Difference between revisions of "/usr/bin/"

Revision as of 13:25, 13 February 2020

Welcome to /usr/bin/.

This page is in maintenance!
Please do not change this page without to contact the author or use Discussion!

Directory	Description
/usr/bin/addr2line	The addr2line utility translates program addresses specified by the command line arguments hexaddress to their corresponding source file names and line numbers. If no arguments are given to addr2line, it will read these addresses from standard input.
/usr/bin/alias	a shell built-in command The shell maintains a list of aliases which can be set, unset and printed by the alias and unalias commands. See [1]
/usr/bin/apply	[The apply utility runs the named command on each argument argument in turn.
/usr/bin/apropos	The apropos and whatis utilities query manual page databases generated by makewhatis(8), evaluating expression for each file in each database. By default, they display the names, section numbers, and description lines of all matching manuals.
/usr/bin/ar	The ar utility creates and maintains groups of files combined into an ar chive. Once an archive has been created, new files can be added to it, and existing files can be extracted, deleted or replaced.
/usr/bin/as	AS the portable GNU assembler
/usr/bin/asa	The asa utility reads files sequentially, mapping FORTRAN carriage-control characters to line-printer control sequences, and writes them to the standard output.
/usr/bin/asn1_compile	The ASN.1 library contains routines to handle ASN.1 encoding for SNMP. It supports only the restricted form of ASN.1 as required by SNMP.
/usr/bin/at	The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/atq	The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/atrm	The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/awk	awk scans each input file for lines that match any of a set of patterns specified literally in prog or in one or more files specified as -f progfile. With each pattern there can be an associated action that will be performed when a line of a file matches the pattern.
/usr/bin/b64decode	[2] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag specified. The b64decode utility is synonymous with uudecode with the -m flag specified.
/usr/bin/b64encode	[3] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag specified. The b64decode utility is synonymous with uudecode with the -m flag specified.
/usr/bin/banner	Banner prints a large, high quality banner on the standard output. If the message is omitted, it prompts for and reads one line of its standard input.
/usr/bin/basename	basename, dirname return filename or directory portion of pathname
/usr/bin/batch	The at and batch utilities read commands from standard input or a specified file which are to be executed at a later time, using sh(1).
/usr/bin/bc	bc is an interactive processor for a language which resembles C but pro vides unlimited precision arithmetic. It takes input from any expressions on the command line and any files given, then reads the standard input.
/usr/bin/bg	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/biff	The biff utility informs the system whether you want to be notified on your terminal when mail arrives.
/usr/bin/brandelf	The brandelf utility marks an ELF binary to be run under a certain ABI for FreeBSD.
/usr/bin/bsdcat	bsdcat typically takes a filename as an argument or reads standard input when used in a pipe. In both cases decompressed data it written to standard output.
/usr/bin/bsdcpio	cpio copies files between archives and directories. This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom images and can create tar, pax, cpio, ar, and shar archives.
/usr/bin/bsdiff	The bsdiff utility compares oldfile to newfile and writes to patchfile a binary patch suitable for use by bspatch(1). When ldfile and newfile are two versions of an executable program, the patches produced are on average a factor of five smaller than those produced by any other binary patch tool known to the author.
/usr/bin/bsdtar
/usr/bin/bsnmpget
/usr/bin/bsnmpset
/usr/bin/bsnmpwalk
/usr/bin/bspatch
/usr/bin/bthost
/usr/bin/btsockstat
/usr/bin/bunzip2
/usr/bin/byacc
/usr/bin/bzcat
/usr/bin/bzegrep
/usr/bin/bzfgrep
/usr/bin/bzgrep
/usr/bin/bzip2
/usr/bin/bzip2recover
/usr/bin/bzless
/usr/bin/c89
/usr/bin/c99
/usr/bin/caesar
/usr/bin/cal
/usr/bin/calenda
/usr/bin/cap_mkdb
/usr/bin/CC
/usr/bin/cd	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/chat
/usr/bin/chfn
/usr/bin/chgrp
/usr/bin/chkey
/usr/bin/chpass
/usr/bin/chsh
/usr/bin/cksum
/usr/bin/clear
/usr/bin/cmp
/usr/bin/col
/usr/bin/colldef
/usr/bin/colrm
/usr/bin/column
/usr/bin/comm
/usr/bin/command	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/compile_et	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/compress
/usr/bin/cpio
/usr/bin/cpp
/usr/bin/cpuset
/usr/bin/crontab
/usr/bin/crunchgen
/usr/bin/crunchide
/usr/bin/crypt
/usr/bin/csplit
/usr/bin/ctags
/usr/bin/ctfconvert
/usr/bin/ctfdump
/usr/bin/ctfmerge
/usr/bin/ctlstat
/usr/bin/cu
/usr/bin/cut
/usr/bin/dc
/usr/bin/dialog
/usr/bin/diff
/usr/bin/diff3
/usr/bin/dirname	basename, dirname return filename or directory portion of pathname
/usr/bin/dpv
/usr/bin/drill
/usr/bin/dtc
/usr/bin/du
/usr/bin/edit
/usr/bin/ee
/usr/bin/egrep
/usr/bin/elf2aout
/usr/bin/elfdump
/usr/bin/enigma
/usr/bin/env
/usr/bin/etdump
/usr/bin/ex
/usr/bin/expand
/usr/bin/factor
/usr/bin/false	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/fc	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/fetch
/usr/bin/fg	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/fgrep
/usr/bin/file
/usr/bin/file2c
/usr/bin/find
/usr/bin/finger
/usr/bin/flex
/usr/bin/flex++
/usr/bin/fmt
/usr/bin/fold
/usr/bin/fortune
/usr/bin/from
/usr/bin/fstat
/usr/bin/fsync
/usr/bin/ftp
/usr/bin/fuser
/usr/bin/gate-ftp
/usr/bin/gcore
/usr/bin/gencat
/usr/bin/getaddrinfo
/usr/bin/getconf
/usr/bin/getent
/usr/bin/getopt
/usr/bin/getopts	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/gnugrep
/usr/bin/gprof
/usr/bin/grdc
/usr/bin/grep
/usr/bin/groups
/usr/bin/gunzip
/usr/bin/gzcat
/usr/bin/gzexe
/usr/bin/gzip
/usr/bin/hash
/usr/bin/hd
/usr/bin/head
/usr/bin/hexdump
/usr/bin/host
/usr/bin/hxtool
/usr/bin/ibstat
/usr/bin/ibv_asyncwatch
/usr/bin/ibv_devices
/usr/bin/ibv_devinfo
/usr/bin/ibv_rc_pingpong
/usr/bin/ibv_srq_pingpong
/usr/bin/ibv_uc_pingpong
/usr/bin/ibv_ud_pingpong
/usr/bin/iconv
/usr/bin/id
/usr/bin/ident
/usr/bin/indent
/usr/bin/install
/usr/bin/ipcrm
/usr/bin/ipcs
/usr/bin/iscsictl
/usr/bin/jobs	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/join
/usr/bin/jot
/usr/bin/kadmin
/usr/bin/kcc
/usr/bin/kdestroy
/usr/bin/kdump
/usr/bin/keylogin
/usr/bin/keylogout
/usr/bin/kf
/usr/bin/kgetcred
/usr/bin/killall
/usr/bin/kinit
/usr/bin/klist
/usr/bin/kpasswd
/usr/bin/krb5-config
/usr/bin/ksu
/usr/bin/kswitch
/usr/bin/ktrace
/usr/bin/ktrdump
/usr/bin/lam
/usr/bin/last
/usr/bin/lastcomm
/usr/bin/leave
/usr/bin/less
/usr/bin/lessecho
/usr/bin/lesskey
/usr/bin/lesspipe.sh
/usr/bin/lex
/usr/bin/lex++
/usr/bin/limits
/usr/bin/locale
/usr/bin/localedef
/usr/bin/locate
/usr/bin/lock
/usr/bin/lockf
/usr/bin/logger
/usr/bin/login	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/logins
/usr/bin/logname
/usr/bin/look
/usr/bin/lorder
/usr/bin/lp
/usr/bin/lpq
/usr/bin/lpr
/usr/bin/lprm
/usr/bin/lsvfs
/usr/bin/lzcat
/usr/bin/lzdec
/usr/bin/lzegrep
/usr/bin/lzfgrep
/usr/bin/lzgrep
/usr/bin/lzless
/usr/bin/lzma
/usr/bin/lzmainfo
/usr/bin/m4
/usr/bin/mail
/usr/bin/Mail
/usr/bin/mailq
/usr/bin/mailx
/usr/bin/make
/usr/bin/make-roken
/usr/bin/makewhatis
/usr/bin/man
/usr/bin/mandoc
/usr/bin/manpath
/usr/bin/mckey
/usr/bin/mesg
/usr/bin/minigzip
/usr/bin/ministat
/usr/bin/mkcsmapper
/usr/bin/mkdep
/usr/bin/mkesdb
/usr/bin/mkfifo
/usr/bin/mkimg
/usr/bin/mklocale
/usr/bin/mkstr
/usr/bin/mktemp
/usr/bin/mkuzip
/usr/bin/more
/usr/bin/morse
/usr/bin/msgs
/usr/bin/mt
/usr/bin/nawk
/usr/bin/nc
/usr/bin/ncal
/usr/bin/netstat
/usr/bin/newaliases
/usr/bin/newgrp
/usr/bin/newkey
/usr/bin/nex
/usr/bin/nfsstat
/usr/bin/nice	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/nl
/usr/bin/nm
/usr/bin/nohup	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/ntpq
/usr/bin/number
/usr/bin/nvi
/usr/bin/nview
/usr/bin/objcopy
/usr/bin/objdump
/usr/bin/od
/usr/bin/openssl
/usr/bin/opieinfo
/usr/bin/opiekey
/usr/bin/opiepasswd
/usr/bin/otp-md4
/usr/bin/otp-md5
/usr/bin/otp-sha1
/usr/bin/pagesize
/usr/bin/passwd
/usr/bin/paste
/usr/bin/patch
/usr/bin/pathchk
/usr/bin/pawd
/usr/bin/perror
/usr/bin/pftp
/usr/bin/pgrep
/usr/bin/pkill
/usr/bin/pmcstudy
/usr/bin/pom
/usr/bin/posixshmcontrol
/usr/bin/pr
/usr/bin/primes
/usr/bin/printenv	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/printf	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/proccontrol
/usr/bin/procstat
/usr/bin/protect
/usr/bin/quota
/usr/bin/random
/usr/bin/ranlib
/usr/bin/rctl
/usr/bin/read	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/readelf
/usr/bin/readlink
/usr/bin/ree
/usr/bin/renice
/usr/bin/reset
/usr/bin/resizewin
/usr/bin/rev
/usr/bin/revoke
/usr/bin/rfcomm_sppd
/usr/bin/rgrep
/usr/bin/rot13
/usr/bin/rpcgen
/usr/bin/rpcinfo
/usr/bin/rping
/usr/bin/rs
/usr/bin/rup
/usr/bin/ruptime
/usr/bin/rusers
/usr/bin/rwall
/usr/bin/rwho
/usr/bin/scp
/usr/bin/script
/usr/bin/sdiff
/usr/bin/sed
/usr/bin/seq
/usr/bin/sftp
/usr/bin/shar
/usr/bin/showmount
/usr/bin/size
/usr/bin/slc
/usr/bin/slick-greeter-check-hidpi
/usr/bin/slick-greeter-set-keyboard-layout
/usr/bin/slogin
/usr/bin/smbutil
/usr/bin/sockstat
/usr/bin/soelim
/usr/bin/sort
/usr/bin/split
/usr/bin/sscop
/usr/bin/ssh
/usr/bin/ssh-add
/usr/bin/ssh-agent
/usr/bin/ssh-copy-id
/usr/bin/ssh-keygen
/usr/bin/ssh-keyscan
/usr/bin/stat
/usr/bin/stdbuf
/usr/bin/strfile
/usr/bin/string2key
/usr/bin/strings
/usr/bin/strip
/usr/bin/su
/usr/bin/sum
/usr/bin/svnlite
/usr/bin/svnliteadmin
/usr/bin/svnlitebench
/usr/bin/svnlitedumpfilter
/usr/bin/svnlitefsfs
/usr/bin/svnlitelook
/usr/bin/svnlitemucc
/usr/bin/svnliterdump
/usr/bin/svnliteserve
/usr/bin/svnlitesync
/usr/bin/svnliteversion
/usr/bin/systat
/usr/bin/tabs
/usr/bin/tail
/usr/bin/talk
/usr/bin/tar
/usr/bin/tcopy
/usr/bin/tee
/usr/bin/telnet
/usr/bin/tftp
/usr/bin/time
/usr/bin/timeout
/usr/bin/tip
/usr/bin/top
/usr/bin/touch
/usr/bin/tput
/usr/bin/tr
/usr/bin/true
/usr/bin/truncate
/usr/bin/truss
/usr/bin/tset
/usr/bin/tsort
/usr/bin/tty
/usr/bin/type
/usr/bin/ucmatose
/usr/bin/udaddy
/usr/bin/ul
/usr/bin/ulimit
/usr/bin/umask
/usr/bin/unalias	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/uname
/usr/bin/uncompress
/usr/bin/unexpand
/usr/bin/unifdef
/usr/bin/unifdefall
/usr/bin/uniq
/usr/bin/units
/usr/bin/unlzma
/usr/bin/unstr
/usr/bin/unvis
/usr/bin/unxz
/usr/bin/unzip
/usr/bin/unzstd
/usr/bin/uptime
/usr/bin/usbhidaction
/usr/bin/usbhidctl
/usr/bin/users
/usr/bin/uudecode	[4] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag specified. The b64decode utility is synonymous with uudecode with the -m flag specified.
/usr/bin/uuencode	[5] The uuencode and uudecode utilities are used to transmit binary files over transmission mediums that do not support other than simple ASCII data. The b64encode utility is synonymous with uuencode with the -m flag specified. The b64decode utility is synonymous with uudecode with the -m flag specified.
/usr/bin/vacation
/usr/bin/verify_krb5_conf
/usr/bin/vi
/usr/bin/view
/usr/bin/vis
/usr/bin/vmstat
/usr/bin/vtfontcvt
/usr/bin/w
/usr/bin/wait	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/wall
/usr/bin/wc
/usr/bin/what
/usr/bin/whatis
/usr/bin/whereis
/usr/bin/which	Shell builtin commands are commands that can be executed within the running shell's process. Note that, in the case of csh(1) builtin commands, the command is executed in a subshell if it occurs as any component of a pipeline except the last.
/usr/bin/who
/usr/bin/whoami
/usr/bin/whois
/usr/bin/write
/usr/bin/x-terminal-emulator
/usr/bin/xargs
/usr/bin/xo
/usr/bin/xstr
/usr/bin/xz
/usr/bin/xzcat
/usr/bin/xzdec
/usr/bin/xzdiff
/usr/bin/xzegrep
/usr/bin/xzfgrep
/usr/bin/xzgrep
/usr/bin/xzless
/usr/bin/yacc
/usr/bin/yes
/usr/bin/ypcat
/usr/bin/ypchfn
/usr/bin/ypchpass
/usr/bin/ypchsh
/usr/bin/ypmatch
/usr/bin/yppasswd
/usr/bin/ypwhich
/usr/bin/zcat
/usr/bin/zcmp
/usr/bin/zdiff
/usr/bin/zegrep
/usr/bin/zfgrep
/usr/bin/zforce
/usr/bin/zgrep
/usr/bin/zinject
/usr/bin/zless
/usr/bin/zmore
/usr/bin/znew
/usr/bin/zstd
/usr/bin/zstdcat
/usr/bin/zstdegrep
/usr/bin/zstdgrep
/usr/bin/zstdless
/usr/bin/zstdmt
/usr/bin/zstreamdump
/usr/bin/ztest
Back to usr Directory

@@ Line 31: / Line 31: @@
 |/usr/bin/awk||[https://www.freebsd.org/cgi/man.cgi?query=awk&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html awk] scans each input file for lines that match any	of a set of patterns      specified literally in prog or in one or more files specified as -f     progfile.	With each pattern there	can be an associated action that will     be	performed when a line of a file	matches	the pattern.
 |-
-|/usr/bin/b64decode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
+|/usr/bin/b64decode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
-specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.]
+specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.
 |-
-|/usr/bin/b64encode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
+|/usr/bin/b64encode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
-specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.]
+specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.
 |-
 |/usr/bin/banner||[https://www.freebsd.org/cgi/man.cgi?query=banner&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Banner] prints a large, high quality banner	on the standard	output.	 If      the message is omitted, it	prompts	for and	reads one line of its standard      input.
@@ Line 45: / Line 45: @@
 |/usr/bin/bc||[https://www.freebsd.org/cgi/man.cgi?query=bc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bc] is an interactive processor for	a language which resembles C but pro     vides unlimited precision arithmetic.  It takes input from	any expressions on the command line and any files given, then reads the standard     input.
 |-
-|/usr/bin/bg||
+|/usr/bin/bg||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
-|/usr/bin/biff||
+|/usr/bin/biff||The [https://www.freebsd.org/cgi/man.cgi?query=biff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html biff] utility informs the system whether you want to be	notified on      your terminal when	mail arrives.
 |-
-|/usr/bin/brandelf||
+|/usr/bin/brandelf||The [https://www.freebsd.org/cgi/man.cgi?query=brandelf&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html brandelf] utility marks	an ELF binary to be run	under a	certain	ABI      for FreeBSD.
 |-
-|/usr/bin/bsdcat||
+|/usr/bin/bsdcat||[https://www.freebsd.org/cgi/man.cgi?query=bsdcat&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bsdcat] typically takes a filename as an argument or reads standard	input      when used in a pipe. In both cases	decompressed data it written to	standard output.
 |-
-|/usr/bin/bsdcpio||
+|/usr/bin/bsdcpio||cpio copies files between archives	and directories.  This implementation      can extract from tar, pax,	cpio, zip, jar,	ar, and	ISO 9660 cdrom images     and can create tar, pax, cpio, ar,	and shar archives.
 |-
-|/usr/bin/bsdiff||
+|/usr/bin/bsdiff||The [https://www.freebsd.org/cgi/man.cgi?query=bsdiff&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html bsdiff]	utility	compares oldfile to newfile and	writes to patchfile a      binary patch suitable for use by [https://www.freebsd.org/cgi/man.cgi?query=bspatch&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports bspatch(1)].  When	ldfile	and newfile     are two versions of an executable program,	the patches produced are on      average a factor of five smaller than those produced by any other binary     patch tool	known to the author.
 |-
 |/usr/bin/bsdtar||
@@ Line 103: / Line 104: @@
 |/usr/bin/CC||
 |-
-|/usr/bin/cd||
+|/usr/bin/cd||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/chat||
@@ Line 133: / Line 134: @@
 |/usr/bin/comm||
 |-
-|/usr/bin/command||
+|/usr/bin/command||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
-|/usr/bin/compile_et||
+|/usr/bin/compile_et||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/compress||
@@ Line 209: / Line 210: @@
 |/usr/bin/factor||
 |-
-|/usr/bin/false||
+|/usr/bin/false||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
-|/usr/bin/fc||
+|/usr/bin/fc||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/fetch||
 |-
-|/usr/bin/fg||
+|/usr/bin/fg||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/fgrep||
@@ Line 261: / Line 262: @@
 |/usr/bin/getopt||
 |-
-|/usr/bin/getopts||
+|/usr/bin/getopts||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/gnugrep||
@@ Line 325: / Line 326: @@
 |/usr/bin/iscsictl||
 |-
-|/usr/bin/jobs||
+|/usr/bin/jobs||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/join||
@@ Line 399: / Line 400: @@
 |/usr/bin/logger||
 |-
-|/usr/bin/login||
+|/usr/bin/login||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/logins||
@@ Line 509: / Line 510: @@
 |/usr/bin/nfsstat||
 |-
-|/usr/bin/nice||
+|/usr/bin/nice||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/nl||
@@ Line 515: / Line 516: @@
 |/usr/bin/nm||
 |-
-|/usr/bin/nohup||
+|/usr/bin/nohup||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/ntpq||
@@ Line 575: / Line 576: @@
 |/usr/bin/primes||
 |-
-|/usr/bin/printenv||
+|/usr/bin/printenv||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
-|/usr/bin/printf||
+|/usr/bin/printf||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/proccontrol||
@@ Line 593: / Line 594: @@
 |/usr/bin/rctl||
 |-
-|/usr/bin/read||
+|/usr/bin/read||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/readelf||
@@ Line 779: / Line 780: @@
 |/usr/bin/umask||
 |-
-|/usr/bin/unalias||
+|/usr/bin/unalias||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/uname||
@@ Line 815: / Line 816: @@
 |/usr/bin/users||
 |-
-|/usr/bin/uudecode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
+|/usr/bin/uudecode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
-specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.]
+specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.
 |-
-|/usr/bin/uuencode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
+|/usr/bin/uuencode||[https://www.freebsd.org/cgi/man.cgi?query=b64decode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html] The uuencode and uudecode utilities are used to transmit binary files      over transmission mediums that do not support other than simple ASCII     data.  The	b64encode utility is synonymous	with uuencode with the -m flag
-specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.]
+specified.	 The b64decode utility is synonymous with uudecode with	the -m     flag specified.
 |-
 |/usr/bin/vacation||
@@ Line 837: / Line 838: @@
 |/usr/bin/w||
 |-
-|/usr/bin/wait||
+|/usr/bin/wait||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/wall||
@@ Line 849: / Line 850: @@
 |/usr/bin/whereis||
 |-
-|/usr/bin/which||
+|/usr/bin/which||Shell builtin commands are	commands that can be executed within the running shell's process.  Note that, in the case of [https://www.freebsd.org/cgi/man.cgi?query=csh&sektion=1&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports csh(1)] builtin commands, the command is executed in	a subshell if it occurs	as any component of a    pipeline except the last.
 |-
 |/usr/bin/who||

Difference between revisions of "/usr/bin/"

Revision as of 13:25, 13 February 2020

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

User Docs Hub

Contributor Docs Hub

Community Help

Tools