Difference between revisions of "/usr/local/sbin/"

Latest revision as of 05:47, 13 April 2020

Welcome to /usr/local/sbin/.

System Administration Utilities

/bin/ Tools and applications	/sbin/ System Administration Utilities
/usr/bin/ Tools and applications	/usr/sbin/ System tools
/usr/local/bin/ Tools and applications	/usr/local/sbin/ System tools

Back to the System

Introduction[edit]

Here you will find a lot of small applications, you don't find on your desktop task bar. No starter is there but on your computer. You can use them only on the cli. All commands are connected to the man pages. So you can read how to use them.

Content[edit]

Content of /usr/local/sbin/

Utility	Description
accept	The cupsaccept command instructs the printing system to accept print jobs to the specified destinations.
addgnupghome	addgnupghome - Create .gnupg home directories; If GnuPG is installed on a system with existing user accounts, it is sometimes required to populate the GnuPG home directory with existing files. Especially a `trustlist.txt' and a keybox with some initial certificates are often desired. This scripts help to do this by copying all files from `/etc/skel/.gnupg' to the home directories of the accounts given on the command line. It takes care not to overwrite existing GnuPG home directories.
applygnupgdefaults	applygnupgdefaults - Run gpgconf --apply-defaults for all users.
avahi-daemon	The Avahi mDNS/DNS-SD daemon implements Apple's Zeroconf architecture (also known as "Rendezvous" or "Bonjour"). The daemon registers local IP addresses and static services using mDNS/DNS-SD and provides two IPC APIs for local programs to make use of the mDNS record cache the avahi-daemon maintains. First there is the so called "simple protocol" which is used exclusively by avahi-dnsconfd (a daemon which configures unicast DNS servers using server info published via mDNS) and nss-mdns (a libc NSS plugin, providing name resolution via mDNS). Finally there is the D-Bus interface which provides a rich object oriented interface to D-Bus enabled applications.
avahi-dnsconfd	avahi-dnsconfd connects to a running avahi-daemon and runs the script /home/lennart/tmp/avahi/usr/local/etc/avahi/dnsconfd.action for each unicast DNS server that is announced on the local LAN. This is useful for configuring unicast DNS servers in a DHCP-like fashion with mDNS.
badblocks	badblocks is used to search for bad blocks on a device (usually a disk partition). device is the special file corresponding to the device (e.g /dev/hdc1).
biosdecode	biosdecode parses the BIOS memory and prints information about all structures (or entry points) it knows of.
blkid	blkid - command-line utility to locate/print block device attributes
bonobo-activation-sysconf	This is a component and compound document system for GNOME-2
ck-log-system-restart
ck-log-system-start
ck-log-system-stop
console-kit-daemon	ConsoleKit manages console logins in graphical mode
cracklib-check	CrackLib is a library containing a C function which may be used in a passwd(1)-like program. The idea is simple: try to prevent users from choosing passwords that could be guessed by Crack by filtering them out, at source.
cracklib-format	CrackLib is a library containing a C function which may be used in a passwd(1)-like program. The idea is simple: try to prevent users from choosing passwords that could be guessed by Crack by filtering them out, at source.
cracklib-packer	CrackLib is a library containing a C function which may be used in a passwd(1)-like program. The idea is simple: try to prevent users from choosing passwords that could be guessed by Crack by filtering them out, at source.
cracklib-unpacker	CrackLib is a library containing a C function which may be used in a passwd(1)-like program. The idea is simple: try to prevent users from choosing passwords that could be guessed by Crack by filtering them out, at source.
create-cracklib-dict	CrackLib is a library containing a C function which may be used in a passwd(1)-like program. The idea is simple: try to prevent users from choosing passwords that could be guessed by Crack by filtering them out, at source.
cups-browsed	cups-browsed - A daemon for browsing the Bonjour broadcasts of shared, remote CUPS printers
cups-genppd.5.3	cups-genppd - generate Gutenprint PPD files for use with CUPS
cups-genppdupdate	cups-genppdupdate regenerates the Gutenprint PPD files in use by CUPS, using the PPD files under /usr/local/share/cups/model/gutenprint as templates.
cupsaccept	The cupsaccept command instructs the printing system to accept print jobs to the specified destinations.
cupsaddsmb	The cupsaddsmb program exports printers to the SAMBA software (version 2.2.0 or higher) for use with Windows clients. Depending on the SAMBA configuration, you may need to provide a password to export the printers. This program requires the Windows printer driver files.
cupsctl	cupsctl updates or queries the cupsd.conf file for a server. When no changes are requested, the current configuration values are written to the standard output in the format "name=value", one per line.
cupsd	cupsd is the scheduler for CUPS. It implements a printing system based upon the Internet Printing Protocol, version 2.1, and supports most of the requirements for IPP Everywhere. If no options are specified on the command-line then the default configuration file /usr/local/etc/cups/cupsd.conf will be used.
cupsdisable	cupsdisable, cupsenable - stop/start printers and classes, cupsenable starts the named printers or classes while cupsdisable stops the named printers or classes.
cupsenable	cupsdisable, cupsenable - stop/start printers and classes, cupsenable starts the named printers or classes while cupsdisable stops the named printers or classes.
cupsfilter	cupsfilter is a front-end to the CUPS filter subsystem which allows you to convert a file to a specific format, just as if you had printed the file through CUPS. By default, cupsfilter generates a PDF file. The converted file is sent to the standard output.
cupsreject	The cupsaccept command instructs the printing system to accept print jobs to the specified destinations. The cupsreject command instructs the printing system to reject print jobs to the specified destinations. The -r option sets the reason for rejecting print jobs. If not specified, the reason defaults to "Reason Unknown".
debugfs	debugfs - ext2/ext3/ext4 file system debugger
dmidecode	dmidecode is a tool for dumping a computer's DMI (some say SMBIOS) table contents in a human-readable format. This table contains a description of the system's hardware components, as well as other useful pieces of information such as serial numbers and BIOS revision. Thanks to this table, you can retrieve this information without having to probe for the actual hardware. While this is a good point in terms of report speed and safeness, this also makes the presented information possibly unreliable.
dumpe2fs	dumpe2fs - dump ext2/ext3/ext4 filesystem information
e2freefrag	e2freefrag is used to report free space fragmentation on ext2/3/4 file systems. filesys is the filesystem device name (e.g. /dev/hdc1, /dev/md0). The e2freefrag program will scan the block bitmap information to check how many free blocks are present as contiguous and aligned free space. The percentage of contiguous free blocks of size and of alignment chunk_kb is reported. It also displays the minimum/maximum/average free chunk size in the filesystem, along with a histogram of all free chunks. This information can be used to gauge the level of free space fragmentation in the filesystem.
e2fsck	e2fsck is used to check the ext2/ext3/ext4 family of file systems. For ext3 and ext4 filesystems that use a journal, if the system has been shut down uncleanly without any errors, normally, after replaying the committed transactions in the journal, the file system should be marked as clean. Hence, for filesystems that use journalling, e2fsck will normally replay the journal and exit, unless its superblock indicates that further checking is required.
e2image	The e2image program will save critical ext2, ext3, or ext4 filesystem metadata located on device to a file specified by image-file. The image file may be examined by dumpe2fs and debugfs, by using the -i option to those programs. This can assist an expert in recovering catastrophically corrupted filesystems. In the future, e2fsck will be enhanced to be able to use the image file to help recover a badly damaged filesystem.
e2label	e2label - Change the label on an ext2/ext3/ext4 filesystem
e2mmpstatus	e2mmpstatus - Check MMP status of an ext4 filesystem
e2undo	e2undo will replay the undo log undo_log for an ext2/ext3/ext4 filesystem found on device. This can be used to undo a failed operation by an e2fsprogs program.
escapesrc
eventlogadm	eventlogadm - push records into the Samba event log store
findfs	findfs will search the disks in the system looking for a filesystem which has a label matching label or a UUID equal to uuid. If the filesystem is found, the device name for the filesystem will be printed on stdout.
foomatic-addpjloptions	foomatic-addpjloptions formats the PJL information file (or STDIN) into a format usable by the Foomatic database.
foomatic-cleanupdrivers
foomatic-extract-text
foomatic-fix-xml
foomatic-getpjloptions	foomatic-getpjloptions Sends a set of PJL commands and reads back the PJL options and status from a printer over a network connection or device bidirectional interface such as parallel, USB, serial. printers to standard output. The output can be piped into foomatic-addpjloptions to add options to the database.
foomatic-kitload	foomatic-kitload installs a foomatic data kit into the local data library. It takes a -k dirname option, where dirname is the toplevel directory of a foomatic driver "kit". A "kit" is a selection of XML source files arranged exactly as in the source/section of the master database (ie, opt/driver/printer/ subdirs).
foomatic-nonumericalids
foomatic-preferred-driver	foomatic-preferred-driver
foomatic-printermap-to-gutenprint-xml
foomatic-replaceoldprinterids
fsck.ext2	e2fsck is used to check the ext2/ext3/ext4 family of file systems.
fsck.ext3	e2fsck is used to check the ext2/ext3/ext4 family of file systems.
fsck.ext4	e2fsck is used to check the ext2/ext3/ext4 family of file systems.
fsck_ext2fs	fsck_ext2fs maps the traditional FreeBSD fsck_ffs options to options with the same functionality for e2fsck, runs e2fsck and then maps its exit status to values that FreeBSD understands. e2fsck is a utility to check and repair ext2 and ext3 file systems.
genccode	genccode reads each of the supplied filename and writes out a C file containing a compilable definition of the data in the data file. The C file name is made by taking the base name of the data filename, replacing dots by underscores, and adding a .c file extension.
gencmn	gencmn takes a set of files and packages them as an ICU memory-mappable data file. The resulting data file can then be used directly by ICU.
gennorm2
gensprep	gensprep reads filtered RFC 3454 files and compiles their information into a binary form. The resulting file, <name>.icu, can then be read directly by ICU, or used by pkgdata(8) for incorporation into a larger archive or library.
gpart	The gpart program is a simplified interface to gmap, which performs graph partitioning instead of static mapping.
hald	hald is a daemon that maintains a database of the devices connected to the system system in real-time. The daemon connects to the D-Bus system message bus to provide an API that applications can use to discover, monitor and invoke operations on devices.
icupkg	icupkg reads the input ICU .dat package file, modify it according to the options, swap it to the desired platform properties (charset & endianness), and optionally write the resulting ICU .dat package to the output file. Items are removed, then added, then extracted and listed.
lightdm	lightdm - a display manager
logsave	The logsave program will execute cmd_prog with the specified argument(s), and save a copy of its output to logfile.
lpadmin	lpadmin configures printer and class queues provided by CUPS. It can also be used to set the server default printer or class.
lpc	The lpc utility is used by the system administrator to control the operation of the line printer system.
lpinfo	lpinfo lists the available devices or drivers known to the CUPS server. The first form (-m) lists the available drivers, while the second form (-v) lists the available devices.
lpmove	lpmove - move a job or all jobs to a new destination
mate-display-properties-install-systemwide	This executable is part of the package 'mate-control-center': The MATE Control Center. This command line tool installs a RANDR profile for multi-monitor setups into a systemwide location. The resulting profile will get used when the RANDR plug-in gets run in mate-settings-daemon.
mate-power-backlight-helper
mke2fs	mke2fs is used to create an ext2, ext3, or ext4 filesystem, usually in a disk partition (or file) named by device.
mkfs.ext2	mke2fs is used to create an ext2, ext3, or ext4 filesystem, usually in a disk partition (or file) named by device.
mkfs.ext3	mke2fs is used to create an ext2, ext3, or ext4 filesystem, usually in a disk partition (or file) named by device.
mkfs.ext4	mke2fs is used to create an ext2, ext3, or ext4 filesystem, usually in a disk partition (or file) named by device.
mklost+found
mkntfs	mkntfs is used to create an NTFS file system on a device (usually a disk partition) or file. device is the special file corresponding to the device (e.g /dev/hdXX). number-of-sectors is the number of sectors on the device. If omitted, mkntfs automagically figures the file system size.
nmbd	nmbd - NetBIOS name server to provide NetBIOS over IP naming services to clients
ntfsclone	ntfsclone will efficiently clone (copy, save, backup, restore) or rescue an NTFS filesystem to a sparse file, image, device (partition) or standard output. It works at disk sector level and copies only the used data.
ntfscp	ntfscp will copy file to an NTFS volume.
ntfslabel	ntfslabel will display or change the file system label on the ntfs file system located on device. It can also change the serial number of the device.
ntfsrecover	ntfsrecover applies to the metadata the updates which were requested on Windows but could not be completed because they were interrupted by some event such as a power failure, a hardware crash, a software crash or the device being unplugged.
ntfsresize	The ntfsresize program safely resizes Windows XP, Windows Server 2003, Windows 2000, Windows NT4 and Longhorn NTFS filesystems without data loss. All NTFS versions are supported, used by 32-bit and 64-bit Windows.
ntfsundelete	ntfsundelete - recover a deleted file from an NTFS volume.
ownership	ownership retrieves and prints the "ownership tag" that can be set on Compaq computers. Contrary to all other programs of the dmidecode package, ownership doesn't print any version information, nor labels, but only the raw ownership tag. This should help its integration in scripts.
paperconfig	paperconfig - configure the system default paper size
pc-sysinstall	The pc-sysinstall utility is a hybrid backend for installing FreeBSD. When run in install mode it takes a configuration file and performs an installation according to the parameters specified in the configuration file. When called with one of the system query commands it provides in formation about the system to aid a front end in building an appropriate configuration file.
pkg	pkg provides an interface for manipulating packages: registering, adding, removing and upgrading packages. pkg-static is a statically linked variant of pkg typically only used for the initial installation of pkg.
pkg-static	pkg provides an interface for manipulating packages: registering, adding, removing and upgrading packages. pkg-static is a statically linked variant of pkg typically only used for the initial installation of pkg.
pluginviewer	pluginviewer can be used by a server administrator to troubleshoot SASL installations. The utility can list loadable (properly configured) client and server side plugins, as well as auxprop plugins.
reject	cupsaccept/cupsreject - accept/reject jobs sent to a destination
resize2fs	resize2fs - ext2/ext3/ext4 file system resizer
rrsync
samba	samba - Server to provide AD and SMB/CIFS services to clients
samba_dnsupdate
samba_kcc
samba_spnupdate
samba_upgradedns
samba-gpupdate
saned	saned is the SANE (Scanner Access Now Easy) daemon that allows remote clients to access image acquisition devices available on the local host.
sasldblistusers2	sasldblistusers2 is used to list the users in the SASL password database (usually /etc/sasldb2). This will NOT list all the users in /etc/passwd, shadow, PAM, etc. only those created by SASL (via saslpasswd2).
saslpasswd2	saslpasswd2 is used by a server administrator to set a user's sasl password for server programs and SASL mechanisms which use the standard libsasl database of user secrets.
slick-greeter
smbd	smbd is the server daemon that provides filesharing and printing services to Windows clients. The server provides filespace and printer services to clients using the SMB (or CIFS) protocol.
snmpd	snmpd is an SNMP agent which binds to a port and awaits requests from SNMP management software. Upon receiving a request, it processes the request(s), collects the requested information and/or performs the requested operation(s) and returns the information to the sender.
snmptrapd	snmptrapd is an SNMP application that receives and logs SNMP TRAP and INFORM messages.
start-stop-daemon	start-stop-daemon is used to control the creation and termination of system-level processes. Using one of the matching options, start-stop-daemon can be configured to find existing instances of a running process.
tcsd	tcsd - daemon that manages Trusted Computing resources; Trousers is an open-source TCG Software Stack (TSS), released under the BSD License. Trousers aims to be compliant with the current (1.1b) and upcoming (1.2) TSS specifications available from the Trusted Computing Group website: http://www.trustedcomputinggroup.org.
tcsd_emu
tune2fs	tune2fs - adjust tunable filesystem parameters on ext2/ext3/ext4 filesystems
uuidd	The uuidd daemon is used by the UUID library to generate universally unique identifiers (UUIDs), especially time-based UUID's in a secure and guaranteed-unique fashion, even in the face of large numbers of threads trying to grab UUID's running on different CPU's.
visudo	visudo edits the sudoers file in a safe fashion, analogous to vipw(8). visudo locks the sudoers file against multiple simultaneous edits, provides basic sanity checks, and checks for parse errors. If the sudoers file is currently being edited you will receive a message to try again later.
vpddecode	vpddecode prints the "vital product data" information that can be found in almost all IBM and Lenovo computers.
webcamd	webcamd is a daemon that enables the use of hundreds of different USB webcam, USB DVB, USB radio, USB input, USB tablet and more devices under the FreeBSD operating system.
winbindd	winbindd - Name Service Switch daemon for resolving names from NT servers
xfce4-kiosk-query

Difference between revisions of "/usr/local/sbin/"

Latest revision as of 05:47, 13 April 2020

Introduction[edit]

Content[edit]

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

User Docs Hub

Contributor Docs Hub

Community Help

Tools

@@ Line 7: / Line 7: @@
 ==Content==
+Content of <code>/usr/local/sbin/</code>
 {|class="wikitable" style="width:96.5%;background:#FFFFFF; border:2px solid #008000;text-align:left;padding: 10px"
@@ Line 13: / Line 14: @@
 ! scope="col" style="width: 350px;"|'''Description'''
 |-
-|/usr/local/sbin/accept||
+|accept||The cupsaccept command instructs the printing system to accept print jobs to the specified destinations.
 |-
-|/usr/local/sbin/addgnupghome||
+|addgnupghome||[https://www.freebsd.org/cgi/man.cgi?query=addgnupghome&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html addgnupghome] - Create .gnupg home directories; If  GnuPG  is  installed	on a system with existing user accounts, it is    sometimes required to populate the GnuPG	home directory	with  existing       files.	Especially  a  `trustlist.txt'	and a keybox with some initial       certificates are	often desired.	This scripts help to do	this by	 copying  all	 files	from `/etc/skel/.gnupg'	to the home directories	of the      accounts	given on the command line.  It takes care not to overwrite existing GnuPG home directories.
 |-
-|/usr/local/sbin/applygnupgdefaults||
+|applygnupgdefaults||[https://www.freebsd.org/cgi/man.cgi?query=applygnupgdefaults&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html applygnupgdefaults] - Run	gpgconf	--apply-defaults for all users.
 |-
-|/usr/local/sbin/avahi-daemon||
+|avahi-daemon||The  [https://www.freebsd.org/cgi/man.cgi?query=avahi-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html Avahi]  mDNS/DNS-SD daemon implements Apple's Zeroconf architecture        (also known as "Rendezvous" or "Bonjour"). The daemon  registers	 local       IP addresses and	static services	using mDNS/DNS-SD and provides two IPC       APIs for	local programs to make use of the mDNS record cache the	avahi-daemon  maintains. First	there is the so	called "simple protocol" which       is used exclusively by avahi-dnsconfd (a	daemon which  configures  unicast  DNS servers using server info published via mDNS) and nss-mdns (a      libc NSS	plugin,	providing name resolution via mDNS). Finally there  is       the  D-Bus interface which provides a rich object oriented interface to       D-Bus enabled applications.
 |-
-|/usr/local/sbin/avahi-dnsconfd||
+|avahi-dnsconfd||[https://www.freebsd.org/cgi/man.cgi?query=avahi-dnsconfd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html avahi-dnsconfd] connects to a running avahi-daemon and runs  the	script ''/home/lennart/tmp/avahi/usr/local/etc/avahi/dnsconfd.action''   for  each unicast DNS server that is announced on the local LAN. This  is	useful    for configuring unicast DNS servers in a	DHCP-like fashion with mDNS.
 |-
-|/usr/local/sbin/badblocks||
+|badblocks||[https://www.freebsd.org/cgi/man.cgi?query=badblocks&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html badblocks] is used to search for bad blocks on a device (usually a  disk      partition).   device  is	 the  special file corresponding to the	device    (e.g /dev/hdc1).
 |-
-|/usr/local/sbin/biosdecode||
+|biosdecode||[https://www.freebsd.org/cgi/man.cgi?query=biosdecode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html biosdecode]  parses  the	BIOS  memory  and prints information about all   structures (or entry points) it knows of.
 |-
-|/usr/local/sbin/blkid||
+|blkid||[https://www.freebsd.org/cgi/man.cgi?query=blkid&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html blkid] - command-line utility to locate/print block device attributes
 |-
-|/usr/local/sbin/bonobo-activation-sysconf||
+|bonobo-activation-sysconf||This is a [http://www.linuxfromscratch.org/~thomasp/blfs-book-xsl/gnome/libbonobo.html component] and compound document system for GNOME-2
 |-
-|/usr/local/sbin/ck-log-system-restart||
+|ck-log-system-restart||
 |-
-|/usr/local/sbin/ck-log-system-start||
+|ck-log-system-start||
 |-
-|/usr/local/sbin/ck-log-system-stop||
+|ck-log-system-stop||
 |-
-|/usr/local/sbin/console-kit-daemon||
+|console-kit-daemon||[https://unix.stackexchange.com/questions/68597/console-kit-daemon-hogging-cpu-and-ram ConsoleKit] manages console logins in graphical mode
 |-
-|/usr/local/sbin/cracklib-check||
+|cracklib-check||[https://www.freebsd.org/cgi/man.cgi?query=cracklib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CrackLib] is  a	library	containing a C function	which may be used in a        passwd(1)-like program.
+The idea	is simple: try to prevent users	from choosing  passwords  that     could be	guessed	by Crack by filtering them out,	at source.
 |-
-|/usr/local/sbin/cracklib-format||
+|cracklib-format||[https://www.freebsd.org/cgi/man.cgi?query=cracklib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CrackLib] is  a	library	containing a C function	which may be used in a        passwd(1)-like program.  The idea	is simple: try to prevent users	from choosing  passwords  that    could be	guessed	by Crack by filtering them out,	at source.
 |-
-|/usr/local/sbin/cracklib-packer||
+|cracklib-packer||[https://www.freebsd.org/cgi/man.cgi?query=cracklib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CrackLib] is  a	library	containing a C function	which may be used in a        passwd(1)-like program.  The idea	is simple: try to prevent users	from choosing  passwords  that    could be	guessed	by Crack by filtering them out,	at source.
 |-
-|/usr/local/sbin/cracklib-unpacker||
+|cracklib-unpacker||[https://www.freebsd.org/cgi/man.cgi?query=cracklib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CrackLib] is  a	library	containing a C function	which may be used in a        passwd(1)-like program.  The idea	is simple: try to prevent users	from choosing  passwords  that    could be	guessed	by Crack by filtering them out,	at source.
 |-
-|/usr/local/sbin/create-cracklib-dict||
+|create-cracklib-dict||[https://www.freebsd.org/cgi/man.cgi?query=cracklib&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html CrackLib] is  a	library	containing a C function	which may be used in a        passwd(1)-like program.  The idea	is simple: try to prevent users	from choosing  passwords  that    could be	guessed	by Crack by filtering them out,	at source.
 |-
-|/usr/local/sbin/cups-browsed||
+|cups-browsed||[https://www.freebsd.org/cgi/man.cgi?query=cups-browsed&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-browsed]  - A daemon	for browsing the Bonjour broadcasts of shared, remote CUPS printers
 |-
-|/usr/local/sbin/cups-genppd.5.3||
+|cups-genppd.5.3||[https://www.freebsd.org/cgi/man.cgi?query=cups-genppd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-genppd] - generate Gutenprint PPD files for use with	CUPS
 |-
-|/usr/local/sbin/cups-genppdupdate||
+|cups-genppdupdate||[https://www.freebsd.org/cgi/man.cgi?query=cups-genppdupdate&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cups-genppdupdate] regenerates the Gutenprint PPD	files in use by	 CUPS,     using  the  PPD	files  under ''/usr/local/share/cups/model/gutenprint'' as      templates.
 |-
-|/usr/local/sbin/cupsaccept||
+|cupsaccept||The [https://www.freebsd.org/cgi/man.cgi?query=accept&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsaccept] command instructs	the printing system  to	 accept	 print      jobs to the specified destinations.
 |-
-|/usr/local/sbin/cupsaddsmb||
+|cupsaddsmb||The [https://www.freebsd.org/cgi/man.cgi?query=cupsaddsmb&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsaddsmb] program exports printers	to the SAMBA software (version    2.2.0 or	higher)	for use	with Windows clients.  Depending on the	 SAMBA       configuration,  you may need to provide a password to export the	printers.  This program requires the Windows printer driver files.
 |-
-|/usr/local/sbin/cupsctl||
+|cupsctl||[https://www.freebsd.org/cgi/man.cgi?query=cupsctl&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsctl]	updates	 or  queries the cupsd.conf file for a server. When no      changes are requested, the current configuration	values are written  to      the standard output in the format "name=value", one per line.
 |-
-|/usr/local/sbin/cupsd||
+|cupsd||[https://www.freebsd.org/cgi/man.cgi?query=cupsd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsd] is	the scheduler for CUPS.	It implements a	printing system	 based  upon  the Internet Printing Protocol, version 2.1, and supports most of      the requirements	for IPP	Everywhere. If no options are specified	on the     command-line    then    the   default   configuration   file   /usr/local/etc/cups/cupsd.conf will be used.
 |-
-|/usr/local/sbin/cupsdisable||
+|cupsdisable||[https://www.freebsd.org/cgi/man.cgi?query=cupsdisable&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsdisable, cupsenable] - stop/start printers and classes, cupsenable starts the named printers or classes while cupsdisable stops   the named printers or classes.
 |-
-|/usr/local/sbin/cupsenable||
+|cupsenable||[https://www.freebsd.org/cgi/man.cgi?query=cupsdisable&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsdisable, cupsenable] - stop/start printers and classes, cupsenable starts the named printers or classes while cupsdisable stops   the named printers or classes.
 |-
-|/usr/local/sbin/cupsfilter||
+|cupsfilter||[https://www.freebsd.org/cgi/man.cgi?query=cupsfilter&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsfilter] is a front-end to the	CUPS filter subsystem which allows you to  convert a file to a specific	format,	just as	if you had printed the file through CUPS. By default, cupsfilter generates  a  PDF  file.  The     converted file is sent to the standard output.
 |-
-|/usr/local/sbin/cupsreject||
+|cupsreject||The [https://www.freebsd.org/cgi/man.cgi?query=cupsreject&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsaccept] command instructs	the printing system  to	 accept	 print jobs to the specified destinations.
+The  cupsreject	command	 instructs the printing	system to reject print jobs to the specified destinations.  The	-r option sets the reason  for       rejecting  print	jobs. If not specified,	the reason defaults to "Reason       Unknown".
 |-
-|/usr/local/sbin/debugfs||
+|debugfs||[https://www.freebsd.org/cgi/man.cgi?query=debugfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html debugfs] - ext2/ext3/ext4	file system debugger
 |-
-|/usr/local/sbin/dmidecode||
+|dmidecode||[https://www.freebsd.org/cgi/man.cgi?query=dmidecode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dmidecode]  is a tool for	dumping	a computer's DMI (some say SMBIOS) table contents in a human-readable	format.	This table contains a description  of	 the  system's	hardware  components,  as well as other	useful       pieces of information such as serial numbers and	BIOS revision.	Thanks     to  this	 table,	 you  can  retrieve this information without having to       probe for the actual hardware.  While this is a good point in terms  of       report  speed  and  safeness, this also makes the presented information       possibly	unreliable.
 |-
-|/usr/local/sbin/dumpe2fs||
+|dumpe2fs||[https://www.freebsd.org/cgi/man.cgi?query=dumpe2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html dumpe2fs] - dump ext2/ext3/ext4 filesystem information
 |-
-|/usr/local/sbin/e2freefrag||
+|e2freefrag||[https://www.freebsd.org/cgi/man.cgi?query=e2freefrag&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2freefrag]  is used to report free space	fragmentation on ext2/3/4 file     systems.	 filesys is  the  filesystem  device  name  (e.g.   /dev/hdc1,   /dev/md0).   The	e2freefrag program will	scan the block bitmap information to check how many  free  blocks  are  present  as  contiguous  and      aligned	free  space.  The percentage of	contiguous free	blocks of size       and of alignment	chunk_kb is reported.	It  also  displays  the	 minimum/maximum/average  free  chunk	 size  in the filesystem, along	with a      histogram of all	free chunks.  This information can be  used  to	 gauge       the level of free space fragmentation in	the filesystem.
 |-
-|/usr/local/sbin/e2fsck||
+|e2fsck||[https://www.freebsd.org/cgi/man.cgi?query=e2fsck&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2fsck] is used to check the ext2/ext3/ext4 family of file systems.  For    ext3 and	ext4 filesystems that use a journal, if	the  system  has  been     shut  down  uncleanly without any errors, normally, after replaying the       committed transactions  in the  journal,	 the  file  system  should  be       marked  as clean.   Hence, for filesystems that use journalling,	e2fsck       will normally replay the	journal	and exit, unless its superblock	 indicates that further checking is required.
 |-
-|/usr/local/sbin/e2image||
+|e2image||The [https://www.freebsd.org/cgi/man.cgi?query=e2image&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2image] program will	save critical ext2, ext3, or  ext4  filesystem      metadata	 located on device to a	file specified by image-file.  The image file	may be examined	by dumpe2fs and	debugfs, by using the  -i  option  to	those programs.	 This can assist an expert in recovering catastrophically corrupted filesystems.  In the future, e2fsck will be  enhanced to be able to use	the image file to help recover a badly damaged    filesystem.
 |-
-|/usr/local/sbin/e2label||
+|e2label||[https://www.freebsd.org/cgi/man.cgi?query=e2label&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2label] - Change	the label on an	ext2/ext3/ext4 filesystem
 |-
-|/usr/local/sbin/e2mmpstatus||
+|e2mmpstatus||[http://man7.org/linux/man-pages/man8/e2mmpstatus.8.html e2mmpstatus] - Check MMP status of an ext4 filesystem
 |-
-|/usr/local/sbin/e2undo||
+|e2undo||[https://www.freebsd.org/cgi/man.cgi?query=e2undo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2undo] will replay the undo log undo_log	for an ext2/ext3/ext4 filesystem found on device.  This can be used to undo a	failed operation by an   e2fsprogs program.
 |-
-|/usr/local/sbin/escapesrc||
+|escapesrc||
 |-
-|/usr/local/sbin/eventlogadm||
+|eventlogadm||[https://www.freebsd.org/cgi/man.cgi?query=eventlogadm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html eventlogadm] - push records into the Samba event log store
 |-
-|/usr/local/sbin/findfs||
+|findfs||[https://www.freebsd.org/cgi/man.cgi?query=findfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html findfs]  will  search  the  disks	in the system looking for a filesystem        which has a label matching label	or a  UUID  equal  to  uuid.   If  the    filesystem is found, the	device name for	the filesystem will be printed     on stdout.
 |-
-|/usr/local/sbin/foomatic-addpjloptions||
+|foomatic-addpjloptions||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-addpjloptions&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html  foomatic-addpjloptions] formats the PJL information file (or STDIN) into  a format	usable by the Foomatic database.
 |-
-|/usr/local/sbin/foomatic-cleanupdrivers||
+|foomatic-cleanupdrivers||
 |-
-|/usr/local/sbin/foomatic-extract-text||
+|foomatic-extract-text||
 |-
-|/usr/local/sbin/foomatic-fix-xml||
+|foomatic-fix-xml||
 |-
-|/usr/local/sbin/foomatic-getpjloptions||
+|foomatic-getpjloptions||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-getpjloptions&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-getpjloptions]  Sends  a	set of PJL commands and	reads back the     PJL options and status from a printer over a network connection or  device  bidirectional  interface such as parallel,	USB, serial.  printers   to standard output. The output can be piped into	foomatic-addpjloptions  to add options to the database.
 |-
-|/usr/local/sbin/foomatic-kitload||
+|foomatic-kitload||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-kitload&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-kitload	] installs  a foomatic data kit into the	local data library.  It takes	a -k dirname option, where dirname is the toplevel directory	of  a  foomatic	 driver	 "kit".	 A "kit" is a selection	of XML       source files arranged exactly as	in the source/section  of  the	master       database	(ie, opt/driver/printer/ subdirs).
 |-
-|/usr/local/sbin/foomatic-nonumericalids||
+|foomatic-nonumericalids||
 |-
-|/usr/local/sbin/foomatic-preferred-driver||
+|foomatic-preferred-driver||[https://www.freebsd.org/cgi/man.cgi?query=foomatic-preferred-driver&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html foomatic-preferred-driver]
 |-
-|/usr/local/sbin/foomatic-printermap-to-gutenprint-xml||
+|foomatic-printermap-to-gutenprint-xml||
 |-
-|/usr/local/sbin/foomatic-replaceoldprinterids||
+|foomatic-replaceoldprinterids||
 |-
-|/usr/local/sbin/fsck.ext2||
+|fsck.ext2||[https://www.freebsd.org/cgi/man.cgi?query=fsck.ext2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2fsck] is used to check the ext2/ext3/ext4 family of file systems.
 |-
-|/usr/local/sbin/fsck.ext3||
+|fsck.ext3||[https://www.freebsd.org/cgi/man.cgi?query=fsck.ext2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2fsck] is used to check the ext2/ext3/ext4 family of file systems.
 |-
-|/usr/local/sbin/fsck.ext4||
+|fsck.ext4||[https://www.freebsd.org/cgi/man.cgi?query=fsck.ext2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html e2fsck] is used to check the ext2/ext3/ext4 family of file systems.
 |-
-|/usr/local/sbin/fsck_ext2fs||
+|fsck_ext2fs||[https://www.freebsd.org/cgi/man.cgi?query=fsck_ext2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html fsck_ext2fs]  maps  the  traditional FreeBSD fsck_ffs options to options   with the	same functionality for e2fsck, runs e2fsck and then  maps  its      exit status to values that FreeBSD understands.	e2fsck is a utility to      check and repair	ext2 and ext3 file systems.
 |-
-|/usr/local/sbin/genccode||
+|genccode||[https://www.freebsd.org/cgi/man.cgi?query=genccode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html genccode] reads each of the supplied filename and	writes out  a  C  file        containing a compilable definition of the data in the data file.	 The C       file name is made by taking the base name of the	data filename, replacing dots	by underscores,	and adding a .c	file extension.
 |-
-|/usr/local/sbin/gencmn||
+|gencmn||[https://www.freebsd.org/cgi/man.cgi?query=gencmn&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gencmn] takes a set of files and packages	them as	an ICU memory-mappable  data file. The resulting	data file can then be used directly by ICU.
 |-
-|/usr/local/sbin/gennorm2||
+|gennorm2||
 |-
-|/usr/local/sbin/gensprep||
+|gensprep||[https://www.freebsd.org/cgi/man.cgi?query=gensprep&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gensprep] reads	filtered RFC 3454 files	and compiles their information     into a binary form.  The	resulting file,	<name>.icu, can	then  be  read     directly	 by ICU, or used by pkgdata(8) for incorporation into a	larger      archive or library.
 |-
-|/usr/local/sbin/gpart||
+|gpart||The [https://www.freebsd.org/cgi/man.cgi?query=gpart&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html gpart] program is a simplified interface  to	gmap,  which  performs   graph partitioning instead of static mapping.
 |-
-|/usr/local/sbin/hald||
+|hald||[https://www.freebsd.org/cgi/man.cgi?query=hald&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html hald]  is	a daemon that maintains	a database of the devices connected to     the system system in real-time. The daemon connects to the D-Bus	system     message	bus  to	 provide an API	that applications can use to discover,     monitor and invoke operations on	devices.
 |-
-|/usr/local/sbin/icupkg||
+|icupkg||[https://www.freebsd.org/cgi/man.cgi?query=icupkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html icupkg]  reads  the  input ICU .dat package file,	modify it according to the options, swap it to the desired platform properties (charset	&  endianness),  and	optionally write the resulting ICU .dat	package	to the       output file.  Items are removed,	then added, then extracted and listed.
 |-
-|/usr/local/sbin/lightdm||
+|lightdm||[https://www.freebsd.org/cgi/man.cgi?query=lightdm&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lightdm] - a display manager
 |-
-|/usr/local/sbin/logsave||
+|logsave||The  [https://www.freebsd.org/cgi/man.cgi?query=logsave&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html logsave]  program  will  execute  cmd_prog with the specified argument(s),	and save a copy	of its output to logfile.
 |-
-|/usr/local/sbin/lpadmin||
+|lpadmin||[https://www.freebsd.org/cgi/man.cgi?query=lpadmin&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpadmin] configures printer and class queues provided by CUPS.   It  can   also be used to set the server default printer or class.
 |-
-|/usr/local/sbin/lpc||
+|lpc||The [https://www.freebsd.org/cgi/man.cgi?query=lpc&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpc] utility is	used by	the system administrator to control the	operation of the line printer system.
 |-
-|/usr/local/sbin/lpinfo||
+|lpinfo||[https://www.freebsd.org/cgi/man.cgi?query=lpinfo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpinfo] lists the	available devices or drivers known to the CUPS server.        The first form (-m) lists the available drivers,	while the second  form       (-v) lists the available	devices.
 |-
-|/usr/local/sbin/lpmove||
+|lpmove||[https://www.freebsd.org/cgi/man.cgi?query=lpmove&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html lpmove] -	move a job or all jobs to a new	destination
 |-
-|/usr/local/sbin/mate-display-properties-install-systemwide||
+|mate-display-properties-install-systemwide||[https://www.freebsd.org/cgi/man.cgi?query=mate-display-properties-install-systemwide&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html This executable] is part of the package 'mate-control-center': The  MATE  Control Center.
+This  command line tool installs	a RANDR	profile	for multi-monitor setups into	a systemwide location.	The resulting profile  will  get  used       when the	RANDR plug-in gets run in mate-settings-daemon.
 |-
-|/usr/local/sbin/mate-power-backlight-helper||
+|mate-power-backlight-helper||
 |-
-|/usr/local/sbin/mke2fs||
+|mke2fs||[https://www.freebsd.org/cgi/man.cgi?query=mke2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mke2fs]  is used to create an ext2, ext3,	or ext4	filesystem, usually in a disk partition	(or file) named	by device.
 |-
-|/usr/local/sbin/mkfs.ext2||
+|mkfs.ext2||[https://www.freebsd.org/cgi/man.cgi?query=mke2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mke2fs]  is used to create an ext2, ext3,	or ext4	filesystem, usually in a disk partition	(or file) named	by device.
 |-
-|/usr/local/sbin/mkfs.ext3||
+|mkfs.ext3||[https://www.freebsd.org/cgi/man.cgi?query=mke2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mke2fs]  is used to create an ext2, ext3,	or ext4	filesystem, usually in a disk partition	(or file) named	by device.
 |-
-|/usr/local/sbin/mkfs.ext4||
+|mkfs.ext4||[https://www.freebsd.org/cgi/man.cgi?query=mke2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mke2fs]  is used to create an ext2, ext3,	or ext4	filesystem, usually in a disk partition	(or file) named	by device.
 |-
-|/usr/local/sbin/mklost+found||
+|mklost+found||
 |-
-|/usr/local/sbin/mkntfs||
+|mkntfs||[https://www.freebsd.org/cgi/man.cgi?query=mkntfs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html mkntfs]  is  used	 to  create an NTFS file system	on a device (usually a   disk partition) or file.	 device	is the special file  corresponding  to       the device (e.g /dev/hdXX).  number-of-sectors is the number of sectors       on the device. If omitted, mkntfs automagically figures the file	system       size.
 |-
-|/usr/local/sbin/nmbd||
+|nmbd||[https://www.freebsd.org/cgi/man.cgi?query=nmbd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html nmbd] - NetBIOS name server to provide NetBIOS over IP naming services     to clients
 |-
-|/usr/local/sbin/ntfsclone||
+|ntfsclone||[https://www.freebsd.org/cgi/man.cgi?query=ntfsclone&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsclone]  will efficiently clone (copy,	save, backup, restore) or rescue an NTFS filesystem to a sparse file,	image, device  (partition)  or   standard	 output.   It  works  at disk sector level and copies only the       used data.
 |-
-|/usr/local/sbin/ntfscp||
+|ntfscp||[https://www.freebsd.org/cgi/man.cgi?query=ntfscp&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfscp] will copy	file to	an NTFS	volume.
 |-
-|/usr/local/sbin/ntfslabel||
+|ntfslabel||[https://www.freebsd.org/cgi/man.cgi?query=ntfslabel&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfslabel] will display or change	the file system	label on the ntfs file   system located on device.  It can also change the serial	number of  the     device.
 |-
-|/usr/local/sbin/ntfsrecover||
+|ntfsrecover||[https://www.freebsd.org/cgi/man.cgi?query=ntfsrecover&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsrecover] applies to the metadata the updates which were requested on   Windows but could not be	completed because  they	 were  interrupted  by   some  event such	as a power failure, a hardware crash, a	software crash       or the device being unplugged.
 |-
-|/usr/local/sbin/ntfsresize||
+|ntfsresize||The  [https://www.freebsd.org/cgi/man.cgi?query=ntfsresize&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsresize] program safely resizes Windows XP, Windows Server 2003,   Windows 2000, Windows NT4 and Longhorn NTFS  filesystems	 without  data    loss.  All  NTFS	versions are supported,	used by	32-bit and 64-bit Windows.
 |-
-|/usr/local/sbin/ntfsundelete||
+|ntfsundelete||[https://www.freebsd.org/cgi/man.cgi?query=ntfsundelete&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ntfsundelete] - recover a	deleted	file from an NTFS volume.
 |-
-|/usr/local/sbin/ownership||
+|ownership||[https://www.freebsd.org/cgi/man.cgi?query=ownership&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html ownership]  retrieves  and prints	the "ownership tag" that can be	set on Compaq computers. Contrary to all other programs	of the dmidecode package,  ownership	doesn't	print any version information, nor labels, but        only the	raw  ownership	tag.  This  should  help  its  integration  in       scripts.
 |-
-|/usr/local/sbin/paperconfig||
+|paperconfig||[https://www.freebsd.org/cgi/man.cgi?query=paperconfig&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html paperconfig] - configure the system default paper	size
 |-
-|/usr/local/sbin/pc-sysinstall||
+|'''[[Pc-sysinstall|pc-sysinstall]]'''||The [https://www.freebsd.org/cgi/man.cgi?query=pc-sysinstall&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pc-sysinstall] utility is a hybrid backend for installing FreeBSD.      When run in install mode it takes a configuration file and	performs an     installation according to the parameters specified	in the configuration     file.  When called	with one of the	system query commands it provides in   formation about the system	to aid a front end in building an appropriate
+configuration file.
 |-
-|/usr/local/sbin/pkg||
+|'''[[Pkg|pkg]]'''||[https://www.freebsd.org/cgi/man.cgi?query=pkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pkg] provides an interface for manipulating	packages: registering, adding,     removing and upgrading packages.  pkg-static is a statically linked variant of pkg	typically only used for	the initial installation of pkg.
 |-
-|/usr/local/sbin/pkg-static||
+|pkg-static||[https://www.freebsd.org/cgi/man.cgi?query=pkg&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pkg] provides an interface for manipulating	packages: registering, adding,     removing and upgrading packages.  pkg-static is a statically linked variant of pkg	typically only used for	the initial installation of pkg.
 |-
-|/usr/local/sbin/pluginviewer||
+|pluginviewer||[https://www.freebsd.org/cgi/man.cgi?query=pluginviewer&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html pluginviewer] can	be used	by a server administrator to troubleshoot SASL       installations.	The  utility  can  list	loadable (properly configured)       client and server side plugins, as well as auxprop plugins.
 |-
-|/usr/local/sbin/reject||
+|reject||[https://www.freebsd.org/cgi/man.cgi?query=reject&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html cupsaccept/cupsreject] - accept/reject jobs sent to a destination
 |-
-|/usr/local/sbin/resize2fs||
+|resize2fs||[https://www.freebsd.org/cgi/man.cgi?query=resize2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html resize2fs] - ext2/ext3/ext4 file system resizer
 |-
-|/usr/local/sbin/rrsync||
+|rrsync||
 |-
-|/usr/local/sbin/samba||
+|samba||[https://www.freebsd.org/cgi/man.cgi?query=samba&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html samba] - Server to provide AD and	SMB/CIFS services to clients
 |-
-|/usr/local/sbin/samba_dnsupdate||
+|samba_dnsupdate||
 |-
-|/usr/local/sbin/samba_kcc||
+|samba_kcc||
 |-
-|/usr/local/sbin/samba_spnupdate||
+|samba_spnupdate||
 |-
-|/usr/local/sbin/samba_upgradedns||
+|samba_upgradedns||
 |-
-|/usr/local/sbin/samba-gpupdate||
+|samba-gpupdate||
 |-
-|/usr/local/sbin/saned||
+|saned||[https://www.freebsd.org/cgi/man.cgi?query=saned&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html saned]  is  the SANE (Scanner Access Now Easy) daemon that allows	remote  clients to access image acquisition  devices  available	on  the	 local    host.
 |-
-|/usr/local/sbin/sasldblistusers2||
+|sasldblistusers2||[https://www.freebsd.org/cgi/man.cgi?query=sasldblistusers2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html sasldblistusers2] is  used to list the users in the SASL	password database (usually /etc/sasldb2). This  will	NOT  list  all	the  users  in      /etc/passwd,  shadow,  PAM,  etc.  only	those  created	by  SASL  (via    saslpasswd2).
 |-
-|/usr/local/sbin/saslpasswd2||
+|saslpasswd2||[https://www.freebsd.org/cgi/man.cgi?query=saslpasswd2&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html saslpasswd2] is used by a	server administrator  to  set  a  user's  sasl    password	for server programs and	SASL mechanisms	which use the standard   libsasl database	of user	secrets.
 |-
-|/usr/local/sbin/slick-greeter||
+|slick-greeter||
 |-
-|/usr/local/sbin/smbd||
+|smbd||[https://www.freebsd.org/cgi/man.cgi?query=smbd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html smbd] is the server daemon that provides filesharing and printing  services	to Windows clients. The	server provides	filespace and printer    services	to clients using the SMB (or CIFS) protocol.
 |-
-|/usr/local/sbin/snmpd||
+|snmpd||[https://www.freebsd.org/cgi/man.cgi?query=snmpd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmpd]  is  an SNMP agent	which binds to a port and awaits requests from  SNMP management software.  Upon receiving a request, it	processes  the    request(s),  collects the requested information and/or performs the requested operation(s) and	returns	the information	to the sender.
 |-
-|/usr/local/sbin/snmptrapd||
+|snmptrapd||[https://www.freebsd.org/cgi/man.cgi?query=snmptrapd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html snmptrapd]  is  an SNMP application that receives	and logs SNMP TRAP and  INFORM messages.
 |-
-|/usr/local/sbin/start-stop-daemon||
+|start-stop-daemon||[https://www.freebsd.org/cgi/man.cgi?query=start-stop-daemon&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html start-stop-daemon]  is  used  to control the creation and	termination of system-level  processes.	  Using	  one	of   the   matching   options,      start-stop-daemon  can  be  configured  to find existing	instances of a      running process.
 |-
-|/usr/local/sbin/tcsd||
+|tcsd||[https://www.freebsd.org/cgi/man.cgi?query=tcsd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tcsd] - daemon that manages Trusted Computing resources; Trousers	is an open-source TCG Software Stack (TSS), released under the        BSD License. Trousers aims to be	compliant with the current (1.1b) and       upcoming	(1.2) TSS specifications available from	the Trusted Computing       Group website: http://www.trustedcomputinggroup.org.
 |-
-|/usr/local/sbin/tcsd_emu||
+|tcsd_emu||
 |-
-|/usr/local/sbin/tune2fs||
+|tune2fs||[https://www.freebsd.org/cgi/man.cgi?query=tune2fs&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html tune2fs]	-  adjust  tunable  filesystem	parameters  on	ext2/ext3/ext4        filesystems
 |-
-|/usr/local/sbin/uuidd||
+|uuidd||The  [https://www.freebsd.org/cgi/man.cgi?query=uuidd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html uuidd]  daemon  is used by the UUID library to generate universally   unique identifiers (UUIDs), especially time-based UUID's	 in  a	secure       and  guaranteed-unique  fashion,	 even  in the face of large numbers of      threads trying to grab UUID's running on	different CPU's.
 |-
-|/usr/local/sbin/visudo||
+|visudo||[https://www.freebsd.org/cgi/man.cgi?query=visudo&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html visudo] edits the sudoers file in a	safe fashion, analogous	to [https://www.freebsd.org/cgi/man.cgi?query=vipw&sektion=8&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports vipw(8)]. visudo locks the sudoers file against multiple simultaneous edits,	provides basic sanity	checks,	and checks for parse errors.  If the sudoers     file is currently being edited you	will receive a message to try again     later.
 |-
-|/usr/local/sbin/vpddecode||
+|vpddecode||[https://www.freebsd.org/cgi/man.cgi?query=vpddecode&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html vpddecode] prints	the "vital product data" information that can be found        in almost all IBM and Lenovo computers.
 |-
-|/usr/local/sbin/webcamd||
+|webcamd||[https://www.freebsd.org/cgi/man.cgi?query=webcamd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html webcamd] is	a daemon that enables the use of hundreds of different USB webcam, USB DVB, USB	radio, USB input, USB tablet and more devices under     the FreeBSD operating system.
 |-
-|/usr/local/sbin/winbindd||
+|winbindd||[https://www.freebsd.org/cgi/man.cgi?query=winbindd&apropos=0&sektion=0&manpath=FreeBSD+12.1-RELEASE+and+Ports&arch=default&format=html winbindd] - Name Service Switch daemon for resolving names from NT servers
 |-
-|/usr/local/sbin/xfce4-kiosk-query||
+|xfce4-kiosk-query||
 |}
 [[Category:Sysutils]]