Init.d
From GhostBSD Wiki
Welcome to  Init.d.
|
Introduction
Here we will find all scripts to run OpenRC on GhostBSD.
Content
| Name | Description |
|---|---|
| /etc/init.d/abi | |
| /etc/init.d/accounting | Rotate the accounting logs |
| /etc/init.d/adjkerntz | Sets the local clock to UTC or Local Time. Saves the current time in the BIOS. |
| /etc/init.d/amd | amd_map_program |
| /etc/init.d/apm | Advanced power management |
| /etc/init.d/apmd | Advanced power management daemon |
| /etc/init.d/archdep | hw.machine_arch |
| /etc/init.d/auditd | Audit daemon |
| /etc/init.d/auditdistd | Audit trail files distribution daemon |
| /etc/init.d/automount | NFS Automount Client; desktop_generator="/usr/local/bin/trueos-mount" |
| /etc/init.d/automountd | using start-stop-daemon |
| /etc/init.d/autounmountd | |
| /etc/init.d/bgfsck | Run fsck in background |
| /etc/init.d/blacklistd | System blacklist daemon |
| /etc/init.d/bluetooth | Bluetooth setup script |
| /etc/init.d/bootmisc | Dummy service for boot services |
| /etc/init.d/bootparams | Boot parameter daemon |
| /etc/init.d/bridge | Network bridge setup |
| /etc/init.d/bsnmpd | Simple and extensible SNMP daemon |
| /etc/init.d/bthidd | OpenRC service file for the "hcsecd" daemon |
| /etc/init.d/ccd | Concatenated disks setup |
| /etc/init.d/cfumass | Configure the LUN for device mode USB mass storage |
| /etc/init.d/cleanvar | Purge /var directory |
| /etc/init.d/cleartmp | Purge /tmp directory; Make /tmp location variable for easier debugging. |
| /etc/init.d/cron | Daemon to execute scheduled commands |
| /etc/init.d/ctld | CAM Target Layer / iSCSI target daemon |
| /etc/init.d/ddb | DDB kernel debugger |
| /etc/init.d/devd | Device State Change Daemon |
| /etc/init.d/devfs | devfs_rulesets_from_file file, reads a set of devfs commands from file, and creates the specified rulesets with their rules. Returns non-zero if there was an error. |
| /etc/init.d/devmatch | Use devmatch(8) to load kernel modules |
| /etc/init.d/dhcpcd | command=/sbin/dhcpcd; command_args="-q" |
| /etc/init.d/dhcpcd.em0 | |
| /etc/init.d/dhcpcd.nfe0 | |
| /etc/init.d/dmesg | Save kernel boot messages to disk |
| /etc/init.d/dumpon | Configures a specific kernel dump device |
| /etc/init.d/earlykld | Loading early kernel modules:'for _kld in $early_kld_list ; do load_kld -e ${_kld}.ko $_kld |
| /etc/init.d/encswap | |
| /etc/init.d/fsck | Check and repair filesystems according to /etc/fstab |
| /etc/init.d/ftp-proxy | Internet File Transfer Protocol proxy daemon |
| /etc/init.d/ftpd | Internet File Transfer Protocol daemon |
| /etc/init.d/functions.sh | Allow any sh script to work with einfo functions and friends; Code common to scripts that need to load a kernel module if it isn't in the kernel yet. Syntax: load_kld [-e regex] [-m module] file where -e or -m chooses the way to check if the module |
| /etc/init.d/gbde | GEOM Based Disk Encryption |
| /etc/init.d/gptboot | gpart shows disk to start boot, freebsd-ufs |
| /etc/init.d/growfs | This allows us to distribute a image and have it work on essentially any size drive. TODO: Figure out where this should really be ordered. I suspect it should go just after fsck but before mountcritlocal.
Grow root partition to fill device |
| /etc/init.d/growzfs | This script will dynamically resize the ZFS boot pool at startup |
| /etc/init.d/gssd | Generic Security Services Daemon |
| /etc/init.d/hastd | Highly Available Storage daemon |
| /etc/init.d/hcsecd | Control link keys and PIN codes for Bluetooth devices |
| /etc/init.d/hostapd | Authenticator for IEEE 802.11 networks |
| /etc/init.d/hostid | First we check to see if there is a system UUID. If so then we use that and erase the hostid file, otherwise we generate a random UUID. |
| /etc/init.d/hostid_save | Save unique host ID to disk |
| /etc/init.d/hostname | Sets the hostname of the machine |
| /etc/init.d/inetd | Internet \"super-server\" |
| /etc/init.d/iovctl | command="/usr/sbin/iovctl" |
| /etc/init.d/ipfs | Saves and restores information for NAT and state tables |
| /etc/init.d/ipfw | Firewall, traffic shaper, packet scheduler, in-kernel NAT |
| /etc/init.d/ipfw_netflow | irewall, ipfw, netflow |
| /etc/init.d/ipropd_master | command="/usr/libexec/ipropd-master" |
| /etc/init.d/ipropd_slave | command="/usr/libexec/ipropd-slave" |
| /etc/init.d/ipsec | Internet Protocol Security protocol |
| /etc/init.d/iscsictl | command="/usr/bin/${name}" and command_args="${iscsictl_flags}" |
| /etc/init.d/iscsid | iSCSI initiator daemon |
| /etc/init.d/jail | Manage system jails |
| /etc/init.d/kadmind | command_args="$command_args &" |
| /etc/init.d/kdc | command_args="$command_args --detach" |
| /etc/init.d/keyserv | command="/usr/sbin/${name}" |
| /etc/init.d/kfd | after network; keyword -shutdown |
| /etc/init.d/kldxref | Generate hints for the kernel loader |
| /etc/init.d/kpasswdd | command_args="$command_args &" |
| /etc/init.d/ldconfig | command=/sbin/ldconfig |
| /etc/init.d/local | Run /etc/rc.local and /etc/shutdown.local" |
| /etc/init.d/local_unbound | Local caching forwarding resolver |
| /etc/init.d/localmount | Mounts disks and swap according to /etc/fstab |
| /etc/init.d/lockd | command=/usr/sbin/rpc.lockd |
| /etc/init.d/lpd | Line printer spooler daemon |
| /etc/init.d/mdconfig | OpenRC -> rc.d redirect script, create and control memory disks |
| /etc/init.d/mdconfig2 | Create and control memory disks (stage 2) |
| /etc/init.d/mixer | extra_commands="restore" |
| /etc/init.d/modules | Loads a user defined list of kernel modules. |
| /etc/init.d/motd | # Update kernel info in /etc/motd; Must be done *before* interactive logins are possible to prevent possible race conditions. |
| /etc/init.d/mountd |
|
| /etc/init.d/mountlate | Mount filesystems with \"late\" option from /etc/fstab |
| /etc/init.d/moused | Console Mouse Daemon |
| /etc/init.d/moused.ums0 | Console Mouse Daemon |
| /etc/init.d/moused.ums1 | Console Mouse Daemon |
| /etc/init.d/natd | Needed for network scripts |
| /etc/init.d/netmount | Mounts network shares according to /etc/fstab. |
| /etc/init.d/network | Until we can determine why devd is throwing some bogus |
| /etc/init.d/newsyslog | name="newsyslog" required_files="/etc/newsyslog.conf" command="/usr/sbin/${name}" |
| /etc/init.d/nfscbd | name="nfscbd" command="/usr/sbin/${name}" |
| /etc/init.d/nfsclient | command=/usr/sbin/rpc.statd; command_args=$lockd_args |
| /etc/init.d/nfsd | Load the nfsd kernel module |
| /etc/init.d/nfsuserd | NFSv4 User Services |
| /etc/init.d/nisdomain | Set NIS domain name |
| /etc/init.d/nscd | Name Service Cache Daemon |
| /etc/init.d/nsswitch | Name-service switch |
| /etc/init.d/ntpd | Network Time Protocol daemon |
| /etc/init.d/ntpdate | Set the date and time via NTP |
| /etc/init.d/pf | Packet Filter |
| /etc/init.d/pflog | Packet filter logging interface |
| /etc/init.d/powerd | Power Control Daemon |
| /etc/init.d/ppp | Point to point protocol connections |
| /etc/init.d/rarpd | Reverse ARP Daemon |
| /etc/init.d/rc-enabled | Starting and stopping local rc services |
| /etc/init.d/resolv | create /etc/resolv.conf from kenv |
| /etc/init.d/root | Mount the root fs read/write |
| /etc/init.d/routing | Routing setup |
| /etc/init.d/rpcbind | RPC program number mapper |
| /etc/init.d/runsvdir | command=/usr/bin/runsvdir |
| /etc/init.d/rwho | name="rwhod" rcvar="rwhod_enable" command="/usr/sbin/${name}" |
| /etc/init.d/s6-svscan | Creating s6 scan directory and stopping any remaining s6 services |
| /etc/init.d/savecache | Saves the caches OpenRC uses to non volatile storage |
| /etc/init.d/savecore | Saves a kernel dump. |
| /etc/init.d/sdpd | Bluetooth Service Discovery Protocol daemon |
| /etc/init.d/sendmail | Sendmail startup script |
| /etc/init.d/sshd | command=/usr/sbin/sshd |
| /etc/init.d/statd | command=/usr/sbin/rpc.statd |
| /etc/init.d/staticroute | Configures static routes |
| /etc/init.d/swap | Activating swap devices; Deactivating swap devices |
| /etc/init.d/syscons | Setting mode to $allscreen_flags for all screens |
| /etc/init.d/sysctl | BSD_sysctl() |
| /etc/init.d/syslogd | command=/usr/sbin/syslogd |
| /etc/init.d/timed | Time server daemon |
| /etc/init.d/tmp | Configure tmpfs |
| /etc/init.d/tmpfiles.setup | Set up tmpfiles.d entries |
| /etc/init.d/ubthidhci | command="/usr/sbin/usbconfig" |
| /etc/init.d/urandom | Initializes the random number generator. |
| /etc/init.d/var | NFS /var is not supported, unless NFS /var is part of diskless NFS / |
| /etc/init.d/watchdogd | name="watchdogd" command="/usr/sbin/${name}" |
| /etc/init.d/wpa_supplicant | find_wireless() |
| /etc/init.d/ypbind | NIS domain binding daemon |
| /etc/init.d/ypldap | NIS LDAP binding daemon |
| /etc/init.d/yppasswdd | Server for updating NIS passwords |
| /etc/init.d/ypserv | NIS database server |
| /etc/init.d/ypset | tell ypbind(8) which YP server process to use |
| /etc/init.d/ypupdated | name="ypupdated" command="/usr/sbin/rpc.${name}" |
| /etc/init.d/ypxfrd | NIS map transfer server |
| /etc/init.d/zfs | Starting ZFS |
| /etc/init.d/zfsd | name="zfsd" command="/usr/sbin/${name}" |
| /etc/init.d/zvol | Starting ZFS swap |
Back to  /etc/
| |
