Difference between revisions of "Init.d"

Revision as of 09:32, 6 October 2020

Welcome to Init.d.

OpenRC
Scripts
/etc/rc rc - shell	/etc/rc.devd The generic hook into OpenRC.	/sbin/rcorder Ordering rc-scripts
/etc/init.d Scripts to run OpenRC	/usr/local/etc/init.d Scripts to run OpenRC
/etc/rc.d Scripts automatically executed at boot and shutdown	/usr/local/etc/rc.d Special scripts
Configuration
/etc/devd.conf Configuration file for devd(8)	/etc/conf.d Initscript Configuration Files	/etc/rc.conf.d Smaller configuration files
/etc/defaults/rc.conf Specifies the default settings for all the available options.	/etc/rc.conf The global OpenRC configuration file	/etc/rc.conf.ghostbsd GhostBSD specific configurations
Tools/Helper
/usr/sbin/sysrc Safely edit system rc files	/bin/rc-status Shows which services are running	/sbin/rc-update Add or delete services
/sbin/rc-service Locate and run an OpenRC service
Back to the System

Introduction

Here we will find all scripts to run OpenRC on GhostBSD.

Directory: /etc/init.d/*

Content

Name	Description
/etc/init.d/abi
/etc/init.d/accounting	Rotate the accounting logs
/etc/init.d/adjkerntz	Sets the local clock to UTC or Local Time. Saves the current time in the BIOS.
/etc/init.d/amd	amd_map_program
/etc/init.d/apm	Advanced power management
/etc/init.d/apmd	Advanced power management daemon
/etc/init.d/archdep	hw.machine_arch
/etc/init.d/auditd	Audit daemon
/etc/init.d/auditdistd	Audit trail files distribution daemon
/etc/init.d/automount	NFS Automount Client; desktop_generator="/usr/local/bin/trueos-mount"
/etc/init.d/automountd	using start-stop-daemon
/etc/init.d/autounmountd
/etc/init.d/bgfsck	Run fsck in background
/etc/init.d/blacklistd	System blacklist daemon
/etc/init.d/bluetooth	Bluetooth setup script
/etc/init.d/bootmisc	Dummy service for boot services
/etc/init.d/bootparams	Boot parameter daemon
/etc/init.d/bridge	Network bridge setup
/etc/init.d/bsnmpd	Simple and extensible SNMP daemon
/etc/init.d/bthidd	OpenRC service file for the "hcsecd" daemon
/etc/init.d/ccd	Concatenated disks setup
/etc/init.d/cfumass	Configure the LUN for device mode USB mass storage
/etc/init.d/cleanvar	Purge /var directory
/etc/init.d/cleartmp	Purge /tmp directory; Make /tmp location variable for easier debugging.
/etc/init.d/cron	Daemon to execute scheduled commands
/etc/init.d/ctld	CAM Target Layer / iSCSI target daemon
/etc/init.d/ddb	DDB kernel debugger
/etc/init.d/devd	Device State Change Daemon
/etc/init.d/devfs	devfs_rulesets_from_file file, reads a set of devfs commands from file, and creates the specified rulesets with their rules. Returns non-zero if there was an error.
/etc/init.d/devmatch	Use devmatch(8) to load kernel modules
/etc/init.d/dhcpcd	command=/sbin/dhcpcd; command_args="-q"
/etc/init.d/dhcpcd.em0
/etc/init.d/dhcpcd.nfe0
/etc/init.d/dmesg	Save kernel boot messages to disk
/etc/init.d/dumpon	Configures a specific kernel dump device
/etc/init.d/earlykld	Loading early kernel modules:'for _kld in $early_kld_list ; do load_kld -e ${_kld}.ko $_kld
/etc/init.d/encswap
/etc/init.d/fsck	Check and repair filesystems according to /etc/fstab
/etc/init.d/ftp-proxy	Internet File Transfer Protocol proxy daemon
/etc/init.d/ftpd	Internet File Transfer Protocol daemon
/etc/init.d/functions.sh	Allow any sh script to work with einfo functions and friends; Code common to scripts that need to load a kernel module if it isn't in the kernel yet. Syntax: load_kld [-e regex] [-m module] file where -e or -m chooses the way to check if the module
/etc/init.d/gbde	GEOM Based Disk Encryption
/etc/init.d/gptboot	gpart shows disk to start boot, freebsd-ufs
/etc/init.d/growfs	This allows us to distribute a image and have it work on essentially any size drive. TODO: Figure out where this should really be ordered. I suspect it should go just after fsck but before mountcritlocal. Grow root partition to fill device
/etc/init.d/growzfs	This script will dynamically resize the ZFS boot pool at startup
/etc/init.d/gssd	Generic Security Services Daemon
/etc/init.d/hastd	Highly Available Storage daemon
/etc/init.d/hcsecd	Control link keys and PIN codes for Bluetooth devices
/etc/init.d/hostapd	Authenticator for IEEE 802.11 networks
/etc/init.d/hostid	First we check to see if there is a system UUID. If so then we use that and erase the hostid file, otherwise we generate a random UUID.
/etc/init.d/hostid_save	Save unique host ID to disk
/etc/init.d/hostname	Sets the hostname of the machine
/etc/init.d/inetd	Internet \"super-server\"
/etc/init.d/iovctl	command="/usr/sbin/iovctl"
/etc/init.d/ipfs	Saves and restores information for NAT and state tables
/etc/init.d/ipfw	Firewall, traffic shaper, packet scheduler, in-kernel NAT
/etc/init.d/ipfw_netflow	irewall, ipfw, netflow
/etc/init.d/ipropd_master	command="/usr/libexec/ipropd-master"
/etc/init.d/ipropd_slave	command="/usr/libexec/ipropd-slave"
/etc/init.d/ipsec	Internet Protocol Security protocol
/etc/init.d/iscsictl	command="/usr/bin/${name}" and command_args="${iscsictl_flags}"
/etc/init.d/iscsid	iSCSI initiator daemon
/etc/init.d/jail	Manage system jails
/etc/init.d/kadmind	command_args="$command_args &"
/etc/init.d/kdc	command_args="$command_args --detach"
/etc/init.d/keyserv	command="/usr/sbin/${name}"
/etc/init.d/kfd	after network; keyword -shutdown
/etc/init.d/kldxref	Generate hints for the kernel loader
/etc/init.d/kpasswdd	command_args="$command_args &"
/etc/init.d/ldconfig	command=/sbin/ldconfig
/etc/init.d/local	Run /etc/rc.local and /etc/shutdown.local"
/etc/init.d/local_unbound	Local caching forwarding resolver
/etc/init.d/localmount	Mounts disks and swap according to /etc/fstab
/etc/init.d/lockd	command=/usr/sbin/rpc.lockd
/etc/init.d/lpd	Line printer spooler daemon
/etc/init.d/mdconfig	OpenRC -> rc.d redirect script, create and control memory disks
/etc/init.d/mdconfig2	Create and control memory disks (stage 2)
/etc/init.d/mixer	extra_commands="restore"
/etc/init.d/modules	Loads a user defined list of kernel modules.
/etc/init.d/motd	Update kernel info in /etc/motd; Must be done *before* interactive logins are possible to prevent possible race conditions.
/etc/init.d/mountd	command=/usr/sbin/mountd command_args=$mountd_flags name="Service remote NFS mount requests"
/etc/init.d/mountlate	Mount filesystems with \"late\" option from /etc/fstab
/etc/init.d/moused	Console Mouse Daemon
/etc/init.d/moused.ums0	Console Mouse Daemon
/etc/init.d/moused.ums1	Console Mouse Daemon
/etc/init.d/natd	Needed for network scripts
/etc/init.d/netmount	Mounts network shares according to /etc/fstab.
/etc/init.d/network	Until we can determine why devd is throwing some bogus
/etc/init.d/newsyslog	name="newsyslog" required_files="/etc/newsyslog.conf" command="/usr/sbin/${name}"
/etc/init.d/nfscbd	name="nfscbd" command="/usr/sbin/${name}"
/etc/init.d/nfsclient	command=/usr/sbin/rpc.statd; command_args=$lockd_args
/etc/init.d/nfsd	Load the nfsd kernel module
/etc/init.d/nfsuserd	NFSv4 User Services
/etc/init.d/nisdomain	Set NIS domain name
/etc/init.d/nscd	Name Service Cache Daemon
/etc/init.d/nsswitch	Name-service switch
/etc/init.d/ntpd	Network Time Protocol daemon
/etc/init.d/ntpdate	Set the date and time via NTP
/etc/init.d/pf	Packet Filter
/etc/init.d/pflog	Packet filter logging interface
/etc/init.d/powerd	Power Control Daemon
/etc/init.d/ppp	Point to point protocol connections
/etc/init.d/rarpd	Reverse ARP Daemon
/etc/init.d/rc-enabled	Starting and stopping local rc services
/etc/init.d/resolv	create /etc/resolv.conf from kenv
/etc/init.d/root	Mount the root fs read/write
/etc/init.d/routing	Routing setup
/etc/init.d/rpcbind	RPC program number mapper
/etc/init.d/runsvdir	command=/usr/bin/runsvdir
/etc/init.d/rwho	name="rwhod" rcvar="rwhod_enable" command="/usr/sbin/${name}"
/etc/init.d/s6-svscan	Creating s6 scan directory and stopping any remaining s6 services
/etc/init.d/savecache	Saves the caches OpenRC uses to non volatile storage
/etc/init.d/savecore	Saves a kernel dump.
/etc/init.d/sdpd	Bluetooth Service Discovery Protocol daemon
/etc/init.d/sendmail	Sendmail startup script
/etc/init.d/sshd	command=/usr/sbin/sshd
/etc/init.d/statd	command=/usr/sbin/rpc.statd
/etc/init.d/staticroute	Configures static routes
/etc/init.d/swap	Activating swap devices; Deactivating swap devices
/etc/init.d/syscons	Setting mode to $allscreen_flags for all screens
/etc/init.d/sysctl	BSD_sysctl()
/etc/init.d/syslogd	command=/usr/sbin/syslogd
/etc/init.d/timed	Time server daemon
/etc/init.d/tmp	Configure tmpfs
/etc/init.d/tmpfiles.setup	Set up tmpfiles.d entries
/etc/init.d/ubthidhci	command="/usr/sbin/usbconfig"
/etc/init.d/urandom	Initializes the random number generator.
/etc/init.d/var	NFS /var is not supported, unless NFS /var is part of diskless NFS /
/etc/init.d/watchdogd	name="watchdogd" command="/usr/sbin/${name}"
/etc/init.d/wpa_supplicant	find_wireless()
/etc/init.d/ypbind	NIS domain binding daemon
/etc/init.d/ypldap	NIS LDAP binding daemon
/etc/init.d/yppasswdd	Server for updating NIS passwords
/etc/init.d/ypserv	NIS database server
/etc/init.d/ypset	tell ypbind(8) which YP server process to use
/etc/init.d/ypupdated	name="ypupdated" command="/usr/sbin/rpc.${name}"
/etc/init.d/ypxfrd	NIS map transfer server
/etc/init.d/zfs	Starting ZFS
/etc/init.d/zfsd	name="zfsd" command="/usr/sbin/${name}"
/etc/init.d/zvol	Starting ZFS swap
Back to /etc/