Difference between revisions of "/usr/local/bin/"

From GhostBSD Wiki
Jump to: navigation, search
(Content L)
(Content L)
Line 2,165: Line 2,165:
 
|linestrip-stipple-wide||
 
|linestrip-stipple-wide||
 
|-
 
|-
|linkicc||
+
|linkicc||[https://www.freebsd.org/cgi/man.cgi?query=linkicc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html linkicc] - little cms device link generator.
 +
 
 
|-
 
|-
 
|linktest||
 
|linktest||

Revision as of 14:01, 17 May 2020

Welcome to Icon Disti GhostBSD.png /usr/local/bin/.
This page is in maintenance!
Please do not change this page without to contact the author or use Discussion!
System Administration Utilities
/bin/ Tools and applications /sbin/ System Administration Utilities
/usr/bin/ Tools and applications /usr/sbin/ System tools
/usr/local/bin/ Tools and applications /usr/local/sbin/ System tools
Back to the Icon Disti GhostBSD.pngSystem

Introduction

Here you will find a lot of small applications. Most of them already installed with GhostBSD.

This directory contains more or less 2500 utilities, applications, tools. If you install an application and don't find it as a starter on your taskbar, it is most likely you will find the application in this directory. You can start this application via cli or set a link to your desktop.

Not all applications come with man pages.

Content

Extraction of /usr/local/bin/:

Content 0 - A

Utility Description
7z A file archiver with highest compression ratio
a52dec a52dec - decode ATSC A/52 audio streams
aafire aafire, aainfo, aasavefont, aatest - aalib example programs
aainfo aafire, aainfo, aasavefont, aatest - aalib example programs
aalib-config
aasavefont aafire, aainfo, aasavefont, aatest - aalib example programs
acyclic acyclic is a filter that takes a directed graph as input and outputs a copy of the graph with sufficient edges reversed to make the graph acyclic.
addftinfo addftinfo reads a troff font file and adds some additional font-metric information that is used by the groff system.
addr2line addr2line -- translate program addresses to source file names and line numbers
afmtodit afmtodit - create font files for use with groff -Tps
afuse AFUSE - automounting file system implemented in user-space using FUSE
ag-backup ag - The Silver Searcher. Like ack, but faster.
ag-tool ag - The Silver Searcher. Like ack, but faster.
agentxtrap agentxtrap - send an AgentX NotifyPDU to an AgentX master agent
agrep agrep - search a file for a string or regular expression, with approximate matching capabilities
al al, al2 - Mono Assembly Linker
al2 al, al2 - Mono Assembly Linker
analyze The analyze command displays the rotation and fallback angles, surface area, and plane equation for each face of the ARB specified on the command line.
appletviewer appletviewer - Runs applets outside of a web browser.
ar ar, ranlib -- manage archives
array Arrays can have fixed size, or can grow automatically as needed. A default value is used for entries that have not been explicitly set.
as AS - the portable GNU assembler.
aspell aspell is a utility program that connects to the Aspell library so that it can function as an ispell -a replacement, as an independent spell checker, as a test utility to test out Aspell library features, and as a utility for managing dictionaries used by the library.
aspell-import aspell-import is a command that will search for old personal dictionaries and will import them into GNU Aspell. It will look for both Ispell and Aspell dictionaries. To use it just run it from the command prompt.
atril Atril - The MATE Document Viewer
aucat aucat -- audio files manipulation tool
audio2tape audio2tape -- Sinclair ZX Spectrum audio to tape file co
autopoint autopoint - copies standard gettext infrastructure

Content B

Utility Description
baobab Baobab is a disk space analyzer for GNOME
bash Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh).
bashbug bashbug - report a bug in bash
bcomps bcomps decomposes graphs into their biconnected components, printing the components to standard output.
bounce The bounce(8) daemon maintains per-message log files with delivery status information.
brasero Brasero is a disc burning application. It is designed to be simple and easy to use. It allows to create data CD/DVD, audio CD, to copy CD/DVD and to burn images. It has some nices features, such as a song, image and video previewer. It can also search for files (thanks to beagle) and display a playlist and its contents.
bsdcat bsdcat typically takes a filename as an argument or reads standard input when used in a pipe. In both cases decompressed data it written to standard output.
bsdcpio cpio copies files between archives and directories. This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom images and can create tar, pax, cpio, ar, and shar archives.
bsdtar tar creates and manipulates streaming archive files. This implementation can extract from tar, pax, cpio, zip, jar, ar, xar, rpm, 7-zip, and ISO9660 cdrom images and can create tar, pax, cpio, ar, zip, 7-zip, and shar archives.
btcflash Btcflash is used to read update the Firmware for a BTC DRW1008 DVD+/-RW recorder.
bzz bzz - DjVu general purpose compression utility.
Back to link Top

Content C

Utility Description
c44 C44 produces a DjVuPhoto encoded image. The input image file inputfilename can be either a portable gray-map (PGM) or a portable pix-map PPM).

Input images compressed with JPEG are also accepted. It is however suggested to only use high quality JPEG files (low compression ratio, large size) because the wavelet compression will increase the defects already present in highly compressed JPEG files.

c++9
cairo-sphinx
cairo-trace
caja Caja - The MATE File Manager
caja-autorun-software caja-autorun-software - Autorun Software in Caja
caja-connect-server Caja Connect Server is the connection manager for Caja/MATE. It is provided as a part of the Caja package for the MATE Desktop Environment.

Simply running "caja-connection-server" will open a simple dialog allowing you to select the server type, and specify the server address, port, and login credentials for the server you want to connect to. This is the same dialog accessible via the Caja "File" menu, and the MATE Desktop "Places" menu.

caja-file-management-properties Caja File Management Properties is distributed as a part of the caja package and is used to configure Caja's preferences. It is typically accessible through the "Edit" menu in Caja browser windows, or by pressing "ALT+E" and then "N" once the menu opens.

File Management Preferences allows the user to configure the way caja behaves.

caja-sendto caja-sendto - convenience application to send a file via email or instant messenger
canberra-gtk-play
cancel
caspol
cb2ti3
cbc cbc - Couchbase Client Commandline Utility
cccheck cccheck- Perform static code contracts verification for CLR assemblies.
ccomps ccomps - connected components filter for graphs
ccrewrite ccrewrite - Rewrite CLR assemblies for runtime code contract verification.
cctiff
ccxxmake
cd-convert cd-it8 - Color Manager Testing Tool
cd-create-profile
cd-drive cd-drive - show CD-ROM drive characteristics
cd-fix-profile
cd-iccdump
cd-info cd-info - shows Information about a CD or CD-image
cd-it8 cd-it8 - Color Manager Testing Tool
cd-paranoia cd-paranoia 9.8 (Paranoia release III via libcdio) - an audio CD reading utility which includes extra data verification features
cd-read cd-read - reads Information from a CD or CD-image
cdda2wav cdda2wav - dumps CD audio data into sound files with extra data verification
cdda-player
cddb_query
cdparanoia cdparanoia (Paranoia release III) - an audio CD reading utility which includes extra data verification features
cdr2raw
cdr2text
cdr2xhtml
cdrdao cdrdao - reads and writes CDs in disc-at-once mode
cdrecord Cdrecord is used to record data or audio Compact Discs on an Orange Book CD-recorder, to write DVD media on a DVD-recorder or to write BluRay media on a BluRay-recorder.
cert2spc cert2spc - Transform multiple X.509 certificates to a Software Publisher Certificate
cert-sync cert-sync - Mono Certificate Store Sync Tool
certmgr certmgr - Mono Certificate Manager (CLI version)
certtool certtool - GnuTLS certificate tool
certutil
chardetect-3.7
chartread
chattr chattr - change file attributes on a Linux file system
checkmk checkmk - Awk script for generating C unit tests for use with the Check unit testing framework.
checkXML5 checkXML5 - An XML lint tool for KDE DocBook XML documents.
cheese cheese - tool to take pictures and videos from your webcam
cheetah
cheetah-analyze
cheetah-compile
chem chem - groff preprocessor for producing chemical structure diagrams
cherryd-2.7
cherrytree
chktrust chktrust - Check the trust of a PE executable.
chm_http
chmorph
chrome chromium-browser - the web browser from Google
chromedriver
cifsdd cifsdd - convert and copy a file over SMB, This tool is part of the samba(7) suite.
cinnamon-desktop-migrate-mediakeys
cjb2 cjb2 - Simple DjVuBitonal encoder.
cjpeg cjpeg - compress an image file to a JPEG file
cjs-console
ck-history
ck-launch-session
ck-list-sessions
clang80
classpath
clear-color
clear-fbo
clear-fbo-scissor
clear-fbo-tex
clear-random
clear-repeat
clear-scissor
clear-undefined
clearspd
clp
cluster cluster - find clusters in a graph and augment the graph with this information.
cmis-client
cmsutil
cmx2raw
cmx2text
cmx2xhtml
collink
colormgr
colprof
colverify
com.github.danrabbit.lookbook
contractor
convolutions
copypix
copytex
corelist corelist - a commandline frontend to Module::CoreList
corpus2array
corrupt_mpeg2
cpaldjvu cpaldjvu - DjVuDocument encoder for low-color images.
cpan This script provides a command interface (not a shell) to CPAN. At the moment it uses CPAN.pm to do the work, but it is not a one-shot command runner for CPAN.pm.
cpp9
createfpx
createhdf
createwin
crlupdate crlupdate - Mono Certficate Revocation List Downloader and Updater

This tool allows the download of new, or update of existing, Certficate Revocation List (CRL) associated with the certificates present in the user (default) or machine stores. The CRL present in the stores are used to determine the validity of unexpired, trusted X.509 certificates. To ensure CRL are always fresh consider automating the updates using the at (or similar) command(s).

crlutil
croco-0.6-config
csc csc - driver program for the CHICKEN Scheme compiler
cscope cscope - interactively examine a C program
csepdjvu csepdjvu - DjVu encoder for separated data files.
csharp csharp, gsharp - Interactive C# Shell
csi The CHICKEN Scheme interpreter
csslint-0.6
cubemap
cuberender
cue2toc Cue2toc converts cuefile from CUE to TOC format and writes the result to tocfile. If either cuefile or tocfile is omitted or a single dash "-" cue2toc reads from standard input and writes to standard ouput respectively.
cups-calibrate cups-calibrate - ESP CUPS Printer Calibration Tool This program allows you to calibrate the color output of printers using the Gutenprint CUPS driver. Please note that this program only works with the Gutenprint CUPS driver.
cups-config cups-config - get cups api, compiler, directory, and link information.
cupstestdsc cupstestdsc tests the conformance of PostScript files to the Adobe PostScript Language Document Structuring Conventions Specification version 3.0. The results of testing and any other output are sent to the standard output. The second form of the command reads PostScript from the standard input.
cupstestppd cupstestppd tests the conformance of PPD files to the Adobe PostScript Printer Description file format specification version 4.3. It can also be used to list the supported options and available fonts in a PPD file. The results of testing and any other output are sent to the standard output.
curl curl is a tool to transfer data from or to a server, using one of the supported protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMB, SMBS, SMTP, SMTPS, TELNET and TFTP). The command is designed to work without user interaction.
curl-config curl-config - Get information about a libcurl installation
cvlc
cvsps CVSps - create patchset information from CVS
cvt cvt - calculate VESA CVT mode lines
cvtsudoers
cwebp cwebp - compress an image file to a WebP file
cxpm cxpm - Check an XPM (X PixMap) file, versions XPM 1, 2, or 3.
Back to link Top

Content D

Utility Description
dav1d
dazzle-list-counters
dbus-binding-tool dbus-binding-tool - C language GLib bindings generation utility.
dbus-cleanup-sockets dbus-cleanup-sockets - clean up leftover sockets in a directory
dbus-daemon dbus-daemon - Message bus daemon
dbus-launch dbus-launch - Utility to start a message bus from a shell script
dbus-monitor dbus-monitor - debug probe to print message bus messages
dbus-run-session dbus-run-session - start a process as a new D-Bus session
dbus-send dbus-send - Send a message to a message bus
dbus-test-tool dbus-test-tool - D-Bus traffic generator and test tool
dbus-update-activation-environment dbus-update-activation-environment - update environment used for D-Bus session services
dbus-uuidgen dbus-uuidgen - Utility to generate UUIDs
dbwrap_tool dbwrap_tool - low level TDB/CTDB manipulation tool using the dbwrap interface. This tool is part of the samba(7) suite.
dcadec dcadec - decode DTS Coherent Acoustics audio streams
dconf dconf - Simple tool for manipulating a dconf database
dconf-editor The dconf-editor program provides a graphical interface for editing settings that are stored in the dconf database.
ddjvu ddjvu - Command line DjVu decoder.
derb derb reads the compiled resource bundle files passed on the command line and write them back in text form. The resulting text files have a .txt extension while compiled resource bundle source files typically have a .res extension.
derdump Derdump dumps a DER structure read from a file or, if none is specified, from standard input to standard output. It is mainly intended as a debugging tool.
deriv
desktop-file-install The desktop-file-install program is a tool to install, and optionally edit, desktop files. The desktop-file-edit program is a tool to edit a desktop file. They are mostly useful for developers and packagers.
desktop-file-validate desktop-file-validate - Validate desktop entry files
desktoptojson desktoptojson - Converts a .desktop file to a .json file.
devdump devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
dht-example
diagtool80
diffimg diffimg - Calculates intersection between two images
dijkstra dijkstra - single-source distance filter
ding ding is a dictionary lookup program for X Windows/Unix. It comes with a German-English dictionary with about 345,000 entries.
dinoshade
dirmngr Dirmngr is a server for managing and downloading certificate revocation

lists (CRLs) for X.509 certificates and for downloading the certificates themselves. Dirmngr also handles OCSP requests as an alternative to CRLs. Dirmngr is either invoked internally by gpgsm (from GnuPG 2) or when running as a system daemon through the dirmngr-client tool.

dirmngr-client dirmngr-client - Tool to access the Dirmngr services
disco disco is a tool for discovering web services and for retireving the documents that describe those services.
dispcal
dispread
dispwin
dissolve
djpeg djpeg decompresses the named JPEG file, or the standard input if no file is named, and produces an image file on the standard output. PBM-PLUS (PPM/PGM), BMP, GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected.
djvm djvm - Manipulate bundled multi-page DjVu documents.
djvmcvt djvmcvt - Convert multi-page DjVu documents.
djvudigital djvudigital - creates DjVu files from PS or PDF files.
djvudump djvudump - Display internal structure of DjVu files.
djvuextract djvuextract - Extract chunks from DjVu image files
djvumake djvumake - Assemble DjVu image files.
djvups djvups - Convert DjVu documents to PostScript.
djvused djvused - Multi-purpose DjVu document editor.
djvuserve Program djvuserve is a CGI program that can be executed by a HTTP server for serving DjVu documents. This program is able to conver
djvutoxml djvutoxml, djvuxmlparser - DjVuLibre XML Tools; The DjVuLibre XML Tools provide for editing the metadata, hyperlinks and hidden text associated with DjVu files. Unlike djvused(1) the DjVuLibre XML Tools rely on the XML technology and can take advantage of XML editors and verifiers.
djvutxt djvutxt - Extract the hidden text from DjVu documents.
djvuxmlparser djvutoxml, djvuxmlparser - DjVuLibre XML Tools; The DjVuLibre XML Tools provide for editing the metadata, hyperlinks and hidden text associated with DjVu files. Unlike djvused(1) the DjVuLibre XML Tools rely on the XML technology and can take advantage of XML editors and verifiers.
dlist-begin-call-end
dlist-dangling
dlist-degenerate
dlist-edgeflag
dlist-edgeflag-dangling
dlist-flat-tri
dlist-mat-tri
dlist-recursive-call
dlist-tri-flat-tri
dlist-tri-mat-tri
dm-tool dm-tool - a tool to control the display manager
dmcs
doas doas -- execute commands as another user
dot dot - filter for drawing directed graphs
dot_builtins
dotty dotty is a graph editor for the X Window System. It may be run as a standalone editor, or as a front end for applications that use graphs. It can control multiple windows viewing different graphs.
dpkg dpkg is a tool to install, build, remove and manage Debian packages.
dpkg-architecture dpkg-architecture provides a facility to determine and set the build and host architecture for package building.

The build architecture is always determined by an external call to dpkg(1), and cannot be set at the command line.

dpkg-buildflags dpkg-buildflags is a tool to retrieve compilation flags to use during build of Debian packages.
dpkg-buildpackage dpkg-buildpackage - build binary or source packages from sources
dpkg-checkbuilddeps This program checks the installed packages in the system against the build dependencies and build conflicts listed in the control file. If any are not met, it displays them and exits with a nonzero return code.
dpkg-deb dpkg-deb packs, unpacks and provides information about Debian archives.
dpkg-distaddfile dpkg-distaddfile adds an entry for a named file to debian/files.
dpkg-divert dpkg-divert is the utility used to set up and update the list of diversions.
dpkg-genbuildinfo dpkg-genbuildinfo reads information from an unpacked and built Debian source tree and from the files it has generated and generates a Debian control file describing the build environment and the build artifacts (.buildinfo file).
dpkg-genchanges dpkg-genchanges reads information from an unpacked and built Debian source tree and from the files it has generated and generates a Debian upload control file (.changes file).
dpkg-gencontrol dpkg-gencontrol reads information from an unpacked Debian source tree and generates a binary package control file (which defaults to debian/tmp/DEBIAN/control); during this process it will simplify the relation fields.
dpkg-gensymbols dpkg-gensymbols scans a temporary build tree (debian/tmp by default) looking for libraries and generates a symbols file describing them. This file, if non-empty, is then installed in the DEBIAN subdirectory of the build tree so that it ends up included in the control information of the package.
dpkg-maintscript-helper dpkg-maintscript-helper - works around known dpkg limitations in maintainer scripts
dpkg-mergechangelogs dpkg-mergechangelogs - 3-way merge of debian/changelog files
dpkg-name This manual page documents the dpkg-name program which provides an easy way to rename Debian packages into their full package names. A full package name consists of package_version_architecture.package-type as specified in the control file of the package. The version part of the filename consists of the upstream version information optionally followed by a hyphen and the revision information. The package-type part comes from that field if present or fallbacks to deb.
dpkg-parsechangelog dpkg-parsechangelog reads and parses the changelog of an unpacked Debian source tree and outputs the information in it to standard output in a machine-readable form.
dpkg-query dpkg-query - a tool to query the dpkg database
dpkg-scanpackages dpkg-scanpackages sorts through a tree of Debian binary packages and creates a Packages file, used by apt(8), dselect(1), etc, to tell the user what packages are available for installation. These Packages files are the same as those found on Debian archive sites and CD-ROMs. You might use dpkg-scanpackages yourself if making a directory of local packages to install on a cluster of machines.
dpkg-scansources dpkg-scansources scans the given binary-dir for .dsc files. These are used to create a Debian source index, which is output to stdout.
dpkg-shlibdeps dpkg-shlibdeps - generate shared library substvar dependencies
dpkg-source dpkg-source - Debian source package (.dsc) manipulation tool
dpkg-split dpkg-split splits Debian binary package files into smaller parts and reassembles them again, to support the storage of large package files on small media such as floppy disks.
dpkg-statoverride dpkg-statoverride - override ownership and mode of files
dpkg-trigger dpkg-trigger is a tool to explicitly activate triggers and check for its support on the running dpkg.
dpkg-vendor dpkg-vendor is a tool to query information about vendors listed in /usr/local/etc/dpkg/origins. /usr/local/etc/dpkg/origins/default contains information about the current vendor.
draw2arrays
drawarrays
drawelements
drawelements-large
drawoverhead
drawpix
drawrange
dropbox dropbox - A command line interface to the Dropbox service
dsbmc
dsbmc-cli dsbmc-cli is a command-line client for DSBMD that provides a simple interface to query information about storage devices, and to send requests to mount, unmount and eject these.
dselect dselect is one of the primary user interfaces for managing packages on a Debian system. At the dselect main menu, the system administrator can:
  • Update the list of available package versions,
  • View the status of installed and available packages,
  • Alter package selections and manage dependencies,
  • Install new packages or upgrade to newer versions.
dsymutil80
dtd2rng
dtd2xsd dtd2xsd - XML Schema generator from XML document that contains DTD.
dtsdec
dumpmscat
dumpsexp
dvd-ram-control
dvd+rw-booktype
dvd+rw-format
dvd+rw-mediainfo
dvipdf dvipdf - Convert TeX DVI file to PDF using ghostscript and dvips
dwebp dwebp - decompress a WebP file to an image file
dwp
Back to link Top

Content E

Utility Description
easy_install-2.7
easy_install-3.6
easy_install-3.7
ebook2html
ebook2raw
ebook2text
echo-client-2
edgepaint edgepaint takes as input a graph in DOT format with node position information (the pos attribute) and colors the edges in a manner making it easier to tell them apart.
editorconfig-0.12.2
eglgears_x11
eglinfo
eglkms
egltri_x11
einfo
elfedit elfedit - Update the ELF header of ELF files. elfedit updates the ELF header of ELF files which have the matching ELF machine and file types. The options control how and which fields in the ELF header should be updated.
eLut
enc2xs enc2xs builds a Perl extension for use by Encode from either Unicode Character Mapping files (.ucm) or Tcl Encoding Files (.enc). Besides being used internally during the build process of the Encode module, you can use enc2xs to add your own encoding to perl. No knowledge of XS is necessary.
encguess encguess - guess character encodings of files; The encoding identification is done by checking one encoding type at a time until all but the right type are eliminated. The set of encoding types to try is defined by the -s parameter and defaults to ascii, utf8 and UTF-16/32 with BOM. This can be overridden by passing one or more encoding types via the -s parameter. If you need to pass in multiple suspect encoding types, use a quoted string with the a space separating each value.
enchant Enchant - a spellchecker; Enchant has a global and a per-user ordering file named enchant.ordering. It lets the user specify which spelling backend to use for individual languages in the case when you care which backend gets used. The global file is located in $(datadir)/enchant and the per-user file is located in ~/.enchant. The per-user file takes precedence, if found.
enchant-2
enchant-lsmod
enchant-lsmod-2
encode_keychange encode_keychange produces a KeyChange string using the old and new passphrases as described in Section 5 of RFC 2274 "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)". -t option is mandatory and specifies the hash transform type to use.
engine The engine command is used to query the status and capabilities of the specified engine's. Engines may be specified before and after all other command-line flags. Only those specified are queried.
engrampa Engrampa is the official archive manager for the MATE Desktop Environment, it is a graphical front-end to archiving utilities such as tar and zip. It is a fork of File Roller.
enum_chmLib
enumdir_chmLib
envsubst envsubst - substitutes environment variables in shell format strings
eom eom or the Eye of MATE is the official image viewer for the MATE Desktop Environment. It aims to be simplistic, lightweight, and easy to use. The Eye of MATE may also be used to perform basic tasks like image flipping and rotation.
eps2eps ps2ps, eps2eps - Ghostscript PostScript "distiller"
epsffit Epsffit fits an EPSF file (encapsulated PostScript) to a given bounding

box. The coordinates of the box are given by (llx,lly) for the lower left, and (urx,ury) for the upper right, in PostScript units (points).

eqn This manual page describes the GNU version of eqn, which is part of the groff document formatting system. eqn compiles descriptions of equations embedded within troff input files into commands that are understood by troff. Normally, it should be invoked using the -e option of groff. The syntax is quite compatible with Unix eqn. The output of GNU eqn cannot be processed with Unix troff; it must be processed with GNU troff. If no files are given on the command line, the standard input will be read. A filename of - will cause the standard input to be read.
eqn2graph Reads an EQN equation (one line) as input; produces an image file (by

default in Portable Network Graphics format) suitable for the Web as output.

erb26
es2_info
es2gears_x11
es2tri
escputil escputil is a command line utility to perform various maintenance tasks on Epson Stylus inkjet printers. These tasks include head alignment, head cleaning, nozzle check, printer identification, and retrieval of ink level from the printer.
espeak
event_rpcgen.py
evince Evince is a document viewer capable of displaying multiple and single page document formats like PDF and Postscript. For more general information about Evince please visit our website at Evince
evince-previewer
evince-thumbnailer
exctags exctags - Generate tag files for source code
exempi exempi - command line tool to manipulate XMP metadata
exiv2 exiv2 is a program to read and write Exif, IPTC, XMP metadata and image comments and can read many vendor makernote tags. The program optionally converts between Exif tags, XMP properties and IPTC datasets as recommended by the Exif Standard, the IPTC Standard, the XMP specification and Metadata Working Group guidelines.
exo-csource exo-csource is a small utility that generates C code containing arbitrary data, useful for compiling texts or other data directly into programs.
exo-desktop-item-edit
exo-open exo-open is a command line frontend to the Xfce Preferred Applications framework. It can either be used to open a list of urls with the default URL handler or launch the preferred application for a certain category.
exo-preferred-applications
exr2aces
exrenvmap
exrheader
exrmakepreview
exrmaketiled
exrmultipart
exrmultiview
exrstdattr
ext4fuse
external-ip
extract_a52 extract_a52 - extract ATSC A/52 audio from a MPEG stream.
extract_chmLib
extract_dca extract_dca - extract DTS Coherent Acoustics audio from a MPEG stream.
extract_dts
extract_mpeg2 extract_mpeg2 - extract MPEG video streams from a multiplexed stream.
extracticc
extractres extractres - filter to extract resources from a PostScript document
extractttag
Back to link Top

Content F

Utility Description
faad faad -- Process an Advanced Audio Codec stream; This utility provides a command line interface to libfaad2. This program reads in MPEG-4 AAC files, processes, and outputs them in either Microsoft WAV, MPEG-4 AAC ADTS, or standard PCM formats.
fakeCMY
fakeread
fax2ps fax2ps - convert a TIFF facsimile to compressed PostScripttm
fax2tiff fax2tiff - create a TIFF Class F fax file from raw fax data
fbo_firecube
fbobind
fbotexture
fbsdpkgupdate
fc_solve_find_index_s2ints.py
fc-cache fc-cache - build font information cache files; fc-cache scans the font directories on the system and builds font information cache files for applications using fontconfig for their font handling.
fc-cat fc-cat reads the font information from cache files or related to font directories and emits it in ASCII form.
fc-conflist
fc-list fc-list lists fonts and styles available on the system for applications

using fontconfig. If any elements are specified, only those are printed. Otherwise family and style are printed, unless verbose output is requested.

fc-match fc-match matches pattern (empty pattern by default) using the normal fontconfig matching rules to find the best font available. If --sort is given, the sorted list of best matching fonts is displayed. The --all option works like --sort except that no pruning is done on the list of

fonts.

fc-pattern fc-pattern parses pattern (empty pattern by default) and shows the

parsed result. If --config is given, config substitution is performed on the pattern before being displayed. If --default is given, default substitution is performed on the pattern before being displayed.

fc-query fc-query queries font-file(s) using the normal fontconfig rules and

prints out font pattern for each face found. If --index is given, only one face of each file is queried, otherwise all faces are queried.

fc-scan fc-scan scans file(s) recursively and prints out font pattern for each

face found.

fc-solve fc-solve - automated solver for Freecell and related Solitiare variants
fc-validate fc-validate validates font-file(s) if each fonts satisfies the language

coverage according to the orthography files in fontconfig. If --index is given, only one face of each file is validated, otherwise all faces are validated.

ffmpeg ffmpeg is a very fast video and audio converter that can also grab from a live audio/video source. It can also convert between arbitrary sample rates and resize video on the fly with a high quality polyphase filter.
ffprobe ffprobe gathers information from multimedia streams and prints it in human- and machine-readable fashion. For example it can be used to check the format of the container used by a multimedia stream and the format and type of each media stream contained in it.
fftw-wisdom fftw-wisdom is a utility to generate FFTW wisdom files, which contain

saved information about how to optimally compute (Fourier) transforms of various sizes. FFTW is a free library to compute discrete Fourier transforms in one or more dimensions, for arbitrary sizes, and of both real and complex data, among other related operations. More information on FFTW can be found at the FFTW home page: http://www.fftw.org

fftw-wisdom-to-conf fftw-wisdom-to-conf is a utility to generate C configuration routines from FFTW wisdom files, where the latter contain saved information about how to optimally compute (Fourier) transforms of various sizes. A configuration routine is a C subroutine that you link into your program, replacing a routine of the same name in the FFTW library, that determines which parts of FFTW are callable by your program.
fftwf-wisdom fftwf-wisdom is a utility to generate FFTW wisdom files, which contain

saved information about how to optimally compute (Fourier) transforms of various sizes. FFTW is a free library to compute discrete Fourier transforms in one or more dimensions, for arbitrary sizes, and of both real and complex data, among other related operations. More information on FFTW can be found at the FFTW home page: http://www.fftw.org

fh2raw
fh2svg
fh2text
FileCheck80
fill
find-all-symbols80
find-freecell-deal-index.py
findsmb findsmb is a perl script that prints out several pieces of information

about machines on a subnet that respond to SMB name query requests.

fire
fish fish is a command-line shell written mainly with interactive use in mind. The full manual is available in HTML by using the help command from inside fish.
fish_indent fish_indent is used to indent a piece of fish code. fish_indent reads commands from standard input and outputs them to standard output or a specified file.
fish_key_reader fish_key_reader is used to study input received from the terminal and

can help with key binds. The program is interactive and works on standard input. Individual characters themselves and their hexadecimal values are displayed.

five-or-more five-or-more is the GNOME port of the once popular Windows game called

Colour Lines. The game's objective is to align as often as possible five or more objects of the same colour and shape causing them to disappear.

fix-qdf fix-qdf - repair PDF files in QDF form after editing
fixdlsrps Fixdlsrps is a perl filter which "fixes" PostScript generated from the DviLaser/PS driver so that it works correctly with Angus Duggan's psutils package.
fixfmps fixfmps - filter to fix Framemaker documents so PSUtils work
fixmacps fixmacps - filter to fix Macintosh documents with saner version of md
fixproc Fixes a process named "proc" by performing the specified action. The

actions can be check, kill, restart, exist, or fix. The action is specified on the command line or is read from a default database, which describes the default action to take for each process. The database format and the meaning of each action are described below.

fixpsditps Fixpsditps is a perl filter which "fixes" PostScript from Transcript's

psdit program so that it works correctly with Angus Duggan's psutils package.

fixpspps fixpspps - filter to fix PSPrint PostScript so PSUtils work
fixscribeps fixscribeps - filter to fix Scribe documents so PSUtils work
fixtpps fixtpps - filter to fix Tpscript documents to work with PSUtils
fixwfwps Fixwfwps is a perl filter which "fixes" PostScript from Word for Windows so that it works correctly with Angus Duggan's psutils package.
fixwpps fixwpps - filter to fix WP documents so PSUtils work
fixwwps Fixwwps is a perl filter which "fixes" PostScript from Windows Write so

that it works correctly with Angus Duggan's psutils package.

flac flac is a command-line tool for encoding, decoding, testing and analyzing FLAC streams.
flat-clip
fmfconv fmfconv -- Fuse Movie File converter
fogcoord
folks-import
folks-inspect
foomatic-combo-xml The Foomatic acceleration engine written in C (by Till), it computes printer/driver combo XML files and the printer overview XML file.
foomatic-compiledb foomatic-compiledb - Compile the Foomatic printer/driver database
foomatic-configure foomatic-configure - the main configuration program of the foomatic printing system.
foomatic-perl-data foomatic-perl-data - generate Perl data structures from XML
foomatic-ppd-options The foomatic-ppd-options program reads the specified PPD files or stdin and decodes the PPD file to produce a list of options. This is really just a text based version of other print configuration tools.
foomatic-ppd-to-xml
foomatic-ppdfile foomatic-ppdfile - Generate a PPD file for a given printer/driver combo
foomatic-printjob foomatic-printjob - manage printer jobs in a spooler-independent fashion
foomatic-searchprinter
four-in-a-row Four-in-a-Row - four-in-a-row game for GNOME; The object of the game is to build a line of four of your marbles while trying to stop your opponent (human or computer) building a line of his

or her own. A line can be horizontal, vertical or diagonal.

fplight
fragcoord
freecell-solver-fc-pro-range-solve
freecell-solver-multi-thread-solve
freecell-solver-range-parallel-solve
freetype-config freetype-config - Get information about a libfreetype installation
fribidi
fribidi-config
fs-tri
fsfs-access-map
fsfs-stats
fslight
fsraytrace
funzip funzip - filter for extracting from a ZIP archive in a pipe
fuse Fuse is a Sinclair ZX Spectrum emulator. It supports several models (including the 128), with quite faithful emulation of the display and sound.
fuse-ext2
fuse-ext2.probe
Back to link Top

Content G

Utility Description
g-ir-annotation-tool
g-ir-compiler g-ir-compiler converts one or more GIR files into one or more typelib.

The output will be written to standard output unless the --output is specified.

g-ir-generate g-ir-generate is an GIR generator, using the repository API. It generates GIR files from a raw typelib or in a shared library (--shlib). The output will be written to standard output unless the --output is specified.
g-ir-inspect
g-ir-scanner g-ir-scanner is a tool which generates GIR XML files by parsing headers

and introspecting GObject based libraries. It is usually invoked during the normal build step for a project and the information is saved to disk and later installed, so that language bindings and other applications can use it. Header files and source files are passed in as arguments on the command line. The suffix determines whether a file be treated as a source file (.c) or a header file (.h). Currently only C based libraries are supported by the scanner.

g++9
gacutil gacutil is a tool used by developers to install versioned assemblies

into the system Global Assembly Cache (GAC) to become part of the assemblies that are available for all applications at runtime.

gacutil2
gamma gamma(), gammaf(), gamma_r(), and gammaf_r() are deprecated aliases for lgamma(), lgammaf(), lgamma_r(), and lgammaf_r(), respectively.
gamma4scanimage The tool gamma4scanimage creates a gamma table in the format expected by scanimage. You can define a gamma, a shadow and a highlight value. You also can specify the size (maxin) and maximum output value (maxout) of the gamma table.
gapi2-codegen
gapi2-fixup
gapi2-parser
gapplication gapplication - D-Bus application launcher
gbi GBI stands for Graphical BSD installer.
gc gc is a graph analogue to wc in that it prints to standard output the number of nodes, edges, connected components or clusters contained in the input files. It also prints a total count for all graphs if more than one graph is given.
gcc9
gcc-ar9
gcc-nm9
gcc-ranlib9
gcm-calibrate gcm-import - GNOME Color Manager Calibrator Tool
gcm-import gcm-import - GNOME Color Manager Calibrator Tool
gcm-inspect gcm-import - GNOME Color Manager Calibrator Tool
gcm-picker gcm-import - GNOME Color Manager Calibrator Tool
gcm-viewer gcm-import - GNOME Color Manager Calibrator Tool
gconf-merge-tree
gconfsharp2-schemagen
gconftool-2 gconftool-2 - GNOME configuration tool; Each preference in the GConf repository is expressed as a key-value pair. A GConf preference key is an element in the GConf repository that corresponds to an application preference. Preference keys typically have simple values such as strings, integers, or lists of strings and integers.
gcov9
gcov-dump9
gcov-tool9
gcr-viewer
gd2copypal
gd2togif
gd2topng
gdbm_dump The gdbm_dump utility creates a dump of the specified gdbm(3) database file. The name for the output dump file is supplied by the second argument (FILE). If not specified, the output goes to the standard error.
gdbm_load gdbm_load - re-create a GDBM database from a dump file.
gdbmtool The gdbmtool utility allows you to view and modify an existing GDBM database or to create a new one.
gdbus gdbus - Tool for working with D-Bus objects
gdbus-codegen gdbus-codegen is used to generate code and/or documentation for one or

more D-Bus interfaces. The tool reads D-Bus Introspection XML[1] files and generates output files. The tool currently supports generating C code (via --generate-c-code) and Docbook XML (via --generate-docbook).

gdcmpgif
gdialog
gdiffmk gdiffmk compares two groff(1), nroff(1), or troff(1) documents, file1

and file2, and creates an output which is file2 with added `margin character' (.mc) commands that indicate the differences.

gdk-pixbuf-csource gdk-pixbuf-csource is a small utility that generates C code containing images, useful for compiling images directly into programs.
gdk-pixbuf-pixdata
gdk-pixbuf-query-loaders gdk-pixbuf-query-loaders collects information about loadable modules for gdk-pixbuf and writes it to the default cache file location, or to stdout.
gdk-pixbuf-thumbnailer
gdlib-config
gdparttopng
gdtopng
gearbox
gears gears - draw interlocking gears, for xscreensaver.
geartrain
gegl
gegl-imgcmp
genbrk genbrk reads the break (boundary) rule source code from rule-file and creates a break iteration data file. Normally this data file has the .brk extension.
gencfu gencfu reads confusable character definitions in the input file, which are plain text files containing confusable character definitions in the input format defined by Unicode UAX39 for the files confusables.txt and confusablesWholeScript.txt. This source (.txt) format is also accepted by ICU spoof detectors. The files must be encoded in utf-8 format, with or without a BOM.
gencnval gencnval converts the ICU aliases file converterfile into the binary

file cnvalias.icu. This binary file can then be read directly by ICU, or used by pkgdata(1) for incorporation into a larger archive or library.

gendict gendict reads the word list from dictionary-file and creates a string

trie dictionary file. Normally this data file has the .dict extension.

genmipmap
genrb genrb converts the resource bundle source files passed on the commandline to their binary form or to a Java source file for use with ICU4J. The resulting binary files have a .res extension while resource bundle source files typically have a .txt extension. Java source files have a

java extension and follow the ICU4J naming conventions.

gentest gentest - Run random generic SMB operations against two SMB servers and

show the differences in behavior

gentrigrams
genxs genxs is a tool for generating custom XML serialization writers and readers for classes.
geom-outlining-130
geom-outlining-150
geom-sprites
geom-stipple-lines
geom-wide-lines
getafm Getafm generates a PostScript file which prints an AFM file for a font to the printer's output channel. The output of getafm should be sent to a printer, or to GhostScript.
getopt The getopt utility is used to break up options in command lines for easy

parsing by shell procedures, and to check for legal options.

gettext The gettext program translates a natural language message into the

user's language, by looking up the translation in a message catalog.

gettext.sh
gettextize gettextize - install or upgrade gettext infrastructure
gfortran9
gif2rgb gif2rgb - convert images saved as GIF to 24-bit RGB triplets
gif2webp gif2webp - Convert a GIF image to WebP
gifbuild gifbuild - dump GIF data in a textual format, or undump it to a GIF
gifclrmp gifclrmp - extract colormaps from GIF images
giffix giffix - attempt to fix up broken GIFs
giftext giftext - dump GIF pixels and metadata as text
giftogd2
giftool giftool - GIF transformation tool
gimp-2.10 gimp - an image manipulation and paint program.
gimp-test-clipboard-2.0
gimptool-2.0
gio gio - To configure a project to use Giovanni simply put a `.giovanni.conf` file in the root directory of your project and run `gio deploy`.
gio-querymodules gio-querymodules creates a giomodule.cache file in the listed directories. This file lists the implemented extension points for each module that has been found. It is used by GIO at runtime to avoid opening all modules just to find out which extension points they are implementing.
git git - the stupid content tracker; Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.

See gittutorial(7) to get started, then see giteveryday(7) for a useful minimum set of commands. The Git User's Manual[1] has a more in-depth introduction. After you mastered the basic concepts, you can come back to this page to learn what commands Git offers. You can learn more about individual Git commands with "git help command". gitcli(7) manual page gives you an overview of the command-line command syntax. A formatted and hyperlinked copy of the latest Git documentation can be viewed at https://git.github.io/htmldocs/git.html.

git-cvsserver git-cvsserver - A CVS server emulator for Git; This application is a CVS emulation layer for Git.

It is highly functional. However, not all methods are implemented, and for those methods that are implemented, not all switches are implemented.

git-p4.py
git-receive-pack git-receive-pack - Receive what is pushed into the repository
git-shell git-shell - Restricted login shell for Git-only SSH access
git-upload-archive git-upload-archive - Send archive back to git-archive
git-upload-pack git-upload-pack - Send objects packed back to git-fetch-pack
gjs-console
glewinfo
glib-compile-resources glib-compile-resources reads the resource description from FILE and the files that it references and creates a binary resource bundle that is suitable for use with the GResource API. The resulting bundle is then written out as-is, or as C source for linking into an application.
glib-compile-schemas glib-compile-schemas compiles all the GSettings XML schema files in DIRECTORY into a binary file with the name gschemas.compiled that can be used by GSettings. The XML schema files must have the filename extension .gschema.xml. For a detailed description of the XML file format, see the GSettings documentation.
glib-genmarshal glib-genmarshal is a small utility that generates C code marshallers for callback functions of the GClosure mechanism in the GObject sublibrary of GLib. The marshaller functions have a standard signature, they get passed in the invoking closure, an array of value structures holding the callback function parameters and a value structure for the return value of the callback. The marshaller is then responsible to call the respective C code function of the closure with all the parameters on the stack and to collect its return value.
glib-gettextize glib-gettextize helps to prepare a source package for being internationalized through gettext. It is a variant of the gettextize that ships with gettext.
glib-mkenums glib-mkenums is a small perl-script utility that parses C code to extract enum definitions and produces enum descriptions based on text templates specified by the user. Most frequently this script is used to produce C code that contains enum values as strings so programs can provide value name strings for introspection.
glilypond glilypond -- integrate lilypond parts into groff
glinfo
gloss
glsl-compile-time
glslstateschange
glsync
gltestperf
glthreads
glxcontexts
glxdemo
glxgears
glxgears_fbconfig
glxgears_pixmap
glxheads
glxinfo
glxpbdemo
glxpixmap
glxsnoop
glxswapcontrol
gml2gv gml2gv converts a graph specified in the GML format to a graph in the

GV (formerly DOT) format. gv2gml converts a graph specified in the GV format to a graph in the GML format.

gnome-2048
gnome-calendar GNOME Calendar is a simple and beautiful calendar application designed to perfectly fit the GNOME desktop. By reusing the components which the GNOME desktop is build on, Calendar nicely integrates with the

GNOME ecosystem.

gnome-chess see ports collection
gnome-clocks see ports collection
gnome-contacts see ports collection
gnome-control-center see ports collection
gnome-dictionary see ports collection
gnome-doc-prepare see ports collection
gnome-doc-tool see ports collection
gnome-font-viewer see ports collection
gnome-keyring-3 see ports collection
gnome-keyring-daemon see ports collection
gnome-klotski see ports collection
gnome-mahjongg see ports collection
gnome-mines see ports collection
gnome-mount see ports collection
gnome-nibbles see ports collection
gnome-open see ports collection
gnome-photos see ports collection
gnome-robots see ports collection
gnome-screenshot see ports collection
gnome-search-tool see ports collection
gnome-shell see ports collection
gnome-shell-extension-prefs see ports collection
gnome-shell-extension-tool see ports collection
gnome-shell-perf-tool see ports collection
gnome-sudoku see ports collection
gnome-system-log see ports collection
gnome-system-monitor see ports collection
gnome-taquin see ports collection
gnome-tetravex see ports collection
gnome-thumbnail-font see ports collection
gnome-todo see ports collection
gnomevfs-cat Gstreamer gnomevfs plugin
gnomevfs-copy Gstreamer gnomevfs plugin
gnomevfs-df Gstreamer gnomevfs plugin
gnomevfs-info Gstreamer gnomevfs plugin
gnomevfs-ls Gstreamer gnomevfs plugin
gnomevfs-mkdir Gstreamer gnomevfs plugin
gnomevfs-monitor Gstreamer gnomevfs plugin
gnomevfs-mv Gstreamer gnomevfs plugin
gnomevfs-rm Gstreamer gnomevfs plugin
gnote see ports collection
gnuchess see ports collection
gnuchessu see ports collection
gnuchessx see ports collection
gnutls-cli gnutls-cli - GnuTLS client; Simple client program to set up a TLS connection to some other com puter. It sets up a TLS connection and forwards data from the standard

input to the secured socket and vice versa.

gnutls-cli-debug gnutls-cli-debug - GnuTLS debug client
gnutls-serv gnutls-serv - GnuTLS server
gobject-query gobject-query is a small utility that draws a tree of types.

gobject-query takes a mandatory argument that specifies whether it should iterate over the fundamental types or print a type tree.

gpatch patch takes a patch file patchfile containing a difference listing produced by the diff program and applies those differences to one or more original files, producing patched versions. Normally the patched versions are put in place of the originals. Backups can be made; see the -b

or --backup option. The names of the files to be patched are usually taken from the patch file, but if there's just one file to be patched it can be specified on the command line as originalfile.

gperl gperl - groff preprocessor for Perl parts in roff files
gpg2 gpg2 - OpenPGP encryption and signing tool
gpg-agent gpg-agent - Secret key management for GnuPG
gpg-connect-agent The gpg-connect-agent is a utility to communicate with a running gpgagent. It is useful to check out the commands gpg-agent provides using the Assuan interface. It might also be useful for scripting simple applications. Input is expected at stdin and out put gets printed to stdout.
gpg-error
gpg-error-config gpg-error-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use Libgpg-error. It is also used internally to the .m4 macros for GNU autoconf that are included with Libgpg-error.
gpg-wks-server
gpgconf gpgconf - Modify .gnupg home directories
gpgme-config
gpgme-json
gpgme-tool
gpgparsemail gpgparsemail - Parse a mail message into an annotated format
gpgrt-config
gpgscm
gpgsm gpgsm is a tool similar to gpg to provide digital encryption and signing services on X.509 certificates and the CMS protocol. It is mainly used as a backend for S/MIME mail processing. gpgsm includes a full featured certificate management and complies with all rules defined for

the German Sphinx project.

gpgtar
gpgv2 gpgv2 is an OpenPGP signature verification tool.
gphoto2-config
gphoto2-port-config
gphotofs
gpinyin gpinyin - Chinese European-like writing within groff
gprof The gprof utility produces an execution profile of C, Pascal, or Fortran77 programs. The effect of called routines is incorporated in the profile of each caller.
gr2fonttest
granite-demo
grap2graph grap2graph - convert a grap diagram into a cropped bitmap image
graphml2gv graphml2gv converts a graph specified in the GRAPHML format to a graph

in the GV (formerly DOT) format.

gresource gresource offers a simple commandline interface to GResource. It lets

you list and extract resources that have been compiled into a resource file or included in an elf file (a binary or a shared library).

greytiff
grl-inspect-0.3 grl-inspect is a tool that prints out information on available Grilo

sources and metadata keys. When executed with no SOURCE argument, grlinspect will print the list of all plugins and sources. When executed with a SOURCE, grl-inspect will print information about that source.

grl-launch-0.3 grl-launch is a tool that allows the user to run Grilo operations from

the command line.

grn grn - groff preprocessor for gremlin files
grodvi grodvi is a driver for groff that produces TeX dvi format. Normally it should be run by groff -Tdvi. This will run troff -Tdvi; it will also input the macros in /usr/share/tmac/dvi.tmac.
groff groff - front-end for the groff document formatting system
groffer The groffer program is the easiest way to use groff(1). It can display arbitrary documents written in the groff(7) language or other roff(7) languages that are compatible to the original troff language. The groffer program also includes many of the features for finding and displaying the UNIX manual pages (man pages), such that it can be used as a replacement for a man(1) program.
grog grog - guess options for groff command
grolbp grolbp - groff driver for Canon CAPSL printers (LBP-4 and LBP-8 series laser printers)
grolj4 grolj4 is a driver for groff that produces output in PCL5 format suitable for an HP Laserjet 4 printer.
gropdf gropdf translates the output of GNU troff to PDF.
grops grops translates the output of GNU troff to PostScript.
grotty grotty - groff driver for typewriter-like devices
growisofs growisofs - combined mkisofs frontend/DVD recording program.
gs gs - Ghostscript (PostScript and PDF language interpreter and previewer)
gs-tri
gsbj gsbj - Format and print text for BubbleJet printer using ghostscript
gsdj gsdj - Format and print text for DeskJet printer using ghostscript
gsdj500 gsdj500 - Format and print text for DeskJet 500 BubbleJet using ghostscript
gsettings gsettings - GSettings configuration tool
gsettings-data-convert gsettings-data-convert reads values out of the users GConf database and stores them in GSettings.
gsettings-schema-convert gsettings-schema-convert converts between GConf and GSettings schema file formats. Note that the conversion is not expected to be fully automated. You are expected to verify and edit the result of the conversion.
gsf gsf is a simple archive utility, somewhat similar to tar(1). It operates on files following one of the structured file formats understood by the G Structured File library, for example, Microsoft Excel(TM) files.
gsf-office-thumbnailer gsf-office-thumbnailer is used internally by GNOME applications such as nautilus to generate thumbnails of several types of office application files. While it is possible to invoke it manually, it is usually invoked automatically by nautilus.
gsf-vba-dump gsf-vba-dump - extract Visual Basic for Applications macros Various Microsoft binary data formats, including Excel (.xls), Word (.doc) and PowerPoint (.ppt) can embed macro code streams. These macro streams are in P-code (intermediate language) compiled from Visual Basic for Applications (VBA). The gsf-vba-dump utility extracts these macro streams.
gslj gslj - Format and print text for LaserJet printer using ghostscript
gslp gslp - Format and print text using ghostscript
gsnd gsnd - Run ghostscript (PostScript and PDF engine) without display
gsound-play
gsraytrace
gst-device-monitor-1.0 gst-device-monitor-1.0 is a command line tool that can be used to test GStreamer's device monitoring functionality. By default it will just print a list of all devices found and exit, but you can also make it wait around for more devices by passing the --follow option. You can also pass it one or more filter arguments to filter the kind of devices you are interested in.
gst-discoverer-1.0 gst-discoverer-1.0 is a tool that can be used to print basic metadata and stream information about a media file. It can be run on individual files or whole directories. It will recurse into sub-directories in that case.
gst-inspect-1.0 gst-inspect is a tool that prints out information on available

GStreamer plugins, information about a particular plugin, or information about a particular element. When executed with no PLUGIN or ELEMENT argument, gst-inspect will print a list of all plugins and elements together with a summary. When executed with a PLUGIN or ELEMENT argument, gst-inspect will print information about that plug-in or element.

gst-launch-1.0 gst-launch is a tool that builds and runs basic GStreamer pipelines.
gst-play-1.0 gst-play-1.0 is a command line tool that can be used to test basic

playback using the playbin element. You can pass it individual files, URIs or whole directories (in which case it will recurse into sub-di-rectories as well).

gst-stats-1.0
gst-typefind-1.0 gst-typefind uses the GStreamer type finding system to determine the relevant GStreamer plugin to parse or decode file, and the corresponding media type.
gtar tar - an archiving utility
gtester gtester is a utility to run unit tests that have been written using the

GLib test framework.

gtester-report gtester-report is a script which converts the XML output generated by

gtester into HTML.

gtf Gtf is a utility for calculating VESA GTF modes. Given the desired horizontal and vertical resolutions and refresh rate (in Hz), the parameters for a matching VESA GTF mode are printed out. Two output formats are supported: mode lines suitable for the Xorg xorg.conf(5) file, and mode parameters suitable for the Linux fbset(8) utility.
gtk3-demo
gtk3-demo-application
gtk3-icon-browser
gtk3-widget-factory
gtk-builder-convert
gtk-builder-tool
gtk-demo
gtk-encode-symbolic-svg
gtk-launch
gtk-query-immodules-2.0
gtk-query-immodules-3.0
gtk-query-settings
gtk-update-icon-cache
gtkhtml3-editor-test
gucharmap
guild
guile GNU Guile is an implementation of the Scheme programming language. It extends the R5RS and R6RS language standards, providing additional features necessary for real-world use.
guile-config
guile-snarf
gupnp-binding-tool-1.2
gv2gml gml2gv converts a graph specified in the GML format to a graph in the GV (formerly DOT) format. gv2gml converts a graph specified in the GV format to a graph in the GML format.
gvcolor gvcolor is a filter that sets node colors from initial seed values. Colors flow along edges from tail to head, and are averaged (as HSB vectors) at nodes. The graph must already have been processed by dot. Appropriate choice of initial colors yields drawings in which node colors help to emphasize logical relationships between nodes, even when they are spread far apart in the layout.
gvfs-cat gvfs-cat concatenates the given files and prints them to the standard

output.

gvfs-copy gvfs-copy copies a file from SOURCE to DEST, or multiple SOURCEs to DIRECTORY. gvfs-copy is similar to the traditional cp utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-info gvfs-info shows information about the given locations. gvfs-info is similar to the traditional ls utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.
gvfs-less gvfs-less executes less on the output of gvfs-cat.

gvfs-less works just like the traditional less utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.

gvfs-ls gvfs-ls lists information about the given locations. If no location is

given, it defaults to the current directory. gvfs-ls is similar to the traditional ls utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.

gvfs-mime gvfs-mime can query information about applications that are registered

to handle a mime-type, or set the default handler for a mime-type.

gvfs-mkdir gvfs-mkdir creates directories.
gvfs-monitor-dir gvfs-monitor-dir - Monitor directories for changes; As long as gvfs-monitor-dir is running, it will print information about file creation, deletion, file content and attribute changes and mount and unmount operations inside the specified directories.
gvfs-monitor-file gvfs-monitor-file - Monitor files for changes
gvfs-mount gvfs-mount - Mounts the locations
gvfs-move gvfs-move - Copy files
gvfs-open gvfs-open opens files with the default application that is registered to handle files of this type.
gvfs-rename gvfs-rename is similar to the traditional rename utility, but using

gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.

gvfs-rm gvfs-rm - Delete files
gvfs-save gvfs-save - Save standard input
gvfs-set-attribute gvfs-set-attribute - Set file attributes
gvfs-trash gvfs-trash - Move files or directories to the trash
gvfs-tree gvfs-tree - List contents of directories in a tree-like format
gvgen gvgen - generate graphs
gvimtutor
gvmap gvmap takes as input a graph in DOT format, finds node clusters and produces a rendering of the graph as a geographic-style map, with clusters highlighted as countries, in xdot format.
gvmap.sh gvmap.sh - pipeline for running gvmap
gvpack gvpack reads in a stream of graphs, combines the graphs into a single layout, and produces a single graph serving as the union of the input graphs. The input graphs must be in dot format, and must have all necessary layout information. Acceptable input is produced by applying a Graphviz layout program, such as dot or neato, with no -T flag.
gvpr gvpr (previously known as gpr) is a graph stream editor inspired by awk. It copies input graphs to its output, possibly transforming their structure and attributes, creating new graphs, or printing arbitrary information. The graph model is that provided by libcgraph(3). In particular, gvpr reads and writes graphs using the dot language.
gxl2gv gxl2gv converts between graphs represented in GXL and in the GV language. Unless a conversion type is specified using a flag, gxl2gv will deduce the type of conversion from the suffix of the input file, a ".gv" suffix causing a conversion from GV to GXL, and a ".gxl" suffix causing a conversion from GXL to GV. If no suffix is available, e.g. when the input is from a pipe, and no flags are used then gxl2gv assumes the type of the input file from its executable name so that gxl2gv converts from GXL to GV, and gv2gxl converts from GV to GXL.
Back to link Top

Content H

Utility Description
h2ph h2ph - convert .h C header files to .ph Perl header files
h2xs h2xs - convert .h C header files to Perl extensions
hal-device
hal-disable-polling hal-disable-polling can be used to to disable and enable media detection on drives with removable storage. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-find-by-capability hal-get-capability finds device object in the HAL device database by looking at device capabilities. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-find-by-property hal-get-property finds device object in the HAL device database by looking at device properties. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-get-property hal-get-property retrieves a property from a device object in the HAL device database. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-is-caller-locked-out hal-is-caller-locked-out determines if a specific caller is locked out of a specific D-Bus interface on a specific device. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hal-is-caller-privileged hal-is-caller-privileged determines if a specific caller is privileged for a given PolicyKit action on given device. For more information about both the big picture, HAL and PolicyKit , refer to the HAL spec (which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution) and also the PolicyKit documentation.
hal-lock hal-lock can be used to acquire a lock on a given interface either on a

given device or globally. For more information about both the big picture and the semantics of HAL locks, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.

hal-set-property hal-set-property sets a property on a device object in the HAL device database. For more information about both the big picture and specific HAL properties, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.
hb-ot-shape-closure
hb-shape
hb-subset
hitori
hmac256 This is a standalone HMAC-SHA-256 implementation used to compute an HMAC-SHA-256 message authentication code. The tool has originally been developed as a second implementation for Libgcrypt to allow comparing against the primary implementation and to be used for internal consistency checks. It should not be used for sensitive data because no mechanisms to clear the stack etc are used.
hmaptool80
hpftodit hpftodit creates a font file for use with a Hewlett-Packard Laser-

Jet 4-series (or newer) printer with groff -Tlj4, using data from an HP tagged font metric (TFM) file. tfm_file is the name of the TFM file for the font; Intellifont and TrueType TFM files are supported, but symbol set TFM files are not. map_file is a file giving the groff names for characters in the font;

httpcfg httpcfg - Mono Certificate Management for HttpListener; This tool is used to manage the certificates used by the HttpListener embeddable server class when the HttpListener is configured as an HTTPS server instead of an HTTP server.
hunspell hunspell - spell checker, stemmer and morphological analyzer
hunzip hunzip - decompress and decrypt hzip files to the standard output
hzip hunzip is a small utility for text file compression and encryption, especially for sorted dictionaries. "hunspell filename" creates the compressed file "filename.hz" without removing the original file.
Back to link Top

Content I

Utility Description
iagno Iagno is a two-player strategy game similar to Go. The board is 8 by 8 with tiles that are black on one side and white on the other side. The object of Iagno is to flip as many of your opponent's tiles to your color as possible without your opponent flipping your tiles. This is done by trapping your opponent's tiles between two tiles of your own color.
ibus ibus is a command line utility which can restart or exit ibus-daemon, get or set the current ibus engine or list the ibus engines. Homepage: https://github.com/ibus/ibus/wiki
ibus-daemon ibus-daemon is a daemon program for ibus and it is also a start up program for users to activate ibus daemon, engines and panel.
ibus-setup ibus-setup - configuration program for ibus
iccdump
iccgamut
icclu
iconv The iconv utility converts the codeset of file (or from standard input if

no file is specified) from codeset from_name to codeset to_name and outputs the converted text on standard output.

icu-config icu-config simplifies the task of building and linking against ICU as compared to manually configuring user makefiles or equivalent. Because icu-config is an executable script, it also solves the problem of locating the ICU libraries and headers, by allowing the system PATH to

locate it.

icuinfo
identity
idevice_id idevice_id - Prints device name or a list of attached devices.
idevicebackup idevicebackup - Create or restore backup for devices.
idevicebackup2
idevicecrashreport idevicecrashreport - Retrieve crash reports from a device.
idevicedate idevicedate - Display the current date or set it on a device.
idevicedebug idevicedebug - Interact with the debugserver service of a device.
idevicedebugserverproxy
idevicediagnostics idevicediagnostics - Interact with the diagnostics interface of a device.
ideviceenterrecovery ideviceenterrecovery - Make a device enter recovery mode.
ideviceimagemounter ideviceimagemounter - Mount disk images on the device.
ideviceinfo ideviceinfo - Show information about the first connected device.
idevicename idevicename - Display the device name or set it to NAME if specified.
idevicenotificationproxy idevicenotificationproxy - Post or observe notifications on a device.
idevicepair idevicepair - Manage host pairings with devices and usbmuxd.
ideviceprovision ideviceprovision - Manage provisioning profiles on a device.
idevicescreenshot idevicescreenshot - Gets a screenshot from the connected device.
idevicesyslog idevicesyslog - Relay syslog of a connected device.
idle2.7
idle3.6
idle3.7
idn idn - Internationalized Domain Names command line tool; Internationalized Domain Name (IDN) convert STRINGS, or standard input. Command line interface to the internationalized domain name library.

All strings are expected to be encoded in the preferred charset used by your locale. Use `--debug' to find out what this charset is. You can override the charset used by setting environment variable CHARSET. To process a string that starts with `-', for example `-foo', use `--' to signal the end of parameters, as in `idn --quiet -a -- -foo'. Mandatory arguments to long options are mandatory for short options too.

idn2
ifuse ifuse - Mount directories of an iOS device locally using fuse. Mount directories of an iOS device locally using fuse. By default the media directory is mounted, options allow to also mount the sandbox container of an app, an app's documents folder or even the root filesystem on jailbroken devices.
ikdasm
ilasm ilasm is the Mono ILAsm assembler. You can pass one or more options to drive the compiler, and a set of source files.
illumread
img2webp
imgcmp The imgcmp command compares two images of the same geometry with respect to a given metric. Please use the --help command line switch and the JasPer Software Reference Manual for more information.
imginfo The imginfo command displays information about an image. Please use the --help command line switch and the JasPer Software Reference Manual for more information.
includeres Includeres includes resources (fonts, procsets, patterns, files, etc) in place of %%IncludeResource comments in a PostScript document. The resources are searched for in the current directory and the system default directory under the resource name, and with an appropriate extension.
indexinfo
indxbib indxbib - make inverted index for bibliographic databases
innochecksum innochecksum prints checksums for InnoDB files. This tool reads an InnoDB tablespace file, calculates the checksum for each page, compares the calculated checksum to the stored checksum, and reports mismatches, which indicate damaged pages. It was originally developed to speed up

verifying the integrity of tablespace files after power outages but can also be used after file copies. Because checksum mismatches will cause InnoDB to deliberately shut down a running server, it can be preferable to use this tool rather than waiting for a server in production usage to encounter the damaged pages.

install-printerdriver
installvst
instmodsh instmodsh - A shell to examine installed modules
invprofcheck
ipers
ipf-mod.pl
ippfind ippfind - find internet printing protocol printers
iproxy
iptc
irb26
iso-info iso-info - shows Information about an ISO 9660 image
iso-read iso-read - reads portions of an ISO 9660 image
isodebug isodebug - print genisoimage debug info from ISO-9660 image
isodump devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
isoinfo devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
isosurf
isovfy devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images.
ispellaff2myspell
Back to link Top

Content J

Utility Description
jasper The jasper command converts to and from JPEG-2000 files.
javavm The Java VM wrapper provides a convenient system for switching between different Java VMs. It also provides symbolic links in /usr/local/bin to allow the use of the Java executables without having to add the specific Java VM executable directories to the PATH environment variable.
jbgtopbm jbgtopbm - JBIG1 to portable bitmap file converter
jbgtopbm85
jbig2dec jbig2dec - File format converter specialized in JBIG2 decoding
jiv The jiv command displays a JPEG-2000 image on an X display. Use the arrow keys for scrolling and < and > for zooming. Please use the --help command line switch and the JasPer Software Reference Manual for more information.
jmtpfs
jpegicc jpegicc - little cms ICC profile applier for JPEG.
jpegtran jpegtran performs various useful transformations of JPEG files. It can

translate the coded representation from one variant of JPEG to another, for example from baseline JPEG to progressive JPEG or vice versa. It can also perform some rearrangements of the image data, for example turning an image from landscape to portrait format by rotation.

jpgicc jpgicc - little cms ICC profile applier for JPEG.
js24
js24-config
js52
js52-config
js60
js60-config
json_pp json_pp converts between some input and output formats (one of them is

JSON). This program was copied from json_xs and modified.

json_reformat
json_verify
json-glib-format
json-glib-validate
Back to link Top

Content K

Utility Description
kactivities-cli
katalyzer katalyzer analyzes Kate streams and displays information about them.

The type of information to select is selectable on the command line. Several multiplexed Kate streams may be analyzed at the same time.

kate kate - Advanced text editor for KDE
kate-syntax-highlighter
katedec katedec - decodes Kate streams to a textual description
kateenc kateenc - create Kate streams from text input
kbuildsycoca5 kbuildsycoca5 - Rebuilds the KService desktop file system configuration

cache.

kbxutil
kcookiejar5 kcookiejar5 is a command line interface to the HTTP cookie store used

by KDE, a D-BUS service to store/retrieve/clean cookies.

kdebugdialog5
kded5 kded5 consolidates several small services in one process. These are mostly D-Bus services provided by KDED modules, but it also manages sycoca (a binary cache of servicetypes, mimetypes and services used by KService) and KConfig update scripts as needed.
kdeinit5 kdeinit5 is a process launcher somewhat similar to the famous init used

for booting UNIX. It executes KDE programs and kdeinit loadable modules (KLMs) starting them more efficiently.

kdeinit5_shutdown
kdeinit5_wrapper kdeinit5_wrapper, kshell5 and kwrapper5 are programs thatstart programs via kdeinit.
key2raw
key2text
key2xhtml
kf5-config kf5-config is a command line program used to retrieve information about

Frameworks installation or user paths.

kgendesignerplugin kgendesignerplugin - Generates widget plugins for Qt(TM) Designer.
kglobalaccel5
kiconfinder5
kile Kile - an Integrated LaTeX Editing Environment
kjs5 kjs5 - KDE ECMAScript compatible interpreter
kodak2ti3
kpackagelauncherqml
kpackagetool5 kpackagetool5 - Install, list, remove Plasma packages
kpat KPat (aka KPatience) is a relaxing card sorting game. To win the game a player has to arrange a single deck of cards in certain order amongst each other.
kquitapp5
kreadconfig5
ksba-config
ksh93 ksh, rksh, pfksh - KornShell, a standard/restricted command and programming language
kshell5 kdeinit5_wrapper, kshell5 and kwrapper5 are programs thatstart programs via kdeinit.
ktelnetservice5
ktrash5
kwallet-query kwallet-query comes in handy when shell scripts need to read or update

the KDE Wallet. It works by manipulating the entries displayed in the KDE Wallet Manager utility. It's only parameter is the walletname the tool should read or update. The operation mode is specified by the options.

kwalletd5
kwrapper5 kdeinit5_wrapper, kshell5 and kwrapper5 are programs thatstart programs via kdeinit.
kwrite KWrite is a text editor by KDE, based on the Kate's editor component.
kwriteconfig5
Back to link Top

Content L

Utility Description
lame lame Fast MP3 encoder kit
lc lc tool is a license compiler for Mono. It's used to convert a licenses.licx file to a resource that can be embedded into an executable.
ld ld combines a number of object and archive files, relocates their data and ties up symbol references. Usually the last step in compiling a program is to run ld.
ld.bfd
ld.gold
ld.lld80
ld64.lld80
ldapcompare ldapcompare opens a connection to an LDAP server, binds, and performs a

compare using specified parameters.

ldapdelete ldapdelete - LDAP delete entry tool
ldapexop ldapexop - issue LDAP extended operations
ldapmodify ldapmodify, ldapadd - LDAP modify entry and LDAP add entry tools
ldapmodrdn ldapmodrdn - LDAP rename entry tool
ldappasswd ldappasswd - change the password of an LDAP entry
ldapsearch ldapsearch - LDAP search tool
ldapurl ldapurl extracts the components of the ldapuri option argument
ldapwhoami ldapwhoami opens a connection to an LDAP server, binds, and performs a

whoami operation.

lefty lefty is a two-view graphics editor for technical pictures.
libart2-config
libassuan-config
libevdev-tweak-device
libgcrypt-config
libgtop_daemon2
libgtop_server2
libIDL-config-2
libinput libinput - libinput-based X.Org input driver
libnetcfg The libnetcfg utility can be used to configure the libnet. Starting from perl 5.8 libnet is part of the standard Perl distribution, but the libnetcfg can be used for any libnet installation.
libpng16-config libpng - Portable Network Graphics (PNG) Reference Library 1.6.29
libwacom-list-local-devices
libwmf-config
libwmf-fontmap
lightsoff
linc-cleanup-sockets
line line tries to determine the cache line size in bytes of the largest cache which is smaller than len bytes.
line-clip
line-cull
line-flat
line-smooth
line-stipple-wide
line-userclip
line-userclip-clip
line-userclip-nop
line-userclip-nop-clip
line-wide
line-xor
lineloop
lineloop-clip
lineloop-elts
linestrip
linestrip-clip
linestrip-flat-stipple
linestrip-stipple
linestrip-stipple-wide
linkicc linkicc - little cms device link generator.
linktest
listbasic
lit2epub
lit80
live555HLSProxy
live555MediaServer
live555ProxyServer
lkbib
lklfuse
llc80
lld80
lld-link80
lldb80
lldb-argdumper80
lldb-mi80
lldb-server80
lldb-test80
lldb-vscode80
lli80
llvm-ar80
llvm-as80
llvm-bcanalyzer80
llvm-cat80
llvm-cfi-verify80
llvm-config80
llvm-cov80
llvm-cvtres80
llvm-cxxmap80
llvm-diff80
llvm-dis80
llvm-dlltool80
llvm-dwarfdump80
llvm-dwp80
llvm-elfabi80
llvm-exegesis80
llvm-extract80
llvm-link80
llvm-lit80
llvm-mc80
llvm-mca80
llvm-modextract80
llvm-mt80
llvm-nm80
llvm-objcopy80
llvm-objdump80
llvm-opt-report80
llvm-pdbutil80
llvm-profdata80
llvm-ranlib80
llvm-rc80
llvm-readelf80
llvm-readobj80
llvm-rtdyld80
llvm-size80
llvm-split80
llvm-stress80
llvm-strings80
llvm-strip80
llvm-symbolizer80
llvm-tblgen80
llvm-undname80
llvm-xray80
lneato
lobase
localc
locktest
lodbias
lodraw
loffice
lofromtemplate
loimpress
bin/lomath
long-fixed-func
lookbib
loweb
lowntfs-3g
lowriter
lp
lp_solve
lpoptions
lpq
lpr
lprm
lprsetup.sh
lpstat
ls2ti3
lsattr
lshal
lua52
luac52
lz4
lz4_decompress
Back to link Top

Content M

Utility Description
macpack
make_pysol_freecell_board.py
makealias
makecert
makeconv
makemhr
makepqg
mandelbrot
mangle
manywin
marco
marco-message
marco-theme-viewer
marco-window-demo
markdown
markdown_py-2.7
masktest
mate-about
mate-about-me
mate-appearance-properties
mate-at-properties
mate-calc
mate-calc-cmd
mate-color-select
mate-control-center
mate-default-applications-properties
mate-desktop-item-edit
mate-dictionary
mate-disk-usage-analyzer
mate-display-properties
bin/mate-font-viewer
mate-keybinding-properties
mate-keyboard-properties
mate-mouse-properties
mate-network-properties
mate-notification-properties
mate-panel
mate-panel-test-applets
mate-power-manager
mate-power-preferences
mate-power-statistics
mate-screensaver
mate-screensaver-command
mate-screensaver-preferences
mate-screenshot
mate-search-tool
mate-session
mate-session-inhibit
mate-session-properties
mate-session-save
mate-system-log
mate-system-monitor
mate-terminal
mate-terminal.wrapper
mate-thumbnail-font
mate-typing-monitor
mate-volume-control
mate-volume-control-status-icon
mate-window-properties
mate-wm
mautil
mconfig
mcs
mdassembler
mdb_copy
mdb_dump
mdb_load
mdb_stat
mdbrebase
mdoc
mdoc-assemble
mdoc-export-html
mdoc-export-msxdoc
mdoc-update
mdoc-validate
mdvalidater
meinproc5
metacity
metacity-message
metacity-theme-viewer
metacity-window-demo
metaflac
mhddfs
mib2c
mib2c-update
midicat
mikeyParse
miniunzip
minizip
mk_cmds
mkbundle
mkfontdir
mkfontscale
mkisofs
mm2gv
mmc-tool
mmroff
mod
modularize80
modutil
mono-api-html
mono-api-info
mono-boehm
mono-cil-strip
mono-configuration-crypto
mono-find-provides
mono-find-requires
mono-gdb.py
mono-heapviz
mono-package-runtime
mono-service
mono-service2
mono-sgen
mono-sgen-gdb.py
mono-shlib-cop
mono-symbolicate
mono-test-install
mono-xmltool
monodis
monodocer
monodocs2html
monodocs2slashdoc
monograph
monolinker
monop
monop2
morph3d
mouse-dpi-tool
mozcerts-qt5
mozo
mozroots
mp3fs
mp3rtp
mpeg2dec
MPEG2TransportStreamIndexer
mpg123
mpg123-id3dump
mpg123-strip
mpicalc
mppcheck
mpplu
mppprof
mprof-report
msd-background-helper
msgattrib
msgcat
msgcmp
msgcomm
msgconv
msgen
msgexec
msgfilter
msgfmt
msggrep
msginit
msgmerge
msgunfmt
msguniq
mtdev-test
mtp-albumart
mtp-albums
mtp-connect
mtp-detect
mtp-emptyfolders
mtp-files
mtp-filetree
mtp-folders
mtp-format
mtp-getplaylist
mtp-newplaylist
mtp-playlists
mtp-reset
mtp-thumb
mtp-tracks
mtp-trexist
multiarb
multictx
multinoise
multitex
munch
mutter
mvxattr
mwaw2csv
mwaw2html
mwaw2raw
mwaw2svg
mwaw2text
mwawFile
mwawZip
my_print_defaults
myisam_ftdump
myisamchk
myisamlog
myisampack
bin/mysql
mysql_config
mysql_config_editor
mysql_install_db
mysql_plugin
mysql_secure_installation
mysql_ssl_rsa_setup
mysql_tzinfo_to_sql
mysql_upgrade
mysqladmin
mysqlbinlog
mysqlcheck
mysqld_multi
mysqld_safe
mysqldump
mysqldumpslow
mysqlimport
mysqlpump
mysqlshow
mysqlslap
mysqltest
mysqlxtest
Back to link Top

Content N

Utility Description
nano
natpmpc
nautilus
nautilus-autorun-software
ndrdump
nemo
nemo-autorun-software
nemo-connect-server
nemo-open-with
nemo-preview
neofetch
neon-config
neqn
net
net-snmp-cert
net-snmp-config
net-snmp-create-v3-user
netcardmgr
nettle-hash
nettle-lfib-stream
nettle-pbkdf2
networkmgr
ngettext
nm
nmblookup
noise
noise2
nop
notify-send
npth-config
nroff
nspr-config
nss-config
ntfs-3g
ntfs-3g.probe
ntfscat
ntfscluster
ntfscmp
ntfsfix
ntfsinfo
ntfsls
ntlm_auth
numbers2csv
numbers2raw
numbers2text
nunit-console
nunit-console2
nunit-console4
nvidia-bug-report.sh
Back to link Top

Content O

Utility Description
objcopy
objdump
ocs
ocspclnt
ocsptool
oeminst
offset
oidcalc
okular
okularkirigami
oLschema2ldif
openal-info
openRTSP
opj_compress
opj_decompress
opj_dump
opt80
orbit2-config
orbit-idl-2
orc-bugreport
orcc
orcus-css-dump
orcus-detect
orcus-json
orcus-mso-encryption
orcus-xml-dump
orcus-yaml
orcus-zip-dump
osage
out123
overlay
Back to link Top

Content P

Utility Description
p7content
p7env
p7sign
p7verify
p11-kit
p11tool
pa-info
pacat
pacmd
pactl
padsp
pages2html
pages2raw
pages2text
pal2rgb
paltex
pam_helper
pango-list
pango-view
paperconf
parsetrigrams
pasuspender
pavucontrol
pax11publish
pbdemo
pbinfo
pbmtojbg
pbmtojbg85
pcre2-config
pcre2grep
pcre2test
pcre-config
pcregrep
pcretest
pdb2mdb
pdbedit
pdf2dsc
pdf2ps
pdfattach
pdfdetach
pdffonts
pdfimages
pdfinfo
pdfmom
pdfroff
pdfseparate
pdfsig
pdftocairo
pdftohtml
pdftoppm
pdftops
pdftotext
pdfunite
peas-demo
pedump
peglgears
perl
perlbug
perldoc
perlivp
perlthanks
permview
perror
peverify
f2afm
fbtopfa
pfbtops
pgon-mode
phononsettings
pi-make-microsoft-freecell-board
pic
pic2graph
piconv
pidl
pinentry-gnome3
pinentry-qt5
pinentry-tty
pixeltest
pk12util
pkaction
pkcheck
pkcs1-conv
pkexec
pkgdata
pkttyagent
pl2pm
plank
plasmapkg2
playSIP
plistutil
pluma
pmd2raw
pmd2svg
pmd2text
png-fix-itxt
pngfix
pngtogd
pngtogd2
pod2html
pod2man
pod2text
pod2usage
podchecker
podselect
point
point-clip
point-param
point-sprite
point-wide
point-wide-smooth
pointblast
pointcoord
points
polkit-action
polkit-auth
polkit-config-file-validate
polkit-gnome-authorization
polkit-gnome-example
polkit-policy-file-validate
poly
poly-flat
poly-flat-clip
bin/poly-flat-unfilled-clip
poly-unfilled
post-grohtml
ppdc
ppdhtml
ppdi
ppdmerge
ppdpo
bin/pphs
ppm2tiff
pre-grohtml
precat
preconv
preparetips5
preunzip
prezip
prezip-bin
printafm
printcal
printtarg
profcheck
profile2map
profiles
projtex
protoc
protocoltojson
prove
proxy
prune
ps2ascii
ps2epsi
ps2pdf
ps2pdf12
ps2pdf13
ps2pdf14
ps2pdfwr
ps2ps
ps2ps2
psbook
psicc
psktool
psmerge
psnup
pspell-config
psresize
psselect
pstops
ptar
ptardiff
ptargrep
pub2raw
pub2xhtml
pulseaudio
pwmake
pwscore
pydoc2.7
pydoc3.6
pydoc3.7
pygobject-codegen-2.0
pygtk-codegen-2.0
pygtk-demo
python2.7
python2.7-config
python3.6
python3.6m
python3.6m-config
python3.7
python3.7m
python3.7m-config
pyuic5-3.7
pyvenv-3.6
pyvenv-3.7
Back to link Top

Content Q

Utility Description
qcatool-qt5
qpaeq
qpdf
qqwing
qtchooser
quad
bin/quad-clip
quad-clip-all-vertices
quad-clip-nearplane
quad-degenerate
quad-flat
quad-offset-factor
quad-offset-unfilled
quad-offset-units
quad-tex-2d
quad-tex-3d
quad-tex-alpha
quad-tex-pbo
quad-tex-sub
quad-unfilled
quad-unfilled-clip
quad-unfilled-stipple
quadrapassel
quads
quadstrip
quadstrip-clip
quadstrip-cont
quadstrip-flat
qvlc
qxp2raw
qxp2svg
qxp2text
Back to link Top

Content R

Utility Description
ranlib
rapper
rarian-example
rarian-sk-config
rarian-sk-extract
rarian-sk-gen-uuid
rarian-sk-get-cl
rarian-sk-get-content-list
rarian-sk-get-extended-content-list
rarian-sk-get-scripts
rarian-sk-install
arian-sk-migrate
rarian-sk-preinstall
rarian-sk-rebuild
rarian-sk-update
rasqal-config
raw2hdf
raw2tiff
ray
rdfproc
rdjpgcom
rdoc26
readcd
readelf
readpix
readpixels
recode-sr-latin
redland-config
redland-db-upgrade
refer
refine
reflect
regdiff
registerRTSPStream
regpatch
regshell
regtree
renormal
replace
resgen
resgen2
resolve_stack_dump
resolveip
revfix
rhythmbox
rhythmbox-client
ri26
roff2dvi
roff2html
roff2pdf
roff2ps
roff2text
roff2x
roqet
rpcclient
rsaperf
rsvg-convert
rsync
ruby26
run-with-aspell
rvlc
rzsh
rzxcheck
rzxdump
rzxtool
Back to link Top

Content S

Utility Description
samba-ldbadd
samba-ldbdel
samba-ldbdump
samba-ldbedit
samba-ldbmodify
samba-ldbrename
samba-ldbsearch
samba-regedit
samba-tool
samplers
samplers_array
sancov80
sane-config
sane-find-scanner
sapWatch
scan-build80
scan-view80
scanadf
scanimage
scanin
sccmap
scgcheck
scl2trd
scp-dbus-service
sd2raw
sd2svg
sd2text
sdc2csv
sdl2-config
sdl-config
sdw2html
secret-tool
secutil
setreg
setxkbmap
sexp-conv
sfconvert
sfinfo
sgen
sgen-grep-binprot
shadow_sampler
shadowtex
shape
sharedtex
sharedtex_mt
sharesec
shasum
shlibsign
shotwell
showchar
shtest
signcode
signon-ui
signond
signonpluginprocess
signtool
signver
simple-mtpfs
simplex-noise
singlebuffer
sip-3.7
size
skinning
smbcacls
smbclient
smbcontrol
smbcquotas
smbget
smbpasswd
smbspool
smbstatus
smbtar
smbtorture
smbtree
sn
snap2tzx
snapconv
snapdump
sndfile-cmp
sndfile-concat
sndfile-convert
sndfile-deinterleave
sndfile-info
sndfile-interleave
sndfile-metadata-get
sndfile-metadata-set
sndfile-play
sndfile-resample
sndfile-salvage
sndiod
snmp-bridge-mib
snmpbulkget
snmpbulkwalk
snmpcheck
snmpconf
snmpdelta
snmpdf
snmpget
snmpgetnext
snmpnetstat
snmpset
snmpstatus
snmptable
snmptest
snmptranslate
snmptrap
snmpusm
snmpvacm
snmpwalk
soapsuds
soelim
software-station
sol
solid-hardware5
spd-say
spdsend
spec2cie
specplot
spectex
speech-dispatcher
speexdec
speexenc
spellout
splain
splitti3
spotread
spriteblast
sqlite3
sqlmetal
sqlobject-admin
sqlobject-convertOldURI
sqlsharp
srptool
ssltap
start-pulseaudio-x11
startx
station-tweak
stex3d
strings
strip
strsclnt
sub-tex
substrings.pl
sudo
sudoreplay
svcutil
svn
svn-mergeinfo-normalizer
svn-populate-node-origins-index
svnadmin
svnauthz
svnauthz-validate
svnbench
svnconflict
svndiff
svndiff3
svndiff4
svndumpfilter
svnfsfs
svnlook
svnmover
svnmucc
svnraisetreeconflict
svnrdump
svnserve
svnsync
svnversion
swapbuffers
swell-foop
sxpm
symcryptrun
symkeyutil
synclient
syndaemon
synthcal
synthread
system-config-printer
system-config-printer-applet
Back to link Top

Content T

Utility Description
taglib-config
tali
tape2pulses
tape2wav
tapeconv
targen
tbl
tclsh8.5
tclsh8.6
tdbbackup
tdbdump
tdbrestore
tdbtool
teapot
telegram-desktop
terrain
bin/tessdemo
test_chmLib
testAMRAudioStreamer
testDVVideoStreamer
testH264VideoStreamer
testH264VideoToHLSSegments
/testH264VideoToTransportStream
testH265VideoStreamer
testH265VideoToTransportStream
testMKVSplitter
testMKVStreamer
testMP3Receiver
testMP3Streamer
testMPEG1or2AudioVideoStreamer
testMPEG1or2ProgramToTransportStream
testMPEG1or2Splitter
testMPEG1or2VideoReceiver
testMPEG1or2VideoStreamer
testMPEG2TransportReceiver
testMPEG2TransportStreamer
testMPEG2TransportStreamSplitter
testMPEG2TransportStreamTrickPlay
testMPEG4VideoStreamer
testOggStreamer
testOnDemandRTSPServer
testparm
testpattern
testRelay
testReplicator
testRTSPClient
testWAVAudioStreamer
tex-quads
texaaline
texcyl
texdemo1
texenv
teximage
texture_from_pixmap
textures
tfmtodit
th_gen_idx.pl
thunar
thunar-settings
tiff2bw
tiff2pdf
tiff2ps
tiff2rgba
tiffcmp
tiffcp
tiffcrop
tiffdiff
tiffdither
tiffdump
tiffgamut
tifficc
tiffinfo
tiffmedian
tiffset
tiffsplit
tificc
timage
toc2cddb
toc2cue
toFloat
tomboy
touchpad-edge-detector
toyball
tpmd
tpmtool
tracker
transicc
transmission-gtk
transpose-freecell-board.py
traptoemail
tred
tri
tri-2101010
tri-2101010-dlist
tri-alpha
tri-alpha-tex
tri-array-interleaved
tri-blend
tri-blend-color
tri-blend-max
tri-blend-min
tri-blend-revsub
tri-blend-sub
tri-clear
tri-clip
tri-cull
tri-cull-both
tri-dlist
tri-edgeflag
tri-edgeflag-array
tri-edgeflag-pv
tri-fbo
tri-fbo-tex
tri-fbo-tex-mip
tri-flat
tri-flat-clip
tri-fog
tri-fp
tri-fp-const-imm
tri-lit
tri-lit-material
tri-logicop-none
tri-logicop-xor
tri-mask-tri
tri-multitex-vbo
tri-orig
tri-point-line-clipped
tri-query
tri-repeat
tri-rotate
tri-scissor-tri
tri-square
tri-stencil
tri-stipple
tri-tex
tri-tex-1d
tri-tex-3d
tri-tex-stipple
tri-tri
tri-unfilled
tri-unfilled-clip
tri-unfilled-edgeflag
tri-unfilled-fog
tri-unfilled-point
tri-unfilled-smooth
tri-unfilled-tri
tri-unfilled-tri-lit
tri-unfilled-userclip
tri-unfilled-userclip-stip
tri-userclip
tri-viewport
tri-z
tri-z-9
tri-z-clip
tri-z-eq
trifan
trifan-flat
trifan-flat-clip
trifan-flat-unfilled-clip
trifan-unfilled
trirast
trispd
tristrip
tristrip-clip
tristrip-flat
troff
trust
ttfread
tunnel
tunnel2
twolame
twoside
txt2ti3
tzxlist
Back to link Top

Content U

Utility Description
uchardet
uconv
umax_pp
unflatten
unix-lpr.sh
unmunch
unopkg
unzip
unzipsfx
update-alternatives
update-desktop-database
update-mime-database
update-qtchooser-wrapper
update-station
upnpc
upower
utp_recv
utp_send
utp_test
uuidgen
Back to link Top

Content V

Utility Description
vala-gen-introspect-0.40
valac-0.40
valadoc-0.40
vao_demo
vapigen-0.40
vbc
vbo
vbo-drawarrays
vbo-drawarrays-2101010
vbo-drawelements
vbo-drawrange
vbo-noninterleaved
vbo-tri
vboxtool
vert-or-frag-only
vert-tex
vertexrate
vfstest
vfychain
vfyserv
viewgam
vim
vimdot
vimtutor
visualinfo
vlc
vlc-wrapper
vmmouse_detect
vobStreamer
vp-array
vp-array-hf
vp-array-int
vp-clip
vp-line-clip
vp-tri
vp-tri-cb
vp-tri-cb-pos
vp-tri-cb-tex
vp-tri-imm
vp-tri-invariant
vp-tri-swap
vp-tri-tex
vp-unfilled
vpxdec
vpxenc
vsd2raw
vsd2text
vsd2xhtml
vsraytrace
vss2raw
vss2text
vss2xhtml
vte
vte-2.91
Back to link Top

Content W

Utility Description
wasm-ld80
watchgnupg
wayland-scanner
wbinfo
WebKitWebDriver
webpinfo
webpmux
webpng
wincopy
winpos
wish8.5
wish8.6
wks2csv
wks2raw
wks2text
wmctrl
wmf2eps
wmf2fig
wmf2gd
bin/wmf2svg
bin/wmf2x
woff2_compress
woff2_decompress
woff2_info
word-list-compress
wordforms
wordlist2hunspell
wpd2html
wpd2raw
wpd2text
wpg2raw
wpg2svg
wpg2svgbatch.pl
wps2html
wps2raw
wps2text
wrjpgcom
wsdl
wsdl2
Back to link Top

Content X

Utility Description
x86_64-portbld-freebsd12.1-c++9
x86_64-portbld-freebsd12.1-g++9
x86_64-portbld-freebsd12.1-gcc9
x86_64-portbld-freebsd12.1-gcc-9.3.0
x86_64-portbld-freebsd12.1-gcc-ar9
x86_64-portbld-freebsd12.1-gcc-nm9
x86_64-portbld-freebsd12.1-gcc-ranlib9
x86_64-portbld-freebsd12.1-gfortran9
x265
x509-parser
xauth
xbuild
xcam
xconfig
xdg-desktop-icon
xdg-desktop-menu
xdg-email
xdg-icon-resource
xdg-mime
xdg-open
xdg-screensaver
xdg-settings
xdg-user-dir
xdg-user-dirs-update
xdpyinfo
xeglgears
xeglthreads
xfce4-about
xfce4-panel
xfce4-popup-applicationsmenu
xfce4-popup-directorymenu
xfce4-popup-windowmenu
xfconf-query
xfont
xft-config
xgettext
xicclu
xinit
xkbcomp
xkeystone
xml2-config
xml2po
xmlcatalog
xmlcatmgr
xmllint
xmlsec1
xmlsec1-config
xmlwf
xmodmap
Xorg
Xorg.wrap
xprop
xpstojpeg
xpstopdf
xpstopng
xpstops
xpstosvg
xrandr
xrdb
xrotfontdemo
xsane
xscanimage
xsd
xset
xslt-config
xsltproc
xsubpp
xxd
xxhsum
Back to link Top

Content Y

Utility Description
yat2m
yelp
Back to link Top

Content Z

Utility Description
zeitgeist-daemon
zeitgeist-datahub
zenity
zim
zip
zipcloak
zipcmp
zipdetails
zipgrep
zipinfo
zipmerge
zipnote
zipsplit
ziptool
zlib_decompress
zlib-flate
zmf2raw
zmf2svg
zsh
zsh-5.8
Back to link Top