Difference between revisions of "/usr/local/bin/"

fact, no "graphical" output is possible. AA-lib uses a modern, high-techascii-art renderer in place of outmoded and cumbersome graphical output. WWW: http://aa-project.sourceforge.net/aalib/

Input images compressed with JPEG are also accepted. It is however suggested to only use high quality JPEG files (low compression ratio, large size) because the wavelet compression will increase the defects already present in highly compressed JPEG files.

Simply running "caja-connection-server" will open a simple dialog allowing you to select the server type, and specify the server address, port, and login credentials for the server you want to connect to. This is the same dialog accessible via the Caja "File" menu, and the MATE Desktop "Places" menu.

File Management Preferences allows the user to configure the way caja behaves.

This tool allows the download of new, or update of existing, Certficate Revocation List (CRL) associated with the certificates present in the user (default) or machine stores. The CRL present in the stores are used to determine the validity of unexpired, trusted X.509 certificates. To ensure CRL are always fresh consider automating the updates using the at (or similar) command(s).

lists (CRLs) for X.509 certificates and for downloading the certificates themselves. Dirmngr also handles OCSP requests as an alternative to CRLs. Dirmngr is either invoked internally by gpgsm (from GnuPG 2) or when running as a system daemon through the dirmngr-client tool.

The build architecture is always determined by an external call to dpkg(1), and cannot be set at the command line.

• Update the list of available package versions,
• View the status of installed and available packages,
• Alter package selections and manage dependencies,
• Install new packages or upgrade to newer versions.

box. The coordinates of the box are given by (llx,lly) for the lower left, and (urx,ury) for the upper right, in PostScript units (points).

default in Portable Network Graphics format) suitable for the Web as output.

using fontconfig. If any elements are specified, only those are printed. Otherwise family and style are printed, unless verbose output is requested.

fonts.

parsed result. If --config is given, config substitution is performed on the pattern before being displayed. If --default is given, default substitution is performed on the pattern before being displayed.

prints out font pattern for each face found. If --index is given, only one face of each file is queried, otherwise all faces are queried.

face found.

coverage according to the orthography files in fontconfig. If --index is given, only one face of each file is validated, otherwise all faces are validated.

saved information about how to optimally compute (Fourier) transforms of various sizes. FFTW is a free library to compute discrete Fourier transforms in one or more dimensions, for arbitrary sizes, and of both real and complex data, among other related operations. More information on FFTW can be found at the FFTW home page: http://www.fftw.org

saved information about how to optimally compute (Fourier) transforms of various sizes. FFTW is a free library to compute discrete Fourier transforms in one or more dimensions, for arbitrary sizes, and of both real and complex data, among other related operations. More information on FFTW can be found at the FFTW home page: http://www.fftw.org

about machines on a subnet that respond to SMB name query requests.

can help with key binds. The program is interactive and works on standard input. Individual characters themselves and their hexadecimal values are displayed.

Colour Lines. The game's objective is to align as often as possible five or more objects of the same colour and shape causing them to disappear.

actions can be check, kill, restart, exist, or fix. The action is specified on the command line or is read from a default database, which describes the default action to take for each process. The database format and the meaning of each action are described below.

psdit program so that it works correctly with Angus Duggan's psutils package.

that it works correctly with Angus Duggan's psutils package.

or her own. A line can be horizontal, vertical or diagonal.

The output will be written to standard output unless the --output is specified.

and introspecting GObject based libraries. It is usually invoked during the normal build step for a project and the information is saved to disk and later installed, so that language bindings and other applications can use it. Header files and source files are passed in as arguments on the command line. The suffix determines whether a file be treated as a source file (.c) or a header file (.h). Currently only C based libraries are supported by the scanner.

into the system Global Assembly Cache (GAC) to become part of the assemblies that are available for all applications at runtime.

more D-Bus interfaces. The tool reads D-Bus Introspection XML[1] files and generates output files. The tool currently supports generating C code (via --generate-c-code) and Docbook XML (via --generate-docbook).

and file2, and creates an output which is file2 with added `margin character' (.mc) commands that indicate the differences.

file cnvalias.icu. This binary file can then be read directly by ICU, or used by pkgdata(1) for incorporation into a larger archive or library.

trie dictionary file. Normally this data file has the .dict extension.

java extension and follow the ICU4J naming conventions.

show the differences in behavior

parsing by shell procedures, and to check for legal options.

user's language, by looking up the translation in a message catalog.

See gittutorial(7) to get started, then see giteveryday(7) for a useful minimum set of commands. The Git User's Manual[1] has a more in-depth introduction. After you mastered the basic concepts, you can come back to this page to learn what commands Git offers. You can learn more about individual Git commands with "git help command". gitcli(7) manual page gives you an overview of the command-line command syntax. A formatted and hyperlinked copy of the latest Git documentation can be viewed at https://git.github.io/htmldocs/git.html.

It is highly functional. However, not all methods are implemented, and for those methods that are implemented, not all switches are implemented.

GV (formerly DOT) format. gv2gml converts a graph specified in the GV format to a graph in the GML format.

GNOME ecosystem.

input to the secured socket and vice versa.

gobject-query takes a mandatory argument that specifies whether it should iterate over the fundamental types or print a type tree.

or --backup option. The names of the files to be patched are usually taken from the patch file, but if there's just one file to be patched it can be specified on the command line as originalfile.

the German Sphinx project.

in the GV (formerly DOT) format.

you list and extract resources that have been compiled into a resource file or included in an elf file (a binary or a shared library).

sources and metadata keys. When executed with no SOURCE argument, grlinspect will print the list of all plugins and sources. When executed with a SOURCE, grl-inspect will print information about that source.

the command line.

GStreamer plugins, information about a particular plugin, or information about a particular element. When executed with no PLUGIN or ELEMENT argument, gst-inspect will print a list of all plugins and elements together with a summary. When executed with a PLUGIN or ELEMENT argument, gst-inspect will print information about that plug-in or element.

playback using the playbin element. You can pass it individual files, URIs or whole directories (in which case it will recurse into sub-di-rectories as well).

GLib test framework.

gtester into HTML.

output.

gvfs-less works just like the traditional less utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.

given, it defaults to the current directory. gvfs-ls is similar to the traditional ls utility, but using gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.

to handle a mime-type, or set the default handler for a mime-type.

gvfs locations instead of local files: for example you can use something like smb://server/resource/file.txt as location.

given device or globally. For more information about both the big picture and the semantics of HAL locks, refer to the HAL spec which can be found in /usr/local/share/doc/hal/spec/hal-spec.html depending on the distribution.

Jet 4-series (or newer) printer with groff -Tlj4, using data from an HP tagged font metric (TFM) file. tfm_file is the name of the TFM file for the font; Intellifont and TrueType TFM files are supported, but symbol set TFM files are not. map_file is a file giving the groff names for characters in the font;

no file is specified) from codeset from_name to codeset to_name and outputs the converted text on standard output.

locate it.

All strings are expected to be encoded in the preferred charset used by your locale. Use `--debug' to find out what this charset is. You can override the charset used by setting environment variable CHARSET. To process a string that starts with `-', for example `-foo', use `--' to signal the end of parameters, as in `idn --quiet -a -- -foo'. Mandatory arguments to long options are mandatory for short options too.

verifying the integrity of tablespace files after power outages but can also be used after file copies. Because checksum mismatches will cause InnoDB to deliberately shut down a running server, it can be preferable to use this tool rather than waiting for a server in production usage to encounter the damaged pages.

translate the coded representation from one variant of JPEG to another, for example from baseline JPEG to progressive JPEG or vice versa. It can also perform some rearrangements of the image data, for example turning an image from landscape to portrait format by rotation.

JSON). This program was copied from json_xs and modified.

The type of information to select is selectable on the command line. Several multiplexed Kate streams may be analyzed at the same time.

cache.

by KDE, a D-BUS service to store/retrieve/clean cookies.

for booting UNIX. It executes KDE programs and kdeinit loadable modules (KLMs) starting them more efficiently.

Frameworks installation or user paths.

the KDE Wallet. It works by manipulating the entries displayed in the KDE Wallet Manager utility. It's only parameter is the walletname the tool should read or update. The operation mode is specified by the options.

compare using specified parameters.

whoami operation.

tape file and prints it to standard output.

used by pkgdata(1) for incorporation into a larger archive or library.

standalone window manager.

tasks while Marco is running.

This program demonstrates various kinds of windows that window managers and window manager themes should handle. Be sure to tear off the menu and toolbar, those are also a special kind of window.

implementation and that of a remote server.

The MATE keybindings preference tool enables you to display the default keyboard shortcuts and customize them to your requirements. You can also create hot keys. Hot keys are keyboard shortcuts that start applications or perform other useful actions.

Keyboard Preferences manages all settings related to the keyboard in a MATE environment. This includes key repeat delay, cursor blinking, lay outs and layout options. You can also configure a typing break which locks the screen and enforces a break from work.

By default, mate-panel typically creates a panel on the top of the screen with applets such as a Menu Bar, Notification Area, and Clock; While creating a second panel on the bottom of the screen with a Window List and a Workspace Switcher. Panels can be created, deleted, moved around the desktop, and to other monitors.

and save the snapshot image to a file.

for the user as defined by the system administrator (or the default MATE installation on your system).

This executable is part of the package 'mate-control-center': The MATE Control Center. If you use too much computer you may be risking your health. Use this tool for reminding yourself to take little (typing) breaks in regular intervals.

.NET projects.

standard output using a portable flat-text format understood by the mdb_load(1) utility.

the LMDB environment envpath.

monodoc(1) documentation browser.

• Creating documentation stubs based on ASSEMBLIES. The stub-creation process will create new mdoc(5) XML files for each type within ASSEMBLIES, and provide documentation stubs for each member of those types.
• Update documentation stubs based on ASSEMBLIES. Existing mdoc(5) documentation can be updated to reflect changes within ASSEMBLIES, such as added types and members, while preserving existing documentation.

In some limited circumstances, renames will be tracked, minimizing the documentation burden when e.g. a parameter is renamed.

more FLAC files.

changes.

archives in the ZIP format used by the MS-DOS utility PKZIP. It was written as a demonstration of the zlib(3) library and therefore lack many of the features of the unzip(1) program.

archives in the ZIP format used by the MS-DOS utility PKZIP. It was written as a demonstration of the zlib(3) library and therefore lack many of the features of the unzip(1) program.

copies of the assemblies listed on the command line. By default only the assemblies specified in the command line will be included in the bundle. To automatically include all of the dependencies referenced, use the "--deps" command line option.

with optional Rock Ridge attributes.

bodies. This is useful to reduce an assembly size when an assembly has already been compiled using Mono's Ahead Of Time compiler (AOT), where the CIL code is no longer necessary, but the metadata still is.

ship the minimal possible set of functions that a set of programs might require to run as opposed to the full libraries.

LXR into Mono's certificate store

specified, they will be taken from the first translation. File positions will be cumulated. When using the --unique option, duplicates are discarded.

tables. It reads the MyISAM index file directly, so it must be run on the server host where the table is located. Before using myisam_ftdump, be sure to issue a FLUSH TABLES statement first if the server is running.

file, start the server with a --log-isam=log_file option.

compressing each column in the table separately. Usually, myisampack packs the data file 40% to 70%.

for connections on different Unix socket files and TCP/IP ports. It can start or stop servers, or report their current status.

their tables, or a table's columns or indexes.

MySQL server and to report the timing of each stage. It works as if multiple clients are accessing the server.

the specified pipe and function. The third argument should be either in or out, depending on whether the data should be parsed as a request or a reply.

particular machine. All queries are done over UDP.

latin1, koi8-r, utf8, and cp1047 are valid arguments for the -T option, selecting the output encoding emitted by grotty, groff's TTY output device. If an invalid or no -T option is given, nroff checks the current locale to select a default output device.

files, directories, hard links, and streams; it can read and write files, including streams, sparse files and transparently compressed files; it can handle special files like symbolic links, devices, and FIFOs; moreover it provides standard management of file ownership and permissions, including POSIX ACLs.

authentication function

files to a LDIF format that is understood by LDB.

windows

Program that allows operations on PKCS #11 smart cards and security modules.

server to temporarily suspend access to the audio devices, to allow other applications access them directly. pasuspender will suspend access to the audio devices, fork a child process, and when the child process terminates, resume access again.

and the options required to compile a program to use them. Some of the options apply only to the 8-bit, or 16-bit, or 32-bit libraries, respectively, and are not available if only one of those libraries has been built. If an unavailable option is encountered, the "usage" information is output.

(version 3.03)

PNG/JPEG/TIFF/PDF/PS/EPS/SVG using cairo

verter (version 3.03)

thank-you notes) about perl5 and the modules which ship with it.

applications that use ICU. The typical reason to package files using pkgdata is to make their distribution easier and their loading by ICU faster and less consuming of limited system resources such as file descriptors. Packaged data also allow applications to be distributed with fewer resource files, or even with none at all if they link against the packaged data directly

SYNOPSIS

  Public Attributes
      double x
      double y
      double z

file. This program is deprecated and will be removed in a future release of CUPS.

can process, sending the data to standard output. Currently, this means ASCII characters and `\[uXXXX]' entities, where `XXXX' is a hexadecimal number with four to six digits, representing a Unicode input code. Normally, preconv should be invoked with the -k and -K options of groff.

ghostscript

Conventions.

for use in build scripts. Note that this script is provided for backward compatibility with programs that use pspell. Do not use as it will eventually go away.

The input PostScript file should follow the Adobe Document Structuring Conventions.

The qpdf program is used to convert one PDF file to another equivalent PDF file. It is capable of performing a variety of transformations such as linearization (also known as web optimization or fast web viewing), encryption, and decryption of PDF files. It also has many options for inspecting or checking PDF files, some of which are useful primarily to PDF developers.

Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality.

Quadrapassel comes from the classic falling-block game, Tetris. The goal of the game is to create complete horizontal lines of blocks, which will disappear.

of the RDF query library

Each password is stored in an item. Items are uniquely identified by a set of attribute keys and values. When storing a password you must specify unique pairs of attributes names and values, and when looking up a password you provide the same attribute name and value pairs.

This tool is part of the samba(7) suite. The smbcacls program manipulates NT Access Control Lists (ACLs) on SMB file shares. An ACL is comprised zero or more Access Control Entries (ACEs), which define access restrictions for a specific user or group.