/usr/local/bin/
Welcome to /usr/local/bin/. |
This page is in maintenance! Please do not change this page without to contact the author or use Discussion! |
System Administration Utilities | |
---|---|
/bin/ Tools and applications | /sbin/ System Administration Utilities |
/usr/bin/ Tools and applications | /usr/sbin/ System tools |
/usr/local/bin/ Tools and applications | /usr/local/sbin/ System tools |
Back to the System |
Contents
- 1 Introduction
- 2 Content
- 2.1 Content 0 - A
- 2.2 Content B
- 2.3 Content C
- 2.4 Content D
- 2.5 Content E
- 2.6 Content F
- 2.7 Content G
- 2.8 Content H
- 2.9 Content I
- 2.10 Content J
- 2.11 Content K
- 2.12 Content L
- 2.13 Content M
- 2.14 Content N
- 2.15 Content O
- 2.16 Content P
- 2.17 Content Q
- 2.18 Content R
- 2.19 Content S
- 2.20 Content T
- 2.21 Content U
- 2.22 Content V
- 2.23 Content W
- 2.24 Content X
- 2.25 Content Y
- 2.26 Content Z
Introduction
Here you will find a lot of small applications.
This directory contains more or less 2500 utilities, applications, tools. If you install an application and don't find it as a starter on your taskbar, it is most likely you will find the application in this directory. You can start this application via cli or set a link to your desktop.
Not for all applications in this directory are man pages available.
Content
Extraction of /usr/local/bin/:
Content 0 - A
Utility | Description |
---|---|
7z | A file archiver with highest compression ratio |
a52dec | a52dec - decode ATSC A/52 audio streams |
aafire | aafire, aainfo, aasavefont, aatest - aalib example programs |
aainfo | aafire, aainfo, aasavefont, aatest - aalib example programs |
aalib-config | |
aasavefont | aafire, aainfo, aasavefont, aatest - aalib example programs |
acyclic | acyclic is a filter that takes a directed graph as input and outputs a copy of the graph with sufficient edges reversed to make the graph acyclic. |
addftinfo | addftinfo reads a troff font file and adds some additional font-metric information that is used by the groff system. |
addr2line | addr2line -- translate program addresses to source file names and line numbers |
afmtodit | afmtodit - create font files for use with groff -Tps |
afuse | AFUSE - automounting file system implemented in user-space using FUSE |
ag-backup | ag - The Silver Searcher. Like ack, but faster. |
ag-tool | ag - The Silver Searcher. Like ack, but faster. |
agentxtrap | agentxtrap - send an AgentX NotifyPDU to an AgentX master agent |
agrep | agrep - search a file for a string or regular expression, with approximate matching capabilities |
al | al, al2 - Mono Assembly Linker |
al2 | al, al2 - Mono Assembly Linker |
analyze | The analyze command displays the rotation and fallback angles, surface area, and plane equation for each face of the ARB specified on the command line. |
appletviewer | appletviewer - Runs applets outside of a web browser. |
ar | ar, ranlib -- manage archives |
array | Arrays can have fixed size, or can grow automatically as needed. A default value is used for entries that have not been explicitly set. |
as | AS - the portable GNU assembler. |
aspell | aspell is a utility program that connects to the Aspell library so that it can function as an ispell -a replacement, as an independent spell checker, as a test utility to test out Aspell library features, and as a utility for managing dictionaries used by the library. |
aspell-import | aspell-import is a command that will search for old personal dictionaries and will import them into GNU Aspell. It will look for both Ispell and Aspell dictionaries. To use it just run it from the command prompt. |
atril | Atril - The MATE Document Viewer |
aucat | aucat -- audio files manipulation tool |
audio2tape | audio2tape -- Sinclair ZX Spectrum audio to tape file co |
autopoint | autopoint - copies standard gettext infrastructure |
Content B
Utility | Description |
---|---|
baobab | Baobab is a disk space analyzer for GNOME |
bash | Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). |
bashbug | bashbug - report a bug in bash |
bcomps | bcomps decomposes graphs into their biconnected components, printing the components to standard output. |
bounce | The bounce(8) daemon maintains per-message log files with delivery status information. |
brasero | Brasero is a disc burning application. It is designed to be simple and easy to use. It allows to create data CD/DVD, audio CD, to copy CD/DVD and to burn images. It has some nices features, such as a song, image and video previewer. It can also search for files (thanks to beagle) and display a playlist and its contents. |
bsdcat | bsdcat typically takes a filename as an argument or reads standard input when used in a pipe. In both cases decompressed data it written to standard output. |
bsdcpio | cpio copies files between archives and directories. This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom images and can create tar, pax, cpio, ar, and shar archives. |
bsdtar | tar creates and manipulates streaming archive files. This implementation can extract from tar, pax, cpio, zip, jar, ar, xar, rpm, 7-zip, and ISO9660 cdrom images and can create tar, pax, cpio, ar, zip, 7-zip, and shar archives. |
btcflash | Btcflash is used to read update the Firmware for a BTC DRW1008 DVD+/-RW recorder. |
bzz | bzz - DjVu general purpose compression utility. |
Back to Top |
Content C
Utility | Description |
---|---|
c44 | C44 produces a DjVuPhoto encoded image. The input image file inputfilename can be either a portable gray-map (PGM) or a portable pix-map PPM).
Input images compressed with JPEG are also accepted. It is however suggested to only use high quality JPEG files (low compression ratio, large size) because the wavelet compression will increase the defects already present in highly compressed JPEG files. |
c++9 | |
cairo-sphinx | |
cairo-trace | |
caja | Caja - The MATE File Manager |
caja-autorun-software | caja-autorun-software - Autorun Software in Caja |
caja-connect-server | Caja Connect Server is the connection manager for Caja/MATE. It is provided as a part of the Caja package for the MATE Desktop Environment.
Simply running "caja-connection-server" will open a simple dialog allowing you to select the server type, and specify the server address, port, and login credentials for the server you want to connect to. This is the same dialog accessible via the Caja "File" menu, and the MATE Desktop "Places" menu. |
caja-file-management-properties | Caja File Management Properties is distributed as a part of the caja package and is used to configure Caja's preferences. It is typically accessible through the "Edit" menu in Caja browser windows, or by pressing "ALT+E" and then "N" once the menu opens.
File Management Preferences allows the user to configure the way caja behaves. |
caja-sendto | caja-sendto - convenience application to send a file via email or instant messenger |
canberra-gtk-play | |
cancel | |
caspol | |
cb2ti3 | |
cbc | cbc - Couchbase Client Commandline Utility |
cccheck | cccheck- Perform static code contracts verification for CLR assemblies. |
ccomps | ccomps - connected components filter for graphs |
ccrewrite | ccrewrite - Rewrite CLR assemblies for runtime code contract verification. |
cctiff | |
ccxxmake | |
cd-convert | cd-it8 - Color Manager Testing Tool |
cd-create-profile | |
cd-drive | cd-drive - show CD-ROM drive characteristics |
cd-fix-profile | |
cd-iccdump | |
cd-info | cd-info - shows Information about a CD or CD-image |
cd-it8 | cd-it8 - Color Manager Testing Tool |
cd-paranoia | cd-paranoia 9.8 (Paranoia release III via libcdio) - an audio CD reading utility which includes extra data verification features |
cd-read | cd-read - reads Information from a CD or CD-image |
cdda2wav | cdda2wav - dumps CD audio data into sound files with extra data verification |
cdda-player | |
cddb_query | |
cdparanoia | cdparanoia (Paranoia release III) - an audio CD reading utility which includes extra data verification features |
cdr2raw | |
cdr2text | |
cdr2xhtml | |
cdrdao | cdrdao - reads and writes CDs in disc-at-once mode |
cdrecord | Cdrecord is used to record data or audio Compact Discs on an Orange Book CD-recorder, to write DVD media on a DVD-recorder or to write BluRay media on a BluRay-recorder. |
cert2spc | cert2spc - Transform multiple X.509 certificates to a Software Publisher Certificate |
cert-sync | cert-sync - Mono Certificate Store Sync Tool |
certmgr | certmgr - Mono Certificate Manager (CLI version) |
certtool | certtool - GnuTLS certificate tool |
certutil | |
chardetect-3.7 | |
chartread | |
chattr | chattr - change file attributes on a Linux file system |
checkmk | checkmk - Awk script for generating C unit tests for use with the Check unit testing framework. |
checkXML5 | checkXML5 - An XML lint tool for KDE DocBook XML documents. |
cheese | cheese - tool to take pictures and videos from your webcam |
cheetah | |
cheetah-analyze | |
cheetah-compile | |
chem | chem - groff preprocessor for producing chemical structure diagrams |
cherryd-2.7 | |
cherrytree | |
chktrust | chktrust - Check the trust of a PE executable. |
chm_http | |
chmorph | |
chrome | chromium-browser - the web browser from Google |
chromedriver | |
cifsdd | cifsdd - convert and copy a file over SMB, This tool is part of the samba(7) suite. |
cinnamon-desktop-migrate-mediakeys | |
cjb2 | cjb2 - Simple DjVuBitonal encoder. |
cjpeg | cjpeg - compress an image file to a JPEG file |
cjs-console | |
ck-history | |
ck-launch-session | |
ck-list-sessions | |
clang80 | |
classpath | |
clear-color | |
clear-fbo | |
clear-fbo-scissor | |
clear-fbo-tex | |
clear-random | |
clear-repeat | |
clear-scissor | |
clear-undefined | |
clearspd | |
clp | |
cluster | cluster - find clusters in a graph and augment the graph with this information. |
cmis-client | |
cmsutil | |
cmx2raw | |
cmx2text | |
cmx2xhtml | |
collink | |
colormgr | |
colprof | |
colverify | |
com.github.danrabbit.lookbook | |
contractor | |
convolutions | |
copypix | |
copytex | |
corelist | corelist - a commandline frontend to Module::CoreList |
corpus2array | |
corrupt_mpeg2 | |
cpaldjvu | cpaldjvu - DjVuDocument encoder for low-color images. |
cpan | This script provides a command interface (not a shell) to CPAN. At the moment it uses CPAN.pm to do the work, but it is not a one-shot command runner for CPAN.pm. |
cpp9 | |
createfpx | |
createhdf | |
createwin | |
crlupdate | crlupdate - Mono Certficate Revocation List Downloader and Updater
This tool allows the download of new, or update of existing, Certficate Revocation List (CRL) associated with the certificates present in the user (default) or machine stores. The CRL present in the stores are used to determine the validity of unexpired, trusted X.509 certificates. To ensure CRL are always fresh consider automating the updates using the at (or similar) command(s). |
crlutil | |
croco-0.6-config | |
csc | csc - driver program for the CHICKEN Scheme compiler |
cscope | cscope - interactively examine a C program |
csepdjvu | csepdjvu - DjVu encoder for separated data files. |
csharp | csharp, gsharp - Interactive C# Shell |
csi | The CHICKEN Scheme interpreter |
csslint-0.6 | |
cubemap | |
cuberender | |
cue2toc | Cue2toc converts cuefile from CUE to TOC format and writes the result to tocfile. If either cuefile or tocfile is omitted or a single dash "-" cue2toc reads from standard input and writes to standard ouput respectively. |
cups-calibrate | cups-calibrate - ESP CUPS Printer Calibration Tool This program allows you to calibrate the color output of printers using the Gutenprint CUPS driver. Please note that this program only works with the Gutenprint CUPS driver. |
cups-config | cups-config - get cups api, compiler, directory, and link information. |
cupstestdsc | cupstestdsc tests the conformance of PostScript files to the Adobe PostScript Language Document Structuring Conventions Specification version 3.0. The results of testing and any other output are sent to the standard output. The second form of the command reads PostScript from the standard input. |
cupstestppd | cupstestppd tests the conformance of PPD files to the Adobe PostScript Printer Description file format specification version 4.3. It can also be used to list the supported options and available fonts in a PPD file. The results of testing and any other output are sent to the standard output. |
curl | curl is a tool to transfer data from or to a server, using one of the supported protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMB, SMBS, SMTP, SMTPS, TELNET and TFTP). The command is designed to work without user interaction. |
curl-config | curl-config - Get information about a libcurl installation |
cvlc | |
cvsps | CVSps - create patchset information from CVS |
cvt | cvt - calculate VESA CVT mode lines |
cvtsudoers | |
cwebp | cwebp - compress an image file to a WebP file |
cxpm | cxpm - Check an XPM (X PixMap) file, versions XPM 1, 2, or 3. |
Back to Top |
Content D
Utility | Description |
---|---|
dav1d | |
dazzle-list-counters | |
dbus-binding-tool | dbus-binding-tool - C language GLib bindings generation utility. |
dbus-cleanup-sockets | dbus-cleanup-sockets - clean up leftover sockets in a directory |
dbus-daemon | dbus-daemon - Message bus daemon |
dbus-launch | dbus-launch - Utility to start a message bus from a shell script |
dbus-monitor | dbus-monitor - debug probe to print message bus messages |
dbus-run-session | dbus-run-session - start a process as a new D-Bus session |
dbus-send | dbus-send - Send a message to a message bus |
dbus-test-tool | dbus-test-tool - D-Bus traffic generator and test tool |
dbus-update-activation-environment | dbus-update-activation-environment - update environment used for D-Bus session services |
dbus-uuidgen | dbus-uuidgen - Utility to generate UUIDs |
dbwrap_tool | dbwrap_tool - low level TDB/CTDB manipulation tool using the dbwrap interface. This tool is part of the samba(7) suite. |
dcadec | dcadec - decode DTS Coherent Acoustics audio streams |
dconf | dconf - Simple tool for manipulating a dconf database |
dconf-editor | The dconf-editor program provides a graphical interface for editing settings that are stored in the dconf database. |
ddjvu | ddjvu - Command line DjVu decoder. |
derb | derb reads the compiled resource bundle files passed on the command line and write them back in text form. The resulting text files have a .txt extension while compiled resource bundle source files typically have a .res extension. |
derdump | Derdump dumps a DER structure read from a file or, if none is specified, from standard input to standard output. It is mainly intended as a debugging tool. |
deriv | |
desktop-file-install | The desktop-file-install program is a tool to install, and optionally edit, desktop files. The desktop-file-edit program is a tool to edit a desktop file. They are mostly useful for developers and packagers. |
desktop-file-validate | desktop-file-validate - Validate desktop entry files |
desktoptojson | desktoptojson - Converts a .desktop file to a .json file. |
devdump | devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images. |
dht-example | |
diagtool80 | |
diffimg | diffimg - Calculates intersection between two images |
dijkstra | dijkstra - single-source distance filter |
ding | ding is a dictionary lookup program for X Windows/Unix. It comes with a German-English dictionary with about 345,000 entries. |
dinoshade | |
dirmngr | Dirmngr is a server for managing and downloading certificate revocation
lists (CRLs) for X.509 certificates and for downloading the certificates themselves. Dirmngr also handles OCSP requests as an alternative to CRLs. Dirmngr is either invoked internally by gpgsm (from GnuPG 2) or when running as a system daemon through the dirmngr-client tool. |
dirmngr-client | dirmngr-client - Tool to access the Dirmngr services |
disco | disco is a tool for discovering web services and for retireving the documents that describe those services. |
dispcal | |
dispread | |
dispwin | |
dissolve | |
djpeg | djpeg decompresses the named JPEG file, or the standard input if no file is named, and produces an image file on the standard output. PBM-PLUS (PPM/PGM), BMP, GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. |
djvm | djvm - Manipulate bundled multi-page DjVu documents. |
djvmcvt | djvmcvt - Convert multi-page DjVu documents. |
djvudigital | djvudigital - creates DjVu files from PS or PDF files. |
djvudump | djvudump - Display internal structure of DjVu files. |
djvuextract | djvuextract - Extract chunks from DjVu image files |
djvumake | djvumake - Assemble DjVu image files. |
djvups | djvups - Convert DjVu documents to PostScript. |
djvused | djvused - Multi-purpose DjVu document editor. |
djvuserve | Program djvuserve is a CGI program that can be executed by a HTTP server for serving DjVu documents. This program is able to conver |
djvutoxml | djvutoxml, djvuxmlparser - DjVuLibre XML Tools; The DjVuLibre XML Tools provide for editing the metadata, hyperlinks and hidden text associated with DjVu files. Unlike djvused(1) the DjVuLibre XML Tools rely on the XML technology and can take advantage of XML editors and verifiers. |
djvutxt | djvutxt - Extract the hidden text from DjVu documents. |
djvuxmlparser | djvutoxml, djvuxmlparser - DjVuLibre XML Tools; The DjVuLibre XML Tools provide for editing the metadata, hyperlinks and hidden text associated with DjVu files. Unlike djvused(1) the DjVuLibre XML Tools rely on the XML technology and can take advantage of XML editors and verifiers. |
dlist-begin-call-end | |
dlist-dangling | |
dlist-degenerate | |
dlist-edgeflag | |
dlist-edgeflag-dangling | |
dlist-flat-tri | |
dlist-mat-tri | |
dlist-recursive-call | |
dlist-tri-flat-tri | |
dlist-tri-mat-tri | |
dm-tool | dm-tool - a tool to control the display manager |
dmcs | |
doas | doas -- execute commands as another user |
dot | dot - filter for drawing directed graphs |
dot_builtins | |
dotty | dotty is a graph editor for the X Window System. It may be run as a standalone editor, or as a front end for applications that use graphs. It can control multiple windows viewing different graphs. |
dpkg | dpkg is a tool to install, build, remove and manage Debian packages. |
dpkg-architecture | dpkg-architecture provides a facility to determine and set the build and host architecture for package building.
The build architecture is always determined by an external call to dpkg(1), and cannot be set at the command line. |
dpkg-buildflags | dpkg-buildflags is a tool to retrieve compilation flags to use during build of Debian packages. |
dpkg-buildpackage | dpkg-buildpackage - build binary or source packages from sources |
dpkg-checkbuilddeps | This program checks the installed packages in the system against the build dependencies and build conflicts listed in the control file. If any are not met, it displays them and exits with a nonzero return code. |
dpkg-deb | dpkg-deb packs, unpacks and provides information about Debian archives. |
dpkg-distaddfile | dpkg-distaddfile adds an entry for a named file to debian/files. |
dpkg-divert | dpkg-divert is the utility used to set up and update the list of diversions. |
dpkg-genbuildinfo | dpkg-genbuildinfo reads information from an unpacked and built Debian source tree and from the files it has generated and generates a Debian control file describing the build environment and the build artifacts (.buildinfo file). |
dpkg-genchanges | dpkg-genchanges reads information from an unpacked and built Debian source tree and from the files it has generated and generates a Debian upload control file (.changes file). |
dpkg-gencontrol | dpkg-gencontrol reads information from an unpacked Debian source tree and generates a binary package control file (which defaults to debian/tmp/DEBIAN/control); during this process it will simplify the relation fields. |
dpkg-gensymbols | dpkg-gensymbols scans a temporary build tree (debian/tmp by default) looking for libraries and generates a symbols file describing them. This file, if non-empty, is then installed in the DEBIAN subdirectory of the build tree so that it ends up included in the control information of the package. |
dpkg-maintscript-helper | dpkg-maintscript-helper - works around known dpkg limitations in maintainer scripts |
dpkg-mergechangelogs | dpkg-mergechangelogs - 3-way merge of debian/changelog files |
dpkg-name | This manual page documents the dpkg-name program which provides an easy way to rename Debian packages into their full package names. A full package name consists of package_version_architecture.package-type as specified in the control file of the package. The version part of the filename consists of the upstream version information optionally followed by a hyphen and the revision information. The package-type part comes from that field if present or fallbacks to deb. |
dpkg-parsechangelog | dpkg-parsechangelog reads and parses the changelog of an unpacked Debian source tree and outputs the information in it to standard output in a machine-readable form. |
dpkg-query | dpkg-query - a tool to query the dpkg database |
dpkg-scanpackages | dpkg-scanpackages sorts through a tree of Debian binary packages and creates a Packages file, used by apt(8), dselect(1), etc, to tell the user what packages are available for installation. These Packages files are the same as those found on Debian archive sites and CD-ROMs. You might use dpkg-scanpackages yourself if making a directory of local packages to install on a cluster of machines. |
dpkg-scansources | dpkg-scansources scans the given binary-dir for .dsc files. These are used to create a Debian source index, which is output to stdout. |
dpkg-shlibdeps | dpkg-shlibdeps - generate shared library substvar dependencies |
dpkg-source | dpkg-source - Debian source package (.dsc) manipulation tool |
dpkg-split | dpkg-split splits Debian binary package files into smaller parts and reassembles them again, to support the storage of large package files on small media such as floppy disks. |
dpkg-statoverride | dpkg-statoverride - override ownership and mode of files |
dpkg-trigger | dpkg-trigger is a tool to explicitly activate triggers and check for its support on the running dpkg. |
dpkg-vendor | dpkg-vendor is a tool to query information about vendors listed in /usr/local/etc/dpkg/origins. /usr/local/etc/dpkg/origins/default contains information about the current vendor. |
draw2arrays | |
drawarrays | |
drawelements | |
drawelements-large | |
drawoverhead | |
drawpix | |
drawrange | |
dropbox | dropbox - A command line interface to the Dropbox service |
dsbmc | |
dsbmc-cli | dsbmc-cli is a command-line client for DSBMD that provides a simple interface to query information about storage devices, and to send requests to mount, unmount and eject these. |
dselect | dselect is one of the primary user interfaces for managing packages on a Debian system. At the dselect main menu, the system administrator can:
|
dsymutil80 | |
dtd2rng | |
dtd2xsd | dtd2xsd - XML Schema generator from XML document that contains DTD. |
dtsdec | |
dumpmscat | |
dumpsexp | |
dvd-ram-control | |
dvd+rw-booktype | |
dvd+rw-format | |
dvd+rw-mediainfo | |
dvipdf | dvipdf - Convert TeX DVI file to PDF using ghostscript and dvips |
dwebp | dwebp - decompress a WebP file to an image file |
dwp | |
Back to Top |
Content E
Content F
Content G
Content H
Content I
Utility | Description |
---|---|
iagno | |
ibus | |
ibus-daemon | |
ibus-setup | |
iccdump | |
iccgamut | |
icclu | |
iconv | |
icu-config | |
icuinfo | |
identity | |
idevice_id | |
idevicebackup | |
idevicebackup2 | |
idevicecrashreport | |
idevicedate | |
idevicedebug | |
idevicedebugserverproxy | |
idevicediagnostics | |
ideviceenterrecovery | |
ideviceimagemounter | |
ideviceinfo | |
idevicename | |
idevicenotificationproxy | |
idevicepair | |
ideviceprovision | |
idevicescreenshot | |
idevicesyslog | |
idle2.7 | |
idle3.6 | |
idle3.7 | |
idn | |
idn2 | |
ifuse | |
ikdasm | |
ilasm | |
illumread | |
img2webp | |
imgcmp | |
imginfo | |
includeres | |
indexinfo | |
indxbib | |
innochecksum | |
install-printerdriver | |
installvst | |
instmodsh | |
invprofcheck | |
ipers | |
ipf-mod.pl | |
ippfind | |
iproxy | |
iptc | |
irb26 | |
iso-info | |
iso-read | |
isodebug | |
isodump | devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images. |
isoinfo | devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images. |
isosurf | |
isovfy | devdump, isoinfo, isovfy, isodump - Utility programs for dumping and verifying iso9660 images. |
ispellaff2myspell | |
Back to Top |
Content J
Content K
Content L
Content M
Content N
Content O
Content P
Content Q
Content R
Content S
Content T
Content U
Content V
Content W
Content X
Content Y
Utility | Description |
---|---|
yat2m | |
yelp | |
Back to Top |