||
+|-
+|gtk-query-settings||
+|-
+|gtk-update-icon-cache||
+|-
+|gtkhtml3-editor-test||
+|-
+|gucharmap||
+|-
+|guild||
+|-
+|guile||GNU  [https://www.freebsd.org/cgi/man.cgi?query=guile&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Guile] is an	implementation of the Scheme programming language.  It       extends the R5RS	and R6RS language standards, providing additional features necessary for real-world use.
+|-
+|guile-config||
+|-
+|guile-snarf||
+|-
+|gupnp-binding-tool-1.2||
+|-
+|gv2gml||[https://www.freebsd.org/cgi/man.cgi?query=gv2gml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gml2gv]  converts	 a graph specified in the GML format to	a graph	in the    GV (formerly DOT) format.  gv2gml converts a graph specified in the  GV      format to a graph in the	GML format.
+|-
+|gvcolor||[https://www.freebsd.org/cgi/man.cgi?query=gvcolor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvcolor] is  a  filter  that sets node colors from initial seed values.        Colors flow along edges from tail to head, and  are  averaged  (as  HSB      vectors)	 at nodes.  The	graph must already have	been processed by dot.       Appropriate choice of initial colors yields drawings in which node colors  help  to  emphasize	logical	relationships between nodes, even when       they are	spread far apart in the	layout.
+|-
+|gvfs-cat||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-cat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-cat]	concatenates the given files and prints	them to	the standard
+output.
+|-
+|gvfs-copy||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-copy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-copy] copies	a file from SOURCE to DEST, or multiple	SOURCEs	to       DIRECTORY.    gvfs-copy is similar to the traditional cp utility, but using gvfs       locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.
+|-
+|gvfs-info||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-info] shows information about the given locations.      gvfs-info is similar to the traditional ls utility, but using gvfs       locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.
+|-
+|gvfs-less||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-less&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-less] executes less on the output of	gvfs-cat.
+gvfs-less works just like the traditional less utility, but using gvfs    locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.
+|-
+|gvfs-ls||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-ls&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-ls] lists information about the given locations. If no location is
+given, it defaults to the current directory.    gvfs-ls is similar to the traditional ls	utility, but using gvfs      locations instead of local files: for example you can use something       like smb://server/resource/file.txt as location.
+|-
+|gvfs-mime||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-mime&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-mime] can query information about applications that are registered
+to handle a mime-type, or set the default handler for a mime-type.
+|-
+|gvfs-mkdir||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-mkdir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-mkdir] creates directories.
+|-
+|gvfs-monitor-dir||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-monitor-dir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-monitor-dir] - Monitor directories for changes; As long as gvfs-monitor-dir is running, it will print information about        file creation, deletion,	file content and attribute changes and mount       and unmount operations inside the specified directories.
+|-
+|gvfs-monitor-file||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-monitor-file&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-monitor-file] - Monitor files for changes
+|-
+|gvfs-mount||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-mount&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-mount] - Mounts the locations
+|-
+|gvfs-move||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-move&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-move] - Copy	files
+|-
+|gvfs-open||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-open&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-open] opens files with the default application that is registered        to handle files of this type.
+|-
+|gvfs-rename||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-rename&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-rename] is similar to the traditional rename	utility, but using
+gvfs locations instead of local files: for example you can use     something like smb://server/resource/file.txt as	location.
+|-
+|gvfs-rm||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-rm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-rm] - Delete	files
+|-
+|gvfs-save||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-save&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-save] - Save	standard input
+|-
+|gvfs-set-attribute||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-set-attribute&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-set-attribute] - Set	file attributes
+|-
+|gvfs-trash||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-trash&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-trash] - Move files or directories to the trash
+|-
+|gvfs-tree||[https://www.freebsd.org/cgi/man.cgi?query=gvfs-tree&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvfs-tree] - List	contents of directories	in a tree-like format
+|-
+|gvgen||[https://www.freebsd.org/cgi/man.cgi?query=gvgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvgen] - generate	graphs
+|-
+|gvimtutor||
+|-
+|gvmap||[https://www.freebsd.org/cgi/man.cgi?query=gvmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvmap] takes as input a graph in DOT format,  finds  node	 clusters  and       produces	a rendering of the graph as a geographic-style map, with clusters highlighted	as countries, in xdot format.
+|-
+|gvmap.sh||[https://www.freebsd.org/cgi/man.cgi?query=gvmap.sh&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvmap.sh] - pipeline for running gvmap
+|-
+|gvpack||[https://www.freebsd.org/cgi/man.cgi?query=gvpack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvpack] reads in a stream	of graphs, combines the	graphs into  a	single  layout,	and  produces a	single graph serving as	the union of the input       graphs. The input graphs	must be	in dot format, and must	have all  necessary  layout  information. Acceptable input is	produced by applying a       Graphviz	layout program,	such as	dot or neato, with no -T flag.
+|-
+|gvpr||[https://www.freebsd.org/cgi/man.cgi?query=gvpr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gvpr] (previously	known as gpr) is a graph  stream  editor  inspired  by     awk.  It	copies input graphs to its output, possibly transforming their       structure and attributes, creating new graphs,  or  printing  arbitrary       information.   The  graph  model	 is that provided by libcgraph(3).  In       particular, gvpr	reads and writes graphs	using the dot language.
+|-
+|gxl2gv||[https://www.freebsd.org/cgi/man.cgi?query=gxl2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gxl2gv]  converts	 between  graphs represented in	GXL and	in the GV language. Unless a conversion type is specified using a flag, gxl2gv  will   deduce  the  type  of  conversion  from the suffix of the input file, a      ".gv" suffix causing a conversion from GV to GXL, and a	".gxl"	suffix       causing	a  conversion from GXL to GV.  If no suffix is available, e.g.       when the	input is from a	pipe, and no flags are used  then  gxl2gv  assumes  the  type	 of  the  input	 file from its executable name so that      gxl2gv converts from GXL	to GV, and gv2gxl converts from	GV to GXL.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 904: / Line 1,688: @@
 !colspan="2"|
 |-
-|
+|h2ph||[https://www.freebsd.org/cgi/man.cgi?query=h2ph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html h2ph] - convert .h C header files	to .ph Perl header files
-|
+|-
+|h2xs||[https://www.freebsd.org/cgi/man.cgi?query=h2xs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html h2xs] - convert .h C header files	to Perl	extensions
+|-
+|hal-device||
+|-
+|hal-disable-polling||[https://www.freebsd.org/cgi/man.cgi?query=hal-disable-polling&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-disable-polling]  can	 be used to to disable and enable media	detection on drives with removable storage. For more information about  both      the  big	 picture  and  specific	 HAL properties, refer to the HAL spec       which can be found in  /usr/local/share/doc/hal/spec/hal-spec.html  depending on the distribution.
+|-
+|hal-find-by-capability||[https://www.freebsd.org/cgi/man.cgi?query=hal-find-by-capability&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-get-capability]  finds  device  object in the	HAL device database by    looking at device capabilities. For more	information about both the big       picture and specific HAL	properties, refer to the HAL spec which	can be       found in	/usr/local/share/doc/hal/spec/hal-spec.html depending  on  the       distribution.
+|-
+|hal-find-by-property||[https://www.freebsd.org/cgi/man.cgi?query=hal-find-by-property&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-get-property] finds	device	object	in  the	HAL device database by        looking at device properties. For more information about	both  the  big       picture and specific HAL	properties, refer to the HAL spec which	can be       found in	/usr/local/share/doc/hal/spec/hal-spec.html depending  on  the       distribution.
+|-
+|hal-get-property||[https://www.freebsd.org/cgi/man.cgi?query=hal-get-property&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-get-property] retrieves  a property from a device object in the HAL        device database.	For more information about both	the  big  picture  and      specific	 HAL  properties,  refer to the	HAL spec which can be found in       /usr/local/share/doc/hal/spec/hal-spec.html depending on	the  distribution.
+|-
+|hal-is-caller-locked-out||[https://www.freebsd.org/cgi/man.cgi?query=hal-is-caller-locked-out&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-is-caller-locked-out]	 determines if a specific caller is locked out       of a specific D-Bus interface on	a specific device. For	more  information  about  both the big picture and specific HAL properties, refer to    the HAL spec which can be found	in  /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
+|-
+|hal-is-caller-privileged||[https://www.freebsd.org/cgi/man.cgi?query=hal-is-caller-privileged&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-is-caller-privileged] determines if a specific caller is privileged     for a given PolicyKit action on	given  device.	For  more  information       about  both  the	big picture, HAL and PolicyKit , refer to the HAL spec       (which can be found in /usr/local/share/doc/hal/spec/hal-spec.html  depending on the distribution) and	also the PolicyKit documentation.
+|-
+|hal-lock||[https://www.freebsd.org/cgi/man.cgi?query=hal-lock&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-lock] can be used to acquire a lock on a given interface either on a
+given device or globally. For more information about both the big  picture and	the semantics of HAL locks, refer to the HAL spec which	can be    found in	/usr/local/share/doc/hal/spec/hal-spec.html depending  on  the       distribution.
+|-
+|hal-set-property||[https://www.freebsd.org/cgi/man.cgi?query=hal-set-property&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hal-set-property] sets  a property on a device object in	the HAL	device        database. For more information about both the big picture and  specific      HAL  properties,	 refer	to the HAL spec	which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
+|-
+|hb-ot-shape-closure||
+|-
+|hb-shape||
+|-
+|hb-subset||
+|-
+|hitori||
+|-
+|hmac256||This  is	 a  standalone	[https://www.freebsd.org/cgi/man.cgi?query=hmac256&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html HMAC-SHA-256] implementation used to compute an        HMAC-SHA-256 message authentication code.  The tool has originally been       developed  as  a	second implementation for Libgcrypt to allow comparing       against the primary implementation and to be used for internal  consistency  checks.	It  should  not	 be used for sensitive data because no       mechanisms to clear the stack etc are used.
+|-
+|hmaptool80||
+|-
+|hpftodit||[https://www.freebsd.org/cgi/man.cgi?query=hpftodit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hpftodit] creates	a font file for	 use  with  a  Hewlett-Packard	Laser-
+Jet 4-series (or	newer) printer with groff -Tlj4, using data from an HP     tagged font metric (TFM)	file.  tfm_file	is the name of	the  TFM  file       for  the	 font;	Intellifont  and TrueType TFM files are	supported, but       symbol set TFM files are	not.  map_file is  a  file  giving  the	 groff       names  for  characters  in  the font;
+|-
+|httpcfg||[https://www.freebsd.org/cgi/man.cgi?query=httpcfg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html httpcfg] - Mono Certificate Management for HttpListener; This  tool  is used to manage the certificates used by the HttpListener       embeddable server class when the	HttpListener is	configured as an HTTPS       server instead of an HTTP server.
+|-
+|hunspell||[https://www.freebsd.org/cgi/man.cgi?query=hunspell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hunspell]	- spell	checker, stemmer and morphological analyzer
+|-
+|hunzip||[https://www.freebsd.org/cgi/man.cgi?query=hunzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  hunzip] -	decompress and decrypt hzip files to the standard output
+|-
+|hzip||[https://www.freebsd.org/cgi/man.cgi?query=hzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hunzip] is a small utility for text file compression and encryption, especially	for sorted dictionaries. "hunspell filename" creates the  compressed file "filename.hz" without removing the original	file.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 917: / Line 1,751: @@
 !colspan="2"|
 |-
-|
+|iagno||[https://www.freebsd.org/cgi/man.cgi?query=iagno&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Iagno] is	a two-player strategy game similar to Go.  The board is	8 by 8        with tiles that are black on one	side and white on the other side.  The       object  of  Iagno  is to	flip as	 many of your opponent's tiles to your       color as	possible without your opponent flipping	your tiles.   This  is       done  by	 trapping  your	opponent's tiles between two tiles of your own       color.
-|
+|-
+|ibus||[https://www.freebsd.org/cgi/man.cgi?query=ibus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ibus]  is	 a command line	utility	which can restart or exit ibus-daemon,        get or set the current ibus engine or list the ibus engines.       Homepage: https://github.com/ibus/ibus/wiki
+|-
+|ibus-daemon||[https://www.freebsd.org/cgi/man.cgi?query=ibus-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ibus-daemon] is a	daemon program for ibus	and it is also a start up program for	users to activate ibus daemon, engines and panel.
+|-
+|ibus-setup||[https://www.freebsd.org/cgi/man.cgi?query=ibus-setup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ibus-setup] - configuration program for ibus
+|-
+|iccdump||
+|-
+|iccgamut||
+|-
+|icclu||
+|-
+|iconv||The [https://www.freebsd.org/cgi/man.cgi?query=iconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html iconv] utility converts	the codeset of file (or	from standard input if
+no	file is	specified) from	codeset	from_name to codeset to_name and outputs the converted	text on	standard output.
+|-
+|icu-config||[https://www.freebsd.org/cgi/man.cgi?query=icu-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html icu-config] simplifies the task of building and linking against  ICU  as        compared	to manually configuring	user makefiles or equivalent.  Because       icu-config is an	executable script, it also solves the problem  of  locating  the  ICU	 libraries and headers,	by allowing the	system PATH to
+locate it.
+|-
+|icuinfo||
+|-
+|identity||
+|-
+|idevice_id||[https://www.freebsd.org/cgi/man.cgi?query=idevice_id&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevice_id] - Prints device name or a list of attached devices.
+|-
+|idevicebackup||[https://www.freebsd.org/cgi/man.cgi?query=idevicebackup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicebackup] - Create or restore backup	for devices.
+|-
+|idevicebackup2||
+|-
+|idevicecrashreport||[https://www.freebsd.org/cgi/man.cgi?query=idevicecrashreport&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicecrashreport] - Retrieve crash reports from	a device.
+|-
+|idevicedate||[https://www.freebsd.org/cgi/man.cgi?query=idevicedate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicedate] - Display the current date or set it	on a device.
+|-
+|idevicedebug||[https://www.freebsd.org/cgi/man.cgi?query=idevicedebug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicedebug] - Interact with the	debugserver service of a device.
+|-
+|idevicedebugserverproxy||
+|-
+|idevicediagnostics||[https://www.freebsd.org/cgi/man.cgi?query=idevicediagnostics&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicediagnostics]  -  Interact with the	diagnostics interface of a device.
+|-
+|ideviceenterrecovery||[https://www.freebsd.org/cgi/man.cgi?query=ideviceenterrecovery&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceenterrecovery] - Make a device enter recovery mode.
+|-
+|ideviceimagemounter||[https://www.freebsd.org/cgi/man.cgi?query=ideviceimagemounter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceimagemounter] - Mount disk	images on the device.
+|-
+|ideviceinfo||[https://www.freebsd.org/cgi/man.cgi?query=ideviceinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceinfo] - Show information about the	first connected	device.
+|-
+|idevicename||[https://www.freebsd.org/cgi/man.cgi?query=idevicename&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicename] - Display the device	name or	set it to NAME if specified.
+|-
+|idevicenotificationproxy||[https://www.freebsd.org/cgi/man.cgi?query=idevicenotificationproxy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicenotificationproxy] - Post or observe notifications	on a device.
+|-
+|idevicepair||[https://www.freebsd.org/cgi/man.cgi?query=idevicepair&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicepair] - Manage host pairings with devices and usbmuxd.
+|-
+|ideviceprovision||[https://www.freebsd.org/cgi/man.cgi?query=ideviceprovision&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ideviceprovision] - Manage provisioning profiles on a device.
+|-
+|idevicescreenshot||[https://www.freebsd.org/cgi/man.cgi?query=idevicescreenshot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicescreenshot] - Gets	a screenshot from the connected	device.
+|-
+|idevicesyslog||[https://www.freebsd.org/cgi/man.cgi?query=idevicesyslog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idevicesyslog] - Relay syslog of a connected device.
+|-
+|idle2.7||
+|-
+|idle3.6||
+|-
+|idle3.7||
+|-
+|idn||[https://www.freebsd.org/cgi/man.cgi?query=idn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html idn] - Internationalized Domain Names command line tool; Internationalized Domain	Name (IDN) convert STRINGS, or standard	input.       Command line interface to the internationalized domain name library.
+All strings are expected	to be encoded in the preferred charset used by       your locale.  Use `--debug' to find out what this charset is.  You  can       override	the charset used by setting environment	variable CHARSET.
+To  process a string that starts	with `-', for example `-foo', use `--'       to signal the end of parameters,	as in `idn --quiet -a -- -foo'.
+Mandatory arguments to long options are	mandatory  for	short  options       too.
+|-
+|idn2||
+|-
+|ifuse||[https://www.freebsd.org/cgi/man.cgi?query=ifuse&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ifuse] - Mount directories of an iOS device locally using	fuse. Mount  directories  of an iOS device locally using fuse.	By default the        media directory is mounted, options allow to  also  mount  the  sandbox       container  of  an  app,	an  app's  documents  folder  or even the root       filesystem on jailbroken	devices.
+|-
+|ikdasm||
+|-
+|ilasm||[https://www.freebsd.org/cgi/man.cgi?query=ilasm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ilasm] is	the Mono ILAsm assembler.  You can pass	one or more options to        drive the compiler, and a set of	source files.
+|-
+|illumread||
+|-
+|img2webp||
+|-
+|imgcmp||The  [https://www.freebsd.org/cgi/man.cgi?query=imgcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html imgcmp]  command  compares two images of the	same geometry with respect to	a given	metric.	 Please	use the	--help command line switch and       the JasPer Software Reference Manual for	more information.
+|-
+|imginfo||The  [https://www.freebsd.org/cgi/man.cgi?query=imginfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html imginfo]  command  displays information about an image.  Please use        the --help command line switch and the JasPer Software Reference	Manual       for more	information.
+|-
+|includeres||[https://www.freebsd.org/cgi/man.cgi?query=includeres&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Includeres]  includes  resources (fonts, procsets, patterns, files, etc)       in place	of %%IncludeResource comments in a  PostScript	document.  The       resources  are searched for in the current directory and	the system default directory under the resource name,	and with an appropriate	extension.
+|-
+|indexinfo||
+|-
+|indxbib||[https://www.freebsd.org/cgi/man.cgi?query=indxbib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html indxbib] - make inverted index for bibliographic databases
+|-
+|innochecksum||[https://www.freebsd.org/cgi/man.cgi?query=innochecksum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html innochecksum] prints checksums for InnoDB	files. This tool reads an        InnoDB tablespace file, calculates the checksum for each	page, compares      the calculated checksum to the stored checksum, and reports mismatches, which indicate damaged pages. It	was originally developed to speed up
+verifying the integrity of tablespace files after power outages but can       also be used after file copies. Because checksum	mismatches will	cause       InnoDB to deliberately shut down	a running server, it can be preferable
+to use this tool	rather than waiting for	a server in production usage       to encounter the	damaged	pages.
+|-
+|install-printerdriver||
+|-
+|installvst||
+|-
+|instmodsh||[https://www.freebsd.org/cgi/man.cgi?query=instmodsh&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html instmodsh] - A shell to examine installed	modules
+|-
+|invprofcheck||
+|-
+|ipers||
+|-
+|ipf-mod.pl||
+|-
+|ippfind||[https://www.freebsd.org/cgi/man.cgi?query=ippfind&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ippfind] - find internet printing	protocol printers
+|-
+|iproxy||
+|-
+|iptc||
+|-
+|irb26||
+|-
+|iso-info||[https://www.freebsd.org/cgi/man.cgi?query=iso-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html iso-info]	- shows	Information about an ISO 9660 image
+|-
+|iso-read||[https://www.freebsd.org/cgi/man.cgi?query=iso-read&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html iso-read]	- reads	portions of an ISO 9660	image
+|-
+|isodebug||[https://www.freebsd.org/cgi/man.cgi?query=isodebug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html isodebug] - print	genisoimage debug info from ISO-9660 image
+|-
+|isodump||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
+|-
+|isoinfo||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
+|-
+|isosurf||
+|-
+|isovfy||[https://www.freebsd.org/cgi/man.cgi?query=devdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html devdump,	 isoinfo,  isovfy,  isodump] - Utility programs for dumping and    verifying iso9660 images.
+|-
+|ispellaff2myspell||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 930: / Line 1,900: @@
 !colspan="2"|
 |-
-|
+|jasper||The [https://www.freebsd.org/cgi/man.cgi?query=jasper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jasper] command converts to and from JPEG-2000 files.
-|
+|-
+|javavm||The [https://www.freebsd.org/cgi/man.cgi?query=javavm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Java VM] wrapper provides a convenient system for switching between      different Java VMs.  It also provides symbolic links in /usr/local/bin to   allow the use of the Java executables without having to add the specific     Java VM executable	directories to the PATH	environment variable.
+|-
+|jbgtopbm||[https://www.freebsd.org/cgi/man.cgi?query=jbgtopbm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jbgtopbm] - JBIG1	to portable bitmap file	converter
+|-
+|jbgtopbm85||
+|-
+|jbig2dec||[https://www.freebsd.org/cgi/man.cgi?query=jbig2dec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jbig2dec]	- File format converter	specialized in JBIG2 decoding
+|-
+|jiv||The [https://www.freebsd.org/cgi/man.cgi?query=jiv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jiv] command displays	a JPEG-2000 image on an	X display. Use the arrow keys	for scrolling and < and	> for zooming.	Please use the	--help       command	line  switch and the JasPer Software Reference Manual for more       information.
+|-
+|jmtpfs||
+|-
+|jpegicc||[https://www.freebsd.org/cgi/man.cgi?query=jpegicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jpegicc] - little	cms ICC	profile	applier	for JPEG.
+|-
+|jpegtran||[https://www.freebsd.org/cgi/man.cgi?query=jpegtran&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jpegtran]	performs various useful	transformations	of JPEG	files.	It can
+translate the coded representation from one variant of JPEG to another,    for  example  from baseline JPEG	to progressive JPEG or vice versa.  It       can also	perform	some rearrangements of the  image  data,  for  example
+turning an image	from landscape to portrait format by rotation.
+|-
+|jpgicc||[https://www.freebsd.org/cgi/man.cgi?query=jpgicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html jpgicc] -	little cms ICC profile applier for JPEG.
+|-
+|js24||
+|-
+|js24-config||
+|-
+|js52||
+|-
+|js52-config||
+|-
+|js60||
+|-
+|js60-config||
+|-
+|json_pp||[https://www.freebsd.org/cgi/man.cgi?query=json_pp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html json_pp] converts	between	some input and output formats (one of them is
+JSON).  This program was	copied from json_xs and	modified.
+|-
+|json_reformat||
+|-
+|json_verify||
+|-
+|json-glib-format||
+|-
+|json-glib-validate||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 943: / Line 1,960: @@
 !colspan="2"|
 |-
-|
+|kactivities-cli||
-|
+|-
+|katalyzer||[https://www.freebsd.org/cgi/man.cgi?query=katalyzer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html katalyzer] analyzes Kate streams and displays  information  about	 them.
+The  type  of  information to select is selectable on the command line.        Several multiplexed Kate	streams	may be analyzed	at the same time.
+|-
+|kate||[https://www.freebsd.org/cgi/man.cgi?query=kate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kate] - Advanced text editor for KDE
+|-
+|kate-syntax-highlighter||
+|-
+|katedec||[https://www.freebsd.org/cgi/man.cgi?query=katedec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html katedec] - decodes Kate streams to a textual description
+|-
+|kateenc||[https://www.freebsd.org/cgi/man.cgi?query=kateenc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kateenc] - create	Kate streams from text input
+|-
+|kbuildsycoca5||[https://www.freebsd.org/cgi/man.cgi?query=kbuildsycoca5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kbuildsycoca5] - Rebuilds	the KService desktop file system configuration
+cache.
+|-
+|kbxutil||
+|-
+|kcookiejar5||[https://www.freebsd.org/cgi/man.cgi?query=kcookiejar5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kcookiejar5] is a	command	line interface to the HTTP cookie store	used
+by KDE, a D-BUS service to store/retrieve/clean cookies.
+|-
+|kdebugdialog5||
+|-
+|kded5||[https://www.freebsd.org/cgi/man.cgi?query=kded5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kded5] consolidates several small	services in one	process. These are     mostly D-Bus services provided by KDED modules, but it also manages       sycoca (a binary	cache of servicetypes, mimetypes and services used by       KService) and KConfig update scripts as needed.
+|-
+|kdeinit5||[https://www.freebsd.org/cgi/man.cgi?query=kdeinit5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kdeinit5] is a process launcher somewhat similar to the famous init used
+for booting UNIX. It executes KDE programs and kdeinit loadable modules       (KLMs) starting them more efficiently.
+|-
+|kdeinit5_shutdown||
+|-
+|kdeinit5_wrapper||[https://github.com/KDE/kinit/blob/master/docs/wrapper.txt kdeinit5_wrapper, kshell5 and kwrapper5] are programs thatstart programs via kdeinit.
+|-
+|key2raw||
+|-
+|key2text||
+|-
+|key2xhtml||
+|-
+|kf5-config||[https://www.freebsd.org/cgi/man.cgi?query=kf5-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kf5-config] is a command line program used to retrieve information about
+Frameworks installation or user paths.
+|-
+|kgendesignerplugin||[https://www.freebsd.org/cgi/man.cgi?query=kgendesignerplugin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kgendesignerplugin] - Generates widget plugins for Qt(TM)	Designer.
+|-
+|kglobalaccel5||
+|-
+|kiconfinder5||
+|-
+|kile||[https://kile.sourceforge.io/ Kile] - an Integrated LaTeX Editing Environment
+|-
+|kjs5||[https://www.freebsd.org/cgi/man.cgi?query=kjs5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kjs5] - KDE ECMAScript compatible	interpreter
+|-
+|kodak2ti3||
+|-
+|kpackagelauncherqml||
+|-
+|kpackagetool5||[https://www.freebsd.org/cgi/man.cgi?query=kpackagetool5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kpackagetool5] - Install,	list, remove Plasma packages
+|-
+|kpat||[https://games.kde.org/game.php?game=kpat KPat] (aka KPatience) is a relaxing card sorting game. To win the game a player has to arrange a single deck of cards in certain order amongst each other.
+|-
+|kquitapp5||
+|-
+|kreadconfig5||
+|-
+|ksba-config||
+|-
+|ksh93||[https://www.freebsd.org/cgi/man.cgi?query=ksh93&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ksh,  rksh,  pfksh]  - KornShell,	a standard/restricted command and programming	language
+|-
+|kshell5||[https://github.com/KDE/kinit/blob/master/docs/wrapper.txt kdeinit5_wrapper, kshell5 and kwrapper5] are programs thatstart programs via kdeinit.
+|-
+|ktelnetservice5||
+|-
+|ktrash5||
+|-
+|kwallet-query||[https://www.freebsd.org/cgi/man.cgi?query=kwallet-query&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html kwallet-query] comes in handy when shell scripts need to read or update
+the KDE Wallet. It works	by manipulating	the entries displayed in the KDE Wallet Manager utility. It's	only parameter is the walletname the  tool should read	or update. The operation mode is specified by the     options.
+|-
+|kwalletd5||
+|-
+|kwrapper5||[https://github.com/KDE/kinit/blob/master/docs/wrapper.txt kdeinit5_wrapper, kshell5 and kwrapper5] are programs thatstart programs via kdeinit.
+|-
+|kwrite||[https://kde.org/applications/utilities/org.kde.kwrite KWrite] is a text editor by KDE, based on the Kate's editor component.
+|-
+|kwriteconfig5||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 955: / Line 2,057: @@
 !colspan="2"|
 |-
-|
+|lame||[https://www.freshports.org/audio/lame lame] Fast MP3 encoder kit
-|
+|-
+|lc||[https://www.freebsd.org/cgi/man.cgi?query=lc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lc] tool is a license compiler for Mono. It's  used  to  convert	a  licenses.licx file	to a resource that can be embedded into	an executable.
+|-
+|ld||[https://www.freebsd.org/cgi/man.cgi?query=ld.bfd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ld] combines a number of object and archive files, relocates their data       and ties	up symbol references. Usually the last step in compiling a      program is to run ld.
+|-
+|ld.bfd||
+|-
+|ld.gold||
+|-
+|ld.lld80||
+|-
+|ld64.lld80||
+|-
+|ldapcompare||[https://www.freebsd.org/cgi/man.cgi?query=ldapcompare&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapcompare] opens a connection to an LDAP server, binds,	and performs a
+compare using specified parameters.
+|-
+|ldapdelete||[https://www.freebsd.org/cgi/man.cgi?query=ldapdelete&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapdelete] - LDAP delete	entry tool
+|-
+|ldapexop||[https://www.freebsd.org/cgi/man.cgi?query=ldapexop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapexop]	- issue	LDAP extended operations
+|-
+|ldapmodify||[https://www.freebsd.org/cgi/man.cgi?query=ldapmodify&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapmodify, ldapadd] - LDAP modify entry and LDAP	add entry tools
+|-
+|ldapmodrdn||[https://www.freebsd.org/cgi/man.cgi?query=ldapmodrdn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapmodrdn] - LDAP rename	entry tool
+|-
+|ldappasswd||[https://www.freebsd.org/cgi/man.cgi?query=ldappasswd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldappasswd] - change the password	of an LDAP entry
+|-
+|ldapsearch||[https://www.freebsd.org/cgi/man.cgi?query=ldapsearch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapsearch] - LDAP search	tool
+|-
+|ldapurl||[https://www.freebsd.org/cgi/man.cgi?query=ldapurl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapurl] extracts the components	of the     ldapuri	option argument
+|-
+|ldapwhoami||[https://www.freebsd.org/cgi/man.cgi?query=ldapwhoami&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ldapwhoami]  opens a connection to an LDAP server, binds,	and performs a
+whoami operation.
+|-
+|lefty||[https://www.freebsd.org/cgi/man.cgi?query=lefty&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lefty] is	a two-view graphics editor for technical pictures.
+|-
+|libart2-config||
+|-
+|libassuan-config||
+|-
+|libevdev-tweak-device||
+|-
+|libgcrypt-config||
+|-
+|libgtop_daemon2||
+|-
+|libgtop_server2||
+|-
+|libIDL-config-2||
+|-
+|libinput||[https://www.freebsd.org/cgi/man.cgi?query=libinput&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libinput]	- libinput-based X.Org input driver
+|-
+|libnetcfg||The [https://www.freebsd.org/cgi/man.cgi?query=libnetcfg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libnetcfg] utility can be used to configure the libnet.  Starting     from perl 5.8 libnet is part of the standard Perl distribution, but the       libnetcfg can be	used for any libnet installation.
+|-
+|libpng16-config||[https://www.freebsd.org/cgi/man.cgi?query=libpng&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libpng] -	Portable Network Graphics (PNG)	Reference Library 1.6.29
+|-
+|libwacom-list-local-devices||
+|-
+|libwmf-config||
+|-
+|libwmf-fontmap||
+|-
+|lightsoff||
+|-
+|linc-cleanup-sockets||
+|-
+|line||[https://www.freebsd.org/cgi/man.cgi?query=line&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html line]  tries  to	determine  the cache line size in bytes	of the largest       cache which is smaller than len bytes.
+|-
+|line-clip||
+|-
+|line-cull||
+|-
+|line-flat||
+|-
+|line-smooth||
+|-
+|line-stipple-wide||
+|-
+|line-userclip||
+|-
+|line-userclip-clip||
+|-
+|line-userclip-nop||
+|-
+|line-userclip-nop-clip||
+|-
+|line-wide||
+|-
+|line-xor||
+|-
+|lineloop||
+|-
+|lineloop-clip||
+|-
+|lineloop-elts||
+|-
+|linestrip||
+|-
+|linestrip-clip||
+|-
+|linestrip-flat-stipple||
+|-
+|linestrip-stipple||
+|-
+|linestrip-stipple-wide||
+|-
+|linkicc||[https://www.freebsd.org/cgi/man.cgi?query=linkicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html linkicc] - little	cms device link	generator.
+|-
+|linktest||
+|-
+|listbasic||[https://www.freebsd.org/cgi/man.cgi?query=listbasic&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html listbasic]  extracts  the	 BASIC	listing	from a ZX Spectrum snapshot or
+tape file and prints it to standard output.
+|-
+|lit2epub||
+|-
+|lit80||
+|-
+|live555HLSProxy||
+|-
+|live555MediaServer||
+|-
+|live555ProxyServer||
+|-
+|lkbib||[https://www.freebsd.org/cgi/man.cgi?query=lkbib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lkbib] - search bibliographic databases
+|-
+|lklfuse||
+|-
+|llc80||
+|-
+|lld80||
+|-
+|lld-link80||
+|-
+|lldb80||
+|-
+|lldb-argdumper80||
+|-
+|lldb-mi80||
+|-
+|lldb-server80||
+|-
+|lldb-test80||
+|-
+|lldb-vscode80||
+|-
+|lli80||
+|-
+|llvm-ar80||
+|-
+|llvm-as80||
+|-
+|llvm-bcanalyzer80||
+|-
+|llvm-cat80||
+|-
+|llvm-cfi-verify80||
+|-
+|llvm-config80||
+|-
+|llvm-cov80||
+|-
+|llvm-cvtres80||
+|-
+|llvm-cxxmap80||
+|-
+|llvm-diff80||
+|-
+|llvm-dis80||
+|-
+|llvm-dlltool80||
+|-
+|llvm-dwarfdump80||
+|-
+|llvm-dwp80||
+|-
+|llvm-elfabi80||
+|-
+|llvm-exegesis80||
+|-
+|llvm-extract80||
+|-
+|llvm-link80||
+|-
+|llvm-lit80||
+|-
+|llvm-mc80||
+|-
+|llvm-mca80||
+|-
+|llvm-modextract80||
+|-
+|llvm-mt80||
+|-
+|llvm-nm80||
+|-
+|llvm-objcopy80||
+|-
+|llvm-objdump80||
+|-
+|llvm-opt-report80||
+|-
+|llvm-pdbutil80||
+|-
+|llvm-profdata80||
+|-
+|llvm-ranlib80||
+|-
+|llvm-rc80||
+|-
+|llvm-readelf80||
+|-
+|llvm-readobj80||
+|-
+|llvm-rtdyld80||
+|-
+|llvm-size80||
+|-
+|llvm-split80||
+|-
+|llvm-stress80||
+|-
+|llvm-strings80||
+|-
+|llvm-strip80||
+|-
+|llvm-symbolizer80||
+|-
+|llvm-tblgen80||
+|-
+|llvm-undname80||
+|-
+|llvm-xray80||
+|-
+|lneato||[https://www.freebsd.org/cgi/man.cgi?query=lneato&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lneato] -	A Customizable Graph Editor
+|-
+|lobase||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|localc||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|locktest||[https://www.freebsd.org/cgi/man.cgi?query=locktest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html locktest]	- Find differences in locking between two SMB servers
+|-
+|lodbias||
+|-
+|lodraw||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|loffice||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|lofromtemplate||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|loimpress||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|bin/lomath||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|long-fixed-func||
+|-
+|lookbib||[https://www.freebsd.org/cgi/man.cgi?query=lookbib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lookbib] - search	bibliographic databases
+|-
+|loweb||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|lowntfs-3g||[https://linux.die.net/man/8/mount.lowntfs-3g ntfs-3g] - Third Generation Read/Write NTFS Driver
+|-
+|lowriter||[https://www.freebsd.org/cgi/man.cgi?query=lobase&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html libreoffice] - LibreOffice office	suite lobase,   localc,   lodraw,   lofromtemplate,       loimpress,       lomath,       loweb,       lowriter
+|-
+|lp||[https://www.freebsd.org/cgi/man.cgi?query=lp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lp]	-- front-end to	the print spooler
+|-
+|lp_solve||
+|-
+|lpoptions||[https://www.freebsd.org/cgi/man.cgi?query=lpoptions&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpoptions] - display or set printer options and defaults
+|-
+|lpq||[https://www.freebsd.org/cgi/man.cgi?query=lpq&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpq] -- spool queue	examination program
+|-
+|lpr||[https://www.freebsd.org/cgi/man.cgi?query=lpr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpr] -- off	line print
+|-
+|lprm||[https://www.freebsd.org/cgi/man.cgi?query=lprm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lprm] -- remove jobs from the line printer spooling	queue
+|-
+|lprsetup.sh||
+|-
+|lpstat||[https://www.freebsd.org/cgi/man.cgi?query=lpstat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpstat] -	compatibility program to get information about printers
+|-
+|ls2ti3||
+|-
+|lsattr||[https://www.freebsd.org/cgi/man.cgi?query=lsattr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lsattr] -	list file attributes on	a Linux	second extended	file system
+|-
+|lshal||[https://www.freebsd.org/cgi/man.cgi?query=lshal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lshal] - list HAL	devices
+|-
+|lua52||[https://www.freebsd.org/cgi/man.cgi?query=lua52&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lua]  is the standalone Lua interpreter.	It loads and executes Lua programs, either in	textual	source form or	in  precompiled	 binary	 form.       (Precompiled  binaries  are output by luac, the Lua compiler.)  lua can       be used as a batch interpreter and also interactively.
+|-
+|luac52||[https://www.freebsd.org/cgi/man.cgi?query=luac52&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html luac]  is	 the  Lua compiler.  It	translates programs written in the Lua   programming language into binary	files  containing  precompiled	chunks       that can	be later loaded	and executed.
+|-
+|lz4||[https://www.freebsd.org/cgi/man.cgi?query=lz4&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lz4 - lz4, unlz4, lz4cat] - Compress or decompress .lz4 files
+|-
+|lz4_decompress||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 968: / Line 2,370: @@
 !colspan="2"|
 |-
-|
+|macpack||[https://www.freebsd.org/cgi/man.cgi?query=macpack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html macpack] - Macintosh OS X	Packager for managed gui assemblies
-|
+|-
+|make_pysol_freecell_board.py||
+|-
+|makealias||
+|-
+|makecert||[https://www.freebsd.org/cgi/man.cgi?query=makecert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MakeCert] - Create X.509 certificates for	test purposes
+|-
+|makeconv||[https://www.freebsd.org/cgi/man.cgi?query=makeconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html makeconv]	converts the ICU converter table convertertable	into a	binary file.  The binary file has the same base	name as	convertertable but has       a .cnv extension	(instead of the	typical	.ucm extension of the convertertable	file).	 This binary file can then be read directly by ICU, or
+used by pkgdata(1) for incorporation into a larger archive or library.
+|-
+|makemhr||
+|-
+|makepqg||
+|-
+|mandelbrot||
+|-
+|mangle||
+|-
+|manywin||
+|-
+|marco||[https://www.freebsd.org/cgi/man.cgi?query=marco&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Marco]  is  a minimal X window manager that uses GTK+ for	drawing	window       frames. It is aimed at non-technical users and is designed to integrate       well  with  the	MATE  desktop. Marco is	a plain	window manager for the       adult in	you; Many window managers are like  Marshmallow	 Froot	Loops,       Marco  is like Cheerios.	It lacks some features that may	be expected by       traditional UNIX	or other technical users; these	users may want to  investigate  other	 available  window  managers for use with MATE or as a
+standalone window manager.
+|-
+|marco-message||The [https://www.freebsd.org/cgi/man.cgi?query=marco-message&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html marco-message] command is used to perform some simple	window manager
+tasks while Marco is running.
+|-
+|marco-theme-viewer||[https://www.freebsd.org/cgi/man.cgi?query=marco-theme-viewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html marco-theme-viewer] allows you to	preview	any installed Marco theme.  When  designing	a  new	Marco theme, you can use marco-theme-viewer to       benchmark the performance of a window frame, and	to preview  it	around       different types of windows in various mock scenarios.
+|-
+|marco-window-demo||[https://www.freebsd.org/cgi/man.cgi?query=marco-window-demo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html marco-window-demo - demo]	of window features
+This program demonstrates various kinds of windows that window managers   and window manager themes should handle.
+Be sure to tear off the menu and	toolbar, those are also	a special kind       of window.
+|-
+|markdown||[https://www.freebsd.org/cgi/man.cgi?query=markdown&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html markdown] -- text to html conversion tool
+|-
+|markdown_py-2.7||
+|-
+|masktest||[https://www.freebsd.org/cgi/man.cgi?query=masktest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html masktest] - Find differences in wildcard matching	between	Samba's
+implementation and that of a remote server.
+|-
+|mate-about||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-about&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-about program] is a tool to learn more about MATE and who creates MATE. It contains an introduction about the	project, and lists all     contributors.
+|-
+|mate-about-me||[https://www.freebsd.org/cgi/man.cgi?query=mate-about-me&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-about-me] --	is a control center applet.
+|-
+|mate-appearance-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-appearance-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-appearance-properties] -- is	a control center applet.
+|-
+|mate-at-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-at-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-at-properties] - configure MATE Assistive Technologies
+|-
+|mate-calc||
+|-
+|mate-calc-cmd||
+|-
+|mate-color-select||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-color-select&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-color-select]  program	is a tool to pick a color from a color       palette or from screen. It is not meant to be used on its own, but as a       MATE Desktop helper application.
+|-
+|mate-control-center||[https://www.freebsd.org/cgi/man.cgi?query=mate-control-center&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-control-center] is a	graphical user interface to configure various        aspects of MATE.       When run	without	arguments, the shell displays the control center       overview, which shows all available configuration panels. The overview       allows one to open individual panels by clicking	on them. It also has a       search entry to find panels by searching	keywords.
+|-
+|mate-default-applications-properties||
+|-
+|mate-desktop-item-edit||[https://www.freebsd.org/cgi/man.cgi?query=mate-desktop-item-edit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-desktop-item-edit] -	A small	tool to	edit .desktop files.
+|-
+|mate-dictionary||[https://www.freebsd.org/cgi/man.cgi?query=mate-dictionary&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-dictionary] - Look up words on dictionaries
+|-
+|mate-disk-usage-analyzer||[https://www.freebsd.org/cgi/man.cgi?query=mate-disk-usage-analyzer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html baobab] is able to scan either specific folders or the whole filesystem        (local and remote), in order to give the	user a graphical tree representation including each	directory size or percentage in	the branch.       It also auto-detects in real-time any change made to your home directory as far as any mounted/unmounted device. A graphical	treemap	window       is also provided	for any	selected folder.
+|-
+|mate-display-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-display-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-display-properties] - customize MATE	display	behavor
+|-
+|mate-font-viewer||[https://www.freebsd.org/cgi/man.cgi?query=mate-font-viewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-font-viewer] - preview fonts
+|-
+|mate-keybinding-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-keybinding-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-keybinding-properties] - configure MATE keybindings;  This  executable	is part	of the package 'mate-control-center': The MATE       Control Center.
+The MATE	 keybindings preference	tool enables you to  display  the  default keyboard shortcuts	and customize them to your requirements.   You  can	 also  create  hot keys. Hot keys  are keyboard	shortcuts that       start applications or perform other useful actions.
+|-
+|mate-keyboard-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-keyboard-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-keyboard-properties] - manage keyboard behaviour in MATE; This  executable	is part	of the package 'mate-control-center': The MATE       Control Center.
+Keyboard	Preferences manages all	settings related to the	keyboard in  a       MATE environment. This includes key repeat delay, cursor	blinking, lay outs and	layout options.	You can	also configure a  typing  break	 which
+locks the screen	and enforces a break from work.
+|-
+|mate-mouse-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-mouse-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-mouse-properties] - configure MATE mouse preferences
+|-
+|mate-network-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-network-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-network-properties] - configure MATE	network	proxy
+|-
+|mate-notification-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-notification-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-notification-properties] - Set up the options for desktop notifications
+|-
+|mate-panel||The [https://www.freebsd.org/cgi/man.cgi?query=mate-panel&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-panel program] provides the panels for the the MATE Desktop Environment. It is	the area on your desktop from which you	can run	applications	and  applets, and perform other	tasks. New applets may also be   installed, added	to, or removed from the	panels.
+By default, mate-panel typically	creates	a panel	 on  the  top  of  the       screen  with  applets such as a Menu Bar, Notification Area, and	Clock;      While creating a	second panel on	the bottom of the screen with a	Window      List  and  a  Workspace Switcher. Panels	can be created,	deleted, moved      around the desktop, and to other	monitors.
+|-
+|mate-panel-test-applets||[https://www.freebsd.org/cgi/man.cgi?query=mate-panel-test-applets&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-panel-test-applets]	display	 installed applets in a	dialog box and        allow you to test them.
+|-
+|mate-power-manager||
+|-
+|mate-power-preferences||
+|-
+|mate-power-statistics||
+|-
+|mate-screensaver||[https://www.freebsd.org/cgi/man.cgi?query=mate-screensaver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE  Screensaver]  is  the default screen saver and locker for the MATE       Desktop.	It is designed with simplicity and  security  in  mind.	 matescreensaver integrates well with	the MATE desktop, and it supports User       Switching and the ability to lock down configuration settings.
+|-
+|mate-screensaver-command||[https://www.freebsd.org/cgi/man.cgi?query=mate-screensaver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE  Screensaver]  is  the default screen saver and locker for the MATE       Desktop.	It is designed with simplicity and  security  in  mind.	 matescreensaver integrates well with	the MATE desktop, and it supports User       Switching and the ability to lock down configuration settings.
+|-
+|mate-screensaver-preferences||[https://www.freebsd.org/cgi/man.cgi?query=mate-screensaver-preferences&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-screensaver-preferences] - Configure	MATE Screensaver
+|-
+|mate-screenshot||[https://www.freebsd.org/cgi/man.cgi?query=mate-screenshot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-screenshot] - capture the screen, a window, or an user-defined area
+and save	the snapshot image to a	file.
+|-
+|mate-search-tool||[https://www.freebsd.org/cgi/man.cgi?query=mate-search-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE Search Tool] is a utility for finding files on your system. To perform  a	basic  search,	you can	type a filename	or a partial filename,      with or without wildcards. To refine your search, you can  apply	 additional search options.
+|-
+|mate-session||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-session&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session]  program starts up the	MATE desktop environment. This        command is typically executed by	your Login/Display Manager (like  GDM,       LXDM, XDM, SLiM,	or from	your X startup scripts like .xinitrc). It will       load either your	saved session, or it will provide  a  default  session
+for  the	 user  as  defined by the system administrator (or the default       MATE installation on your system).
+|-
+|mate-session-inhibit||[https://www.freebsd.org/cgi/man.cgi?query=mate-session-inhibit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session-inhibit] can	inhibit	certain	matesession functionality       while executing the given COMMAND. To achieve this, it calls the       Inhibit() method	of the mate-session D-Bus API and creates an  inhibitor. The inhibitor	is automatically removed when       mate-session-inhibit exits.
+|-
+|mate-session-properties||The [https://www.freebsd.org/cgi/man.cgi?query=mate-session-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session-properties] program enables the users to	configure what  applications should be started on login,	in  addition  to  the  default       startup applications configured on the system.
+|-
+|mate-session-save||The [https://www.freebsd.org/cgi/man.cgi?query=mate-session-save&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-session-save] program can be used from a	MATE session to	either       end  the	 current MATE session or save a	snapshot of the	currently running applications (but not both). This session will be  later  restored  at your next MATE session.
+|-
+|mate-system-log||[https://www.freebsd.org/cgi/man.cgi?query=mate-system-log&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE System Log Viewer] is a simple utility to display system log	files.
+|-
+|mate-system-monitor||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-system-monitor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-system-monitor] allows	 you to	view and control the processes       running on your system. You can access detailed memory maps, send  signals, and terminate the processes.
+|-
+|mate-terminal||[https://www.freebsd.org/cgi/man.cgi?query=mate-terminal&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-terminal] - manual page for MATE Terminal Emulator
+|-
+|mate-terminal.wrapper||
+|-
+|mate-thumbnail-font||[https://www.freebsd.org/cgi/man.cgi?query=mate-thumbnail-font&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-thumbnail-font] is a	command-line tool for creating	thumbnails  of      PCF fonts.
+|-
+|mate-typing-monitor||[https://www.freebsd.org/cgi/man.cgi?query=mate-typing-monitor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-typing-monitor] - configure MATE network proxy
+This  executable	is part	of the package 'mate-control-center': The MATE    Control Center.
+If you use too much computer you	may be risking your health.  Use  this       tool  for  reminding yourself to	take little (typing) breaks in regular     intervals.
+|-
+|mate-volume-control||The  [https://www.freebsd.org/cgi/man.cgi?query=mate-volume-control&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MATE Volume	Control] application is an audio	mixer that enables you    to mix audio and	adjust volume levels of	various	audio mixer devices on       your system.
+|-
+|mate-volume-control-status-icon||
+|-
+|mate-window-properties||[https://www.freebsd.org/cgi/man.cgi?query=mate-window-properties&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-window-properties] -	configure MATE network proxy
+|-
+|mate-wm||[https://www.freebsd.org/cgi/man.cgi?query=mate-wm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mate-wm] - Start the window manager configured by	the user
+|-
+|mautil||The [https://www.freebsd.org/cgi/man.cgi?query=mautil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mautil] tool works with Mono.Addins repositories and packages.
+|-
+|mconfig||[https://www.freebsd.org/cgi/man.cgi?query=mconfig&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mconfig] can  be	used to	edit .NET configuration	files, by adding "features" (that is sets of xml statements) defined in one  of  the	config       files  read  by mconfig.	The config file	can also define	layouts	of default configuration files, which	may be useful for  bootstrapping  your
+.NET projects.
+|-
+|mcs||[https://www.freebsd.org/cgi/man.cgi?query=mcs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mcs] is the Mono C# compiler, an implementation of the ECMA-334 language specification.  You can pass one	or more	options	to drive the compiler,  and  a set of source files.  Extra options or arguments can be provided    in a response file.  Response files are referenced by prepending	the  @     symbol to the response file name.
+|-
+|mdassembler||[https://www.freebsd.org/cgi/man.cgi?query=mdassembler+%09&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdassembler] - Compile documentation for use in monodoc browser
+|-
+|mdb_copy||The [https://www.freebsd.org/cgi/man.cgi?query=mdb_copy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_copy] utility copies an LMDB environment. The environment can be       copied regardless of whether it is currently in use.   No  lockfile  is       created,	since it gets recreated	at need.
+|-
+|mdb_dump||The  [https://www.freebsd.org/cgi/man.cgi?query=mdb_dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_dump] utility  reads a database	and writes its contents	to the
+standard	output using a portable	flat-text  format  understood  by  the        [https://www.freebsd.org/cgi/man.cgi?query=mdb_load&apropos=0&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_load(1)] utility.
+|-
+|mdb_load||[https://www.freebsd.org/cgi/man.cgi?query=mdb_load&apropos=0&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html The  mdb_load]  utility  reads from the standard input and loads it into
+the LMDB	environment envpath.
+|-
+|mdb_stat||The [https://www.freebsd.org/cgi/man.cgi?query=mdb_stat&apropos=0&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdb_stat] utility displays the status	of an LMDB environment.
+|-
+|mdbrebase||
+|-
+|mdoc||[https://www.freebsd.org/cgi/man.cgi?query=mdoc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc] - Mono documentation management tool
+|-
+|mdoc-assemble||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-assemble&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc  assemble]  creates	.tree and .zip files from PATHS	for use	in the
+monodoc(1) documentation	browser.
+|-
+|mdoc-export-html||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-export-html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc export-html] creates	HTML files from	the mdoc(5)-formatted documentation XML files	within DIRECTORIES.
+|-
+|mdoc-export-msxdoc||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-export-msxdoc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc  export-msxdoc] creates Microsoft XML Documentation (as produced by        csc /doc) from the mdoc(5)-formatted documentation XML files within DIRECTORIES.
+|-
+|mdoc-update||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-update&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc update] is responsible for the following:
+* Creating documentation stubs based on ASSEMBLIES.	 The stub-creation process will create	new mdoc(5) XML	files  for  each  type  within ASSEMBLIES, and provide documentation stubs for each member of those types.
+* Update  documentation  stubs  based  on  ASSEMBLIES.    Existing    mdoc(5)  documentation  can be updated to	reflect	changes	within      ASSEMBLIES, such as added	types and  members,  while  preserving    existing documentation.
+In some limited circumstances, renames will be tracked, minimizing the documentation burden when	e.g. a parameter is renamed.
+|-
+|mdoc-validate||[https://www.freebsd.org/cgi/man.cgi?query=mdoc-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc validate] - Validate	XML documents against a	schema
+|-
+|mdvalidater||[https://www.freebsd.org/cgi/man.cgi?query=mdvalidater&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdvalidator] has been obsoleted by mdoc(1).   See	 the  [https://www.freebsd.org/cgi/man.cgi?query=mdoc-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mdoc-validate(1)]     man page.
+|-
+|meinproc5||[https://www.freebsd.org/cgi/man.cgi?query=meinproc5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html meinproc5] - KDE translator for XML
+|-
+|metacity||[https://www.freebsd.org/cgi/man.cgi?query=metacity&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html METACITY] - minimal GTK3 Window Manager
+|-
+|metacity-message||[https://www.freebsd.org/cgi/man.cgi?query=metacity-message&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html METACITY-MESSAGE] - a command to send a message to Metacity
+|-
+|metacity-theme-viewer||[https://www.freebsd.org/cgi/man.cgi?query=metacity-theme-viewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html metacity-theme-viewer]  allows  you  to  preview	any installed Metacity        theme.
+|-
+|metacity-window-demo||[https://www.freebsd.org/cgi/man.cgi?query=metacity-window-demo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html metacity-window-demo] - demo of window features
+|-
+|metaflac||[https://www.freebsd.org/cgi/man.cgi?query=metaflac&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html metaflac]	 -  program  to	 list, add, remove, or edit metadata in	one or
+more FLAC files.
+|-
+|mhddfs||[https://www.freebsd.org/cgi/man.cgi?query=mhddfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mhddfs]  -  The  driver  combines	a several mount	points into the	single      one.
+|-
+|mib2c||The [https://www.freebsd.org/cgi/man.cgi?query=mib2c&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mib2c] tool is designed to take a portion of the MIB	tree  (as  defined  by a MIB file) and generate the template C code necessary	to implement the relevant management objects within it.
+|-
+|mib2c-update||Use [https://www.freebsd.org/cgi/man.cgi?query=mib2c-update&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mib2c-update]  to  generate	your mib2c code	templates, and it will        track the original code and the changes you make	to the	code.  If  the       mib2c template changes (bug fixes, enhances in later releases), re-running mib2c will update the template and then attempt to	re-apply  your
+changes.
+|-
+|midicat||The [https://www.freebsd.org/cgi/man.cgi?query=midicat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html midicat] utility receives MIDI data from the given input MIDI port      and/or sends it to	the given output MIDI port.
+|-
+|mikeyParse||
+|-
+|miniunzip||[https://www.freebsd.org/cgi/man.cgi?query=miniunzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html minizip] is a simple tool	which allows the extraction of compressed file
+archives	in the ZIP format used by the MS-DOS utility  PKZIP.   It  was       written	as  a  demonstration of	the zlib(3) library and	therefore lack       many of the features of the unzip(1) program.
+|-
+|minizip||[https://www.freebsd.org/cgi/man.cgi?query=miniunzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html minizip] is a simple tool	which allows the extraction of compressed file
+archives	in the ZIP format used by the MS-DOS utility  PKZIP.   It  was       written	as  a  demonstration of	the zlib(3) library and	therefore lack       many of the features of the unzip(1) program.
+|-
+|mk_cmds||[https://www.freebsd.org/cgi/man.cgi?query=mk_cmds&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Mk_cmds] converts	a table	listing	command	names and associated help messages into a C source file suitable for use with	the ss(3) library.
+|-
+|mkbundle||[https://www.freebsd.org/cgi/man.cgi?query=mkbundle&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkbundle] generates  an	executable  program  that  will	contain	static
+copies of the assemblies	listed on the command line.  By	 default  only       the  assemblies	specified  in the command line will be included	in the       bundle.	To automatically include all of	the  dependencies  referenced,       use the "--deps"	command	line option.
+|-
+|mkfontdir||[https://www.freebsd.org/cgi/man.cgi?query=mkfontdir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkfontdir] - create an index of X	font files in a	directory
+|-
+|mkfontscale||[https://www.freebsd.org/cgi/man.cgi?query=mkfontscale&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkfontscale] - create an index of	scalable font files for	X
+|-
+|mkisofs||[https://www.freebsd.org/cgi/man.cgi?query=mkisofs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkisofs] -  create  an  hybrid ISO-9660/JOLIET/HFS/UDF filesystem-image
+with optional Rock Ridge	attributes.
+|-
+|mm2gv||[https://www.freebsd.org/cgi/man.cgi?query=mm2gv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mm2gv]  converts	a sparse matrix	of the Matrix Market format to a graph      in the GV (formerly DOT)	format
+|-
+|mmc-tool||
+|-
+|mmroff||[https://www.freebsd.org/cgi/man.cgi?query=mmroff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mmroff]  is  a  simple  preprocessor for groff, it is used for expanding       references in mm, see groff_mm(7).  groff is executed twice, first with       -z  and	-rRef=1	to collect all references and then to do the real processing when the	reference file is up to	date.
+|-
+|mod||
+|-
+|modularize80||
+|-
+|modutil||
+|-
+|mono-api-html||
+|-
+|mono-api-info||[https://www.freebsd.org/cgi/man.cgi?query=mono-api-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-api-info] - Expose IL structure of CLR assemblies as	XML.
+|-
+|mono-boehm||
+|-
+|mono-cil-strip||[https://www.freebsd.org/cgi/man.cgi?query=mono-cil-strip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-cil-strip]  is a tool which takes an	assembly, and empty its	method
+bodies.	This is	useful to reduce an assembly size when an assembly has       already	been compiled using Mono's Ahead Of Time compiler (AOT), where       the CIL code is no longer necessary, but	the metadata still is.
+|-
+|mono-configuration-crypto||[https://www.freebsd.org/cgi/man.cgi?query=mono-configuration-crypto&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-configuration-crypto]  -  Mono configuration utility to manage encryption	keys and encrypt/decrypt config	file sections
+|-
+|mono-find-provides||
+|-
+|mono-find-requires||
+|-
+|mono-gdb.py||
+|-
+|mono-heapviz||
+|-
+|mono-package-runtime||
+|-
+|mono-service||[https://www.freebsd.org/cgi/man.cgi?query=mono-service&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-service, mono-service2] - Mono ServiceProcess host
+|-
+|mono-service2||[https://www.freebsd.org/cgi/man.cgi?query=mono-service&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-service, mono-service2] - Mono ServiceProcess host
+|-
+|mono-sgen||
+|-
+|mono-sgen-gdb.py||
+|-
+|mono-shlib-cop||[https://www.freebsd.org/cgi/man.cgi?query=mono-shlib-cop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-shlib-cop] -	Shared Library Usage Checker
+|-
+|mono-symbolicate||[https://www.freebsd.org/cgi/man.cgi?query=mono-symbolicate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-symbolicate] - Mono Symbolicate Tool
+|-
+|mono-test-install||
+|-
+|mono-xmltool||[https://www.freebsd.org/cgi/man.cgi?query=mono-xmltool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mono-xmltool] - Mono XML validation and transformation tool.
+|-
+|monodis||[https://www.freebsd.org/cgi/man.cgi?query=monodis&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  monodis] - CIL image content dumper and disassembler.
+|-
+|monodocer||[https://www.freebsd.org/cgi/man.cgi?query=monodocer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monodocer] - ECMA	Documentation Format Support
+|-
+|monodocs2html||[https://www.freebsd.org/cgi/man.cgi?query=monodocs2html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monodocs2html] - Translate Monodoc XML to	HTML
+|-
+|monodocs2slashdoc||
+|-
+|monograph||
+|-
+|monolinker||[https://www.freebsd.org/cgi/man.cgi?query=monolinker&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monolinker] is a CIL Linker.  The	linker is a tool one can use  to  only
+ship the	minimal	possible set of	functions that a set of	programs might      require to run as opposed to the	full libraries.
+|-
+|monop||[https://www.freebsd.org/cgi/man.cgi?query=monop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monop, monop2] - Mono Class Outline Viewer
+|-
+|monop2||[https://www.freebsd.org/cgi/man.cgi?query=monop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html monop, monop2] - Mono Class Outline Viewer
+|-
+|morph3d||[https://www.freebsd.org/cgi/man.cgi?query=morph3d&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html morph3d] - 3d morphing objects. Another 3d shape-changing GL hack. It has the same  shiny-plastic  feel       as Superquadrics, as many computer-generated objects do...
+|-
+|mouse-dpi-tool||
+|-
+|mozcerts-qt5||
+|-
+|mozo||[https://www.freebsd.org/cgi/man.cgi?query=mozo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Mozo]  is	a menu editor for MATE using the freedesktop.org menu specification. It is a fork of Alacarte.
+|-
+|mozroots||[https://www.freebsd.org/cgi/man.cgi?query=mozroots&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mozroots] - Download and import trusted root certificates	from Mozilla's
+LXR into	Mono's certificate store
+|-
+|mp3fs||[https://www.freebsd.org/cgi/man.cgi?query=mp3fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mp3fs] - mounts and transcodes FLACs to MP3s on the fly
+|-
+|mp3rtp||
+|-
+|mpeg2dec||[https://www.freebsd.org/cgi/man.cgi?query=mpeg2dec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mpeg2dec] - decode MPEG and MPEG2	video streams
+|-
+|MPEG2TransportStreamIndexer||
+|-
+|mpg123||[https://www.freebsd.org/cgi/man.cgi?query=mpg123&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mpg123] -	play audio MPEG	1.0/2.0/2.5 stream (layers 1, 2	and 3)
+|-
+|mpg123-id3dump||
+|-
+|mpg123-strip||
+|-
+|mpicalc||
+|-
+|mppcheck||
+|-
+|mpplu||
+|-
+|mppprof||
+|-
+|mprof-report||[https://www.freebsd.org/cgi/man.cgi?query=mprof-report&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mprof-report(1)] - The Mono	log profiler can be used to collect a lot of information about        a program running in the	Mono runtime.  This data  can  be  used	 (both       while  the  process is running and later) to do analyses	of the program       behaviour, determine resource usage, performance	issues	or  even  look       for particular execution	patterns.
+|-
+|msd-background-helper||
+|-
+|msgattrib||[https://www.freebsd.org/cgi/man.cgi?query=msgattrib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgattrib] - attribute matching and manipulation on message catalog
+|-
+|msgcat||[https://www.freebsd.org/cgi/man.cgi?query=msgcat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgcat] -	combines several message catalogs
+|-
+|msgcmp||[https://www.freebsd.org/cgi/man.cgi?query=msgcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgcmp] -	compare	message	catalog	and template
+|-
+|msgcomm||[https://www.freebsd.org/cgi/man.cgi?query=msgcomm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgcomm] - match two message catalogs
+|-
+|msgconv||[https://www.freebsd.org/cgi/man.cgi?query=msgconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgconv] - character set conversion for message catalog
+|-
+|msgen||[https://www.freebsd.org/cgi/man.cgi?query=msgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgen] - create English message catalog
+|-
+|msgexec||[https://www.freebsd.org/cgi/man.cgi?query=msgexec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgexec] - process translations of message catalog
+|-
+|msgfilter||[https://www.freebsd.org/cgi/man.cgi?query=msgfilter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgfilter] - edit	translations of	message	catalog
+|-
+|msgfmt||[https://www.freebsd.org/cgi/man.cgi?query=msgfmt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgfmt] -	compile	message	catalog	to binary format
+|-
+|msggrep||[https://www.freebsd.org/cgi/man.cgi?query=msggrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msggrep] - pattern matching on message catalog
+|-
+|msginit||[https://www.freebsd.org/cgi/man.cgi?query=msginit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msginit] - initialize a message catalog
+|-
+|msgmerge||[https://www.freebsd.org/cgi/man.cgi?query=msgmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgmerge] - merge	message	catalog	and template
+|-
+|msgunfmt||[https://www.freebsd.org/cgi/man.cgi?query=msgunfmt&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msgunfmt]	- uncompile message catalog from binary	format
+|-
+|msguniq||[https://www.freebsd.org/cgi/man.cgi?query=msguniq&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html msguniq] - unify duplicate translations in message catalog;        Unifies	duplicate translations in a translation	catalog.  Finds	duplicate translations of the	same message ID.  Such duplicates are  invalid     input  for other	programs like msgfmt, msgmerge or msgcat.  By default,       duplicates are merged together.	When using the --repeated option, only       duplicates  are output, and all other messages are discarded.  Comments       and extracted comments will be cumulated, except	that if	--use-first is
+specified,  they	 will be taken from the	first translation.  File positions will be cumulated.	 When using the	 --unique  option,  duplicates       are discarded.
+|-
+|mtdev-test||
+|-
+|mtp-albumart||
+|-
+|mtp-albums||
+|-
+|mtp-connect||
+|-
+|mtp-detect||
+|-
+|mtp-emptyfolders||
+|-
+|mtp-files||
+|-
+|mtp-filetree||
+|-
+|mtp-folders||
+|-
+|mtp-format||
+|-
+|mtp-getplaylist||
+|-
+|mtp-newplaylist||
+|-
+|mtp-playlists||
+|-
+|mtp-reset||
+|-
+|mtp-thumb||
+|-
+|mtp-tracks||
+|-
+|mtp-trexist||
+|-
+|multiarb||
+|-
+|multictx||
+|-
+|multinoise||
+|-
+|multitex||
+|-
+|munch||The [https://www.freebsd.org/cgi/man.cgi?query=munch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html munch] program performs the munching squares hack.  It picks	square        size,  position,	 and  gravity randomly.	 It also displays a creatively       broken misimplementation	of the classic algorithm.
+|-
+|mutter||[https://www.freebsd.org/cgi/man.cgi?query=mutter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html MUTTER] -	Clutter	based compositing GTK2 Window Manager
+|-
+|mvxattr||[https://www.freebsd.org/cgi/man.cgi?query=mvxattr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mvxattr] - Recursively rename extended attributes
+|-
+|mwaw2csv||
+|-
+|mwaw2html||
+|-
+|mwaw2raw||
+|-
+|mwaw2svg||
+|-
+|mwaw2text||
+|-
+|mwawFile||
+|-
+|mwawZip||
+|-
+|my_print_defaults||[https://www.freebsd.org/cgi/man.cgi?query=my_print_defaults&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html my_print_defaults] displays the options that are present in option       groups of option	files. The output indicates what options will be used       by programs that	read the specified option groups. For example, the       mysqlcheck program reads	the [mysqlcheck] and [client] option groups.
+|-
+|myisam_ftdump||[https://www.freebsd.org/cgi/man.cgi?query=myisam_ftdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisam_ftdump] displays information about	FULLTEXT indexes in MyISAM
+tables. It reads	the MyISAM index file directly,	so it must be run on       the server host where the table is located. Before using	myisam_ftdump,       be sure to issue	a FLUSH	TABLES statement first if the server is       running.
+|-
+|myisamchk||The [https://www.freebsd.org/cgi/man.cgi?query=myisamchk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisamchk] utility gets information about your database tables or       checks, repairs,	or optimizes them.  myisamchk works with MyISAM	tables       (tables that have .MYD and .MYI files for storing data and indexes).
+|-
+|myisamlog||[https://www.freebsd.org/cgi/man.cgi?query=myisamlog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisamlog] processes the contents	of a MyISAM log	file. To create	such a
+file, start the server with a --log-isam=log_file option.
+|-
+|myisampack||The [https://www.freebsd.org/cgi/man.cgi?query=myisampack&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html myisampack] utility compresses MyISAM	tables.	 myisampack works by
+compressing each	column in the table separately.	Usually, myisampack       packs the data file 40% to 70%.
+|-
+|mysql||[https://www.freebsd.org/cgi/man.cgi?query=mysql&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql] is	a simple SQL shell with	input line editing capabilities. It    supports	interactive and	noninteractive use. When used interactively,       query results are presented in an ASCII-table format. When used       noninteractively	(for example, as a filter), the	result is presented in       tab-separated format. The output	format can be changed using command       options.
+|-
+|mysql_config||[https://www.freebsd.org/cgi/man.cgi?query=mysql_config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_config] provides you with useful information for compiling your        MySQL client and	connecting it to MySQL.	It is a	shell script, so it is       available only on Unix and Unix-like systems.
+|-
+|mysql_config_editor||The [https://www.freebsd.org/cgi/man.cgi?query=mysql_config_editor&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_config_editor] utility enables you to store authentication       credentials in an encrypted login path file named .mylogin.cnf. The       file location is	the %APPDATA%\MySQL directory on Windows and the       current user's home directory on	non-Windows systems. The file can be       read later by MySQL client programs to obtain authentication       credentials for connecting to MySQL Server.
+|-
+|mysql_install_db||[https://www.freebsd.org/cgi/man.cgi?query=mysql_install_db&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_install_db] - initialize MySQL data	directory
+|-
+|mysql_plugin||[https://www.freebsd.org/cgi/man.cgi?query=mysql_plugin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_plugin] - configure	MySQL server plugins
+|-
+|mysql_secure_installation||[https://www.freebsd.org/cgi/man.cgi?query=mysql_secure_installation&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_secure_installation] - improve MySQL installation security
+|-
+|mysql_ssl_rsa_setup||
+|-
+|mysql_tzinfo_to_sql||The [https://www.freebsd.org/cgi/man.cgi?query=mysql_tzinfo_to_sql&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_tzinfo_to_sql] program loads the time zone tables in the mysql       database. It is used on systems that have a zoneinfo database (the set       of files	describing time	zones).	Examples of such systems are Linux,       FreeBSD,	Solaris, and OS	X. One likely location for these files is the       /usr/share/zoneinfo directory (/usr/share/lib/zoneinfo on Solaris). If       your system does	not have a zoneinfo database, you can use the       downloadable package described in Section 11.6, "MySQL Server Time Zone       Support".
+|-
+|mysql_upgrade||[https://www.freebsd.org/cgi/man.cgi?query=mysql_upgrade&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysql_upgrade] examines all tables in all	databases for      incompatibilities with the current version of MySQL Server.       mysql_upgrade also upgrades the system tables so	that you can take       advantage of new	privileges or capabilities that	might have been	added.
+|-
+|mysqladmin||[https://www.freebsd.org/cgi/man.cgi?query=mysqladmin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqladmin] - client for administering a MySQL server
+|-
+|mysqlbinlog||[https://www.freebsd.org/cgi/man.cgi?query=mysqlbinlog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlbinlog] - utility for processing binary log files
+|-
+|mysqlcheck||[https://www.freebsd.org/cgi/man.cgi?query=mysqlcheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlcheck] - a table maintenance	program
+|-
+|mysqld_multi||[https://www.freebsd.org/cgi/man.cgi?query=mysqld_multi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqld_multi] is designed	to manage several mysqld processes that	listen
+for connections on different Unix socket	files and TCP/IP ports.	It can       start or	stop servers, or report	their current status.
+|-
+|mysqld_safe||[https://www.freebsd.org/cgi/man.cgi?query=mysqld_safe&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqld_safe] - MySQL server startup script
+|-
+|mysqldump||[https://www.freebsd.org/cgi/man.cgi?query=mysqldump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqldump] - a database backup program
+|-
+|mysqldumpslow||[https://www.freebsd.org/cgi/man.cgi?query=mysqldumpslow&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqldumpslow] - Summarize slow query log	files
+|-
+|mysqlimport||[https://www.freebsd.org/cgi/man.cgi?query=mysqlimport&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlimport] - a data import program
+|-
+|mysqlpump||
+|-
+|mysqlshow||The [https://www.freebsd.org/cgi/man.cgi?query=mysqlshow&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlshow] client can	be used	to quickly see which databases exist,
+their tables, or	a table's columns or indexes.
+|-
+|mysqlslap||[https://www.freebsd.org/cgi/man.cgi?query=mysqlslap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqlslap] is a diagnostic program designed to emulate client load for a
+MySQL server and	to report the timing of	each stage. It works as	if       multiple	clients	are accessing the server.
+|-
+|mysqltest||[https://www.freebsd.org/cgi/man.cgi?query=mysqltest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mysqltest] - program to run test cases
+|-
+|mysqlxtest||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 981: / Line 2,886: @@
 !colspan="2"|
 |-
-|
+|nano||[https://www.freebsd.org/cgi/man.cgi?query=nano&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nano]  is	 a small, free and friendly editor which aims to replace Pico,       the default editor included in the non-free Pine	package.   On  top  of       copying	Pico's	look  and  feel, nano also implements some missing (or       disabled	by default) features in	Pico, such as "search and replace" and       "go to line and column number".
-|
+|-
+|natpmpc||
+|-
+|nautilus||[https://www.freebsd.org/cgi/man.cgi?query=nautilus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nautilus] - the GNOME File Manager
+|-
+|nautilus-autorun-software||
+|-
+|ndrdump||[https://www.freebsd.org/cgi/man.cgi?query=ndrdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ndrdump] tries to	parse the specified filename using Samba's parser for
+the specified pipe and function.	The third argument should be either in       or out, depending on whether the	data should be parsed as a request or       a reply.
+|-
+|nemo||[https://www.freebsd.org/cgi/man.cgi?query=nemo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nemo] - the Cinnamon File	Manager
+|-
+|nemo-autorun-software||
+|-
+|nemo-connect-server||[https://www.freebsd.org/cgi/man.cgi?query=nemo-connect-server&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nemo-connect-server] - To	Access a remote	server
+|-
+|nemo-open-with||
+|-
+|nemo-preview||
+|-
+|neofetch||
+|-
+|neon-config||[https://www.freebsd.org/cgi/man.cgi?query=neon-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html neon-config] - script providing information about	installed copy of neon       library
+|-
+|neqn||The  [https://www.freebsd.org/cgi/man.cgi?query=neqn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html neqn]  program  is  actually	 just a	shell script which invokes the       [https://www.freebsd.org/cgi/man.cgi?query=eqn&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports eqn(1)] command with the ascii output device.
+|-
+|net||[https://www.freebsd.org/cgi/man.cgi?query=net&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html net] - Tool for administration of	Samba and remote CIFS servers.
+|-
+|net-snmp-cert||
+|-
+|net-snmp-config||[https://www.freebsd.org/cgi/man.cgi?query=net-snmp-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html net-snmp-config] -  returns  information	 about	installed net-snmp libraries and binaries
+|-
+|net-snmp-create-v3-user||The  [https://www.freebsd.org/cgi/man.cgi?query=net-snmp-create-v3-user&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html net-snmp-create-v3-user]  shell  script is designed to create a new      user in net-snmp	configuration file  (/var/net-snmp/snmpd.conf  by  default).
+|-
+|netcardmgr||
+|-
+|nettle-hash||
+|-
+|nettle-lfib-stream||
+|-
+|nettle-pbkdf2||
+|-
+|networkmgr||
+|-
+|ngettext||The  [https://www.freebsd.org/cgi/man.cgi?query=ngettext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ngettext]  program  translates  a natural language message into the       user's language,	by looking up the translation in  a  message  catalog,       and  chooses  the  appropriate plural form, which depends on the	number       COUNT and the language of the message catalog where the translation was       found.
+|-
+|nm||[https://www.freebsd.org/cgi/man.cgi?query=nm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nm] -- display symbolic information	in object files; The nm utility displays symbolic information in the object	files, executables, and object library files	named by its arguments.	 Lack of symbolic information in an otherwise valid input file, is not	considered to    be	an error.  If no files are specified on	the command line, nm will attempt to read a.out.
+|-
+|nmblookup||[https://www.freebsd.org/cgi/man.cgi?query=nmblookup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nmblookup] - NetBIOS over	TCP/IP client used to lookup NetBIOS names; nmblookup is used to query NetBIOS names	and map	them to	IP addresses       in a network using NetBIOS over TCP/IP queries. The options allow the       name queries to be directed at a	particular IP broadcast	area or	to a
+particular machine. All queries are done	over UDP.
+|-
+|noise||
+|-
+|noise2||
+|-
+|nop||[https://www.freebsd.org/cgi/man.cgi?query=nop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nop] reads a stream of graphs and	prints each in pretty-printed (canonical) format on stdout. If no files are given, it	reads from stdin.
+|-
+|notify-send||
+|-
+|npth-config||
+|-
+|nroff||The [https://www.freebsd.org/cgi/man.cgi?query=nroff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nroff] script	emulates the nroff command using groff.	  Only	ascii,
+latin1, koi8-r, utf8, and cp1047	are valid arguments for	the -T option,       selecting the output encoding emitted by	grotty,	groff's	TTY output device.  If an invalid or no -T option is given, nroff checks the current
+locale to select	a default output device.
+|-
+|nspr-config||
+|-
+|nss-config||
+|-
+|ntfs-3g||[https://www.freebsd.org/cgi/man.cgi?query=ntfs-3g&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfs-3g]	is  an	NTFS  driver,  which  can create, remove, rename, move
+files, directories, hard	links, and streams;  it	 can  read  and	 write       files,  including  streams,  sparse  files and transparently compressed       files; it can handle special files like symbolic	 links,	 devices,  and       FIFOs;  moreover	 it provides standard management of file ownership and       permissions, including POSIX ACLs.
+|-
+|ntfs-3g.probe||The  [https://www.freebsd.org/cgi/man.cgi?query=ntfs-3g.probe&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfs-3g.probe]  utility tests a volume if it's NTFS mountable readonly or read-write, and exits with a  status  value  accordingly.   The       volume can be a block device or image file.
+|-
+|ntfscat||[https://www.freebsd.org/cgi/man.cgi?query=ntfscat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscat] - print NTFS files and streams on the standard output
+|-
+|ntfscluster||[https://www.freebsd.org/cgi/man.cgi?query=ntfscluster&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscluster] - identify files in a specified region of an	NTFS volume.
+|-
+|ntfscmp||[https://www.freebsd.org/cgi/man.cgi?query=ntfscmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscmp] - compare two NTFS filesystems and tell the differences
+|-
+|ntfsfix||[https://www.freebsd.org/cgi/man.cgi?query=ntfsfix&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsfix] - fix common errors and force Windows to	check NTFS
+|-
+|ntfsinfo||[https://www.freebsd.org/cgi/man.cgi?query=ntfsinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsinfo] - dump a file's	attributes
+|-
+|ntfsls||[https://www.freebsd.org/cgi/man.cgi?query=ntfsls&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsls] -	list directory contents	on an NTFS filesystem
+|-
+|ntlm_auth||[https://www.freebsd.org/cgi/man.cgi?query=ntlm_auth&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntlm_auth] - tool	to allow external access to Winbind's NTLM
+authentication function
+|-
+|numbers2csv||
+|-
+|numbers2raw||
+|-
+|numbers2text||
+|-
+|nunit-console||
+|-
+|nunit-console2||
+|-
+|nunit-console4||
+|-
+|nvidia-bug-report.sh||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 994: / Line 3,007: @@
 !colspan="2"|
 |-
-|
+|objcopy||[https://www.freebsd.org/cgi/man.cgi?query=objcopy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html objcopy] --	copy and translate object files
-|
+|-
+|objdump||[https://www.freebsd.org/cgi/man.cgi?query=objdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html objdump] - display information from object files.
+|-
+|ocs||
+|-
+|ocspclnt||
+|-
+|ocsptool||[https://www.freebsd.org/cgi/man.cgi?query=ocsptool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ocsptool] - GnuTLS OCSP tool; Ocsptool	 is  a program that can	parse and print	information about OCSP       requests/responses, generate requests and verify	responses.
+|-
+|oeminst||
+|-
+|offset||
+|-
+|oidcalc||
+|-
+|okular||[https://www.freebsd.org/cgi/man.cgi?query=okular&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html okular] -	a universal document viewer
+|-
+|okularkirigami||
+|-
+|oLschema2ldif||[https://www.freebsd.org/cgi/man.cgi?query=oLschema2ldif&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html oLschema2ldif] is	a simple tool that converts standard OpenLDAP schema
+files to	a LDIF format that is understood by LDB.
+|-
+|openal-info||
+|-
+|openRTSP||
+|-
+|opj_compress||
+|-
+|opj_decompress||
+|-
+|opj_dump||
+|-
+|opt80||
+|-
+|orbit2-config||
+|-
+|orbit-idl-2||
+|-
+|orc-bugreport||
+|-
+|orcc||
+|-
+|orcus-css-dump||
+|-
+|orcus-detect||
+|-
+|orcus-json||
+|-
+|orcus-mso-encryption||
+|-
+|orcus-xml-dump||
+|-
+|orcus-yaml||
+|-
+|orcus-zip-dump||
+|-
+|osage||[https://www.freebsd.org/cgi/man.cgi?query=osage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html osage] - filter for drawing clustered graphs
+|-
+|out123||[https://www.freebsd.org/cgi/man.cgi?query=out123&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html out123] -	send raw PCM audio or a	waveform pattern to an output device
+|-
+|overlay||[https://www.freebsd.org/cgi/man.cgi?query=overlay&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html overlay,	overwrite, copywin] - overlay and manipulate overlapped curses
+windows
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,007: / Line 3,086: @@
 !colspan="2"|
 |-
-|
+|p7content||[https://github.com/servo/nss/blob/master/cmd/p7content/p7content.c p7content] -- A command to display pkcs7 content.
-|
+|-
+|p7env||[https://github.com/servo/nss/blob/master/cmd/p7env/p7env.c p7env] -- A command to create a pkcs7 enveloped data.
+|-
+|p7sign||[https://github.com/servo/nss/blob/master/cmd/p7sign/p7sign.c p7sign] -- A command to create a *detached* pkcs7 signature (over a given input file).
+|-
+|p7verify||[https://github.com/servo/nss/blob/master/cmd/p7verify/p7verify.c p7verify] -- A command to do a verification of a *detached* pkcs7 signature.
+|-
+|p11-kit||[https://p11-glue.github.io/p11-glue/p11-kit.html p11-kit] - - Provides a way to load and enumerate PKCS#11 modules. Provides a standard configuration setup for installing PKCS#11 modules in such a way that they're discoverable.
+|-
+|p11tool||[https://www.freebsd.org/cgi/man.cgi?query=p11tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html p11tool] - GnuTLS	PKCS #11 tool
+Program	that  allows  operations  on PKCS #11 smart cards and security        modules.
+|-
+|pa-info||
+|-
+|pacat||[https://www.freebsd.org/cgi/man.cgi?query=pacat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pacat]  -	Play back or record raw	or encoded audio streams on a PulseAudio sound server
+|-
+|pacmd||[https://www.freebsd.org/cgi/man.cgi?query=pacmd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pacmd] - Reconfigure a PulseAudio	sound server during runtime
+|-
+|pactl||[https://www.freebsd.org/cgi/man.cgi?query=pactl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pactl] - Control a running PulseAudio sound server
+|-
+|padsp||[https://www.freebsd.org/cgi/man.cgi?query=padsp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html padsp] starts the	specified program and redirects	its access to OSS compatible audio devices (/dev/dsp and auxiliary devices) to a  PulseAudio       sound server.
+|-
+|pages2html||
+|-
+|pages2raw||
+|-
+|pages2text||
+|-
+|pal2rgb||[https://www.freebsd.org/cgi/man.cgi?query=pal2rgb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pal2rgb] - convert a palette color TIFF image to a full color image
+|-
+|paltex||
+|-
+|pam_helper||
+|-
+|pango-list||
+|-
+|pango-view||[https://www.freebsd.org/cgi/man.cgi?query=pango-view&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pango-view] - Pango text viewer
+|-
+|paperconf||[https://www.freebsd.org/cgi/man.cgi?query=paperconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html paperconf] - print paper configuration information
+|-
+|parsetrigrams||
+|-
+|pasuspender||[https://www.freebsd.org/cgi/man.cgi?query=pasuspender&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pasuspender] is a	tool that can be used to tell a	local PulseAudio sound
+server to temporarily suspend access to the  audio  devices,  to	 allow       other  applications  access them	directly. pasuspender will suspend access to the audio devices, fork a child process,	 and  when  the	 child
+process terminates, resume access again.
+|-
+|pavucontrol||[https://www.freshports.org/audio/pavucontrol/ pavucontrol] GTK mixer for PulseAudio
+|-
+|pax11publish||[https://www.freebsd.org/cgi/man.cgi?query=pax11publish&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pax11publish] - PulseAudio X11 Credential	Utility
+|-
+|pbdemo||
+|-
+|pbinfo||
+|-
+|pbmtojbg||[https://www.freebsd.org/cgi/man.cgi?query=pbmtojbg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pbmtojbg	]- portable bitmap to JBIG1 file	converter
+|-
+|pbmtojbg85||
+|-
+|pcre2-config||[https://www.freebsd.org/cgi/man.cgi?query=pcre2-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre2-config] - program to return	PCRE2 configuration
+|-
+|pcre2grep||[https://www.freebsd.org/cgi/man.cgi?query=pcre2grep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre2grep] - a grep with Perl-compatible regular expressions.
+|-
+|pcre2test||[https://www.freebsd.org/cgi/man.cgi?query=pcre2test&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre2test] - a program for testing Perl-compatible regular expressions.
+|-
+|pcre-config||[https://www.freebsd.org/cgi/man.cgi?query=pcre-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcre-config]  returns  the configuration of the installed	PCRE libraries
+and the options required	to compile a program to	use them. Some of  the       options	apply  only  to	the 8-bit, or 16-bit, or 32-bit	libraries, respectively, and are not available if only one of	 those	libraries  has
+been built. If an unavailable option is encountered, the	"usage"	information is output.
+|-
+|pcregrep||[https://www.freebsd.org/cgi/man.cgi?query=pcregrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcregrep] - a grep with Perl-compatible regular expressions.
+|-
+|pcretest||[https://www.freebsd.org/cgi/man.cgi?query=pcretest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pcretest]	- a program for	testing	Perl-compatible	regular	expressions.
+|-
+|pdb2mdb||[https://www.freebsd.org/cgi/man.cgi?query=pdb2mdb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdb2mdb] - Program Database to Mono Debugging Symbol converter.
+|-
+|pdbedit||[https://www.freebsd.org/cgi/man.cgi?query=pdbedit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdbedit] - manage	the SAM	database (Database of Samba Users)
+|-
+|pdf2dsc||[https://www.freebsd.org/cgi/man.cgi?query=pdf2dsc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdf2dsc] - generate a PostScript page list of a PDF document
+|-
+|pdf2ps||[https://www.freebsd.org/cgi/man.cgi?query=pdf2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdf2ps] -	Ghostscript PDF	to PostScript translator
+|-
+|pdfattach||
+|-
+|pdfdetach||[https://www.freebsd.org/cgi/man.cgi?query=pdfdetach&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfdetach]  -  Portable Document Format (PDF) document embedded file extractor (version	3.03)
+|-
+|pdffonts||[https://www.freebsd.org/cgi/man.cgi?query=pdffonts&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdffonts] - Portable Document Format (PDF) font analyzer (version	3.03)
+|-
+|pdfimages||[https://www.freebsd.org/cgi/man.cgi?query=pdfimages&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfimages]  -  Portable  Document	 Format	(PDF) image extractor (version     3.03)
+|-
+|pdfinfo||[https://www.freebsd.org/cgi/man.cgi?query=pdfinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfinfo] - Portable Document Format (PDF)	document information extractor
+(version	3.03)
+|-
+|pdfmom||[https://www.freebsd.org/cgi/man.cgi?query=pdfmom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfmom] -	Produce	PDF documents using the	mom macro set
+|-
+|pdfroff||[https://www.freebsd.org/cgi/man.cgi?query=pdfroff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfroff] - create	PDF documents using groff; pdfroff is a wrapper program for	the GNU	text processing	system,	groff.        It transparently	handles	the mechanics of multiple pass groff  processing,  when  applied to suitably marked up groff source files, such that       tables of contents and body text	are formatted separately, and are subsequently  combined  in	the  correct order, for	final publication as a      single PDF document.  A further optional	"style	sheet"	capability  is       provided;  this	allows for the definition of content which is required       to precede the table of contents, in the	published document.
+|-
+|pdfseparate||[https://www.freebsd.org/cgi/man.cgi?query=pdfseparate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfseparate] extract single pages	from a Portable	Document Format	(PDF).
+|-
+|pdfsig||[https://www.freebsd.org/cgi/man.cgi?query=pdfsig&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfsig] -	Portable Document Format (PDF) digital signatures tool
+|-
+|pdftocairo||[https://www.freebsd.org/cgi/man.cgi?query=pdftocairo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftocairo]      -     Portable	  Document     Format	  (PDF)	    to
+PNG/JPEG/TIFF/PDF/PS/EPS/SVG using cairo
+|-
+|pdftohtml||[https://www.freebsd.org/cgi/man.cgi?query=pdftohtml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftohtml] - program to convert PDF files	into HTML, XML and PNG images
+|-
+|pdftoppm||[https://www.freebsd.org/cgi/man.cgi?query=pdftoppm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftoppm] - Portable Document Format (PDF) to Portable Pixmap (PPM) con-
+verter (version 3.03)
+|-
+|pdftops||[https://www.freebsd.org/cgi/man.cgi?query=pdftops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftops] - Portable Document Format (PDF) to PostScript converter (version 3.03)
+|-
+|pdftotext||[https://www.freebsd.org/cgi/man.cgi?query=pdftotext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdftotext]  -  Portable Document Format (PDF) to text converter (version     3.03)
+|-
+|pdfunite||[https://www.freebsd.org/cgi/man.cgi?query=pdfunite&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pdfunite]	- Portable Document Format (PDF) page merger
+|-
+|peas-demo||
+|-
+|pedump||
+|-
+|peglgears||
+|-
+|perl||[https://www.freebsd.org/cgi/man.cgi?query=perl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perl] - The Perl 5 language interpreter
+|-
+|perlbug||[https://www.freebsd.org/cgi/man.cgi?query=perlbug&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perlbug] - how to	submit bug reports on Perl
+|-
+|perldoc||[https://www.freebsd.org/cgi/man.cgi?query=perldoc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perldoc] - Look up Perl documentation in Pod format.
+|-
+|perlivp||[https://www.freebsd.org/cgi/man.cgi?query=perlivp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perlivp] - Perl Installation Verification	Procedure
+|-
+|perlthanks||[https://www.freebsd.org/cgi/man.cgi?query=perlthanks&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html This program] is designed	to help	you generate and send bug reports (and
+thank-you notes)	about perl5 and	the modules which ship with it.
+|-
+|permview||[https://www.freebsd.org/cgi/man.cgi?query=permview&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html permview	] -  Viewer for declarative security permission sets inside assemblies.
+|-
+|perror||[https://www.freebsd.org/cgi/man.cgi?query=perror&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html perror] -- print an	error number as	a string
+|-
+|peverify||
+|-
+|pf2afm||[https://www.freebsd.org/cgi/man.cgi?query=pf2afm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pf2afm]  - Make an AFM file from Postscript (PFB/PFA/PFM)	font files using ghostscript
+|-
+|pfbtopfa||The [https://www.freebsd.org/cgi/man.cgi?query=pfbtopfa&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pfbtopfa] utility converts PostScript Type 1 font files	from the binary PFB format to	the ASCII PFA format. It also converts any kind	of     line ending to the	UNIX style \n.
+|-
+|pfbtops||[https://www.freebsd.org/cgi/man.cgi?query=pfbtops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pfbtops] - translate a PostScript	font in	.pfb format to ASCII
+|-
+|pgon-mode||
+|-
+|phononsettings||
+|-
+|pi-make-microsoft-freecell-board||[https://www.freebsd.org/cgi/man.cgi?query=pi-make-microsoft-freecell-board&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html make-gnome-freecell-board, make-aisleriot-freecell-board,        pi-make-microsoft-freecell-board, make_pysol_freecell_board.py] -       Programs	to generate boards to be used as input to Freecell Solver.
+|-
+|pic||[https://www.freebsd.org/cgi/man.cgi?query=pic&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pic] - compile pictures for troff	or TeX
+|-
+|pic2graph||[https://www.freebsd.org/cgi/man.cgi?query=pic2graph&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pic2graph] - convert a PIC diagram into a	cropped	image
+|-
+|piconv||[https://www.freebsd.org/cgi/man.cgi?query=piconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html piconv] is perl version of iconv,	a character encoding converter widely       available for various Unixen today.  This script	was primarily a       technology demonstrator for Perl	5.8.0, but you can use piconv in the       place of	iconv for virtually any	case.
+|-
+|pidl||[https://www.freebsd.org/cgi/man.cgi?query=pidl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pidl] - An IDL compiler written in Perl
+|-
+|pinentry-gnome3||
+|-
+|pinentry-qt5||
+|-
+|pinentry-tty||
+|-
+|pixeltest||
+|-
+|pk12util||
+|-
+|pkaction||
+|-
+|pkcheck||
+|-
+|pkcs1-conv||
+|-
+|pkexec||
+|-
+|pkgdata||[https://www.freebsd.org/cgi/man.cgi?query=pkgdata&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pkgdata]	takes  a set of	data files and packages	them for use by	ICU or
+applications that use ICU. The typical reason to	 package  files	 using       pkgdata	is  to make their distribution easier and their	loading	by ICU       faster and less consuming of limited system resources such as file  descriptors.   Packaged  data  also  allow	applications to	be distributed       with fewer resource files, or even  with	 none  at  all	if  they  link      against the packaged data directly
+|-
+|pkttyagent||
+|-
+|pl2pm||[https://www.freebsd.org/cgi/man.cgi?query=pl2pm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pl2pm] is	a tool to aid in the conversion	of Perl4-style .pl library       files to	Perl5-style library modules.  Usually, your old	.pl file will       still work fine and you should only use this tool if you	plan to	update       your library to use some	of the newer Perl 5 features, such as       AutoLoading.
+|-
+|plank||[https://www.freebsd.org/cgi/man.cgi?query=plank&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Plank]  is  meant	 to be the simplest dock on the	planet.	The goal is to        provide just what a dock	needs and absolutely nothing more. It is, however,  a	 library  which	 can be	extended to create other dock programs       with more advanced features.  Thus, Plank is the	underlying  technology       for  Docky (starting in version 3.0.0) and aims to provide all the core       features	while Docky extends it to add fancier  things  like  Docklets,       painters, settings dialogs, etc.
+|-
+|plasmapkg2||[https://www.freebsd.org/cgi/man.cgi?query=plasmapkg2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html plasmapkg2] - Install, list, remove Plasma packages
+|-
+|playSIP||
+|-
+|plistutil||
+|-
+|pluma||[https://www.freebsd.org/cgi/man.cgi?query=pluma&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Pluma] - The MATE	Text Editor
+|-
+|pmd2raw||
+|-
+|pmd2svg||
+|-
+|pmd2text||
+|-
+|png-fix-itxt||
+|-
+|pngfix||
+|-
+|pngtogd||
+|-
+|pngtogd2||
+|-
+|pod2html||[https://www.freebsd.org/cgi/man.cgi?query=pod2html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2html]	- convert .pod files to	.html files
+|-
+|pod2man||[https://www.freebsd.org/cgi/man.cgi?query=pod2man&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2man] - Convert POD data to formatted *roff input
+|-
+|pod2text||[https://www.freebsd.org/cgi/man.cgi?query=pod2text&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2text]	- Convert POD data to formatted	ASCII text
+|-
+|pod2usage||[https://www.freebsd.org/cgi/man.cgi?query=pod2usage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pod2usage] - print usage messages	from embedded pod docs in files
+|-
+|podchecker||[https://www.freebsd.org/cgi/man.cgi?query=podchecker&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html podchecker] - check the syntax of	POD format documentation files
+|-
+|podselect||[https://www.freebsd.org/cgi/man.cgi?query=podselect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html podselect] - print selected sections of pod documentation	on standard       output
+|-
+|point||[https://www.freebsd.org/cgi/man.cgi?query=point&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html point]
+SYNOPSIS
+   Public Attributes
+       double x
+       double y
+       double z
+|-
+|point-clip||
+|-
+|point-param||
+|-
+|point-sprite||
+|-
+|point-wide||
+|-
+|point-wide-smooth||
+|-
+|pointblast||
+|-
+|pointcoord||
+|-
+|points||
+|-
+|polkit-action||[https://www.freebsd.org/cgi/man.cgi?query=polkit-action&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-action] - List and	modify registered PolicyKit actions
+|-
+|polkit-auth||[https://www.freebsd.org/cgi/man.cgi?query=polkit-auth&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-auth] - Manage authorizations
+|-
+|polkit-config-file-validate||[https://www.freebsd.org/cgi/man.cgi?query=polkit-config-file-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-config-file-validate] is used to verify that a given PolicyKit       configuration file is valid. If no path to a config file	is given, the       default /etc/PolicyKit/PolicyKit.conf file will be verified.
+|-
+|polkit-gnome-authorization||
+|-
+|polkit-gnome-example||
+|-
+|polkit-policy-file-validate||[https://www.freebsd.org/cgi/man.cgi?query=polkit-policy-file-validate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html polkit-policy-file-validate] - Validate a	PolicyKit policy file
+|-
+|poly||[https://www.freebsd.org/cgi/man.cgi?query=poly&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html poly] starts the Poly/ML shell. Poly/ML is an implementation of Standard       ML written by David Matthews originally at the University of  Cambridge       and maintained as a project supported by	contributors.
+|-
+|poly-flat||
+|-
+|poly-flat-clip||
+|-
+|poly-flat-unfilled-clip||
+|-
+|poly-unfilled||
+|-
+|post-grohtml||
+|-
+|ppdc||[https://www.freebsd.org/cgi/man.cgi?query=ppdc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdc] - cups ppd compiler	(deprecated)
+|-
+|ppdhtml||[https://www.freebsd.org/cgi/man.cgi?query=ppdhtml&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdhtml] - cups html summary generator (deprecated)
+|-
+|ppdi||[https://www.freebsd.org/cgi/man.cgi?query=ppdi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdi] - import ppd files (deprecated)
+|-
+|ppdmerge||[https://www.freebsd.org/cgi/man.cgi?query=ppdmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdmerge] merges two or more PPD files into a single, multi-language PPD
+file.  This program is deprecated and will be removed in	a  future  release of	CUPS.
+|-
+|ppdpo||[https://www.freebsd.org/cgi/man.cgi?query=ppdpo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppdpo] extracts UI strings from PPDC source files	and updates  either  a       GNU  gettext  or	 macOS	strings	format message catalog source file for       translation.  This program is deprecated	and will be removed in	a  future release of CUPS.
+|-
+|pphs||
+|-
+|ppm2tiff||[https://www.freebsd.org/cgi/man.cgi?query=ppm2tiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ppm2tiff] converts a file	in the PPM, PGM	and PBM	image formats to TIFF.
+|-
+|pre-grohtml||
+|-
+|precat||
+|-
+|preconv||[https://www.freebsd.org/cgi/man.cgi?query=preconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html preconv] reads files and converts	its encoding(s)	to a form GNU troff(1)
+can process, sending the	data  to  standard  output.   Currently,  this       means ASCII characters and `\[uXXXX]' entities, where `XXXX' is a hexadecimal number with four	to six digits, representing  a	Unicode	 input
+code.   Normally,  preconv should be invoked with the -k	and -K options       of groff.
+|-
+|preparetips5||[https://www.freebsd.org/cgi/man.cgi?query=preparetips5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html preparetips5] 	- extract text from tips file
+|-
+|preunzip||
+|-
+|prezip||
+|-
+|prezip-bin||
+|-
+|printafm||[https://www.freebsd.org/cgi/man.cgi?query=printafm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html printafm] - Print	the metrics from a Postscript font in AFM format using
+ghostscript
+|-
+|printcal||
+|-
+|printtarg||
+|-
+|profcheck||
+|-
+|profile2map||[https://www.freebsd.org/cgi/man.cgi?query=profile2map&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html profile2map] -- Fuse profiler output converter
+|-
+|profiles||[https://www.freebsd.org/cgi/man.cgi?query=profiles&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html profiles] - A utility to report and change SIDs in registry files
+|-
+|projtex||
+|-
+|protoc||
+|-
+|protocoltojson||
+|-
+|prove||[https://www.freebsd.org/cgi/man.cgi?query=prove&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html prove] - Run tests through a TAP harness
+|-
+|proxy||
+|-
+|prune||[https://www.freebsd.org/cgi/man.cgi?query=prune&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html prune]  reads  directed graphs in	the same format	used by	[https://www.freebsd.org/cgi/man.cgi?query=dot&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports dot(1)] and removes subgraphs rooted at nodes specified on the	command	line  via  options. These nodes themselves will not be removed, but can be given attributes	so that	they can be easily located by a	 graph	stream	editor       such  as	 [https://www.freebsd.org/cgi/man.cgi?query=gvpr&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports gvpr(1)].   prune  correctly  handles cycles, loops and	multiedges.
+|-
+|ps2ascii||[https://www.freebsd.org/cgi/man.cgi?query=ps2ascii&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2ascii]	- Ghostscript translator from PostScript or PDF	to ASCII
+|-
+|ps2epsi||[https://www.freebsd.org/cgi/man.cgi?query=ps2epsi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2epsi] - generate conforming Encapsulated PostScript
+|-
+|ps2pdf||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf] -	Convert	PostScript to PDF using	ghostscript
+|-
+|ps2pdf12||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf12] - Convert PostScript to PDF 1.2 (Acrobat 3-and-later compatible) using ghostscript
+|-
+|ps2pdf13||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf13] - Convert PostScript to	PDF 1.3	(Acrobat 4-and-later  compatible) using ghostscript
+|-
+|ps2pdf14||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdf14] - Convert PostScript to PDF 1.4 (Acrobat 5-and-later compatible) using ghostscript
+|-
+|ps2pdfwr||[https://www.freebsd.org/cgi/man.cgi?query=ps2pdfwr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2pdfwr]	 -  Convert  PostScript	 to PDF	without	specifying CompatibilityLevel, using ghostscript
+|-
+|ps2ps||[https://www.freebsd.org/cgi/man.cgi?query=ps2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ps2ps, eps2eps] -	Ghostscript PostScript "distiller"
+|-
+|ps2ps2||
+|-
+|psbook||[https://www.freebsd.org/cgi/man.cgi?query=psbook&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Psbook]  rearranges pages	from a PostScript document into	``signatures''       for printing books or booklets, creating	a new PostScript file. The input  PostScript	file should follow the Adobe Document Structuring Conventions.
+|-
+|psicc||[https://www.freebsd.org/cgi/man.cgi?query=psicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psicc] - little cms PostScript converter.
+|-
+|psktool||[https://www.freebsd.org/cgi/man.cgi?query=psktool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psktool] - GnuTLS	PSK tool,  Program	 that generates	random keys for	use with TLS-PSK. The keys are      stored in hexadecimal format in a key file.
+|-
+|psmerge||[https://www.freebsd.org/cgi/man.cgi?query=psmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psmerge] - filter	to merge several PostScript files into one
+|-
+|psnup||[https://www.freebsd.org/cgi/man.cgi?query=psnup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html psnup] - multiple	pages per sheet; Psnup  puts  multiple  logical pages onto each physical sheet of	paper.       The input PostScript file should	follow the Adobe Document  Structuring
+Conventions.
+|-
+|pspell-config||[https://www.freebsd.org/cgi/man.cgi?query=pspell-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pspell-config] displays information about	libpspell installation,	mostly
+for use in build	scripts.  Note that this script	is provided for	 backward  compatibility  with  programs  that use pspell.  Do not use as it       will eventually go away.
+|-
+|psresize||[https://www.freebsd.org/cgi/man.cgi?query=psresize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Psresize]	rescales and centres a document	on a different size of	paper.
+The  input PostScript file should follow	the Adobe Document Structuring     Conventions.
+|-
+|psselect||[https://www.freebsd.org/cgi/man.cgi?query=psselect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Psselect] selects	pages from a PostScript	document, creating a new PostScript file. The	input PostScript file should follow the	Adobe Document      Structuring Conventions.
+|-
+|pstops||[https://www.freebsd.org/cgi/man.cgi?query=pstops&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Pstops] rearranges pages from a  PostScript  document,  creating	a  new       PostScript  file.   The	input  PostScript file should follow the Adobe       Document	Structuring Conventions.  Pstops can  be  used	to  perform  a       large  number  of arbitrary re-arrangements of Documents, including arranging for printing 2-up, 4-up,	booklets, reversing,  selecting	 front       or back sides of	documents, scaling, etc.
+|-
+|ptar||[https://www.freebsd.org/cgi/man.cgi?query=ptar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ptar] - - a	tar-like program written in perl
+|-
+|ptardiff||[https://www.freebsd.org/cgi/man.cgi?query=ptardiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ptardiff] - program that diffs an	extracted archive against an       unextracted one
+|-
+|ptargrep||[https://www.freebsd.org/cgi/man.cgi?query=ptargrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ptargrep] - Apply	pattern	matching to the	contents of files in a tar       archive
+|-
+|pub2raw||
+|-
+|pub2xhtml||
+|-
+|pulseaudio||[https://www.freebsd.org/cgi/man.cgi?query=pulseaudio&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pulseaudio] - The	PulseAudio Sound System
+|-
+|pwmake||[https://www.freebsd.org/cgi/man.cgi?query=pwmake&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pwmake] -	simple tool for	generating random relatively easily pronounceable passwords
+|-
+|pwscore||[https://www.freebsd.org/cgi/man.cgi?query=pwscore&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pwscore]	is a simple tool for checking quality of a password. The password is read from stdin.
+|-
+|pydoc2.7||
+|-
+|pydoc3.6||
+|-
+|pydoc3.7||
+|-
+|pygobject-codegen-2.0||
+|-
+|pygtk-codegen-2.0||
+|-
+|pygtk-demo||
+|-
+|python2.7||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
+|-
+|python2.7-config||
+|-
+|python3.6||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
+|-
+|python3.6m||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
+|-
+|python3.6m-config||
+|-
+|python3.7||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
+|-
+|python3.7m||[https://www.freebsd.org/cgi/man.cgi?query=python2.7&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html python]  - an interpreted, interactive, object-oriented programming language
+|-
+|python3.7m-config||
+|-
+|pyuic5-3.7||
+|-
+|pyvenv-3.6||
+|-
+|pyvenv-3.7||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,020: / Line 3,537: @@
 !colspan="2"|
 |-
-|
+|qcatool-qt5||[https://www.freebsd.org/cgi/man.cgi?query=qcatool-qt5&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qcatool] is a command line tool for performing various cryptographic operations	with the Qt Cryptographic Architecture (QCA). qcatool can also       be used for testing and debugging QCA.
-|
+|-
+|qpaeq||
+|-
+|qpdf||[https://www.freebsd.org/cgi/man.cgi?query=qpdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qpdf] - PDF transformation software
+The  qpdf program is used to convert one	PDF file to another equivalent       PDF file.  It is	capable	of performing  a  variety  of  transformations       such as linearization (also known as web	optimization or	fast web viewing), encryption, and decryption	of PDF files.  It also	has  many  options  for  inspecting  or checking PDF files, some of which are	useful       primarily to PDF	developers.
+|-
+|qqwing||[https://www.freebsd.org/cgi/man.cgi?query=qqwing&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qqwing] -	A tool for generating and solving Sudoku puzzles
+|-
+|qtchooser||[https://www.freebsd.org/cgi/man.cgi?query=qtchooser&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html qtchooser] - a wrapper used to select between Qt development binary versions
+Qt is a cross-platform C++ application framework. Qt's primary  feature       is its rich set of widgets that provide standard	GUI functionality.
+|-
+|quad||
+|-
+|quad-clip||
+|-
+|quad-clip-all-vertices||
+|-
+|quad-clip-nearplane||
+|-
+|quad-degenerate||
+|-
+|quad-flat||
+|-
+|quad-offset-factor||
+|-
+|quad-offset-unfilled||
+|-
+|quad-offset-units||
+|-
+|quad-tex-2d||
+|-
+|quad-tex-3d||
+|-
+|quad-tex-alpha||
+|-
+|quad-tex-pbo||
+|-
+|quad-tex-sub||
+|-
+|quad-unfilled||
+|-
+|quad-unfilled-clip||
+|-
+|quad-unfilled-stipple||
+|-
+|quadrapassel||[https://www.freebsd.org/cgi/man.cgi?query=quadrapassel&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  Quadrapassel] - Tetris-like game for GNOME
+Quadrapassel  comes  from  the  classic falling-block game, Tetris. The       goal of the game	is to create  complete	horizontal  lines  of  blocks,       which will disappear.
+|-
+|quads||
+|-
+|quadstrip||
+|-
+|quadstrip-clip||
+|-
+|quadstrip-cont||
+|-
+|quadstrip-flat||
+|-
+|qvlc||
+|-
+|qxp2raw||
+|-
+|qxp2svg||
+|-
+|qxp2text||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,033: / Line 3,617: @@
 !colspan="2"|
 |-
-|
+|ranlib||[https://www.freebsd.org/cgi/man.cgi?query=ranlib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ar, ranlib] -- manage archives
-|
+|-
+|rapper||[https://www.freebsd.org/cgi/man.cgi?query=rapper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rapper] -	Raptor RDF parsing and serializing utility
+|-
+|rarian-example||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-config||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-extract||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-gen-uuid||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-get-cl||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-get-content-list||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-get-extended-content-list||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-get-scripts||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-install||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-migrate||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-preinstall||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-rebuild||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rarian-sk-update||[https://rarian.freedesktop.org/ Rarian] is a documentation metadata library based on the proposed Freedesktop.org spec. Rarian is a document cataloging system (formerly known as Spoon). It manages documentation metadata, as specified by the Open Source Metadata Framework (OMF). Rarian is used by the GNOME desktop.
+|-
+|rasqal-config||[https://www.freebsd.org/cgi/man.cgi?query=rasqal-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rasqal-config]  -	 script	to get information about the installed version
+of the RDF query	library
+|-
+|raw2hdf||[https://www.freebsd.org/cgi/man.cgi?query=raw2hdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html raw2hdf] -- Create an .hdf hard disk image from a	raw data file
+|-
+|raw2tiff||[https://www.freebsd.org/cgi/man.cgi?query=raw2tiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html raw2tiff]	- create a TIFF	file from a raw	data
+|-
+|ray||
+|-
+|rdfproc||The [https://www.freebsd.org/cgi/man.cgi?query=rdfproc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rdfproc] utility allows parsing, querying, manipulating and  serializing of	RDF content using the Redland RDF library.   The store-name is       a  Redland  store name, typically a short identifier.  The arguments to       command vary and	are explained in section COMMANDS below.
+|-
+|rdjpgcom||[https://www.freebsd.org/cgi/man.cgi?query=rdjpgcom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rdjpgcom] - display text comments	from a JPEG file
+|-
+|rdoc26||
+|-
+|readcd||[https://www.freebsd.org/cgi/man.cgi?query=readcd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html readcd] -	read or	write data Compact Discs or related madia
+|-
+|readelf||[https://www.freebsd.org/cgi/man.cgi?query=readelf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html readelf] --	display	information about ELF objects
+|-
+|readpix||
+|-
+|readpixels||
+|-
+|recode-sr-latin||[https://www.freebsd.org/cgi/man.cgi?query=recode-sr-latin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html recode-sr-latin] - convert Serbian text from Cyrillic to Latin script
+|-
+|redland-config||[https://www.freebsd.org/cgi/man.cgi?query=redland-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html redland-config]  - script	to get information about the installed version       of Redland
+|-
+|redland-db-upgrade||[https://www.freebsd.org/cgi/man.cgi?query=redland-db-upgrade&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html redland-db-upgrade] - upgrade older Redland databases to 0.9.12 format
+|-
+|refer||[https://www.freebsd.org/cgi/man.cgi?query=refer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html refer] - preprocess bibliographic	references for groff
+|-
+|refine||
+|-
+|reflect||
+|-
+|regdiff||[https://www.freebsd.org/cgi/man.cgi?query=regdiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regdiff] - Diff program for Windows registry files
+|-
+|registerRTSPStream||
+|-
+|regpatch||The [https://www.freebsd.org/cgi/man.cgi?query=regpatch&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regpatch] utility applies registry patches to	Windows	registry       files. The patch	files should have the same format as is	being used by       the regdiff utility and regedit32.exe from Windows.       If no patch file	is specified on	the command line, regpatch attempts to       read it from standard input.
+|-
+|regshell||[https://www.freebsd.org/cgi/man.cgi?query=regshell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regshell] is a utility that lets you browse thru a Windows registry file       as if you were using a regular unix shell to browse thru	a file system.
+|-
+|regtree||The [https://www.freebsd.org/cgi/man.cgi?query=regtree&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html regtree] utility prints out all the contents of a Windows registry       file. Subkeys are printed with one level	more indentation than their       parents.
+|-
+|renormal||
+|-
+|replace||The [https://www.freebsd.org/cgi/man.cgi?query=replace&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html replace] utility program changes strings in place in files or	on the       standard	input.
+|-
+|resgen||[https://www.freebsd.org/cgi/man.cgi?query=resgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resgen, resgen2] - Mono/CLI Resource Generator
+|-
+|resgen2||[https://www.freebsd.org/cgi/man.cgi?query=resgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resgen, resgen2] - Mono/CLI Resource Generator
+|-
+|resolve_stack_dump||[https://www.freebsd.org/cgi/man.cgi?query=resolve_stack_dump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resolve_stack_dump] - resolve numeric stack trace	dump to	symbols
+|-
+|resolveip||[https://www.freebsd.org/cgi/man.cgi?query=resolveip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resolveip] - resolve host	name to	IP address or vice versa
+|-
+|revfix||
+|-
+|rhythmbox||[https://www.freebsd.org/cgi/man.cgi?query=rhythmbox&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rhythmbox] - music player	and library for	tagged files using GStreamer; rhythmbox  is  a	 very easy to use music	playing	and management program      which supports a	wide range of audio formats (including mp3  and	 ogg).       Originally  inspired  by	 Apple's iTunes, the current version also supports Internet Radio and	Last.fm	integration, iPod syncing and  generic      portable	audio player support. Audio CD playback, ripping and encoding,       music sharing, and Podcasts.
+|-
+|rhythmbox-client||[https://www.freebsd.org/cgi/man.cgi?query=rhythmbox-client&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports rhythmbox-client]	 is a tool for controlling an already running instance      of rhythmbox.  It's useful for remote control  scripting,  adding  specific  files  to	 the  library  from  the shell,	or printing details of       what's playing. It also has an interactive mode,	useful for controlling       playback	 remotely  via ssh. Any	files specified	after the option argu    ments will be added to the library.  If the --enqueue option is	given,       the files will also be added to the play	queue.
+|-
+|ri26||
+|-
+|roff2dvi||[https://www.freebsd.org/cgi/man.cgi?query=roff2dvi&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2dvi] - transform roff code into dvi mode
+|-
+|roff2html||[https://www.freebsd.org/cgi/man.cgi?query=roff2html&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2html] - transform roff code into html mode
+|-
+|roff2pdf||[https://www.freebsd.org/cgi/man.cgi?query=roff2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2pdf] - transform roff code into pdf mode
+|-
+|roff2ps||[https://www.freebsd.org/cgi/man.cgi?query=roff2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2ps] - transform roff	code into ps mode
+|-
+|roff2text||[https://www.freebsd.org/cgi/man.cgi?query=roff2text&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2text] - transform roff code into text mode
+|-
+|roff2x||[https://www.freebsd.org/cgi/man.cgi?query=roff2x&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roff2x] -	transform roff code into x mode
+|-
+|roqet||The [https://www.freebsd.org/cgi/man.cgi?query=roqet&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html roqet] utility allows	querying of RDF	content	using the  Rasqal  RDF       query library, printing the results for variable	bindings, RDF graph or       boolean results in a variety of formats.	 The query is read from	query-URI  and	 the optional base-URI is used as the base URI of the query if       present.
+|-
+|rpcclient||[https://www.freebsd.org/cgi/man.cgi?query=rpcclient&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rpcclient] - tool	for executing client side MS-RPC functions
+|-
+|rsaperf||
+|-
+|rsvg-convert||[https://www.freebsd.org/cgi/man.cgi?query=rsvg-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rsvg-convert] - turn SVG files into raster images.
+|-
+|rsync||[https://www.freebsd.org/cgi/man.cgi?query=rsync&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rsync] - a fast, versatile, remote (and local) file-copying tool
+|-
+|ruby26||
+|-
+|run-with-aspell||[https://www.freebsd.org/cgi/man.cgi?query=run-with-aspell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html run-with-aspell] -  script to help use GNU Aspell as an ispell replacement
+|-
+|rvlc||
+|-
+|rzsh||
+|-
+|rzxcheck||[https://www.freebsd.org/cgi/man.cgi?query=rzxcheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rzxcheck] -- Check the signature in a ZX Spectrum	RZX file
+|-
+|rzxdump||[https://www.freebsd.org/cgi/man.cgi?query=rzxdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rzxdump] -- List contents	of Sinclair ZX Spectrum	input recording	files
+|-
+|rzxtool||[https://www.freebsd.org/cgi/man.cgi?query=rzxtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html rzxtool] allows some simple modifications	to  be	made  to  Sinclair  ZX       Spectrum	 input	recording  files: blocks can be	removed, snapshot data       can be extracted	or snapshots can be inserted into the file.  The  file       can also	be uncompressed.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,046: / Line 3,777: @@
 !colspan="2"|
 |-
-|
+|samba-ldbadd||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
-|
+|-
+|samba-ldbdel||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
+|-
+|samba-ldbdump||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
+|-
+|samba-ldbedit||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
+|-
+|samba-ldbmodify||
+|-
+|samba-ldbrename||
+|-
+|samba-ldbsearch||
+|-
+|samba-regedit||[https://www.freebsd.org/cgi/man.cgi?query=samba-regedit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba-regedit] - ncurses based tool to manage the	Samba registry
+|-
+|samba-tool||[https://www.freebsd.org/cgi/man.cgi?query=samba-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba-tool] - Main Samba administration tool.
+|-
+|samplers||
+|-
+|samplers_array||
+|-
+|sancov80||
+|-
+|sane-config||[https://www.freebsd.org/cgi/man.cgi?query=sane-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sane-config] - get information about the installed version of libsane
+|-
+|sane-find-scanner||[https://www.freebsd.org/cgi/man.cgi?query=sane-find-scanner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sane-find-scanner]  is a command-line tool to find SCSI and USB scanners       and determine their Unix	device files. Its primary aim is to make  sure       that scanners can be detected by	SANE backends.
+|-
+|sapWatch||
+|-
+|scan-build80||
+|-
+|scan-view80||
+|-
+|scanadf||[https://www.freebsd.org/cgi/man.cgi?query=scanadf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scanadf] is a command-line interface to control  image  acquisition  devices which are capable of returning a series of	images (e.g. a scanner       with an automatic document feeder (ADF)).  The device is	controlled via       command-line  options.  After command-line processing, scanadf normally       proceeds	to acquire a series of images until  the  device  returns  the       SANE_STATUS_NO_DOCS status code
+|-
+|scanimage||[https://www.freebsd.org/cgi/man.cgi?query=scanimage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scanimage]  is a command-line interface to control image acquisition devices such as flatbed scanners or cameras.  The	device	is  controlled       via  command-line  options.   After  command-line processing, scanimage       normally	proceeds to acquire an image.  The image data  is  written  to       standard	 output	 in  one of the	PNM (portable aNyMaP) formats (PBM for       black-and-white images, PGM for grayscale images, and PPM for color images),  TIFF  format (black-and-white, grayscale	or color), PNG format,    or JPEG format.	scanimage accesses image acquisition  devices  through      the  SANE  (Scanner Access Now Easy) interface and can thus support any     device for which	there exists a SANE backend (try apropos sane- to  get     a list of available backends).
+|-
+|scanin||
+|-
+|sccmap||[https://www.freebsd.org/cgi/man.cgi?query=sccmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sccmap]  decomposes  digraphs  into strongly connected components	and an       auxiliary map of	the relationship between  components.	In  this  map,       each  component	is  collapsed  into  a node.  The resulting graphs are       printed to standard out.	 The number of nodes, edges and	strongly  connected  components  are	printed	to standard error.  sccmap is a	way of       partitioning large graphs into more manageable pieces.
+|-
+|scgcheck||[https://www.freebsd.org/cgi/man.cgi?query=scgcheck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scgcheck] - check	and validate the ABI of	libscg
+|-
+|scl2trd||[https://www.freebsd.org/cgi/man.cgi?query=scl2trd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html scl2trd] -- Convert .scl disk images to .trd.
+|-
+|scp-dbus-service||
+|-
+|sd2raw||
+|-
+|sd2svg||
+|-
+|sd2text||
+|-
+|sdc2csv||
+|-
+|sdl2-config||
+|-
+|sdl-config||
+|-
+|sdw2html||
+|-
+|secret-tool||[https://www.freebsd.org/cgi/man.cgi?query=secret-tool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html secret-tool] is a	command	line tool that can be used to store and     retrieve	passwords.
+Each password is	stored in an item. Items are uniquely identified by a       set of attribute	keys and values. When storing a	password you must       specify unique pairs of attributes names	and values, and	when looking       up a password you provide the same attribute name and value pairs.
+|-
+|secutil||[https://www.freebsd.org/cgi/man.cgi?query=secutil&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html secutil] - Extract X.509 certificates and	strongnames from assemblies.
+|-
+|setreg||[https://www.freebsd.org/cgi/man.cgi?query=setreg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html setreg] -	Change settings	for public key cryptography
+|-
+|setxkbmap||[https://www.freebsd.org/cgi/man.cgi?query=setxkbmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html setxkbmap] - set the keyboard using the X	Keyboard Extension
+|-
+|sexp-conv||
+|-
+|sfconvert||[https://www.freebsd.org/cgi/man.cgi?query=sfconvert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sfconvert] - convert audio files
+|-
+|sfinfo||[https://www.freebsd.org/cgi/man.cgi?query=sfinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sfinfo] -	display	information about audio	files
+|-
+|sgen||[https://www.freebsd.org/cgi/man.cgi?query=sgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sgen] - Mono XML Serializer GENerator
+|-
+|sgen-grep-binprot||
+|-
+|shadow_sampler||
+|-
+|shadowtex||
+|-
+|shape||The [https://www.freebsd.org/cgi/man.cgi?query=shape&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html shape] command is used to manipulate windows so as to	make them have       non-rectangular shapes.	It also	permits	the querying  of  the  current       status  of windows to see what shape they have.
+|-
+|sharedtex||
+|-
+|sharedtex_mt||
+|-
+|sharesec||[https://www.freebsd.org/cgi/man.cgi?query=sharesec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sharesec] - Set or get share ACLs. This tool is part of the	samba(7) suite.
+|-
+|shasum||[https://www.freebsd.org/cgi/man.cgi?query=shasum&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html shasum] -	Print or Check SHA Checksums
+|-
+|shlibsign||
+|-
+|shotwell||[https://www.freebsd.org/cgi/man.cgi?query=shotwell&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html shotwell]	- Digital photo	manager
+|-
+|showchar||
+|-
+|shtest||
+|-
+|signcode||[https://www.freebsd.org/cgi/man.cgi?query=signcode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html signcode]	- Digitally sign an PE executable using	an X.509 certificate.
+|-
+|signon-ui||
+|-
+|signond||
+|-
+|signonpluginprocess||
+|-
+|signtool||
+|-
+|signver||
+|-
+|simple-mtpfs||[https://www.freebsd.org/cgi/man.cgi?query=simple-mtpfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html SIMPLE-MTPFS] - filesystem driver	for MTP	based devices
+|-
+|simplex-noise||
+|-
+|singlebuffer||
+|-
+|sip-3.7||
+|-
+|size||[https://www.freebsd.org/cgi/man.cgi?query=size&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html size] -- display section sizes and total size of ELF objects
+|-
+|skinning||
+|-
+|smbcacls||[https://www.freebsd.org/cgi/man.cgi?query=smbcacls&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbcacls]	- Set or get ACLs on an	NT file	or directory names
+This tool is part of the	samba(7) suite.
+The smbcacls program manipulates	NT Access Control Lists	(ACLs) on SMB       file shares. An ACL is comprised	zero or	more Access Control Entries       (ACEs), which define access restrictions	for a specific user or group.
+|-
+|smbclient||[https://www.freebsd.org/cgi/man.cgi?query=smbclient&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbclient] - ftp-like client to access SMB/CIFS resources	on servers. This tool is part of the	samba(7) suite.     smbclient is a client that can 'talk' to	an SMB/CIFS server. It offers       an interface similar to that of the ftp program (see ftp(1)).       Operations include things like getting files from the server to the       local machine, putting files from the local machine to the server,       retrieving directory information	from the server	and so on.
+|-
+|smbcontrol||[https://www.freebsd.org/cgi/man.cgi?query=smbcontrol&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbcontrol] - send messages to smbd, nmbd	or winbindd processes
+|-
+|smbcquotas||[https://www.freebsd.org/cgi/man.cgi?query=smbcquotas&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbcquotas] - Set	or get QUOTAs of NTFS 5	shares. This tool is part of the	samba(7) suite.       The smbcquotas program manipulates NT Quotas on SMB file	shares.
+|-
+|smbget||[https://www.freebsd.org/cgi/man.cgi?query=smbget&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbget] -	wget-like utility for download files over SMB
+|-
+|smbpasswd||[https://www.freebsd.org/cgi/man.cgi?query=smbpasswd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbpasswd] - change a user's SMB password
+|-
+|smbspool||[https://www.freebsd.org/cgi/man.cgi?query=smbspool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbspool] - send a print file to an SMB printer
+|-
+|smbstatus||[https://www.freebsd.org/cgi/man.cgi?query=smbstatus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbstatus] - report on current Samba connections
+|-
+|smbtar||[https://www.freebsd.org/cgi/man.cgi?query=smbtar&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbtar] -	shell script for backing up SMB/CIFS shares  irectly to	UNIX      tape drives
+|-
+|smbtorture||[https://www.freebsd.org/cgi/man.cgi?query=smbtorture&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbtorture] - Run	a series of tests against a SMB	server
+|-
+|smbtree||[https://www.freebsd.org/cgi/man.cgi?query=smbtree&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbtree] - A text	based smb network browser. smbtree is a smb	browser	program	in text	mode. It is similar to the       "Network	Neighborhood" found on Windows computers. It prints a tree       with all	the known domains, the servers in those	domains	and the	shares       on the servers.
+|-
+|sn||[https://www.freebsd.org/cgi/man.cgi?query=sn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sn] - Digitally sign/verify/compare strongnames on CLR assemblies.
+|-
+|snap2tzx||[https://www.freebsd.org/cgi/man.cgi?query=snap2tzx&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snap2tzx]	-- Convert ZX Spectrum snapshot	to .tzx	tape images
+|-
+|snapconv||[https://www.freebsd.org/cgi/man.cgi?query=snapconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snapconv] -- Sinclair ZX Spectrum	snapshot converter
+|-
+|snapdump||
+|-
+|sndfile-cmp||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-cmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-cmp] -- compare two	audio files
+For two files to     compare as	being the same,	their channel counts, sample rate, audio data     lengths and actual	audio data must	match.	Other differences such as     string metadata like song title, artist etc and their presence or absence     are ignored.
+|-
+|sndfile-concat||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-concat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  sndfile-concat] -- concatenate audio data from two or more audio files; sndfile-concat generates a	new output file	by concatenating the audio
+data of two or more input files. The encoding of the output file is the     encoding used in infile1.	Audio data from	the subsequent files are converted to this encoding.  The only	restriction is that the	files must     have the same number of channels.	The output file	is overwritten if it     already exists.
+|-
+|sndfile-convert||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-convert&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-convert] --	convert	sound files from one format to another:
+     wav    WAV	(Microsoft)
+     aif    AIFF (Apple/SGI)
+     au	    AU (Sun/NeXT)
+     snd    AU (Sun/NeXT)
+     raw    RAW	(header-less)
+     gsm    RAW	(header-less)
+     vox    RAW	(header-less)
+     paf    PAF	(Ensoniq PARIS,	big-endian)
+     fap    PAF	(Ensoniq PARIS,	little-endian)
+     svx    IFF	(Amiga IFF/SVX8/SV16)
+     nist   SPHERE (NIST SPeech	HEader Resources)
+     sph    SPHERE (NIST SPeech	HEader Resources)
+     voc    VOC	(Creative Labs)
+     ircam  SF (Berkeley/IRCAM/CARL)
+     sf	    SF (Berkeley/IRCAM/CARL)
+     w64    W64	(SoundFoundry WAVE 64)
+     mat    MAT4 (GNU Octave 2.0 / Matlab 4.2)
+     mat4   MAT4 (GNU Octave 2.0 / Matlab 4.2)
+     mat5   MAT5 (GNU Octave 2.1 / Matlab 5.0)
+     pvf    PVF	(Portable Voice	Format)
+     xi	    XI (FastTracker 2)
+     htk    HTK	(HMM Tool Kit)
+     sds    SDS	(Midi Sample Dump Standard)
+     avr    AVR	(Audio Visual Research)
+     wavex  WAVEX (MS WAVE with	WAVEFORMATEX)
+     sd2    SD2	(Sound Designer	II)
+     flac   FLAC (FLAC Lossless	Audio Codec)
+     caf    CAF	(Apple Core Audio File)
+     wve    WVE	(Psion Series 3)
+     prc    WVE	(Psion Series 3)
+     ogg    OGG	(OGG Container format)
+     oga    OGG	(OGG Container format)
+     mpc    MPC	(Akai MPC 2k)
+     rf64   RF64 (RIFF 64)
+|-
+|sndfile-deinterleave||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-deinterleave&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-interleave, sndfile-deinterleave] -- convert mono files into a      multi-channel file	and vice versa
+|-
+|sndfile-info||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-info&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-info] -- display information about sound files
+|-
+|sndfile-interleave||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-deinterleave&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-interleave, sndfile-deinterleave] -- convert mono files into a      multi-channel file	and vice versa
+|-
+|sndfile-metadata-get||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-metadata-get&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-metadata-get, sndfile-metadata-set]	-- get or set metadata in a     sound file
+|-
+|sndfile-metadata-set||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-metadata-get&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-metadata-get, sndfile-metadata-set]	-- get or set metadata in a     sound file
+|-
+|sndfile-play||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-play&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-play] plays	one or more sound files	on various operating systems     using standard audio output APIs.
+|-
+|sndfile-resample||
+|-
+|sndfile-salvage||[https://www.freebsd.org/cgi/man.cgi?query=sndfile-salvage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndfile-salvage] --	salvage	audio data from	WAV files longer than 4G
+Audio files using the WAV file container are inherently limited to	4G of     data size fields in the WAV header	being stored as	unsigned 32bit integers.  Many applications have trouble with	these WAV files	that are more     the 4G in size.  sndfile-salvage rewrites the WAV file into a W64 file     with the same audio content.  This	file is	overwritten if it already exists.
+|-
+|sndiod||The [https://www.freebsd.org/cgi/man.cgi?query=sndiod&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sndiod] daemon is an intermediate layer	between	audio or MIDI programs     and the hardware.	It performs the	necessary audio	processing to allow     any program to work on any	supported hardware.  By	default, sndiod	accepts connections from programs running on	the same system	only; it initializes only when	programs are using its services, allowing sndiod to     consume a negligible amount of system resources the rest of the time.     Systems with no audio hardware can	use sndiod to keep hot-pluggable devices usable by default at	virtually no cost.
+|-
+|snmp-bridge-mib||[https://www.freebsd.org/cgi/man.cgi?query=snmp-bridge-mib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmp-bridge-mib] - provide Linux bridge information via SNMP
+|-
+|snmpbulkget||[https://www.freebsd.org/cgi/man.cgi?query=snmpbulkget&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpbulkget] - communicates with a network entity	using SNMP GETBULK requests.
+|-
+|snmpbulkwalk||[https://www.freebsd.org/cgi/man.cgi?query=snmpbulkwalk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  snmpbulkwalk]  - retrieve	a subtree of management	values using SNMP GETBULK requests
+|-
+|snmpcheck||
+|-
+|snmpconf||[https://www.freebsd.org/cgi/man.cgi?query=snmpconf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpconf]	- creates and modifies SNMP configuration files
+snmpconf	 is  a	simple Perl script that	walks you through setting up a       configuration file step by step.	 It should be fairly straight  forward       to use.	Merely run it and answer its questions.
+|-
+|snmpdelta||[https://www.freebsd.org/cgi/man.cgi?query=snmpdelta&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpdelta] - Monitor delta differences in	SNMP Counter values
+|-
+|snmpdf||[https://www.freebsd.org/cgi/man.cgi?query=snmpdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpdf]  is  simply  a  networked	version	of the typical df command.  It       checks the disk space on	the remote machine by examining	 the  HOST-RE-      SOURCES-MIB's  hrStorageTable  or  the UCD-SNMP-MIB's dskTable.	By default, the hrStorageTable is preferred as it  typically	contains  more       information.   However,	the  -Cu  argument  can	be passed to snmpdf to       force the usage of the dskTable.
+|-
+|snmpget||[https://www.freebsd.org/cgi/man.cgi?query=snmpget&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpget]	is an SNMP application that uses the SNMP GET request to query       for information on a network entity.  One or  more  object  identifiers       (OIDs)  may  be	given as arguments on the command line.	 Each variable       name is given in	the format specified in	variables(5).
+|-
+|snmpgetnext||[https://www.freebsd.org/cgi/man.cgi?query=snmpgetnext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpgetnext] is an SNMP application that uses the	SNMP  GETNEXT  request       to query	for information	on a network entity.  One or more object identifiers (OIDs) may be given as arguments	on  the	 command  line.	  Each       variable	 name  is  given in the	format specified in variables(5).  For       each one, the variable that is lexicographically	"next" in  the	remote       entity's	MIB will be returned.
+|-
+|snmpnetstat||[https://www.freebsd.org/cgi/man.cgi?query=snmpnetstat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpnetstat]  -  display networking status and configuration information       from a network entity via SNMP
+|-
+|snmpset||[https://www.freebsd.org/cgi/man.cgi?query=snmpset&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpset]	is  an	SNMP application that uses the SNMP SET	request	to set       information on a	network	entity.	 One or	more object identifiers	(OIDs)       must  be	given as arguments on the command line.	 A type	and a value to       be set must accompany each object identifier.  Each  variable  name  is       given in	the format specified in	variables(5).
+|-
+|snmpstatus||[https://www.freebsd.org/cgi/man.cgi?query=snmpstatus&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpstatus]  -  retrieves	 a  fixed set of management information	from a       network entity
+|-
+|snmptable||[https://www.freebsd.org/cgi/man.cgi?query=snmptable&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptable] - retrieve an SNMP table and display it in tabular form
+|-
+|snmptest||[https://www.freebsd.org/cgi/man.cgi?query=snmptest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptest	]- communicates with a network entity using SNMP	requests
+|-
+|snmptranslate||[https://www.freebsd.org/cgi/man.cgi?query=snmptranslate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptranslate]  -	 translate  MIB	 OID names between numeric and textual       forms
+|-
+|snmptrap||[https://www.freebsd.org/cgi/man.cgi?query=snmptrap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptrap, snmpinform] - sends an SNMP notification to a manager
+|-
+|snmpusm||[https://www.freebsd.org/cgi/man.cgi?query=snmpusm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpusm] - creates and maintains SNMPv3 users on a network entity
+|-
+|snmpvacm||[https://www.freebsd.org/cgi/man.cgi?query=snmpvacm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpvacm]  -  creates and	maintains SNMPv3 View-based Access Control entries on	a network entity
+|-
+|snmpwalk||[https://www.freebsd.org/cgi/man.cgi?query=snmpwalk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpwalk	] -  retrieve a subtree of management values using SNMP GETNEXT       requests
+|-
+|soapsuds||[https://www.freebsd.org/cgi/man.cgi?query=soapsuds&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html soapsuds]	- Mono's Remoting Proxy	Generator; soapsuds	is a tool for generating WSDL documents	and client proxies for       remoting	services.  A WSDL document describes the methods that  a  service  provides  together	with XML schemas of all	referenced data	structures. A	client proxy is	a class	which offers the same methods  as  the       service it represents, but provides no implementation, it just forwards       calls to	the remote service.
+|-
+|soelim||[https://www.freebsd.org/cgi/man.cgi?query=soelim&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html soelim] -- interpret .so requests in manpages
+|-
+|[[Software Station|software-station]]||Graphical interface to get software/packages from the GhostBSD repository
+|-
+|sol||[https://www.freebsd.org/cgi/man.cgi?query=sol&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sol, solscores] -	Solitaire card game
+|-
+|solid-hardware5||
+|-
+|spd-say||
+|-
+|spdsend||
+|-
+|spec2cie||
+|-
+|specplot||
+|-
+|spectex||
+|-
+|speech-dispatcher||
+|-
+|speexdec||[https://www.freebsd.org/cgi/man.cgi?query=speexdec&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html speexdec]	- The reference	implementation speex decoder.
+Decodes a Speex file and	produce	a WAV file or raw file
+|-
+|speexenc||[https://www.freebsd.org/cgi/man.cgi?query=speexenc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html speexenc] - The reference	implementation speex encoder.
+|-
+|spellout||
+|-
+|splain||[https://www.freebsd.org/cgi/man.cgi?query=splain&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html diagnostics, splain] - produce verbose warning diagnostics; This module extends the terse diagnostics normally emitted by both the       perl compiler and the perl interpreter (from running perl with a	-w       switch or "use warnings"), augmenting them with the more	explicative       and endearing descriptions found	in perldiag.  Like the other pragmata,       it affects the compilation phase	of your	program	rather than merely the       execution phase.
+|-
+|splitti3||
+|-
+|spotread||
+|-
+|spriteblast||
+|-
+|sqlite3||[https://www.freebsd.org/cgi/man.cgi?query=sqlite3&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sqlite3] - A command line	interface for SQLite version 3
+|-
+|sqlmetal||
+|-
+|sqlobject-admin||
+|-
+|sqlobject-convertOldURI||
+|-
+|sqlsharp||[https://www.freebsd.org/cgi/man.cgi?query=sqlsharp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sqlsharp] is a Mono SQL tool used	for entering SQL queries to a database      using Mono data providers.
+|-
+|srptool||[https://www.freebsd.org/cgi/man.cgi?query=srptool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html srptool] - GnuTLS	SRP tool; Simple  program	that emulates the programs in the Stanford SRP (Secure       Remote Password)	libraries using	GnuTLS.	 It is	intended  for  use  in       places  where  you  don't  expect SRP authentication to be the used for       system users.
+|-
+|ssltap||
+|-
+|start-pulseaudio-x11||[https://www.freebsd.org/cgi/man.cgi?query=start-pulseaudio-x11&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html start-pulseaudio-x11] - PulseAudio Sound Server X11 Startup Script;
+This  script  starts pulseaudio (if not already running)	and loads modules to publish access credentials to the PulseAudio server in the  X11       root  window  and to synthesize X11 media key events on cork/uncork requests. Additionally it registers PulseAudio to the  X11	 Session  Manager.
+|-
+|startx||[https://www.freebsd.org/cgi/man.cgi?query=startx&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html startx] -	initialize an X	session; The startx script is a front end	to [https://www.freebsd.org/cgi/man.cgi?query=xinit&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports xinit(1)] that provides  a  somewhat       nicer  user interface for running a single session of the X Window System.  It	is often run with no arguments.
+|-
+|station-tweak||
+|-
+|stex3d||
+|-
+|strings||[https://www.freebsd.org/cgi/man.cgi?query=strings&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html strings] --	print the strings of printable characters in files;
+For each file specified, the strings utility prints contiguous sequences     of	printable characters that are at least n characters long and are followed by an unprintable character.	 The default value of n	is 4.  By default, the	strings	utility	only scans the initialized and loaded sections     of	ELF objects; for other file types, the entire file is scanned.	The     strings utility is	mainly used for	determining the	contents of non-text     files.
+|-
+|strip||[https://www.freebsd.org/cgi/man.cgi?query=strip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html strip] -- discard information from ELF objects; The strip utility is used to discard information from the ELF objects    specified by the arguments	file ....     If	an explicit output file	name is	not specified using the	-o option, the     strip utility will	modify its input arguments in-place.
+|-
+|strsclnt||
+|-
+|sub-tex||
+|-
+|substrings.pl||
+|-
+|sudo||[https://www.freebsd.org/cgi/man.cgi?query=sudo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sudo, sudoedit] -- execute a command as another user
+sudo allows a permitted user to execute a command as the superuser	or another user, as specified by the security policy.  The invoking user's     real (not effective) user ID is used to determine the user	name with     which to query the	security policy.
+|-
+|sudoreplay||[https://www.freebsd.org/cgi/man.cgi?query=sudoreplay&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sudoreplay]	-- replay sudo session logs
+sudoreplay	plays back or lists the	output logs created by sudo.  When replaying, sudoreplay can play the session back in real-time, or the	playback speed	may be adjusted	(faster	or slower) based on the	command	line     options.
+|-
+|svcutil||
+|-
+|svn||[https://www.freebsd.org/cgi/man.cgi?query=svn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svn] - Subversion	command	line client tool;
+Subversion  is  a  version control system, which	allows you to keep old      versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Suversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
+|-
+|svn-mergeinfo-normalizer||
+|-
+|svn-populate-node-origins-index||
+|-
+|svnadmin||[https://www.freebsd.org/cgi/man.cgi?query=svnadmin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnadmin] - Subversion repository	administration tool
+Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
+|-
+|svnauthz||
+|-
+|svnauthz-validate||
+|-
+|svnbench||
+|-
+|svnconflict||
+|-
+|svndiff||
+|-
+|svndiff3||
+|-
+|svndiff4||
+|-
+|svndumpfilter||[https://www.freebsd.org/cgi/man.cgi?query=svndumpfilter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svndumpfilter] - Filter a	subversion repository 'dumpfile'.
+Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
+|-
+|svnfsfs||
+|-
+|svnlook||[https://www.freebsd.org/cgi/man.cgi?query=svnlook&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnlook] - Subversion repository examination tool
+Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
+|-
+|svnmover||
+|-
+|svnmucc||[https://www.freebsd.org/cgi/man.cgi?query=svnmucc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnmucc] - Multiple URL Command Client for Subversion
+Subversion  is  a  version control system, which	allows you to keep old       versions	of files and directories (usually source code),	keep a log  of       who, when, and why changes occurred, etc., like CVS, RCS	or SCCS.  Subversion keeps a single copy of the master sources.  This	copy is	called       the  source  ``repository'';  it	contains all the information to	permit       extracting previous versions of those files at any time.
+|-
+|svnraisetreeconflict||
+|-
+|svnrdump||[https://www.freebsd.org/cgi/man.cgi?query=svnrdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnrdump]	- Subversion remote repository dumper and loader
+|-
+|svnserve||[https://www.freebsd.org/cgi/man.cgi?query=svnserve&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnserve] - Server for the 'svn' repository access method;
+svnserve	allows access to Subversion repositories using the svn network       protocol.  It can both run as a standalone server process,  or  it  can       run  out	 of inetd.  You	must choose a mode of operation	when you start       svnserve.
+|-
+|svnsync||[https://www.freebsd.org/cgi/man.cgi?query=svnsync&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnsync] - Subversion repository synchronization tool
+|-
+|svnversion||[https://www.freebsd.org/cgi/man.cgi?query=svnversion&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html svnversion] - Produce a compact version identifier for a working copy.
+|-
+|swapbuffers||
+|-
+|swell-foop||
+|-
+|sxpm||[https://www.freebsd.org/cgi/man.cgi?query=sxpm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sxpm]  -	Show an	XPM (X PixMap) file and/or convert XPM 1 or 2 files to       XPM 3.
+The  sxpm program can be	used to	view any XPM (version 1, 2, or 3) file       and/or to convert a file	from XPM1 or XPM2 to XPM version 3. If sxpm is       run  with any dummy option specified, the usage is displayed. If	no geometry is specified, the	show window will have the  size	 of  the  read       pixmap. Pressing	the key	Q in the window	will quit the program.
+|-
+|symcryptrun||[https://www.freebsd.org/cgi/man.cgi?query=symcryptrun&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  symcryptrun] - Call a simple symmetric encryption	tool; Sometimes simple	encryption tools are already in	use for	 a  long  time       and there might be a desire to integrate	them into the GnuPG framework.       The protocols and encryption methods might be non-standard or not  even       properly	documented, so that a full-fledged encryption tool with	an interface like gpg	is not doable.	symcryptrun provides  a	 solution:  It       operates	 by calling the	external encryption/decryption module and provides a passphrase for a	key using the standard pinentry	 based	mechanism through gpg-agent.
+|-
+|symkeyutil||
+|-
+|synclient||[https://www.freebsd.org/cgi/man.cgi?query=synclient&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html synclient]  -  commandline  utility to query and modify Synaptics	driver       options.
+This program  lets  you	change	your  Synaptics	 TouchPad  driver  for       XOrg/XFree86 server parameters while X is running.
+|-
+|syndaemon||[https://www.freebsd.org/cgi/man.cgi?query=syndaemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html syndaemon]  - a program that monitors keyboard activity and disables the      touchpad	when the keyboard is being used.
+|-
+|synthcal||
+|-
+|synthread||
+|-
+|system-config-printer||[https://www.freebsd.org/cgi/man.cgi?query=system-config-printer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html system-config-printer] - configure a CUPS	server
+system-config-printer configures	a CUPS server. It uses the CUPS	API       (bound to Python	with pycups) to	do this. The communication with	the       server is performed using IPP. As a result, it is equally able to       configure a remote CUPS server as a local one.
+|-
+|system-config-printer-applet||[https://www.freebsd.org/cgi/man.cgi?query=system-config-printer-applet&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html system-config-printer-applet] - print job	manager;
+system-config-printer-applet is a print job manager for CUPS. Normally       it will display a printer icon in the notification area,	greyed out       when there are no print jobs for	the current user. Clicking on the icon       displays	a simple print job manager for cancelling or reprinting	jobs.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,059: / Line 4,226: @@
 !colspan="2"|
 |-
-|
+|taglib-config||
-|
+|-
+|tali||[https://www.freebsd.org/cgi/man.cgi?query=tali&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tali] - A	variation on poker with	dice and less money.
+GNOME  Tali is a	sort of	poker with dice	and less money.	 You roll five       dice three times	and try	to create the best hand. Your two rerolls  may       include any or all of your dice.
+|-
+|tape2pulses||[https://www.freebsd.org/cgi/man.cgi?query=tape2pulses&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tape2pulses] -- Sinclair ZX Spectrum tape	pulse dumper;
+tape2pulses dumps the pulse information from ZX Spectrum	tape images to       text files.
+|-
+|tape2wav||[https://www.freebsd.org/cgi/man.cgi?query=tape2wav&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tape2wav]	-- Sinclair ZX Spectrum	tape to	wav audio file converter
+|-
+|tapeconv||[https://www.freebsd.org/cgi/man.cgi?query=tapeconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tapeconv] -- Sinclair ZX Spectrum	tape file converter
+|-
+|targen||
+|-
+|tbl||[https://www.freebsd.org/cgi/man.cgi?query=tbl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tbl] - format tables for troff
+This manual page	describes the GNU version of tbl, which	is part	of the       groff document formatting system.  tbl compiles descriptions of	tables       embedded	 within	troff input files into commands	that are understood by       troff.  Normally, it should be invoked using the	-t  option  of	groff.       It is highly compatible with Unix tbl.  The output generated by GNU tbl       cannot be processed with	Unix troff; it	must  be  processed  with  GNU       troff.	If  no files are given on the command line, the	standard input       will be read.  A	filename of - will cause  the  standard	 input	to  be       read.
+|-
+|tclsh8.5||
+|-
+|tclsh8.6||
+|-
+|tdbbackup||[https://www.freebsd.org/cgi/man.cgi?query=tdbbackup&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbbackup] - tool	for backing up and for validating the integrity	of       samba .tdb files
+|-
+|tdbdump||[https://www.freebsd.org/cgi/man.cgi?query=tdbdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbdump] - tool for printing the contents	of a TDB file
+|-
+|tdbrestore||[https://www.freebsd.org/cgi/man.cgi?query=tdbrestore&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbrestore] - tool for creating a	TDB file out of	a tdbdump output; This tool is part of the	samba(1) suite.       tdbrestore is a very simple utility that	'restores' the contents	of       dump file into TDB (Trivial DataBase) file. The dump file is obtained       from the	tdbdump	command.
+|-
+|tdbtool||[https://www.freebsd.org/cgi/man.cgi?query=tdbtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tdbtool] - manipulate the	contents TDB files;
+This tool is part of the	samba(1) suite.       tdbtool a tool for displaying and altering the contents of Samba	TDB       (Trivial	DataBase) files. Each of the commands listed below can be
+entered interactively or	provided on the	command	line.
+|-
+|teapot||[https://www.freebsd.org/cgi/man.cgi?query=teapot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html teapot] -- Table Editor And	Planner, Or: Teapot!
+teapot (Table Editor And Planner, Or Teapot!) is a	compact	spreadsheet     program, featuring	three dimensions with linear addressing, relative references, formula references, type safety of computations, iterative expressions and platform independent	file format.
+|-
+|telegram-desktop||[https://desktop.telegram.org/ telegram-desktop] Telegram is a cloud-based mobile and desktop messaging app with a focus on security and speed.
+|-
+|terrain||The [https://www.freebsd.org/cgi/man.cgi?query=terrain&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html terrain] program produces pseudo-terrain from	procedural noise       suitable	for use	with a BRL-CAD dsp primitive. Noise values are       computed	for the	grid points of the lattice and the resultant values       are output on the standard output as unsigned shorts in network byte       order. The size of the grid is specified	with the -w and	-n options.
+|-
+|tessdemo||
+|-
+|test_chmLib||
+|-
+|testAMRAudioStreamer||
+|-
+|testDVVideoStreamer||
+|-
+|testH264VideoStreamer||
+|-
+|testH264VideoToHLSSegments||
+|-
+|testH264VideoToTransportStream||
+|-
+|testH265VideoStreamer||
+|-
+|testH265VideoToTransportStream||
+|-
+|testMKVSplitter||
+|-
+|testMKVStreamer||
+|-
+|testMP3Receiver||
+|-
+|testMP3Streamer||
+|-
+|testMPEG1or2AudioVideoStreamer||
+|-
+|testMPEG1or2ProgramToTransportStream||
+|-
+|testMPEG1or2Splitter||
+|-
+|testMPEG1or2VideoReceiver||
+|-
+|testMPEG1or2VideoStreamer||
+|-
+|testMPEG2TransportReceiver||
+|-
+|testMPEG2TransportStreamer||
+|-
+|testMPEG2TransportStreamSplitter||
+|-
+|testMPEG2TransportStreamTrickPlay||
+|-
+|testMPEG4VideoStreamer||
+|-
+|testOggStreamer||
+|-
+|testOnDemandRTSPServer||
+|-
+|testparm||
+|-
+|testpattern||
+|-
+|testRelay||
+|-
+|testReplicator||
+|-
+|testRTSPClient||
+|-
+|testWAVAudioStreamer||
+|-
+|tex-quads||
+|-
+|texaaline||
+|-
+|texcyl||
+|-
+|texdemo1||
+|-
+|texenv||
+|-
+|teximage||
+|-
+|texture_from_pixmap||
+|-
+|textures||
+|-
+|tfmtodit||[https://www.freebsd.org/cgi/man.cgi?query=tfmtodit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tfmtodit] creates	a font file for	use with groff -Tdvi.  tfm_file	is the       name of the TeX font metric file	for the	font.  map_file	is a file giving the groff names for characters in the font;
+|-
+|th_gen_idx.pl||
+|-
+|thunar||[https://docs.xfce.org/xfce/thunar/start Thunar] File Manager
+|-
+|thunar-settings||
+|-
+|tiff2bw||[https://www.freebsd.org/cgi/man.cgi?query=tiff2bw&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiff2bw] converts an RGB	or Palette color TIFF image to a greyscale image by combining	percentages of the red,	green, and blue	channels.   By       default,	 output	 samples are created by	taking 28% of the red channel,       59% of the green	channel, and 11% of the	blue channel.  To alter	 these       percentages, the	-R, -G,	and -B options may be used.
+|-
+|tiff2pdf||[https://www.freebsd.org/cgi/man.cgi?query=tiff2pdf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiff2pdf] opens a TIFF image and	writes a PDF document to standard output.
+The program converts one	TIFF file to one PDF file, including  multiple       page  TIFF  files,  tiled  TIFF	files, black and white.	grayscale, and       color TIFF files	that contain data of TIFF photometric  interpretations       of  bilevel,  grayscale,	RGB, YCbCr, CMYK separation, and ICC L*a*b* as       supported by libtiff and	PDF.
+|-
+|tiff2ps||[https://www.freebsd.org/cgi/man.cgi?query=tiff2ps&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiff2ps] - convert a TIFF	image to PostScripttm
+|-
+|tiff2rgba||[https://www.freebsd.org/cgi/man.cgi?query=tiff2rgba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiff2rgba]  converts a wide variety of TIFF images into an RGBA TIFF image.  This includes the ability to translate different color spaces and       photometric  interpretation  into RGBA, support for alpha blending, and       translation of many different bit depths	into a 32bit RGBA image.
+|-
+|tiffcmp||[https://www.freebsd.org/cgi/man.cgi?query=tiffcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiffcmp] compares  the  tags and	data in	two files created according to       the Tagged Image	File Format, Revision 6.0.  The	schemes	used for  compressing	 data  in each file are	immaterial when	data are compared-data       are compared on a scanline-by-scanline basis after decompression.
+|-
+|tiffcp||[https://www.freebsd.org/cgi/man.cgi?query=tiffcp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffcp]  combines	 one  or more files created according to the Tag Image       File Format, Revision 6.0 into a	single TIFF file.  Because the	output       file  may  be  compressed  using	 a  different algorithm	than the input       files, tiffcp is	most often used	to convert between different  compression schemes.
+|-
+|tiffcrop||[https://www.freebsd.org/cgi/man.cgi?query=tiffcrop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiffcrop] processes one or more files created according to the Tag Image       File Format, Revision 6.0, specification	into one or more TIFF file(s).       Tiffcrop	is most	often used to extract portions of an  image  for  processing	with  bar  code	 recognizer or OCR software when that software       cannot restrict the region of interest to a specific portion of the image  or	to improve efficiency when the regions of interest must	be rotated.  It can also be used to subdivide	all or part of a processed image  into  smaller sections and export individual images	or sections of       images as separate files	or separate images within one  or  more	 files       derived from the	original input image or	images.
+|-
+|tiffdiff||
+|-
+|tiffdither||[https://www.freebsd.org/cgi/man.cgi?query=tiffdither&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffdither] - convert a greyscale	image to bilevel using dithering
+|-
+|tiffdump||[https://www.freebsd.org/cgi/man.cgi?query=tiffdump&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffdump]	- print	verbatim information about TIFF	files
+|-
+|tiffgamut||
+|-
+|tifficc||[https://www.freebsd.org/cgi/man.cgi?query=tifficc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tifficc] - little	cms ICC	profile	applier	for TIFF.
+lcms is a standalone CMM	engine,	which deals with the color management.       It implements a fast transformation between ICC profiles.   tifficc  is       little cms ICC profile applier for TIFF.
+|-
+|tiffinfo||[https://www.freebsd.org/cgi/man.cgi?query=tiffinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffinfo] - print	information about TIFF files;
+Tiffinfo	 displays information about files created according to the Tag       Image File Format, Revision 6.0.	 By default, the contents of each TIFF       directory  in  each file	is displayed, with the value of	each tag shown       symbolically (where sensible).
+|-
+|tiffmedian||[https://www.freebsd.org/cgi/man.cgi?query=tiffmedian&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffmedian]  applies  the	 median	 cut  algorithm	to an RGB image	in input.tif to generate a palette image that	is written to output.tif.  The       generated  colormap  has,  by  default, 256 entries.  The image data is       quantized by mapping each pixel to the closest color values in the colormap.
+|-
+|tiffset||[https://www.freebsd.org/cgi/man.cgi?query=tiffset&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tiffset] sets the	value of a TIFF	header to a specified value or removes       an existing setting.
+|-
+|tiffsplit||[https://www.freebsd.org/cgi/man.cgi?query=tiffsplit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tiffsplit]  takes	 a multi-directory (page) TIFF file and	creates	one or       more single-directory (page) TIFF files from it.	 The output files  are       given names created by concatenating a prefix, a	lexically ordered suffix in the range	[aaa-zzz], the suffix .tif (e.g.  xaaa.tif,  xaab.tif, ...,  xzzz.tif).	 If a prefix is	not specified on the command line, the default prefix of x is used.
+|-
+|tificc||[https://www.freebsd.org/cgi/man.cgi?query=tificc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tificc] -	little cms ICC profile applier for TIFF.
+|-
+|timage||
+|-
+|toc2cddb||[https://www.freebsd.org/cgi/man.cgi?query=toc2cddb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html toc2cddb] -  translates	a  TOC	file of	cdrdao(1) into a cddb file and       prints it to stdout
+|-
+|toc2cue||[https://www.freebsd.org/cgi/man.cgi?query=toc2cue&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html toc2cue] - converts a TOC	files of cdrdao(1) into	a .cue file
+|-
+|toFloat||
+|-
+|tomboy||[https://www.freebsd.org/cgi/man.cgi?query=tomboy&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Tomboy]  is a desktop note-taking	application for	Linux and Unix.	Simple       and easy	to use,	but with potential to help you organize	the ideas  and       information you deal with every day.
+|-
+|touchpad-edge-detector||
+|-
+|toyball||
+|-
+|tpmd||
+|-
+|tpmtool||[https://www.freebsd.org/cgi/man.cgi?query=tpmtool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tpmtool] - GnuTLS	TPM tool; Program that allows handling cryptographic data from the	TPM chip.
+|-
+|tracker||
+|-
+|transicc||[https://www.freebsd.org/cgi/man.cgi?query=transicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html transicc] - little cms ColorSpace	conversion calculator.
+|-
+|transmission-gtk||[https://www.freebsd.org/cgi/man.cgi?query=transmission-gtk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html transmission-gtk] is a fast	and easy BitTorrent client.     BitTorrent	is a peer-to-peer file transfer	protocol which uses a metainfo     file (usually with	the .torrent file extension) and a central tracker to     distribute	file data amongst a group of peers. For	more information on     the BitTorrent protocol see [http://www.bittorrent.org/ BitTorrent]
+|-
+|transpose-freecell-board.py||[https://www.freebsd.org/cgi/man.cgi?query=transpose-freecell-board.py&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html transpose-freecell-board.py] - transpose a Freecell/etc. layout from  play-stacks in text-columns to play-stacks in text lines.
+|-
+|traptoemail||[https://www.freebsd.org/cgi/man.cgi?query=traptoemail&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html traptoemail]  -  snmptrapd  handler  script  to  convert snmp traps into       emails
+|-
+|tred||[https://www.freebsd.org/cgi/man.cgi?query=tred&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tred]  computes  the transitive reduction	of directed graphs, and	prints       the resulting graphs to standard	output.	 This removes edges implied by       transitivity.   Nodes  and  subgraphs  are not otherwise	affected.  The       ``meaning'' and validity	of the reduced graphs  is  application	dependent.   tred  is	particularly useful as a preprocessor to dot to	reduce       clutter in dense	layouts.
+|-
+|tri||
+|-
+|tri-2101010||
+|-
+|tri-2101010-dlist||
+|-
+|tri-alpha||
+|-
+|tri-alpha-tex||
+|-
+|tri-array-interleaved||
+|-
+|tri-blend||
+|-
+|tri-blend-color||
+|-
+|tri-blend-max||
+|-
+|tri-blend-min||
+|-
+|tri-blend-revsub||
+|-
+|tri-blend-sub||
+|-
+|tri-clear||
+|-
+|tri-clip||
+|-
+|tri-cull||
+|-
+|tri-cull-both||
+|-
+|tri-dlist||
+|-
+|tri-edgeflag||
+|-
+|tri-edgeflag-array||
+|-
+|tri-edgeflag-pv||
+|-
+|tri-fbo||
+|-
+|tri-fbo-tex||
+|-
+|tri-fbo-tex-mip||
+|-
+|tri-flat||
+|-
+|tri-flat-clip||
+|-
+|tri-fog||
+|-
+|tri-fp||
+|-
+|tri-fp-const-imm||
+|-
+|tri-lit||
+|-
+|tri-lit-material||
+|-
+|tri-logicop-none||
+|-
+|tri-logicop-xor||
+|-
+|tri-mask-tri||
+|-
+|tri-multitex-vbo||
+|-
+|tri-orig||
+|-
+|tri-point-line-clipped||
+|-
+|tri-query||
+|-
+|tri-repeat||
+|-
+|tri-rotate||
+|-
+|tri-scissor-tri||
+|-
+|tri-square||
+|-
+|tri-stencil||
+|-
+|tri-stipple||
+|-
+|tri-tex||
+|-
+|tri-tex-1d||
+|-
+|tri-tex-3d||
+|-
+|tri-tex-stipple||
+|-
+|tri-tri||
+|-
+|tri-unfilled||
+|-
+|tri-unfilled-clip||
+|-
+|tri-unfilled-edgeflag||
+|-
+|tri-unfilled-fog||
+|-
+|tri-unfilled-point||
+|-
+|tri-unfilled-smooth||
+|-
+|tri-unfilled-tri||
+|-
+|tri-unfilled-tri-lit||
+|-
+|tri-unfilled-userclip||
+|-
+|tri-unfilled-userclip-stip||
+|-
+|tri-userclip||
+|-
+|tri-viewport||
+|-
+|tri-z||
+|-
+|tri-z-9||
+|-
+|tri-z-clip||
+|-
+|tri-z-eq||
+|-
+|trifan||
+|-
+|trifan-flat||
+|-
+|trifan-flat-clip||
+|-
+|trifan-flat-unfilled-clip||
+|-
+|trifan-unfilled||
+|-
+|trirast||
+|-
+|trispd||
+|-
+|tristrip||
+|-
+|tristrip-clip||
+|-
+|tristrip-flat||
+|-
+|troff||[https://www.freebsd.org/cgi/man.cgi?query=troff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html troff] - the troff processor of the groff	text formatting	system
+|-
+|trust||
+|-
+|ttfread||
+|-
+|tunnel||
+|-
+|tunnel2||
+|-
+|twolame||[https://www.freebsd.org/cgi/man.cgi?query=twolame&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html twolame] - an optimised MPEG Audio Layer 2 (MP2) encoder
+|-
+|twoside||
+|-
+|txt2ti3||
+|-
+|tzxlist||[https://www.freebsd.org/cgi/man.cgi?query=tzxlist&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tzxlist] -- Sinclair ZX Spectrum "real" tape file	lister
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,072: / Line 4,610: @@
 !colspan="2"|
 |-
-|
+|uchardet||[https://www.freebsd.org/cgi/man.cgi?query=uchardet&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uchardet]	- universalchardet (Universal Charset Detector)
-|
+|-
+|uconv||[https://www.freebsd.org/cgi/man.cgi?query=uconv&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uconv] - convert data from one encoding to another
+uconv converts, or transcodes, each given file (or its  standard	 input       if no file is specified)	from one encoding to another.  The transcoding       is done using Unicode as	a pivot	encoding  (i.e.	 the  data  are	 first       transcoded  from	their original encoding	to Unicode, and	then from Unicode to the destination encoding).
+|-
+|umax_pp||
+|-
+|unflatten||[https://www.freebsd.org/cgi/man.cgi?query=unflatten&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unflatten] - adjust directed graphs to improve layout aspect ratio
+|-
+|unix-lpr.sh||
+|-
+|unmunch||
+|-
+|unopkg||[https://www.freebsd.org/cgi/man.cgi?query=unopkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unopkg] -	LibreOffice Extension Manager;  LibreOffice is a	fully featured office suite for	the daily use with all       features	you would normally expect in an	office suite.
+|-
+|unzip||[https://www.freebsd.org/cgi/man.cgi?query=unzip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unzip] -- extract files from a ZIP archive
+|-
+|unzipsfx||[https://www.freebsd.org/cgi/man.cgi?query=unzipsfx&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html unzipsfx]	- self-extracting stub for prepending to ZIP archives
+|-
+|update-alternatives||[https://www.freebsd.org/cgi/man.cgi?query=update-alternatives&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html update-alternatives]  -  maintain	 symbolic  links  determining  default       commands
+|-
+|update-desktop-database||[https://www.freebsd.org/cgi/man.cgi?query=update-desktop-database&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html update-desktop-database] - Build cache database of MIME types handled by     desktop files
+|-
+|update-mime-database||[https://www.freebsd.org/cgi/man.cgi?query=update-mime-database&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html update-mime-database] - a	program	to build the Shared MIME-Info database
+cache
+|-
+|update-qtchooser-wrapper||
+|-
+|[[Update Station|update-station]]||GhostBSD graphical package update manager
+|-
+|upnpc||
+|-
+|upower||[https://www.freebsd.org/cgi/man.cgi?query=upower&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html upower] -	UPower command line tool
+upower is a simple command line client for the UPower(7)	daemon.	TODO:       not fully documented.
+|-
+|utp_recv||
+|-
+|utp_send||
+|-
+|utp_test||
+|-
+|uuidgen||[https://www.freebsd.org/cgi/man.cgi?query=uuidgen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uuidgen] --	generate universally unique identifiers;
+The uuidgen utility by default generates a	single DCE version 1 universally unique identifier (UUID), also known	as a globally unique identifier (GUID).  The UUID is written to stdout by default.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,085: / Line 4,671: @@
 !colspan="2"|
 |-
-|
+|vala-gen-introspect-0.40||
-|
+|-
+|valac-0.40||[https://www.freebsd.org/cgi/man.cgi?query=valac&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html valac]  -	 compiler  that	 translates Vala source	code into C source and       header files
+|-
+|valadoc-0.40||
+|-
+|vao_demo||
+|-
+|vapigen-0.40||[https://www.freebsd.org/cgi/man.cgi?query=vapigen&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vapigen] - generate a Vala API
+|-
+|vbc||
+|-
+|vbo||
+|-
+|vbo-drawarrays||
+|-
+|vbo-drawarrays-2101010||
+|-
+|vbo-drawelements||
+|-
+|vbo-drawrange||
+|-
+|vbo-noninterleaved||
+|-
+|vbo-tri||
+|-
+|vboxtool||[https://www.freshports.org/emulators/vboxtool vboxtool] provides effective control of VirtualBox machines
+|-
+|vert-or-frag-only||
+|-
+|vert-tex||
+|-
+|vertexrate||
+|-
+|vfstest||[https://www.freebsd.org/cgi/man.cgi?query=vfstest&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vfstest] - tool for testing samba	VFS modules
+|-
+|vfychain||
+|-
+|vfyserv||
+|-
+|viewgam||
+|-
+|vim||[https://www.freebsd.org/cgi/man.cgi?query=vim&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vim] - Vi	IMproved, a programmers	text editor
+Vim  is a text editor that is upwards compatible	to Vi.	It can be used       to edit all kinds of plain text.	 It is especially useful  for  editing       programs
+|-
+|vimdot||[https://www.freebsd.org/cgi/man.cgi?query=vimdot&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vimdot] -	Combined text editor and dot viewer
+vimdot  is  a simple script which launches the gvim or vim editor along       with a GUI window showing the dot output	of the edited file.   The  dot       output  window  automatically  refreshes	everytime the file is saved in       the editor.
+|-
+|vimtutor||[https://www.freebsd.org/cgi/man.cgi?query=vimtutor Vimtutor]	starts the Vim tutor.  It copies the tutor file	first, so that       it can be modified without changing the original	file.       The Vimtutor is useful for people that want to learn  their  first  Vim       commands.
+|-
+|visualinfo||
+|-
+|[https://www.videolan.org/vlc/index.de.html vlc]||[https://www.freebsd.org/cgi/man.cgi?query=vlc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vlc, qvlc, svlc,	nvlc, rvlc, cvlc] - the VLC media player
+|-
+|vlc-wrapper||[https://www.freebsd.org/cgi/man.cgi?query=vlc-wrapper&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vlc-wrapper] - a wrapper to drop privileges with VLC
+|-
+|vmmouse_detect||[https://www.freebsd.org/cgi/man.cgi?query=vmmouse_detect&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vmmouse_detect]  is a tool for detecting if running in a VMware environment where vmmouse is used.  It exits with a 0 return value if the  vmmouse client is enabled,	and 1 if not.
+|-
+|vobStreamer||[http://www.live555.com/vobStreamer/ vobStreamerTM] - a network DVD player application
+|-
+|vp-array||
+|-
+|vp-array-hf||
+|-
+|vp-array-int||
+|-
+|vp-clip||
+|-
+|vp-line-clip||
+|-
+|vp-tri||
+|-
+|vp-tri-cb||
+|-
+|vp-tri-cb-pos||
+|-
+|vp-tri-cb-tex||
+|-
+|vp-tri-imm||
+|-
+|vp-tri-invariant||
+|-
+|vp-tri-swap||
+|-
+|vp-tri-tex||
+|-
+|vp-unfilled||
+|-
+|vpxdec||
+|-
+|vpxenc||
+|-
+|vsd2raw||
+|-
+|vsd2text||
+|-
+|vsd2xhtml||
+|-
+|vsraytrace||
+|-
+|vss2raw||
+|-
+|vss2text||
+|-
+|vss2xhtml||
+|-
+|vte||The [https://www.freebsd.org/cgi/man.cgi?query=vte&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vte] device driver provides support for	RDC R6040 Fast Ethernet	controller which is commonly found on	Vortex86 System	On a Chip (SoC).
+|-
+|vte-2.91||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,098: / Line 4,796: @@
 !colspan="2"|
 |-
-|
+|wasm-ld80||
-|
+|-
+|watchgnupg||[https://www.freebsd.org/cgi/man.cgi?query=watchgnupg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html watchgnupg] - Read and print logs	from a socket;
+Most  of	the main utilities are able to write their log files to	a Unix       Domain socket if	configured that	way.  watchgnupg is a simple  listener       for  such  a  socket.   It ameliorates the output with a	time stamp and       makes sure that long lines are not interspersed with  log  output  from       other utilities.	 This tool is not available for	Windows.
+|-
+|wayland-scanner||
+|-
+|wbinfo||[https://www.freebsd.org/cgi/man.cgi?query=wbinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wbinfo] -	Query information from winbind daemon
+|-
+|WebKitWebDriver||
+|-
+|webpinfo||
+|-
+|webpmux||[https://www.freebsd.org/cgi/man.cgi?query=webpmux&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html webpmux] - create	animated WebP files from non-animated WebP images, extract frames from animated WebP images, and  manage  XMP/EXIF  metadata     and ICC profile.
+|-
+|webpng||
+|-
+|wincopy||
+|-
+|winpos||
+|-
+|wish8.5||
+|-
+|wish8.6||
+|-
+|wks2csv||
+|-
+|wks2raw||
+|-
+|wks2text||
+|-
+|wmctrl||[https://www.freebsd.org/cgi/man.cgi?query=wmctrl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wmctrl] -	interact with a	EWMH/NetWM compatible X	Window Manager.
+wmctrl  is a command that can be	used to	interact with an X Window manager that is compatible with the	EWMH/NetWM specification.  wmctrl  can       query  the window manager for information, and it can request that certain window management actions be taken.
+|-
+|wmf2eps||
+|-
+|wmf2fig||
+|-
+|wmf2gd||
+|-
+|wmf2svg||
+|-
+|wmf2x||
+|-
+|woff2_compress||
+|-
+|woff2_decompress||
+|-
+|woff2_info||
+|-
+|word-list-compress||[https://www.freebsd.org/cgi/man.cgi?query=word-list-compress&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html word-list-compress] compresses or	decompresses sorted word lists for use       with the	GNU Aspell spell checker.
+|-
+|wordforms||
+|-
+|wordlist2hunspell||
+|-
+|wpd2html||
+|-
+|wpd2raw||
+|-
+|wpd2text||
+|-
+|wpg2raw||
+|-
+|wpg2svg||
+|-
+|wpg2svgbatch.pl||
+|-
+|wps2html||
+|-
+|wps2raw||
+|-
+|wps2text||
+|-
+|wrjpgcom||[https://www.freebsd.org/cgi/man.cgi?query=wrjpgcom&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wrjpgcom] reads	the  named JPEG/JFIF file, or the standard input if no     file is named, and generates a new JPEG/JFIF file on  standard  output.       A comment block is added	to the file.
+|-
+|wsdl||[https://www.freebsd.org/cgi/man.cgi?query=wsdl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wsdl]  is	a tool for generating proxy classes that can be	used to	access       to web services.	 The tool reads	a WSDL document	from the provided path       or  url,	 and  downloads	 referenced schemas or other WSDL documents if       needed.
+|-
+|wsdl2||[https://www.freebsd.org/cgi/man.cgi?query=wsdl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html wsdl]  is	a tool for generating proxy classes that can be	used to	access       to web services.	 The tool reads	a WSDL document	from the provided path       or  url,	 and  downloads	 referenced schemas or other WSDL documents if       needed.
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,110: / Line 4,890: @@
 !colspan="2"|
 |-
-|
+|x86_64-portbld-freebsd12.1-c++9||
-|
+|-
+|x86_64-portbld-freebsd12.1-g++9||
+|-
+|x86_64-portbld-freebsd12.1-gcc9||
+|-
+|x86_64-portbld-freebsd12.1-gcc-9.3.0||
+|-
+|x86_64-portbld-freebsd12.1-gcc-ar9||
+|-
+|x86_64-portbld-freebsd12.1-gcc-nm9||
+|-
+|x86_64-portbld-freebsd12.1-gcc-ranlib9||
+|-
+|x86_64-portbld-freebsd12.1-gfortran9||
+|-
+|x265||
+|-
+|x509-parser||
+|-
+|xauth||The [https://www.freebsd.org/cgi/man.cgi?query=xauth&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  xauth] program is used to edit and display the authorization	information used in connecting to the	X server.   This  program  is  usually       used  to	 extract authorization records from one	machine	and merge them       in on another (as is the	case when using	remote logins or granting  access to other users).  Commands (described below) may be	entered	interactively, on the	xauth command line, or in  scripts.   Note  that  this       program	does not contact the X server except when the generate command       is used.	 Normally xauth	is not used to create the authority file entry       in  the first place; the	program	that starts the	X server (often	xdm or     startx) does that.
+|-
+|xbuild||[https://www.freebsd.org/cgi/man.cgi?query=xbuild&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xbuild]  can be used to build MSBuild project files. Integrated Development Environments like MonoDevelop and "Microsoft Visual	 Studio	 .NET"       use msbuild project file	format.
+|-
+|xcam||[https://www.freebsd.org/cgi/man.cgi?query=xcam&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xcam] - a	graphical camera frontend for SANE
+xcam  provides  a graphical user-interface to control an	image acquisition device such	as a flatbed scanner or	a camera.  It allows  scanning      invidual	images and can be invoked directly from	the command-line.
+xcam  acts  as  a  stand-alone  program that saves acquired images in a       suitable	PNM format (PBM	for black-and-white images, PGM	for  grayscale       images, and PPM for color images).
+|-
+|xconfig||
+|-
+|xdg-desktop-icon||[https://www.freebsd.org/cgi/man.cgi?query=xdg-desktop-icon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-desktop-icon] - command line tool for	(un)installing icons to	the       desktop
+The xdg-desktop-icon program can	be used	to install an application       launcher	or other file on the desktop of	the current user.
+An application launcher is represented by a *.desktop file. Desktop       files are defined by the	freedesktop.org	Desktop	Entry Specification.       The most	important aspects of *.desktop files are summarized below.
+|-
+|xdg-desktop-menu||[https://www.freebsd.org/cgi/man.cgi?query=xdg-desktop-menu&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-desktop-menu] - command line tool for	(un)installing desktop menu       items [https://www.freedesktop.org/wiki/Specifications/menu-spec/ hpmepage]
+|-
+|xdg-email||[https://www.freebsd.org/cgi/man.cgi?query=xdg-email&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-email] - command line	tool for sending mail using the	user's       preferred e-mail	composer
+|-
+|xdg-icon-resource||[https://www.freebsd.org/cgi/man.cgi?query=xdg-icon-resource&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-icon-resource] - command line	tool for (un)installing	icon resources
+|-
+|xdg-mime||[https://www.freebsd.org/cgi/man.cgi?query=xdg-mime&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-mime]	- command line tool for	querying information about file	type       handling	and adding descriptions	for new	file types
+|-
+|xdg-open||[https://www.freebsd.org/cgi/man.cgi?query=xdg-open&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-open] - opens	a file or URL in the user's preferred application
+|-
+|xdg-screensaver||[https://www.freebsd.org/cgi/man.cgi?query=xdg-screensaver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-screensaver] - command line tool for controlling the screensaver
+|-
+|xdg-settings||[https://www.freebsd.org/cgi/man.cgi?query=xdg-settings&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-settings] - get various settings from	the desktop environment
+|-
+|xdg-user-dir||[https://www.freebsd.org/cgi/man.cgi?query=xdg-user-dir&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-user-dir] looks up the current path for one of the special XDG user       dirs.
+|-
+|xdg-user-dirs-update||[https://www.freebsd.org/cgi/man.cgi?query=xdg-user-dirs-update&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xdg-user-dirs-update] updates the	current	state of the users       user-dirs.dir.
+|-
+|xdpyinfo||[https://www.freebsd.org/cgi/man.cgi?query=xdpyinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Xdpyinfo] is a utility for displaying information	about an X server.  It       is  used	to examine the capabilities of a server, the predefined	values       for various parameters used in communicating between  clients  and  the       server,	and the	different types	of screens and visuals that are	available.
+|-
+|xeglgears||
+|-
+|xeglthreads||
+|-
+|xfce4-about||
+|-
+|xfce4-panel||
+|-
+|xfce4-popup-applicationsmenu||
+|-
+|xfce4-popup-directorymenu||
+|-
+|xfce4-popup-windowmenu||
+|-
+|xfconf-query||
+|-
+|xfont||
+|-
+|xft-config||
+|-
+|xgettext||[https://www.freebsd.org/cgi/man.cgi?query=xgettext&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xgettext] - extract gettext strings from source
+|-
+|xicclu||
+|-
+|xinit||[https://www.freebsd.org/cgi/man.cgi?query=xinit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xinit] - X Window	System initializer
+The xinit program is used to start the X	Window	System	server	and  a       first  client  program  on systems that are not using a display manager       such as xdm(1) or in environments that  use  multiple  window  systems.       When  this  first  client  exits, xinit will kill the X server and then       terminate.
+|-
+|xkbcomp||The [https://www.freebsd.org/cgi/man.cgi?query=xkbcomp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xkbcomp]  keymap  compiler  converts	a description of an XKB	keymap       into one	of several output formats.   The most common use  for  xkbcomp       is  to create a compiled	keymap file (.xkm extension) which can be read       directly	by XKB-capable X servers or utilities.	 The  keymap  compiler       can  also  produce  C  header  files or XKB source files.  The C	header       files produced by xkbcomp can be	included by  X	servers	 or  utilities       that  need a built-in default keymap.  The XKB source files produced by       xkbcomp are fully resolved and can be used to  verify  that  the	 files       which typically make up an XKB keymap are merged	correctly or to	create       a single	file which contains a complete description of the keymap.
+|-
+|xkeystone||
+|-
+|xml2-config||[https://www.freebsd.org/cgi/man.cgi?query=xml2-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xml-config]  -  script to	get information	about the installed version of       GNOME-XML
+|-
+|xml2po||[https://www.freebsd.org/cgi/man.cgi?query=xml2po&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xml2po] -	program	to create a PO-template	file from a DocBook XML	file       and merge it back into a	(translated) XML file
+|-
+|xmlcatalog||[https://www.freebsd.org/cgi/man.cgi?query=xmlcatalog&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlcatalog] - Command line tool to parse and manipulate XML or SGML       catalog files.
+|-
+|xmlcatmgr||[https://www.freebsd.org/cgi/man.cgi?query=xmlcatmgr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlcatmgr] is a utility used to manipulate SGML and	XML catalogs.  It is     designed with simplicity in mind: it does not depend on external programs     nor libraries.  This manpage corresponds to xmlcatmgr version 2.2.
+|-
+|xmllint||The [https://www.freebsd.org/cgi/man.cgi?query=xmllint&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmllint] program parses one or more XML files, specified on the
+command line as XML-FILE	(or the	standard input if the filename       provided	is - ).	It prints various types	of output, depending upon the       options selected. It is useful for detecting errors both	in XML code       and in the XML parser itself.
+|-
+|xmlsec1||[https://www.freebsd.org/cgi/man.cgi?query=xmlsec1&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlsec]  is  a  command line tool	for signing, verifying,	encrypting and       decrypting XML documents.
+|-
+|xmlsec1-config||[https://www.freebsd.org/cgi/man.cgi?query=xmlsec1-config&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlsec1-config] -	detail installed version of xmlsec library
+|-
+|xmlwf||[https://www.freebsd.org/cgi/man.cgi?query=xmlwf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmlwf] - Determines if an	XML document is	well-formed
+|-
+|xmodmap||The [https://www.freebsd.org/cgi/man.cgi?query=xmodmap&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xmodmap] program is used to edit and display the  keyboard  modifier       map  and	 keymap	 table that are	used by	client applications to convert       event keycodes into keysyms.  It	is usually run from the	user's session       startup script to configure the keyboard	according to personal tastes.
+|-
+|Xorg||[https://www.freebsd.org/cgi/man.cgi?query=Xorg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Xorg]  is	a full featured	X server that was originally designed for UNIX       and UNIX-like operating systems running on Intel	x86 hardware.  It  now       runs on a wider range of	hardware and OS	platforms.
+|-
+|Xorg.wrap||
+|-
+|xprop||The [https://www.freebsd.org/cgi/man.cgi?query=xprop&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xprop] utility is for	displaying window and font properties in an  X       server.	 One  window  or font is selected using	the command line arguments or	possibly in the	case of	a window, by clicking on  the  desired       window.	 A  list of properties is then given, possibly with formatting       information.
+|-
+|xpstojpeg||
+|-
+|xpstopdf||
+|-
+|xpstopng||
+|-
+|xpstops||
+|-
+|xpstosvg||
+|-
+|xrandr||[https://www.freebsd.org/cgi/man.cgi?query=xrandr&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xrandr] -	primitive command line interface to RandR extension
+Xrandr is used to set the size, orientation and/or  reflection  of  the       outputs for a screen. It	can also set the screen	size.
+If  invoked  without any	option,	it will	dump the state of the outputs,       showing the existing modes for each of them, with a '+' after the  preferred modes and	a '*' after the	current	mode.
+There  are  a  few global options. Other	options	modify the last	output       that is specified in earlier parameters in the command  line.  Multiple       outputs	may  be	modified at the	same time by passing multiple --output       options followed	immediately by their corresponding modifying options.
+|-
+|xrdb||[https://www.freebsd.org/cgi/man.cgi?query=xrdb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Xrdb]  is	 used to get or	set the	contents of the	RESOURCE_MANAGER property on the root	window of screen 0, or the  SCREEN_RESOURCES  property       on  the root window of any or all screens, or everything	combined.  You       would normally run this program from your X startup file.
+|-
+|xrotfontdemo||
+|-
+|xsane||[https://www.freebsd.org/cgi/man.cgi?query=xsane&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsane] provides a	graphical user-interface to control an image  acquisition  device such as a flatbed scanner.	It allows previewing and scanning individual images and can be invoked either	directly from the command-line  or through The GIMP image manipulation program.  In the former case, xsane acts as a stand-alone program that saves	 acquired  images  in	a suitable PNM format (PBM for black-and-white images, PGM for       grayscale images, and PPM for color images) or converts	the  image  to       JPEG,  PNG,  PS	or  TIFF.  In the latter case, the images are directly       passed to The GIMP for further processing.
+|-
+|xscanimage||[https://www.freebsd.org/cgi/man.cgi?query=xscanimage&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xscanimage] provides a graphical userinterface to control an image  acquisition device	such as	a flatbed scanner or a camera.	It allows previewing and scanning invidual images and	can be invoked either directly       from  the  command-line or through The GIMP image manipulation program.       In the former case, xscanimage acts as a	stand-alone program that saves       acquired	 images	 in a suitable PNM format (PBM for black-and-white images, PGM for grayscale images, and PPM for color images).  In the latter  case,  the images are directly passed to The GIMP for further processing.
+|-
+|xsd||[https://www.freebsd.org/cgi/man.cgi?query=xsd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsd]  is a tool for intended to complement the XML serialization support     of Mono.	It can do the following	tasks:
+|-
+|xset||[https://www.freebsd.org/cgi/man.cgi?query=xset&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xset] - user preference utility for X
+This program is used to set various user	preference options of the display.
+|-
+|xslt-config||
+|-
+|xsltproc||[https://www.freebsd.org/cgi/man.cgi?query=xsltproc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsltproc] is a command line tool for applying XSLT stylesheets to	XML       documents. It is	part of	libxslt(3), the	XSLT C library for GNOME.       While it	was developed as part of the GNOME project, it can operate       independently of	the GNOME desktop.
+|-
+|xsubpp||[https://www.freebsd.org/cgi/man.cgi?query=xsubpp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xsubpp] -	compiler to convert Perl XS code into C	code
+This compiler is	typically run by the makefiles created by       ExtUtils::MakeMaker or by Module::Build or other	Perl module build       tools.
+xsubpp will compile XS code into	C code by embedding the	constructs       necessary to let	C functions manipulate Perl values and creates the       glue necessary to let Perl access those functions.  The compiler	uses       typemaps	to determine how to map	C function parameters and variables to       Perl values.
+|-
+|xxd||[https://www.freebsd.org/cgi/man.cgi?query=xxd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html xxd] - make a hexdump or do the reverse.
+|-
+|xxhsum||
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,123: / Line 5,062: @@
 !colspan="2"|
 |-
-|
+|yat2m||
-|
+|-
+|yelp||[https://www.freshports.org/x11/yelp yelp] Help browser for the GNOME 3 desktop
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
@@ Line 1,136: / Line 5,078: @@
 !colspan="2"|
 |-
-|
+|zeitgeist-daemon||[https://www.freebsd.org/cgi/man.cgi?query=zeitgeist-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zeitgeist-daemon] is daemon providing an	activity log. That is, it consists of	a central database for events such as file usage, browser history, calendar entries, etc.
-|
+|-
+|zeitgeist-datahub||[https://www.freebsd.org/cgi/man.cgi?query=zeitgeist-datahub&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zeitgeist-datahub] - passive loggers for Zeitgeist
+|-
+|zenity||[https://www.freebsd.org/cgi/man.cgi?query=zenity&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zenity]  is a program that will display GTK+ dialogs, and	return (either  in the return code, or on standard output) the users input. This	allows    you to present information, and ask for information from	the user, from   all manner of shell scripts.
+|-
+|zim||[https://www.freebsd.org/cgi/man.cgi?query=zim&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zim] - A Desktop Wiki Editor
+|-
+|zip||[https://www.freebsd.org/cgi/man.cgi?query=zip&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zip] - package and compress (archive) files
+|-
+|zipcloak||[https://www.freebsd.org/cgi/man.cgi?query=zipcloak&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipcloak] - encrypt entries in a zipfile
+|-
+|zipcmp||[https://www.freebsd.org/cgi/man.cgi?query=zipcmp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipcmp] compares the zip archives or directories archive1 and archive2 and  checks if they contain the	same files, comparing their names, uncompressed sizes, and	CRCs.  File order and compressed size differences are     ignored.
+|-
+|zipdetails||[https://www.freebsd.org/cgi/man.cgi?query=zipdetails&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Zipdetails] displays information about the internal record structure of        the zip file. It	is not concerned with displaying any details of	the       compressed data stored in the zip file.
+|-
+|zipgrep||[https://www.freebsd.org/cgi/man.cgi?query=zipgrep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipgrep] - search	files in a ZIP archive for lines matching a pattern
+|-
+|zipinfo||[https://www.freebsd.org/cgi/man.cgi?query=zipinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipinfo] - list detailed information about a ZIP archive
+|-
+|zipmerge||[https://www.freebsd.org/cgi/man.cgi?query=zipmerge&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipmerge] merges the source	zip archives source-zip	into the target	zip
+archive target-zip.  By default, files in the source zip archives over  write existing files of the same name in the target zip archive.
+|-
+|zipnote||[https://www.freebsd.org/cgi/man.cgi?query=zipnote&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipnote]	-  write  the comments in zipfile to stdout, edit comments and
+rename files in zipfile
+|-
+|zipsplit||[https://www.freebsd.org/cgi/man.cgi?query=zipsplit&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zipsplit] - split	a zipfile into smaller zipfiles
+|-
+|ziptool||[https://www.freebsd.org/cgi/man.cgi?query=ziptool&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ziptool] modifies the zip archive zip-archive according to the commands
+given.
+|-
+|zlib_decompress||[https://dev.mysql.com/doc/refman/8.0/en/zlib-decompress.html zlib_decompress] — Decompress mysqlpump ZLIB-Compressed Output
+|-
+|zlib-flate||The [https://www.freebsd.org/cgi/man.cgi?query=zlib-flate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zlib-flate] program is part of the qpdf package.
+|-
+|zmf2raw||[https://www.mankier.com/1/zmf2raw zmf2raw] is used to test libzmf.
+|-
+|zmf2svg||[https://www.mankier.com/1/zmf2svg zmf2svg] converts Zoner Draw documents to SVG.
+|-
+|zsh||[https://www.freebsd.org/cgi/man.cgi?query=zsh&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html zsh] - the Z shell
+|-
+|zsh-5.8||[https://www.reddit.com/r/zsh/comments/f4nppx/zsh_58_released/ zsh-5.8]
+|-
+!colspan="2"|'''Back to ''' [[image:Icon Disti GhostBSD.png|50px|link|link=/usr/local/bin/#Introduction]] '''Top'''
 |}
 [[Category:Sysutils]]